Two people that have identical weight are holding onto a massless pole while standing on horizontal frictionless ice. 1)If the guy on the left starts to pull on the pole, where do they meet

Complete question:

For a galvanic cell to generate an electric current flowing from anode to cathode, what must be true?

(a) Electrons flow from the anode to the cathode

(b) Electrons flow from the more negatively charged electrode to the more positively charged electrode

(c) Electrons flow from higher potential energy to lower potential energy

(d) All of the above are true.

Answer:

(d) All of the above are true.

Explanation:

A galvanic or Voltaic cell is a primary type of electrochemical cell that is used to generate electrical energy from the chemical reactions that take place in it.

It consists of a positive electrode (cathode) and a negative electrode (anode) for the movement of charges.

(a) Electrons flow from the anode to the cathode. TRUE

Anode is the negative electrode and for electron current, electrons flow from negative electrode to positive electrode.

(b) Electrons flow from the more negatively charged electrode to the more positively charged electrode. TRUE

Based on electron current flow.

(c) Electrons flow from higher potential energy to lower potential energy. TRUE

The driving force of the electron flow is the potential difference. Electrons must flow from higher potential to lower potential.

All the options are correct, so we select option "D"

Answer:

22.87 m/s

Explanation:

Since the value of the height at which the divers jump off the cliff is not given,

Assuming that the height of the cliff above the ocean at which the divers jump = 26.7 m

Then;

The speed of the divers when they hit the ocean water can be determined by using the formula:

[tex]v^2 = 2gh \\ \\ v= \sqrt{2gh} \\ \\ v = \sqrt{2 \times 9.8 \times (26.7)} \\ \\ v \simeq 22.87 \ m /s[/tex]

Complete Question

The accepted speed of sound at atmospheric pressure and 0 *C is 331.5 m/s. The speed of sound increases 0.607 m/s for every *C. Calculate the speed of sound at the temperature of your room(70F) and compare your measured value to the accepted value.

Answer:

[tex]V_{Tc}=344.314m/s[/tex]

Explanation:

From the question we are told that:

Speed of sound at Temperature [tex]0 \textdegree[/tex] [tex]V_0=331.5m/s[/tex]

Rate of Speed increase [tex]\triangle V_{infty}=0.607[/tex]

Generally the equation for Temperature in Celsius is mathematically given by

 [tex]Tc=\frac{100}{180}(T_f-32)[/tex]

 [tex]Tc=0.56*38[/tex]

 [tex]Tc=21.11 textdegree C[/tex]

Therefore speed at Tc

 [tex]V_{Tc}=V_0+(Tc)( V_{infty})[/tex]

 [tex]V_{Tc}=331.5+(21.11)(0.607)[/tex]

 [tex]V_{Tc}=344.314m/s[/tex]

Answer:

Cause it gives us internet

Answer:

The answer is C. A change in a substance with no new substances being formed

Explanation:

I did the quiz.

The best definition of physical change is a change in a substance, with no new substances being formed. Hence, option C is correct.

A chemical substance's form, not its chemical composition, can change due to physical changes. In most cases, compounds cannot be separated into chemical components or simpler compounds; instead, mixtures are separated into their constituent compounds through physical changes.

Whenever something changes physically but not chemically, we say that something has changed physically. This is in contrast to the idea of a chemical change, which occurs when a substance's composition changes or when one or more compounds join or fragment to generate new substances. In general, physical means can be employed to undo a physical alteration. For instance, by letting the water evaporate, salt that has been dissolved in it can be reclaimed.

Therefore, this concludes that option C is correct.

To know more about Physical change:

#SPJ2

Answer:

time perion=1/frequency

so here time period =1/262

let wavelength be x

speed of sound=wave length/time period

342=x/1/262

342=262x

342/262=x

1.30=x

therefore wavelength=1.30 metre

Explanation:

Solution :

The conditions for the maximum in the Young's experiment is :

d sin θ = m λ,     where m = 0, 1, 2, 3, .....

The angle between the central maximum and the 1st order maximum can be determined by setting the m = 1. So,

d sin θ =  λ

[tex]$\theta = \sin^{-1}\left(\frac{\lambda}{d}\right)$[/tex]

Given : d = 100 λ

[tex]$\theta = \sin^{-1}\left(\frac{\lambda}{100 \lambda}\right)$[/tex]

[tex]$\theta = \sin^{-1}\left(\frac{1}{100}\right)$[/tex]

 [tex]$=0.573^\circ$[/tex]

  = 0.01 rad

Answer:

Z-number

Explanation:

The Z number is the number of protons in an atom, and this does not change when an isotope is created. I got it right on the test.

Answer:

speed=distance covered/time taken

=75/2

=37.5 km/hr

Explanation:

average speed = distance move/ time taken

= 75km/2h

= 37.5km/h

Answer:

81.47°

Explanation:

The forward force on the tire is the horizontal component of its weight along the incline mgcosФ. The frictional force along the incline is μmgsinΦ where mgsinΦ is the vertical component of the tire's weight along the incline.

Since the tire rolls without slipping, then

mgcosФ = μmgsinΦ where μ = coefficient of kinetic friction = 0.15 (since the tire is in motion) and Φ is the angle of the incline.

So, mgcosФ = μmgsinΦ

mgcosФ/mgsinΦ = μ

μ = cosФ/sinΦ

μ = 1/tanФ

tanФ = 1/μ

Φ = tan⁻¹(1/μ)

substituting into the equation, we have

Φ = tan⁻¹(1/0.15)

Φ = tan⁻¹(6.667)

Φ = 81.47°

Force is mass into acceleration

and pressure is force applied per unit area.

Answer: b force

Explanation:

yes because the world comin g up with more technique

Answer:

15 is the correct answer I.t.

Answer:

[tex]E=4.5*10^-^9J[/tex]

Explanation:

From the question we are told that:

Capacitor [tex]C=1.0nf[/tex]

Induction [tex]I=3.0mH[/tex]

Voltage [tex]V=3.0[/tex]

Generally the equation for Max charge on Capacitor  is mathematically given by

[tex]Q_{max}=C*V[/tex]

[tex]Q_{max}=1*10^{-9}*3[/tex]

[tex]Q_{max}=3*10^{-9}C[/tex]

Generally the equation for Energy in  magnetic field of the coil  is mathematically given by

Since

Energy stored in capacitor = Energy in magnetic field of the coil

Therefore

 [tex]E = (1/2)* C * V^2[/tex]

 [tex]E= 0.5 * 1*10^{-9} *3^2[/tex]

 [tex]E=4.5*10^-^9J[/tex]

Answer:

here's the pdf for it

IB QuestionbankExplanation:

Answer:

 F_net = 9.87 10⁻⁴ N

Explanation:

Let's use that force is a vector magnitude

         ∑ F = F₁₃ + F₂₃

De bold arfe vectros. The force is the electric force, we use that charges of the same sign repel and when the charges are of a different sign they attract

the charges q1 and q2 are negative and the charge q3 is positive with the positions y1 = 38 m, y2 = -7m, y3 = 16 m

       ∑ F = F₁₃ - F₂₃

       F_net = [tex]k \frac{q_1q_3}{r_{13}^2 } - k \frac{q_2q_3}{r_{23}^2 }[/tex]

in this case q₁ = q₂ = q

       F_net = k q q₃  (  )

      let's look for the distance

      r₂₃ = y₂ - y₃

      r₂₃ = -7 -16

      r₂₃ = - 23 m

      r₁₃ = 38 - 16

      r₁₃ = 22 m

let's calculate

      F_net = 9 10⁹ 24 26 10⁻¹² ( )

      F_net = 5.616 ( 1.758 10⁻⁴ )

      F_net = 9.87 10⁻⁴ N

Answer:

Endothermic

Explanation:

Took the test :^)

The endothermic process that absorbs 672 J from the surroundings.

In thermochemistry, an endothermic process is any process with an increase in the enthalpy H (or internal energy U) of the system.[1] In such a process, a closed system usually absorbs thermal energy from its surroundings, which is heat transfer into the system. It may be a chemical process, such as dissolving ammonium nitrate (NH4NO3) in water (H2O), or a physical process, such as the melting of ice cubes.

The term was coined by Marcellin Berthelot from the Greek roots endo-, derived from the word "endon"  meaning "within", and the root "therm" , meaning "hot" or "warm" in the sense that a process depends on absorbing heat if it is to proceed. The opposite of an endothermic process is an exothermic process, one that releases or "gives out" energy, usually in the form of heat and sometimes as electrical energy. Thus in each term (endothermic and exothermic) the prefix refers to where heat (or electrical energy) goes as the process occurs.

So Endothermic reaction is where heat energy is high inside the substance and reduces the thermal energy outside the substance (outside the substance the temperature drops and the temperature increases inside the substance.)

Learn more about endothermic process

https://brainly.com/question/20569774

#SPJ2

Answer:

Zero

Explanation:

It is given that the charge is uniformly spread at the surface of hollow spherical shells.

There is no charge with in the hollo shell. hence, with zero charge the  electric field intensity is also zero.

Thus,

Magnitude of the electric field strength inside the hollow shell at r is zero

Answer:

1,840,000 J

Explanation:

The energy required for a particular change in state is given by the specific latent heat. Specific latent heat is the amount of energy required to change the state of 1 ... of ice into 1 kg of water at its melting point of 0°C. The same amount of energy ... stored or released as the temperature of a system changes can be calculated.

Answer:

brightness that we observe from a star is related to the energy produced and the distance to the Earth

Explanation:

In stars, the color that we observe is directly related to the temperature of the star by the y of the Wien displacement.

             λ_{max} T = 2,898 10³

the brightness that we observe from a star is related to the energy produced and the distance to the Earth

Answer:

Explanation:

From the given information:

Let's assume that the missing function is:

s(t) = t³ - 6t², t ≥ 0

From part (b), we are to find the given  required terms when time t = 2

So; from the function s(t) =  t³ - 6t², t ≥ 0

[tex]velocity \ v(t) \ = \dfrac{d}{dt}s(t)[/tex]

[tex]velocity \ v(t) \ = \dfrac{d}{dt}(t^3 - 6t^2)[/tex]

[tex]velocity \ v(t) \ = 3t^2 - 12t[/tex]

[tex]acceleration a(t) = \dfrac{d}{dt}*v(t)[/tex]

[tex]acceleration a(t) = \dfrac{d}{dt}(3t^2 - 12 t)[/tex]

[tex]acceleration\ a(t) = 6t - 12[/tex]

At time t = 2

The position; S(2) = (2)² - 6(2)²

S(2) = 8 - 6(4)

S(2) = 8 - 24

S(2) = - 16 ft

v(2) = 3(2)² - 12 (2)

v(2) = 3(4) - 24

v(2) = 12 - 24

v(2) = - 12 ft/s

speed = |v(2)|

|v(2)|  = |(-12)|

|v(2)| = 12 ft/s

acceleration = 6t - 12

acceleration = 6(2) - 12

acceleration =  12 - 12

acceleration =  0 ft/s²

Explanation:

this is your answer I hope it is helpful please mark me brainly

Answer:

The tension in the horizontal string is 25.2 N.

Explanation:

mass, m = 1.2 kg

Angle, A = 65 degree

The tension in the string is T.

So, T cos A = m g

T x cos 65 =  1.2 x 9.8

T x 0.4226 = 11.76

T = 27.83 N

Tension in the horizontal string, T' = T sin A = 27.83 x sin 65 = 25.22 N

Answer:

Explanation:

See the figure attached . T₁ and T₂ are tension in the inclined and horizontal string .

The vertical component of T₁ will balance weight and horizontal component will balance the tension T₂.

T₁ sin 65 = mg and T₁ cos 65 = T₂

Dividing ,

Tan 65 = mg / T₂

T₂ = mg / tan 65

= 1.2 x 9.8 / 2.1445

= 5.5 N

Given :

Sally travels by car from one city to another. She drives for 30 min at 80 km/hr, 12.0 min at 105 km/hr, and 45 min at 40.0 km/hr.

To Find :

The total distance traveled.

Solution :

Total distance traveled is given as sum :

Distance = sum of  product of speed and time

D = (v₁ × t₁) + (v₂ × t₂) + (v₃ × t₃)

Putting all given value in this we get :

[tex]D = 80\times \dfrac{30}{60} + 105 \times \dfrac{12}{60} + 40\times \dfrac{45}{60}\\\\D = 91\ km[/tex]

Hence, this is the required solution.

Answer:

a) Ink X is likely to be pure because it only contain 1 spot.

b) The chromatography tell us about ink Y that it is a mixture as it contain more than 1 spot.

c) The three different spots are separated out from ink Y at different heights beacaus different substance have different solubility.

The different spots from Y are found at various heights because they represent different compounds.

The term chromatography has to do with a method of separating the component of a substance. The term chromatography originally means color writing.

We can see that the pure ink is the ink marked X. We can see from the chromatogram that Y is a mixture of colors. The different spots from Y are found at various heights because they represent different compounds.

Learn more about chromatography:https://brainly.com/question/26491567?

#SPJ6

Answer:

protons+neutrons= mass number, so if the mass number is 13 and protons are 6 its 13-6=7 neutrons

Explanation:

mass number: the sum of the number of protons and

neutrons in an atom

this is key as it explains that protons+neutrons= mass number, so if the mass number is 13 and protons are 6 its 13-6=7 neutrons

Answer:

[tex]resultant \\ \: F = \sqrt{ {300}^{2} + {600}^{2} } \\ = \sqrt{450000} \\ = 670.82 \: newtons[/tex]

Answer:

Option A (69.56 newtons) is the appropriate solution.

Explanation:

According to the question,

On the X-axis,

⇒ [tex]T_1Cos30^{\circ}-T_2Cos60^{\circ}=0[/tex]

or,

    [tex]T_1Cos 30^{\circ}=T_2Cos60^{\circ}[/tex]

On substituting the values, we get

      [tex]T_1\times \frac{\sqrt{3} }{2}=T_2\times \frac{1}{2}[/tex]

      [tex]T_1\times \sqrt{3} =T_2[/tex]....(equation 1)

On the Y-axis,

⇒ [tex]T_1Sin30^{\circ}+T_2Sin60^{\circ}=139.3 \ N[/tex]

                        [tex]\frac{T_1}{2} +\frac{\sqrt{3} }{2} =139.2 \ N[/tex]

                    [tex]T_1+\sqrt{3}T_2=139.2\times 2[/tex]

From equation 1, we get

           [tex]T_1+\sqrt{3}\times \sqrt{3}T_1 =278.4 \ N[/tex]

                        [tex]T_1+3T_1=278.4 \ N[/tex]

                                [tex]4T_1=278.4 \ N[/tex]

                                  [tex]T_1=\frac{278.4}{4}[/tex]

                                       [tex]=69.6 \ N[/tex]  

Answer:

69.58

Explanation:

Answer:

The coefficient of kinetic friction on the floor is 0.138

Explanation:

Given;

mass of the crate, m = 450 kg

force applied by the first worker, F₁ = 380 N

force applied by the second worker in the same direction as the first worker, F₁ = 230 N

frictional force opposing the motion of the box = -[tex]F_k[/tex]

Apply Newton's second law of motion;

∑F = ma

[tex]F_1 + F_2 - F_k = ma[/tex]

If the crate slides with constant speed, acceleration is zero (0).

[tex]F_1 + F_2 - F_k = ma = 0\\\\F_1 + F_2 - F_k = 0\\\\F_k = F_1 + F_2\\\\\mu _kmg= F_1 + F_2\\\\\mu _k = \frac{F_1 + F_2}{mg} \\\\\mu _k = \frac{380 + 230}{450 \times 9.8} \\\\\mu _k = 0.138[/tex]

Therefore, the coefficient of kinetic friction on the floor is 0.138

Answer:

v = 19 m/s

Explanation:

       [tex]\Delta h = \frac{1}{2} * g * t^{2} (1)[/tex]      

       [tex]t = \sqrt{\frac{2*21m}{9.8m/s2}} = 2.1 s (2)[/tex]

       [tex]t = \sqrt{\frac{2*7m}{9.8m/s2}} = 1.2 s (3)[/tex]

       [tex]t_{2} = t_{tot} - t_{1} = 2.1 s - 1.2 s = 0.9 s (4)[/tex]

       [tex]v_{o} =\frac{(\Delta h -\frac{1}{2}*g*t^{2})}{t_{2} } = \frac{(21m-(\frac{1}{2}*9.8m/s2*(0.9s)^{2}) ) }{(0.9m)} = 19.0 m/s (6)[/tex]