The ball has more mass being pumped with air. So, option (C) is correct answer.
What is mass?In physics, mass is a quantitative measurement of inertia, a basic characteristic of all matter. It essentially refers to a body of matter's resistance to changing its speed or location in response to the application of a force. The change caused by an applied force is smaller the more mass a body has. The kilogram serves as the unit of mass in the International System of Units (SI).
As the amount of air is added to the basketball by pumping it up with air, the mass of air is also added with the basketball. Hence, the ball has more mass now.
Learn more about mass here:
https://brainly.com/question/19694949
#SPJ2
why transparent object don't form a shadow
Explanation:
Transparent objects do not form shadows. The light passes completely from the transparent objects thus these objects will not form shadow. ... In such objects, the light gets refracted thus, such objects forms shadow. The refraction is also the reason why we can see such objects.
Explanation:
cause it pass the light coming from the source of light
Q
16) A student pushes four students on skateboards. She pushes as hard as she can each time. She measures how far each student
goes before stopping. Which is most likely to happen?
A) The biggest student will go the furthest.
B) The smallest student will go the furthest.
c) Each student will go further than the last.
D) All four student will go about the same distance.
Answer:
B
Explanation:
It would be diffrent if on a downward slope but assuming your going straight it would be the smallest student.
The smallest student will go furthest if all the students push with the same amount of force. Therefore, option (B) is correct.
What is Newton's second law of motion?According to Newton’s second law of motion, the force equals the mass of the body times the acceleration of that body when the body has constant mass.
This law states that the acceleration of a body depends on two variables. The first one is the mass of the body and the force acting on the body. The acceleration of a body is directly proportional to the net force acting on the body and inversely proportional to the mass.
Newton’s second law can be expressed in the equation as shown below:
[tex]F= ma[/tex]
or,
[tex]a=\frac{F}{m}[/tex]
Acceleration or gaining speed of a body happens when a force acts on it.
When all four students are pushed by the same amount of force then the acceleration of the smallest student will be greatest as the mass of the smallest student will be least.
Therefore, the smallest student will go furthest in comparison to all other students.
Learn more about Newton's second law of motion, here:
brainly.com/question/13447525
#SPJ5
how is an earthquake's origin and intensity identified?
Answer:
using a seismograph
Explanation:
Two parallel plates have an area of
0.00100 m^2. How much charge
must you place on them to create a
1000 N/C field between the plates?
(The answer is *10^-12 C. Just fill
in the number, not the power.)
Answer:
8.85
Explanation:
The computation of the charge that must place on them in order to create 1000 N/C field between the plates is shown below:
We know that
E = (Q/A) ÷ E_o
1000 = Q ÷ 0.01×8.85× 10^-12
Q = 8.85 × 10^-12
So,
The answer is 8.85
The above formula should be applied so that the correct value could come
And, the same would be relevant
Answer:
8.85
Explanation:
acellus
Please help me ; - ;
Match the food choice with its potential long-term result.
1. eating a piece of cake with 8 grams of fat
2. eating an egg salad sandwich on whole grain bread with 9 grams of fat
3. eating a cheeseburger with 48 grams of fat
A. heart disease
B. obesity
C. weight loss
Answer:
2 = C
3 = B
1 = A
Explanation:
What is the electrical power when the current is 20 amps and the voltage is 15 volts? *
A. 1.33 watts
B. 300 watts
C. 35 watts
Objects in space appear to change position as they orbit the sun. What is this phenomenon called? *
A. Nebular theory
B. Stellar theory
C. Parallax
The moon lacks an atmosphere because its gravity is too STRONG and forces gas molecules into outer space. *
A. True
B. False
Heat pumps move heat from __________ to __________ areas & REQUIRES energy.
A. cold, hot
B. hot, cold
Answer:
The power is 300 watts.
Explanation:
Given that,
Current, I = 20 a
Voltage, V = 15 volts
The electrical power of any device is given by the product of current and voltage. It can be given by :
P = VI
So,
P = 15 × 20
= 300 W
So, the power is 300 watts.
Why is the EM important?
Answer:
It is important because it furnishes information about the composition, the temperature and maybe the mass or relative velocity of the body that emits or absorbs it.
Explanation:
NEED HELP The main difference between kinetic energy and potential energy is thatSingle choice.
(2 Points)
kinetic energy involves position, and potential energy involves motion.
kinetic energy involves motion, and potential energy involves position.
although both energies involve motion, only kinetic energy involves position.
although both energies involve position, only potential energy involves motion.
Answer:
kinetic energy involves motion, and potential energy involves position.although both energies involve position, only potential energy involves motion.hope it is helpful to you ☺️☺️✌️
You have your headphones turned all the way up (100 dB).
a. If you want them to sound half as loud, to what decibel level must the music be set?
b. If you want them to sound 1/4 as loud, to what decibel level must the music be set?
Answer:
a. 90 dB
b. 80 dB
Explanation:
The given parameter of the sound is as follows;
The level to which the headphones are tuned = All the way up
The intensity of the sound of the headphones when tuned all the way up = 100 dB
a. The relationship between level change in loudness, ΔL, and the ratio of loudness, 'x', is presented as follows;
ΔL = 10·log₂(x) ≈ 33.22·log(x)
Therefore, for a sound to be half as loud, we have x = 1/2, therefore;
ΔL = 10·log₂(1/2) = 10·log₂(2⁻¹) = -10 ≈ 33.22·log(1/2)
The change in the intensity level for a sound half as loud, ΔL = -10 dB
Given that the sound was initially at 100 dB, the new level for a sound half as loud = 100 dB + ΔL = 100 dB - 10 dB = 90 dB
The decibel level the music must be set for a sound half as loud = 90 dB
b. In order for the sound to be 1/4 as loud, we have;
ΔL = 10·log₂(1/4) = 10·log₂(2⁻²) = -20
Therefore, the change in the level of the sound intensity level, ΔL by -20 dB will given a sound that is 1/4 as loud
The initial intensity level = 100 dB
The intensity level for a sound 1/4 as loud = 100 dB - 20 dB = 80 dB
Which statement best describes the relationship between an object's density and its index of refraction?
A. As the mass per unit volume of the substance increases, the refractive index decreases.
B. As the mass of the object increases, the refractive index decreases.
C. As the physical density of the substance increases, the refractive index increases
D. As the optical density increases, the refractive index increases
Answer:
D. As the optical density increases, the refractive index increases
Answer: the answer is D
Explanation: I took the test
A 2800 kg truck moving at 12 m/s to the right hits a stopped 1100 kg car. What is the combined velocity the moment they stick together?
Answer:
The combined velocity is 8.61 m/s.
Explanation:
Given that,
The mass of a truck, m = 2800 kg
Initial speed of truck, u = 12 m/s
The mass of a car, m' = 1100 kg
Initial speed of the car, u' = 0
We need to find the combined velocity the moment they stick together. Let it is V. Using the conservation of momentum.
[tex]m_1v_1+m_2v_2=(m_1+m_2)V\\\\V=\dfrac{m_1v_1+m_2v_2}{(m_1+m_2)}\\\\V=\dfrac{2800\times 12+0}{2800+1100}\\\\V=8.61\ m/s[/tex]
So, the combined velocity is 8.61 m/s.
The density of silver is 10.49 g/cm3. If a sample of pure silver has a volume of 12.993 cm3, what is the mass?
Explanation:
Density=mass/volume
mass=x
10.49=X/12.99
X=10.49 X12.99
X=136.29657
mass=136.3g/cm^3
I hope it helped.
why are nuclear reactions used in nuclear power plants
Answer:
Nuclear reactors are the heart of a nuclear power plant. They contain and control nuclear chain reactions that produce heat through a physical process called fission. That heat is used to make steam that spins a turbine to create electricity.
Answer:
A nuclear power plant's heart is made up of nuclear reactors. They contain and regulate nuclear chain reactions, which produce heat via a physical process known as fission. This heat is converted to steam, which powers a turbine to generate energy.
Tom used 75 N of force to push a box 3 meters across the floor. How much work did he do?
0.12 J
25 J
1
78J
225 J
Answer:
It must be 225 J.
Explanation:
According to
Work done = Force × distance travelled
= 75 × 3
= 225 J
This answer is taken so since no angles are stated in the question.
URGENT HELP PLS
1. Given a force-displacement curve as shown in the figure, what does the area of the region enclosed by the curve represent?
A. The force acting on the object
B. The displacement of the object
C. The magnitude of the coefficient of static friction
D. The work done on the object by the force
Explanation:
work done is equals to force into displacement in the direction of force
Ans: D
Un automóvil se mueve 80 m en 40 s con una velocidad constante. ¿Cuál es la velocidad del automóvil? Ayuda plissssssssssssssssssssss
Answer:
Velocidad = 2 m/s
Explanation:
Dados los siguientes datos;
Distancia = 80 m
Tiempo = 40 s
Para encontrar la velocidad del automóvil;
La velocidad se puede definir como la tasa de cambio en el desplazamiento (distancia) con el tiempo.
La velocidad es una cantidad vectorial y, como tal, tiene magnitud y dirección.
Matemáticamente, la velocidad viene dada por la ecuación;
[tex] Velocidad = \frac {distancia} {tiempo} [/tex]
Sustituyendo en la fórmula, tenemos;
Velocidad = 80/40
Velocidad = 2 m/s
Pravat exerts a force of 30 N to lift a bag of groceries 0.5 m. How much work did Pravat do on the bag?
Answer:
15 J
Explanation:
Work = Force x Distance
15= 30 x 0.5
Have a blessed day!
Answer:Pravat did 15 J of work
Explanation:
A prism is often used to show the different wavelengths of light or colors that can be found in white light. In one paragraph, using your own words, explain how the prism causes these colors to appear. Be sure to use proper spelling, grammar, and punctuation.
Answer:
A prism causes the different wavelengths of light or colors that can be found in white light because the prism is white, and white light contains all colors in the visible light spectrum. So an object that reflects all the colors in the visible light spectrum will appear white in color because white light contains all colors in the visible light spectrum.
Explanation:
I hope this helps! I just did a test with this question and I got the answer right! This is the answer that I put. Good luck :)
Our founding fathers got many of their ideas about a republican
government from the Romans.
A: True
B: False
Read the text again
A pressure of 7x10^5N/m is applied to all surfaces of a copper cube (of sides 25 cm) what is the fractional change in volume of a cube? ( for copper B= 14x10^10N/m)
Answer:
The correct solution is "[tex]5\times 10^{-4}[/tex] %".
Explanation:
The given values are:
Pressure,
[tex]\Delta P=7\times 10^5 \ N/m[/tex]
for copper,
[tex]B=14\times 10^{10} \ N/m[/tex]
As we know,
The Bulk Modulus (B) = [tex]\frac{\Delta P}{-\frac{\Delta V}{V} }[/tex]
or,
The decrease in volume will be:
= [tex](\frac{\Delta V}{V})\times 100 \ percent[/tex]
then,
= [tex]\frac{\Delta P}{B}\times 100 \ percent[/tex]
On putting the values, we get
= [tex]\frac{7\times 10^5}{14\times 10^{10}}\times 100 \ percent[/tex]
= [tex]5\times 10^{-4} \ percent[/tex]
how does current flowing through a resistor affect the temperature
What would make oppositely charged objects attract each other more? increasing the positive charge of the positively charged object and increasing the negative charge of the negatively charged object decreasing the positive charge of the positively charged object and decreasing the negative charge of the negatively charged object increasing the distance between the positively charged object and the negatively charged object maintaining the distance between the positively charged object and the negatively charged object
Answer:
A.
Explanation:
I did the test :D
Which two types of electromagnetic waves have higher frequencies than the waves that make up ultraviolet light?
o radio waves and infrared light
O visible light and X-rays
O microwaves and gamma rays
gamma rays and X-rays
Answer:
Gamma rays and x rays
Explanation: just took the test
Gamma rays and X-rays have higher frequencies than the waves that make up ultraviolet light. Hence option D is correct.
What is Electromagnetic Spectrum ?Electromagnetic spectrum is nothing but the range of wavelengths or frequencies on which electromagnetic radiation extend. it is whole distribution of electromagnetic waves according to frequency or wavelength. Electromagnetic wave is nothing but a photon which carries energy. Photon wave has frequency, wavelength as well as amplitude.
Electromagnetic spectrum is show in figure.
There is inverse relation between wavelength and frequency as υ = c/λ
where υ is the frequency, λ is the wavelength and c is the speed of light.
as wavelength increases, frequency decreases vice verse.
In this figure we can see that radio waves has highest wavelength hence it has lowest frequency. X ray and gamma rays has lowest wavelength hence it has highest frequency.
Hence option D is correct.
To know more about electromagnetic waves, click :
https://brainly.com/question/18165320
#SPJ7.
which feature is used to classify galaxies
age
color
shape
size
Answer:Shape
I took the quiz
Answer:shape
Explanation:
I took the quiz
An astronaut lands on an alien planet. He places a pendulum (L = 0.200 m) on the surface and sets it in simple harmonic motion, as shown in this graph.
(a) What is the period and frequency of the pendulum’s motion?
(b) How many seconds out of phase with the displacements shown would graphs of the velocity and acceleration be?
(c) What is the acceleration due to gravity on the surface of the planet in? Determine the number of g-forces.
Show any necessary calculations.
Which wave has the lowest amplitude?
Wave D has the lowest amplitude. The highest point of a wave is called amplitude.
What is amplitude?The distance between from the crest of a wave to the next crest is known as the amplitude. It is denoted by a.
The standard equation for the SHM is found as;
[tex]\rm y = asin \omega t[/tex]
Where, a represent the amplitude of the wave.
In the wave D it is observed that the distance from center axis to the highest point of the wave is smallest. Hence, wave D has the lowest amplitude.
To learn more about the amplitude, refer to the link;
https://brainly.com/question/8662436
#SPJ2
Answer:
To summarize what the expert answer said, it's the last box.
Explanation:
Te agrada realizaTe agrada realizar actividades físicas?, ¿por qué?r actividades físicas?, ¿por qué?
A crane lifts a load of 15000N to a height 40m in 50 seconds. Calculate the power of the crane
Answer:
P = 12000 W
Explanation:
General data:
F = 15000 N d = 40 mt = 50 sP = ?Work is force times unit of distance. So in order to calculate the power we must first calculate the work.
Formula:
[tex]\boxed{\bold{W=\frac{F}{d}}}[/tex]Replace and solve
[tex]\boxed{\bold{W=\frac{15000\ N}{40\ m}}}[/tex][tex]\boxed{\bold{W=600000\ J}}[/tex]once the work is found, we proceed to find the power according to the formula:
[tex]\boxed{\bold{P=\frac{W}{t}}}[/tex][tex]\boxed{\bold{P=\frac{600000\ J}{50\ s}}}[/tex][tex]\boxed{\boxed{\bold{P=12000\ W}}}[/tex]The power of the crane is 12000 Watts.
Greetings.
what are the two
factors in which weight of object depends?
Answer:
An object's weight depends on its mass (the amount of matter it consists of) and the strength of the gravitational pull.