is the amplitude just 2? Or do I combine all of them and do 6?
Answer:
combine them all
6 m
Explanation:
The velocity (in m/s) of a free-falling object as a function of the height from which it is dropped is
v = 25 h. So, ignoring the air resistance, at what height should you drop a watermelon if you want
it to hit the ground at 50 m/s?
Answer:
Falling objects form an interesting class of motion problems. For example, we can estimate the depth of a vertical mine shaft by dropping a rock into it and listening for the rock to hit the bottom. By applying the kinematics developed so far to falling objects, we can examine some interesting situations and learn much about gravity in the process.
The most remarkable and unexpected fact about falling objects is that, if air resistance and friction are negligible, then in a given location all objects fall toward the center of Earth with the same constant acceleration, independent of their mass. This experimentally determined fact is unexpected because we are so accustomed to the effects of air resistance and friction that we expect light objects to fall slower than heavy ones.
A hammer and a feather will fall with the same constant acceleration if air resistance is considered negligible. This is a general characteristic of gravity not unique to Earth, as astronaut David R. Scott demonstrated on the Moon in 1971, where the acceleration due to gravity is only 1.67 m/s^2.
In the real world, air resistance can cause a lighter object to fall slower than a heavier object of the same size. A tennis ball will reach the ground after a hard baseball is dropped at the same time. (It might be difficult to observe the difference if the height is not large.) Air resistance opposes the motion of an object through the air, while friction between objects, such as between clothes and a laundry chute or between a stone and a pool into which it is dropped, also opposes motion between them. For the ideal situations of these first few chapters, an object falling without air resistance or friction is defined to be in free-fall.
Hope this helps, have a nice day/night! :D
Lloyd is standing on a scaffolding 12 meters above the ground to clean the windows of a tall building. His bucket, which has a mass of 0.5 kilograms, falls off the edge of the scaffolding. Calculate the bucket’s kinetic and potential energy when it is 4 meters above the ground. Also calculate its velocity at this point.
Answer:
.............................
A 4.6 kg bucket of water is raised from a well by a rope. The acceleration of gravity is 9.8 m/s 2 . If the upward acceleration of the bucket is 3 m/s 2 , find the force exerted by the rope on the bucket. Use g
Hi there!
If we sum the forces acting on the bucket:
∑F = T (upward) - Mg (downward)
Thus:
ma = T - mg
We can rearrange for T:
ma + mg = T
Plug in the given values:
4.6(3 + 9.8) = T = 58.88 N
The drone can fly for 25 minutes before the battery needs recharging. the power output of the battery is 65.0 watts. calculate the maximum energy stored by the battery
help please!! needed asap!!
Answer:
stored Energy = Power x time = 65 x 25x 60 = 105.6 Kjoules
Select the correct answer.
When rocks containing copper are oxidized, they tend to turn from red to green. Based on this information, what evidence
would best support the theory that oxidation could not have occurred in Earth's early atmosphere?
Rocks from early Earth that contained copper are green in color.
There are no copper-containing rocks from early Earth.
Rocks from early Earth that contained copper are red in color.
All copper minerals were converted to iron minerals.
Answer:
Rocks from early Earth that contained copper are red in color
Explanation:
"Copper, a red mineral, reacts with oxygen to form a green-colored compound. In early years, rocks containing copper were red. This fact shows that there was no oxygen in the early atmosphere to oxidize red copper into the green-colored compound."
Please slove this i need answer fast
Answer:
I am not quite sure....
Explanation:
Explanation:
basically i, say the answer is w
A 10 kg box is motionless on the floor. If the coefficient of static friction is 0.4 and the coefficient of kinetic friction is 0.3 (between the box and the floor), find the force required to start the block in motion
Please I need help ❤️
The force required to start the block in motion is equal to 39.2 Newton.
Given the following data:
Mass of box = 10 kgCoefficient of static friction = 0.4 Coefficient of kinetic friction = 0.3To determine the force required to start the block in motion:
Note: The force that is required to start the block in motion must be greater than or equal to the force of static friction.
Mathematically, the force of static friction is given by the formula;
[tex]Fs = uFn = umg[/tex]
Where;
Fs represents the force of static friction.μ represents the coefficient of friction.[tex]F_n[/tex] represents the normal force.g is the acceleration due to gravity.m is the mass of an object.Substituting the given parameters into the formula, we have;
[tex]F_s = 0.4 \times 10 \times 9.8\\\\F_s = 4 \times 9.8\\\\F_s = 39.2\;Newton[/tex]
Read more on force of static friction here: https://brainly.com/question/25686958
if a balloon is squeezed, what happens to the pressure of the gas inside the balloon?
Answer: By squeezing the balloon, you reduce the space the gas particles can occupy. As the particles are pushed a bit closer together, they collide with more, so the pressure from the moving gas particles increases. If the volume increases, its pressure decreases.
A plane flying above the ground has 60,000 joules of kinetic energy and 6,000 joules off gravitational potential energy. How much mechanical energy does the plane have?
Answer:
66,000J
Explanation:
Mechanical energy = Gravitational energy + Kinetic Energy
ME = 6,000 + 60,000 = 66000 J
Name some devices we use to make measurements
Answer:
Explanation:
Ruler. A steel ruler aids the measurement and layout of straight lines. The ruler, also called "straightedge" or "straight-edged ruler," is a long, thin strip of wood, metal or plastic marked with increments of measurement.
Measuring Tape. The modern measuring tape's roughly palm-sized casing contains a coiled strip of metal marked with increments of measurement. The metal strip, called "tape," attaches to a spring which automatically retracts the tape into the casing following use.
Walking Tape Measure. The walking tape measure, also called "surveyor's measure," records the distance traveled by a wheel. An operator pushes the measure's wheel, similar to a bicycle wheel, by a handle as an attached ticker box displays feet or meters in the same format as a car's odometer.
Laser Measure. The laser measure offers point and shoot distance measurement. In its most basic form, a laser measure is a hand-held electronic device with a digital display.
a spherical conductor of radius 10cm contains 10 mui c charge calculate the surfacecharge density
(a) Since the charge at any point inside sphere is zero.
by Gauss law,E=0.
(b) Just outside, E=q/4πϵ o r 2 so, E=10 5 NC −1
(c) q=1.6×10 −7 C r=18 cm E=q/4πϵ o r 2 E=4.4×10 4 NC −1
Which element is in the 3rd period and group 16?
Answer:Thus for n=1 number of electrons is 2 and for n=2 the number of electrons is 8. Hence the electronic configuration of the element X is 2,8,6 and its atomic number is 16. In the Modern Periodic Table, the element Sulphur has atomic number 16. So, the solution is that the element X is Sulphur and it is non metallic.
Answer:
Explanation:
Answer: Thus for n=1 number of electrons is 2 and for n=2 the number of electrons is 8. Hence the electronic configuration of the element X is 2,8,6 and its atomic number is 16. In the Modern Periodic Table, the element Sulphur has atomic number 16. So, the solution is that the element X is Sulphur and it is non metallic.
in an rfid system, where would the unique data identifying an item typically be found?
In a radio frequency identification (RFID) system, the unique data identifying an item are typically found in: tags.
What is an RFID system?
RFID is an acronym for radio frequency identification.
A RFID system can be defined as an automatic, wireless, identification technology (device) that is typically designed to allow end users store and retrieve information, especially through the use of an electromagnetic field.
The operational benefits of an RFID system:
Generally, a radio frequency identification (RFID) system is used for the following:
1. To identify an item or individual.
2. To trace and tracking an item or individual.
3. To track an item or individual.
The components of an RFID system:
An RFID system is a wireless, identification technology (device) that comprises two (2) main components and these are:
ReadersTagsTags refer to small objects containing an antenna and a chip (smart barcodes) that are used to automatically identify an item or individual they are embedded in or attached to.
In conclusion, the unique data that are used in identifying an item are typically found in tags.
Read more on RFID tags here: https://brainly.com/question/24167692
A boy standing on a bridge 150m above the canyon floor throws a stone downward with a speed of 20.0m/s.
A) with what velocity will it hit the ground?
B) How long will it take to descend?
Answer:
57.97m/s
12.1s
Explanation:
Use one of the key equations of accelerated motion and sub in the values
vf^2=vi^2+2aΔd
vf^2=(20)^2+(2*9.8)(150)
vf^2 = 3340
vf = 57.79m/s (square rooted both sides)
now use another equation
Δd = (vi+vf/2)Δt
and rearrange for Δt
Δt = (2Δd-vf)/vi
sub in values
Δt = (2*150-57.79)/20
Δt = 12.1s
mark me as brainliest if this helped!
please help me solve this and give an explanation
Answer:
6.5
Explanation:
Because 1.5+5=6.5
What nation recently blew up one of its own satellites as part of a missile test, triggering a warning from the u.s. over a potentially dangerous debris field?
Answer:
Russia
Explanation:
my answer was deleted for no reason. apparently i was violating community guidelines when i wasnt. anyways, the answer is russia...
a person would weigh less on Mercury than on planet blank because blank
Answer:
Earth because of greater gravity
Josh and jake are both helping to build a brick wall which is 6 meters in height. They each lay 250 bricks, but josh finishes this task in 3 hours while jake requires 4.5 hours to complete his part. Who does more work, or do they both do the same amounth? Who has more power? Explain.
A box of mass 6.0 kg is accelerated from rest
across a floor at a rate of 6.0 m/s² for 9.0 s.
Find the network done on the box
[tex]\text{Given that },\\\text{Mass, m = 6 kg}\\\\\text{Acceleration, a = 6 } \text{m} \text{s}^{-2}\\\\\text{Time, t=9 sec}\\\\\text{Displacement, }s=ut + \dfrac 12 at^2 = \dfrac 12 at^2 = \dfrac 12 \times 6 \times 9^2 = 243 ~m}\\\\\ \text{Work,} ~W = Fs = mas = 6 \times 6 \times 243 = 8748 ~ J}[/tex]
Hi there!
We know that:
[tex]W = \Delta KE = \frac{1}{2}m(\Delta v)^2[/tex]
We can begin by solving for the final velocity using the equation:
[tex]v_f = v_i + at[/tex]
The box starts from rest, so:
[tex]v_f = at\\\\v_f = 6(9) = 54 m/s[/tex]
Now, we can find the kinetic energy:
[tex]KE = \frac{1}{2}mv^2\\\\KE = \frac{1}{2}(6)(54^2) = 8748 J[/tex]
Thus:
[tex]W = \Delta KE\\\boxed{W = 8748 J}[/tex]
What torque will increase angular velocity of a solid cylinder of mass 16 kg and diameter 1 m from zero to 120 rpm in 8 s?
a)π/4Nm
b)π/2Nm
c)π/3Nm
d)πNm
what is the relationship between area, force, and pressure?
Answer: Pressure is proportional to force and inversely proportional to area.
Explanation:
please solve due is today....asap please
Answer:
a)object is in uniform motion
Explanation:
velocity is constant.and a=0
body is in uniform motion.
BRAINLIST PLS
If the velocity is 50 and the time is 5 seconds what is the acceleration?
Just divide the both, you will get the answer!
does it sound rude?
im sorry for that!
Answer:
10
Explanation:
A rock from a volcanic eruption is launched straight up into the air with no air resistance.
Which one of the following statements about the rock while it is in the air is correct? *
(0.5 Points)
On the way up, its acceleration is downward and its velocity is upward. At the highest point both its velocity
and acceleration are zero.
On the way down, both its velocity and acceleration are downward. At the highest point both its velocity and
acceleration are zero.
The acceleration is downward all points in the motion, except that the acceleration is zero at the highest
point.
The acceleration is downward at all points in the motion
Throughout the motion, the acceleration is downward, and the velocity is always in the same direction as the
acceleration
Answer:
D. The acceleration is downward at all points in the motion
Explanation:
:D
PLEASE PLEASE PLEASE HELP ME!!!
Answer: Levers
Explanation: Levers lifte
the machines arm
A ball is launched from a slingshot. As the ball travels along its trajectory, what force(s) are acting on it? Select all that apply.
Group of answer choices
Force of air and gravitational force are acting on the ball when launched from the slingshot.
When a ball is launched from a slingshot, during its travel force of air as well as gravitational force are acting on the ball because there is air which moves opposite to the motion of a ball whereas the force of gravity attracts the ball downward.
The force of air slows down the motion of the ball while on the other hand, the force of gravity brings the ball to the ground due to attraction. If these two forces are not present then the ball continues its motion forever so we can conclude that force of air and force of gravity are acting on the ball when launched from the slingshot.
Learn more: https://brainly.com/question/25533186
A photograph is 25 cm wide and 20 am hide. It might be reduced to fit a space that is 8 cm high. Find the wridth of reduced photographed.
Answer:
10cm
Explanation:
25/20=x/8
cross multiply;
200=20x
x=10
A ceiling fan is turned on and reaches an angular speed of 120 rev/min in 20 s. It is then turned off and coasts to a stop in an additional 40 s. In the one minute of rotation, through how many revolutions did the fan turn?.
Hi there!
We can first find the angular displacement of the first 20 seconds by finding the angular acceleration.
Begin by converting 120 rev/min to rev/sec:
120 rev/min × 1 min/60 sec = 2 rev/sec
ω = αt
2 = 20α
α = 0.1 rev/sec²
θ = ωit + 1/2αt²
The fan starts from rest, so:
θ = 1/2αt²
θ = 1/2(0.1)(20²) = 20 revolutions
Now, for the next 40 seconds, we can find the fan's deceleration:
ωf = ωi + αt
0 = 2 + αt
-2 = 40α
α = -0.05 rad/sec²
Use the above equation:
θ = ωit + 1/2αt²
θ = 2(40) + 1/2(-0.05)(40²) = 80 - 40 = 40 rev
θ = 4800 - 2400 = 2400 revolutions
Add the two:
θtotal = 20 + 40 = 60 revolutions
A 12 N force is used to extend a spring with a spring constant of 84 N/m. Calculate the extension of the spring.
Answer:
72n
Explanation: