The specific heat of water is the amount of energy required to heat one kilogramme of water from 0°C to 100°C. The specific heat of water is 1 calorie/gram/degree Celsius. The specific heat of water is 1 calorie/gram/degree Celsius.
What is specific heat?
Also known as specific heat, this term refers to the amount of energy required to increase a substance's temperature by one degree Celsius in one gramme. The units of specific heat are typically calories and joules per gramme per degree Celsius. Consider the specific heat of water, which is 1 calorie (or 4.186 joules) per gramme per degree Celsius. Joseph Black, a Scottish scientist, discovered that equivalent masses of various substances required different amounts of heat to elevate them over the same temperature range, which led him to establish the concept of specific heat. French physicists Pierre-Louis Dulong and Alexis-Thérèse Petit demonstrated in the early 19th century that it is feasible to determine a substance's atomic weight by measuring its specific heat.
To learn more about specific heat
https://brainly.com/question/13260450
#SPJ4
determine the force in members cd, cj, kj, and dj of the truss which serves to support the deck of a bridge. state if these members are in tension or compression.
Considering the equilibrium conditions to determine the force of the member s in the section cut, The summation of all forces in x direction will be zero,
Truss:
Truss is referred to a structure or frame that comprises of two force members that are assembled in different configurations such that the forces are evenly distributed and the entire structure acts as a single member ultimately.
The reactions forces induced in the joints of the truss can be calculated by using force equilibrium equations along horizontal and vertical direction, and moment equilibrium equations.
The body's rigidity is the main assumption for using these equilibrium equations.
Before applying these equilibrium equations, it is necessary to distinguish between known and unknown forces acting on the body. When all the supports are removed by replacing them with forces that prevents the translation of body in a given direction, that diagram is called free body diagram.
The concept of method of sections is used to calculate the force in the particular member in a truss. The applications of truss are bridges and cranes.
Force is a vector quantity. It is represented by a magnitude, direction, and point of application.
The force direction can be compressive or tensile.
Various methods are used to determine the forces in members.
• Method of sections
• Method of joints
Method of sections:
The section method is used to calculate forces in any truss member. It employs the principle of equilibrium, which states that if a portion of a truss is in equilibrium, the entire truss is said to be in equilibrium. While considering a section of a truss care should be taken so that not more than three unknown members of truss are a part of section cut.
To determine the force of the members s in the section cut, consider the following equilibrium conditions:
Summation of all forces in x direction is zero,
To learn more about Equilibrium conditions, visit: https://brainly.com/question/25727573
#SPJ4
the competition is heating up. the special judging panel, consisting of karen, old man jenkins andsandy, do not want to release the results of the previous challenge until this one is complete as well. forthis challenge, you have to compute the 1 norm or the maximum absolute column sum norm of a matrix.this norm is defined as the largest column sum in the matrix. that is, if we sum up each column in thematrix individually, it is the largest sum. write a c program to compute the maximum absolutecolumn sum norm.
Written a c program to compute the maximum absolutecolumn sum norm.
#include <iostream> //In c program
#include <cmath>
using namespace std;
const int ROWCAP = 100;
const int COLCAP = 100;
void initialiseMatrix(float matrix[][COLCAP],int rows,int columns);
float findNorm(float matrix[][COLCAP],int rows,int columns);
int main()
{
int rows,columns;
float matrix[ROWCAP][COLCAP];
cout<<"Enter the number of rows: ";
cin>>rows;
cout<<"Enter the number of columns: ";
cin>>columns;
initialiseMatrix(matrix,rows,columns);
float L21 = findNorm(matrix,rows,columns);
cout<<"\nThe L21 norm is "<<L21;
return 0;
}
void initialiseMatrix(float matrix[][COLCAP],int rows,int columns)
{
cout<<"Enter the matrix:\n";
for(int i=0;i<rows;i++)
{
for(int j=0;j<columns;j++)
{
cin>> matrix[i][j];
}
}
cout<<"\nThe matrix entered was:\n";
for(int i=0;i<rows;i++)
{
for(int j=0;j<columns;j++)
{
cout<<(int)matrix[i][j]<<" ";
}
cout<<"\n";
}
}
float findNorm(float matrix[][COLCAP],int rows,int columns)
{
float L21=0;
for(int j=0;j<columns;j++)
{
int squareSum = 0;
for(int i=0;i<rows;i++)
{
squareSum = squareSum + matrix[i][j]*matrix[i][j];
}
L21 = L21 + sqrt(squareSum);
}
return L21;
}
Learn more about program here:
https://brainly.com/question/7344518
#SPJ4
Which of the following are pre-test loops? Select one: a. for, do-while b. while, for c. while, do-while d. while, for, do-while
While, for, are pre-test loops.
What is loop?
A loop is a set of instructions that are repeatedly carried out in computer programming until a specific condition is met. Typically, a certain procedure, like getting and altering a piece of data, is carried out, and then a condition, like whether a counter has reached a specific number, is verified. If not, the subsequent command in the sequence directs the computer to go back to the first and repeat the process. If the condition has indeed been met, the subsequent instruction either branches outside of the loop or "falls through" to the following sequential instruction. A loop is a basic programming concept that is frequently utilised when creating programmes.
To learn more about loop
https://brainly.com/question/29415882
#SPJ4
. for the problem in (1), design a flash converter with 3-bit resolution to represent the 1 khz sinusoid with an amplitude of 5-volt p-p. assume that the sinusoid has 2.5-volt dc level (that is, the signal swings between 0 and 5 volt). use lm339 and priority encoder 74ls148. examine the datasheets for these chips carefully. you may use the design in fig. 1. however, you need to choose the reference level carefully as an incorrect reference level may result in erroneous responses. make sure that you set the reference level in order to accurately represent the signal.
The flash converter should have a resolution of 3 bits in order to accurately represent the 1kHz sinusoid with an amplitude of 5-volt p-p.
What is volt?
The definition of a "volt," a measure of electric potential, commonly known as electromotive force, is "the potential difference between the two points of the a conducting wire carrying a continuous current equal to 1 ampere, when the power consumed between these points was equal to 1 watt." In other words, when a current of just one ampere travels through a resistance of one ohm, a potential of one volt emerges across that resistance. Similar to water pressure, "voltage" (V) represents the potential of energy to travel. Voltage has properties similar to those of water flowing through pipes. It's called the "water-flow analogy" in this case.
The sinusoid should have a 2.5-volt dc level, so the signal should swing between 0 and 5 volts. The flash converter should use an LM339 and a priority encoder 74LS148.
To learn more about volt
https://brainly.com/question/28632127
#SPJ4
error: request for member 'setcursor' in 'oled', which is of non-class type 'adafruit ssd1306(int, int)' oled.setcursor(x, accel line);e
An organic or polymer light-emitting diode dot-matrix graphic display system uses the ssd1306 single-chip cmos oled /pled driver with controller. There are 128 segments and 64 commons in it. This ic is made for oled panels of the Common Cathode kind.
OLED SSD1306: What is it?A single-chip cmos oled/pled driver and controller for organic or polymer light-emitting diode dot-matrix graphic displays is called ssd1306. There are 64 commons and 128 segments in it. The Common Cathode type oled panel is intended for use with this ic.Low-level functions are catered for by the Adafruit ssd1306 library, which is hardware-specific. It needs to be combined with the Adafruit gfx Library in order to show graphical primitives like points, lines, circles, and rectangles.The term "oled" refers for Organic Light-Emitting Diode, an led-based technology in which light is generated by organic molecules.To learn more about Organic Light-Emitting Diode refer to:
https://brainly.com/question/28579691
#SPJ4
if the hydraulic conductivity of a clay specimen compacted wet of optimum is too high to use in a landfill liner (i.e., ks>10-9 m/s), discuss two strategies that could be used to lower the hydraulic conductivity.
1. Apply surcharge load for pre-consolidation. So that voids spaces will decrease and will cause Lower hydraulic conductivity.
2. Pre-fabricated vertical drains may be installed to accelerate the consolidation process. It ultimately densities the soil and reduce hydraulic conductivity.
The ability of a fluid to move through the network of fractures or pores in porous materials, such as soils and rocks, is referred to as hydraulic conductivity, which is symbolically represented as K. The capacity of the fluid to permeate pores and fractured rocks is known as hydraulic conductivity of the material. The type of soils present in the area determine the conductivity. It depends on the soil's texture, density, grain size and distribution, and macrostructure to determine how quickly water flows through the voids in the soil. This property is also referred to as hydraulic conductivity or permeability. Hydrologists require hydraulic conductivity values for modeling, and scientists use it to assess the health of the soil or forecast how water will move through it at various field locations.
learn more about hydraulic conductivity here:
https://brainly.com/question/16227436
#SPJ4
jvc corporations is a multinational company that has a variety of products worldwide. you are working as a network engineer with the network management team of the company. the network administrator has requested you to submit a network document after subdividing the smaller network of human resources into a separate network segment so that it is convenient for troubleshooting. under which of the following groupings will you place this network segment in this scenario?
Departmental boundaries will you place this network segment in this scenario.
What is scenario?
A scene is a synoptical collage of an action or sequence of actions and occurrences in the performing arts. A play's narrative was literally pinned to the rear of the scenery in the commedia dell'arte as an outline for entrances, exits, and action. The material from which the scenery was built is also known as canovaccio or "that which is fastened to the canvas." Scenarios from of the Renaissance that have survived primarily consist of character names, succinct descriptions of events, and references to certain lazzi without any further explanation. Although it is thought that a scenario served as the foundation for a completely improvised performance, it is also possible that they served as simple reminders of the story for those cast members who could read.
To learn more about scenario
https://brainly.com/question/29342162
#SPJ4
steam is leaving a pressure cooker whose operating pressure is 20 psia. it is observed that the amount of liquid in the cooker has decreased by 0.6 gal in 45 minutes after the steady operating conditions are established, and the cross-sectional area of the exit opening is 0.15 in2. determine:
The steady operating conditions are established, and the cross-sectional area of the exit opening is 0.15 inc then the Exit velocity is 34.04 ft/s
The amount of liquid that has
evaporated
m = V/V6
Now V = 0 6 gal
V = 0. 6 * 0 .13 3 68 ft
V = 0 080208 4 3
m =0 . 080208/0.016ft
M= 4. 765 cbm
The mass flowrate of exiting steam liquid becomes
m=m/Δt
& Δt= 45 min
At = 45 x 60 sec
m = 4 . 765/45 x 60
n = 0.00 1 765 ( lbm/s )
Now the exit velocity is
V = m v/A
& A = 0 15 in 2
A=0 .15/( 12 )²ft²
A = 0.001042 ( ft² )
" . V = 0 . 001 7 65 x 20. 093/0.00 1 042
V = 34. 04 ( ft² )
.Exit velocity is 34.04 ( ( ft²/s )
Learn more about velocity here:
https://brainly.com/question/18084516
#SPJ4
Jon's bathtub is rectangular and its base is 14 ft2. How fast is the water level rising if jon is filling the tub at a rate of 0. 8 ft3/min?.
If Jon is filling the tub at a pace of 0. 8 ft3/min, the water level is rising at a rate of 0.05714 ft/min.
If we consider a rectangular bath tub, we can express its volume as follows:
Volume (V) is determined by length, breadth, and height, where the rectangular bathtub's base has dimensions of 14 ft2 in length, breadth, and height (1)
When the rate of rise of the volume is 0.8 ft3/min, differentiation is used to implicitly differentiate 14h with regard to t, resulting in:
dV/dt = 14 dh/dt
dh/dt = (dV/dt)/14
= (0.8 ft3/min)/14 ft2
= 0.05714 ft/min follows.
So, if Jon fills the tub at a rate of 0.8 ft3/min, the rate at which the water level rises is 0.05714 ft/min.
Learn more about Tub here:
https://brainly.com/question/15133133
#SPJ4
A capacitor is connected into a 1250v 1000hz circuit. The current is 80A. What is the capacitance of the capacitor
I have to make same changes in my nextjs project because my enpoint API doesn't support many calls and I would like to make a refresh from the original data every 3 min.
I implemented API from nextjs: I create a pages/api/data and inside I make the call to my endpoint, and in my getInitialProps inside index call to data file.
The get works okey, but I have 2 problems:
1: I have and alert message that says:
API resolved without sending a response for /api/data, this may result in stalled requests.
2: It dosen 't reload data after 3 min..I supouse it is beacuse Cache-Control value...
This is my code:
The API routes provided by Next.js give you a means to build your API. Each file in the pages/api subdirectory is mapped to /api/* and treated more like an API endpoint than a page.
The API routes provided by js provide a way to build your API. Each file in the pages/api subdirectory is mapped to /api/* and treated more like an API endpoint than a page. Because they are server-side only bundles, they don't raise the size of your client-side bundle. An API route won't work until you export a function as default (also known as a request handler). The following arguments are thus accepted by this function:
To build your whole API for new applications, use API Routes.
To know more about API click here:
https://brainly.com/question/27852304
#SPJ4
technician a says that a vehicle will tend to pull toward the side with the most positive camber. technician b says that a progressive-rate spring offers a soft ride but can also carry a heavier load. who is correct?
Both technicians are correct in saying that a car will typically pull to the side with the most positive camber and that a progressive-rate spring provides a smooth ride while also being able to support a heavier load.
Positive Camber: When your wheels are slanted outward, your vehicle's stability is increased. Negative Camber: High performance cars with superior cornering requirements frequently use negative camber because it gives the driver more control. Positive camber will make your automobile pull to either side, which will make it easier to steer and more stable on uneven terrain. Because of this, off-road vehicles frequently employ positive camber. It can also be observed on vintage race vehicles with softer suspension systems. It is applied to steering and suspension design. Positive camber refers to a wheel's top being farther out than its bottom (or tilted away from the axle).
Learn more about Camber here:
https://brainly.com/question/16447343
#SPJ4
which action listed below is the proper method to reduce refrigerant loss from a purge unit on a cfc-11 chiller? group of answer choices pipe purge-unit into recovery unit. leak test and repair the chiller. pipe purge-unit back into the low side. seal the purge-unit discharge.
Check for leaks and fix the chiller. The ideal way to decrease refrigerant loss from a purge unit on a cfc-11 chiller is to take action.
In air conditioning and heat pump systems and chiller, refrigeration leaks are fairly prevalent and can be challenging to find. It requires the appropriate tools and a lot of practise. According to Refrigeration Technologies, the company that created the BigBlu Micro Leak Detector Solution, there are several sorts of leaks. During your maintenance experience, you will come into contact with each one at some point.
Standing Leaks (SL) are leaks that can be found when the system is fully equalised and at rest (off). This must include defrosted freezer evaporative coils. Thankfully, SL leaks are the most frequent of all.
Learn more about Chiller here:
https://brainly.com/question/17438851
#SPJ4
during the in-lab, you will be implementing the alu block. as part of the design process, you need to develop an appropriate set of test vectors to verify basic functionality. write a set of test vectors to verify that all the alu operations work as designed. for each aluop operation you should generate 3 tests with randomly chosen different values for the busa and busb inputs and generate the appropriate output for each set of inputs for that function.
Simple addition, subtraction, multiplication, division, and logic operations like OR and AND are all performed by the ALU
Explain about the ALU operation?Arithmetic logic units are digital circuits that can perform both arithmetic and logic operations (ALU). It refers to the central processing unit (CPU) of a computer's main component (CPU). Modern CPUs have incredibly powerful and complex ALUs. In addition to ALUs, modern CPUs also feature a control unit (CU).
Data and instructions for the programme are kept in the memory. The control unit reads information and commands from memory.
Therefore, utilising three control lines, any one of these eight actions can be found. Think of an ALU with four arithmetic operations: addition, subtraction, multiplication, and division. Remember that the ALU contains four logical operations as well: OR, AND, NOT, and EX- OR.
To learn more about ALU operation refer to:
https://brainly.com/question/10975854
#SPJ1
which of the following is an example of employees behaving according to lean manufacturing techniques? more than one answer may be selected. check all that apply a manager notices a safety violation and stops production.a manager notices a safety violation and stops production. marketing employees are cross-trained on the production processes.marketing employees are cross-trained on the production processes. when an intern notices systematic diminished quality in one product line, he alerts his immediate supervisor.when an intern notices systematic diminished quality in one product line, he alerts his immediate supervisor. employees are encouraged to form strong relationships with employees in their department but are discouraged from socializing with external partners.employees are encouraged to form strong relationships with employees in their department but are discouraged from socializing with external partners.
Answer:
A,C
Explanation:
its correct
Maintaining excess inventory to ensure that products will always be available are giving employees additional authority and responsibility and product-oriented layout.
What is the concept of lean manufacturing?
The concept of lean manufacturing can be referred to or considered as the process of manufacturing the products through adaptation of unique techniques in a largely effective way through generation of a product-oriented layout.
Employees are encouraged to form strong relationships with employees in their department but are discouraged from socializing with external partners.employees are encouraged to form strong relationships with employees in their department but are discouraged from socializing with external partners.
Therefore, Maintaining excess inventory to ensure that products will always be available are giving employees additional authority and responsibility and product-oriented layout.
Learn more about product-oriented layout on:
https://brainly.com/question/15968188
#SPJ2
about the mechanism of the jet plumes on enceladus, which one of the following factors does not contribute to the development of the jet plumes on enceladus?
The thermal observations suggest that the areas with jet plumes are colder than the areas without jet plumes.
A plume is a fluid motion whose primary source of kinetic energy and momentum flux is body forces. Forced plumes or buoyant jets are terms used to describe flows whose motion is changing from a jet to a plume. When a jet's fluid density deviates from the surrounding fluid density, it almost always turns into a plume. Groundwater pollution can result from pollutants that have been discharged into the environment. A plume is the name given to the resulting body of contaminated water within an aquifer, and plume fronts are the names given to its eroding edges. Water droplets may form at the air discharge due to condensation of warm, humid discharge air upon contact with colder ambient air after leaving the equipment.
Learn more about plume here:
https://brainly.com/question/13942024
#SPJ4
a floor can be dented by the application of too much stress. what stress is caused by a 70 kg woman in high-heeled shoes (assume a 6.0- mm -diameter heel) standing on one heel?
The stress caused by a 70 kg woman in heeled shoes (assume a 6.0- mm -diameter heel) standing on one heel is 0.02638699 N/m.
What is stress?Stress is a term used to define the strength of the forces that lead to deformation. The general definition of stress is force per unit area. Tensile stress is what we refer to when forces draw on an object and induce its elongation, similar to how an elastic band stretches.
Given that mass, m = 70 kg
diameter = 6.0 mm = 0.6 cm
then, radius,
r = 0.35 cm
= 0.0035 m
A = areas of cross-section
[tex]\pi r^2 \; and\;\;stress = \dfrac{mg}{a}[/tex]
Putting the values in the formula
[tex]stress = \dfrac{(70) (9.8) }{\pi (0.0035)^2} = 0.02638699 \; N/m^2[/tex]
Therefore, the stress caused by the woman is 0.02638699 N/m2.
To learn more about stress, refer to the link:
https://brainly.com/question/19053575
#SPJ1
Demonstrate the Current Divider formula for the following circuit.
Answer:
Demonstrate the Current Divider formula for the following circuit.
Explanation:
The Current Divider Rule allows us to calculate the current flowing through each parallel resistive branch as a percentage of the total current.
Jupiter's band structure is composed of contrasting regions known as belts and zones. On the diagram, label the belt and zone regions and their corresponding directions of convection.
Jupiter's band structure which is composed of contrasting regions known as belts and zones is given in the attached image.
What are belts?The asteroid belt is a torus-shaped area in the Solar System lying roughly between Jupiter and Mars orbits. It is home to a large number of solid, irregularly shaped things of various sizes, but far smaller than planets, known as asteroids or minor planets.
Zones are lighter bands seen in the atmospheres of gas giants. They are found at higher elevations and are high-pressure areas. In the zones, there is an internal updraft.
It is to be noted that Jupiter, the fifth planet from our Sun, is by far the biggest planet in the solar system, weighing more than twice as much as all the other planets combined. Jupiter's bands and swirls are actually frigid, windy clouds of ammonia and water floating in a hydrogen and helium atmosphere.
Learn more about Jupiter's Band Structure:
https://brainly.com/question/5973837
#SPJ1
the airline clearing house, wholly owned by 35 certificated air carriers, is employed by the airlines to publish and distribute fares and cargo rates to the travel industry.
The Airline Tariff Publishing Company (ATPCO) is an airline clearing house that is used by airlines to publish and distribute fares and cargo rates to the travel industry.
What is airline?
The structure and size of airlines differ. Others lease the aircraft for a set amount of time while hiring workers from other businesses, while some purchase the aircraft to provide special services. Typically, it is scheduled from one location to another. Worldwide, airlines play a significant role in the travel business. In order to make the route flexible and accessible, they frequently use jets and helicopters. People frequently mistakenly believe that the airline industry and aviation are interchangeable, which is not the case. It's important to note that the aviation industry includes all businesses related to aviation, including aircraft manufacturers, providers of non-commercial flights, regulatory bodies, aerospace firms, and others. The airline industry, on the other hand, refers to businesses that offer air transport services to paying customers or even for cargo services.
To learn more about airline
https://brainly.com/question/28749965
#SPJ4
as compared to turnpike transportation, . multiple choice question. canal construction was less expensive canal boats could haul larger loads for less money canals were more easily and cheaply constructed canal transportation was developed earlier
The was a brand-new political party established by "Know-Nothings." Canal boats were able to handle far greater goods when compared to turnpike traffic.
The act of transporting people, animals, and/or objects from one location to another is known as transport in American and British English. Transportation can be accomplished by air, land (by train and by road), water, cable, pipeline, and space. The field is made up of operations, transportation, and infrastructure. Transportation enables human trade, which is vital for the development of civilizations.
Along with terminals like airports, railway stations, bus stops, warehouses, trucking terminals, and refueling depots, fixed installations include roads, railways, airways, rivers, canals, and pipelines (including fueling docks and fuel stations).
To know more about transportation, click here:
https://brainly.com/question/28817407
#SPJ4
Determine the output X, 8-bit Register REG, and the STATE, at the red dotted lines, of the following HLSM (High Level State Machine). The initial state is OFF. Inputs: A (1-bit) Outputs: X (1-bit) Local Storage: REG (8-bit) A' REG>2 OFF ON Di !(REG > 2) A X:='0' REG := '1' X:='1' REG:= REG +1 1 2 CLK_ A At Line 1: Output X = ('O' or '1'). REG (decimal). STATE - ('ON' or 'OFF) At Line 2: Output X- ('O' or '1'). REG - (decimal). STATE ('ON' or 'OFF")
The output X at the first red dot is 0, the 8-bit register REG is 1, and the state is OFF. The output X at the second red dot is 1, the 8-bit register REG is 3, and the state is ON.
What is output?
An output device would be any piece of computer hardware that transforms data into a form that can be understood by humans or, historically, into a form that can be physically read by machines and used with other non-computerized equipment. Text, graphics, sound, touch, or video are all acceptable. The following are some examples: displays, printers, audio equipment, headphones, speakers, projectors, GPS units, optical mark readers, or braille readers. When used to manage industrial equipment, such as a industrial loom with electrical robotics that is not fully computerised, output devices in an industrial setting also include "printers" using paper tape and punched cards.
To learn more about output
https://brainly.com/question/24179864
#SPJ4
Consider the following class definition.
public class FishTank
{
private double numGallons;
private boolean saltWater;
public FishTank(double gals, boolean sw)
{
numGallons = gals;
saltWater = sw;
}
public double getNumGallons()
{
return numGallons;
}
public boolean isSaltWater()
{
if (saltWater)
{
return "Salt Water";
}
else
{
return "Fresh Water";
}
}
}
Which of the following best explains the reason why the class will not compile?
A.The variable numGallons is not declared in the getNumGallons method.
B.The variable saltWater is not declared in the isSaltWater method.
C.The isSaltWater method does not return the value of an instance variable.
D.The value returned by the getNumGallons method is not compatible with the return type of the method.
E.The value returned by the isSaltWater method is not compatible with the return type of the method.
The return type of the method and the value returned by is SaltWater method are incompatible.
What is method?
A process connected to a message and an object is referred to as a method with object-oriented programming (OOP). An object is made up of state information and behaviour, which together make up the interface that outlines how any of the object's numerous consumers may use it. A method is a consumer-parametrized behaviour of an object. Behaviors are represented as methods, while data is represented as an object's properties. For instance, a Window object might contain properties like open and close while also having methods like open and close. In class-based programming, objects are instances of a certain class, and methods are defined within the class. One of the most crucial features that a method offers is method overriding, which allows the same name (for example, area) to be used for numerous distinct types of classes.
To learn more about method
https://brainly.com/question/28273269
#SPJ4
When considering the security aspect of cloud-based enterprise systems, it's important to consider that cloud providers will store _____ copies of your data.
a. altered
b. improved
c. multiple
d. less secur
It's critical to keep in mind that cloud providers will store sensitive data when assessing the security of enterprise systems based on the cloud. altered copies of
What is enterprise systems?
defined as the massive, complicated computing systems that manage enormous amounts of data and allow organisations to coordinate and integrate their business activities. They ensure that information may be shared across all functional levels & management hierarchies and are typically a single system at the heart of organisations. Building Situational Applications in Virtual Enterprises has further information. Enterprise systems are pieces of software that offer services to a unified business structure. Software Implementation for Enterprise Resource Systems has further information. Information solutions that enable businesses to synchronise information across all of their operations. Integrating Enterprise Systems has more information.
To learn more about enterprise systems
https://brainly.com/question/13390630
#SPJ4
barometric pressure is 14.0 psia. what is the maximum flow rate that can be obtained by opening the valve? (a) if cavitation is not a consideration and (b) if cavitation needs to be prevented?
The maximum flow rate that can be obtained by opening the valve:
a) if cavitation is not a consideration, the maximum flow rate is 0.049 ft3/s.
b) if cavitation needs to be prevented, the maximum flow rate is 0.049 ft3/s.
What is flow rate?
The general definition of flow rate shows how fluid of a certain volume moves through a segment in a specified amount of time. Instead of measuring how quickly a fluid moves from point A to point B, the motion of fluids is examined by figuring out its flow rate. Specifically, how much fluid volume moves from point A to point B in a given amount of time. Fluids are the only types of stuff that can 'flow' when it comes to flow rates. Liquids and gases are examples of fluids because they are very fluid and lack set structures. In this explanation of flow rate, solid matter also isn't taken into account because of its fixed shape, which prevents it from flowing or behaving like fluids.
To learn more about flow rate
https://brainly.com/question/23946677
#SPJ4
technician a says that is better to use a 6-point box-end wrench when possible to minimize the risk of stripping the head of the fastener. technician b says that if you are in a tight spot you can flip the wrench since the ends are offset to continue to loosen or tighten a fastener. who is correct?
Both Technician are correct hat is better to use a 6-point box-end wrench when possible to minimize the risk of stripping the head of the fastener,the ends are offset to continue to loosen or tighten a fastener.
When applying torque to turn or prevent the turning of objects—typically rotary fasteners like nuts and bolts—a wrench or spanner is used to provide grip and mechanical advantage. Wrenches come in many different sizes and shapes, and they are used to grip, fasten, turn, tighten, and loosen items like pipes, pipe fittings, nuts, and bolts. Any device you hold in your hands and use to carry out a specific type of task is referred to as a tool. For instance, a hammer, a saw, etc. You place a nut in between your finger and this tiny device, which is placed on the end of your finger. As a result, you can grasp a nut with just your finger tip and reach inside to grab it.
Learn more about wrench here:
https://brainly.com/question/799217
#SPJ4
brainstorm with your team members about what types of output are most appropriate for various executives and high-level managers of dizzyland, a large theme park in florida. include a list of environments or decision-making situations and types of output. in a paragraph, discuss why the group suggested particular options for output.
The group suggested that for executives and high-level managers of Dizzyland, a large theme park in Florida, output types such as reports, presentations, and briefings are most appropriate.
What is executive?
The executive branch of government is in charge of governing a state and enforcing the law. Power is divided across many branches (executive, legislative, and judicial) in political systems founded on the idea of separation of powers in an effort to prevent the consolidation of power in the hands of the a single group of people. In such a system, his executive does not enact or interpret laws (those functions belong to the legislature) (the role of the judiciary). Instead, the executive carries out the law as it has been created by the legislative and adjudicated by the courts. A decree and executive order, for example, may have come from the executive. Regulations are frequently created by executive bureaucracies.
To learn more about executives
https://brainly.com/question/15060039
#SPJ4
technician a says that when disconnecting the battery, the negative terminal should be disconnected first. technician b says that baking soda and water will remove oxidation from battery terminals. who is correct?
Technician A says that when disconnecting the battery, the negative terminal should be disconnected first. Technician B says that baking soda and water will remove oxidation from battery terminals. The technician who is correct is Technician A.
Why should you first disconnect the negative terminal when removing a battery?It is critical to detach the negative side of the battery first; otherwise, an electrical short might occur if the positive is removed first.
The ground cable is the negative () cable; it is always linked to the frame or body metal and can be securely detached first without producing sparks. Similarly, reconnect the positive cable before attaching the negative cable.
Learn more about batteries:
https://brainly.com/question/19225854?
#SPJ1
assumptions when trying to predict stream discharge using flow accumulation values. what are some other important variables that are not included in this model
The correct answer is an essential input for many hydrological and topographic accumulation analyses such as stream channel extraction, stream channel ordering and sub-watershed delineation.
The Flow accumulation tool calculates accumulated flow as the accumulated weight of all cells flowing into each downslope cell in the output raster. If no weight raster is provided, a weight of 1 is applied to each cell, and the value of cells in the output raster is the number of cells that flow into each cell.
To learn more about accumulation click the link below:
brainly.com/question/15907765
#SPJ4
technician a states that a good way to see if an air filter is still serviceable is to hold the filter element up to light and look through it. technician b states that it is usually not necessary to clean the inside of the air filter housing. who is correct?
According to the scenario, the statement made by the Technician A is found to be correct, i.e. a good way to see if an air filter is still serviceable is to hold the filter element up to the light and look through it.
What is the function of an air filter?The function of an air filter is to clean the air that circulates through your heating and cooling system correspondingly. It basically traps and holds too many types of particulates and contaminants that significantly affect your health.
While the statement made by Technician B "t is usually not necessary to clean the inside of the air filter housing" is not as accurate because if you never clean the air filter, the accumulation of dirt and dust particles in your cooling and heating system is sufficiently high which definitely affect your health to a larger extent.
Therefore, the statement made by the Technician A is found to be correct, i.e. a good way to see if an air filter is still serviceable is to hold the filter element up to the light and look through it.
To learn more about Technicians, refer to the link:
https://brainly.com/question/18428188
#SPJ1