Explanation:
Hot air balloons work because hot air rises. By heating the air inside the balloon with the burner, it becomes lighter than the cooler air on the outside. This causes the balloon to float upwards, as if it were in water.
In response to the upward buoyant force, the hot air in the balloon rises.
What is meant by air buoyancy?The upward force that an object experiences from the air it displaces is known as air buoyancy.
Here,
Due to the fact that hot air is less dense than cold air of similar volume, the heated air causes the balloon to rise. Hot air balloons and blimps benefit from buoyancy, which is the air's upward force that keeps them in the air.
The wind determines the balloon's flight path, but the temperature of the air inside the envelope can be changed to alter the balloon's altitude. In order to raise the temperature inside the envelope and increase lift, the pilot may open one or more burner blast valves, causing the aircraft to ascend, slow down, or stop its descent.
If the envelope has a vent, the pilot can also open it to let hot air escape, which will lower the temperature inside the envelope and reduce lift, allowing the aircraft to descend or slow down or cease ascending.
If the pilot doesn't take action, the air inside the envelope will gradually cool through seepage or contact with cooler outside air and give less lift.
Hence,
In response to the upward buoyant force, the hot air in the balloon rises.
To learn more about air buoyancy, click:
https://brainly.com/question/15187724
#SPJ2
Fill in the reaction type and predicted products for:
H2SO3 (aq) + Mg(OH)2 (aq) → ??
Type in the IUPAC name or formula for each product.
Write subscripts as normal numbers.
If there is no second product, type "nothing".
The reaction type is
Question Blank 1 of 3
.
The correct products are:
Question Blank 2 of 3
and
Question Blank 3 of 3
An engine cylinder contains 175 mL of gas at a pressure of 1.0 atm. As the engine runs, it compresses the cylinder, reducing the volume of the gas to 15 mL. What is the new pressure of the gas at this volume?
This problem is providing the initial volume and pressure of a gas in an engine cylinder and asks for the final pressure once the volume of the gas has decreased due to a compression. At the end, the result turns out to be 11.7 atm.
Boyle's lawIn chemistry, gas laws allow us to calculate pressure, volume, temperature or moles depending on a specified change and based on the concept and equation of the ideal gas, which derives the well-known gas laws; Boyle's, Charles', Gay-Lussac's and Avogadro's.
Thus, since this problem provides initial and final volume and initial pressure for us to calculate the final pressure, we understand we need to apply the Boyle's law as a directly proportional relationship between these two:
[tex]P_1V_1=P_2V_2[/tex]
Thus, we solve for the final pressure, P2, to get:
[tex]P_2=\frac{P_1V_1}{V_2}=\frac{1.0atm*175mL}{15mL}\\ \\ P_2=11.7atm[/tex]
Learn more about ideal gases: brainly.com/question/8711877
Identify the following reactions as combination, decomposition, or combustion reactions
C7H8 + 9O2 → 7CO2 + 4H2O ______________
2NaHCO3 → Na2CO3 + H2O + CO2 ___________
CH4 → C + 2H2O ________________
P4O10 + 6H2O → 4H3PO4 ______________
FeSO4 → FeO + SO3 _______________
CaCO3(s) → CO2(g) + CaO(s) _________________
Answer:
1. combustion
2. decomposition
3. decomposition
4. combination
5. decomposition
6. decomposition
Explanation:
combination of a reaction is when 2 more or elements/ compounds combine to form a compound. example: (A+B→AB)
decomposition of a reaction is when a chemical breakdown. example: (AB→A+B)
a combustion reaction is when an element/ compound reacts with oxygen to form the product of water and carbon dioxide.
example: ( [tex]C_{x}[/tex] [tex]H_{y}[/tex] + [tex]O_{2}[/tex] → [tex]H_{2}[/tex]O + [tex]CO_{2}[/tex] )
It is a full moon on Jan 15th. How many days will it be until the next full moon?
Answer:
29.5 days
Explanation:
How often does a full Moon occur? A full Moon happens roughly every 29.5 days. This is the length of time it takes for the Moon to go through one whole lunar phase cycle.
In the reaction A+B - C+D, if element B is in excess, then-
Answer:
Explanation:
Determining the Limiting Reagent
One reactant (A) is chosen, and the balanced chemical equation is used to determine the amount of the other reactant (B) necessary to react with A. If the amount of B actually present exceeds the amount required, then B is in excess, and A is the limiting reagent.
What is the relationship between temperature and kinetic energy?
Answer:
substance is related to the average kinetic energy of the particles of that substance
Explanation:
Answer:
As stated in the kinetic-molecular theory, the temperature of a substance is related to the average kinetic energy of the particles of that substance. When a substance is heated, some of the absorbed energy is stored within the particles, while some of the energy increases the motion of the particles.
Explanation:
hope it will help you have a great day bye and Mark brainlist if the answer is correct
[tex]kai6417[/tex]
#carry on learning
What is the mass in grams of 3.01 X 1023 atoms of the element chlorine, Cl? (Please show step by step)!
Answer: the mass of 3.01 atoms of chlorine is 35.46/2 = 17.73 g.
Explanation: hope its correct
step by step: molar mass: (2 x 35.46) g/mol = 70.92 g/mol
1 mole chlorine = 6.02 x 10^23 molecules of chlorine.
Mass of 6.02 x 10^23 molecules chlorine = 70.92 g
Mass of 3.01 x 10^23 molecules chlorine = 70.92 x(3.01 x 10^23)/(6.02 x 10^23)g
= 35.46 g
Which chemicals are only present at point “x”?
can you please help me out with this
Answer:
Explanation:uum i cant see anything but yeah I think its c
How are water particles affected by the movement of a wave?
•
The wind pushes the water particles down to deeper depths.
O The wave pushes the water particles back and forth.
•
The water particles move in an upward motion through the wave.
The water particles move in a circular pattern.
Answer:
The water particles move in an upward motion through the wave.
Explanation:
When water particles become part of a wave they start to move up or down.
Answer:
u deleted my answer before so
Explanation:
How many iron atoms are in 7.890 g of iron?
Answer:
mole = reactingmass = 7.890= 0.142 mol
molarmass 55.8
atoms = mol × alvagadro constant
0.142 × 6.02 × 10^23
=8.5484 × 10^22 Atoms
Calculate the mass of aluminium oxide which contains double the number of oxygen atoms in 192 g of oxygen gas.
Answer:
648
Explanation:
what you're going to do your first is to convert the 192g to number of atoms
firstly you are going to convert 192 to moles using the formula reacting mass all over molar mass, into it that you're going to get 12 as your answer, you Dey multiply the 12 to avocados constant
in doing that you have I've gotten the number of atoms present in 192 g of oxygen
Fill in the reaction type and predicted products for:
Fe3O4 (s) → ??
Type in the IUPAC name or formula for each product.
Write subscripts as normal numbers.
If there is no second product, type "nothing".
The reaction type is
Question Blank 1 of 3
.
The correct products are:
Question Blank 2 of 3
and
Question Blank 3 of 3
Given that for Fe2O3 (s) the standard enthalpy of formation is −824.2 kJ/mol and the enthalpy of reaction is −851.5 kJ/mol, what is the enthalpy of formation for Al2O3 (s)?
This problem is providing us with the enthalpy of formation of Fe2O3 (s) and the enthalpy of reaction when it reacts with Al to form Al2O3 (s) and Fe. Thus, the enthalpy of formation of Al2O3 (s) is required and found to be -1675.7 kJ/mol as follows.
Enthalpy of reaction.In chemistry, the heat involved in a chemical process can be quantified via the difference in the overall enthalpy of products minus that of reactants:
[tex]\Delta H_r=\Delta H_{products}-\Delta H_{reactants}[/tex]
Now, with the given reaction:
[tex]Fe_2O_3 (s) + 2 Al (s) \rightarrow 2 Fe (s) + Al_2O_3 (s)[/tex]
One can see both Al and Fe have zero as their enthalpies of formation for they are elements. In such a way, one can rearrange the previous formula as:
[tex]\Delta H_r=\Delta H_{Al_2O_3}-\Delta H_{Fe_2O_3}[/tex]
And hence plug in the given energies in order to find the required:
[tex]-851.5kJ/mol=\Delta H_{Al_2O_3}-(-824.2kJ/mol)\\\\\Delta H_{Al_2O_3}=-851.5kJ/mol+(-824.2kJ/mol)\\\\\Delta H_{Al_2O_3}=-1675.7kJ/mol[/tex]
Learn more about enthalpy of reaction: https://brainly.com/question/8055290
An atom has atomic number 5 and mass number 11. How many neutrons does the atom have?
A- 5
B- 6
C- 10
D- 11
Answer:
B
Explanation:
neutrons + atomic number/proton/electron for a neutral atom = mass number
e.g
mass number of Chlorine 35.5
proton number 17
neutron number will be 35.5-17 = 18.5
Therefore.....
your question deduced says
atomic number is 5
mass number is 11
neutron number is however mass number minus atomic number 11-5 =6
ONE MINUTE PLSSSS!!! WILL GIVE BRAINLIEST
Carbon has an atomic number of 6 and an atomic mass of 12. If it is a neutral atom then it has 6 protons, ______ neutrons, and _____ electrons.
13 neutrons and 6 electrons
6 neutrons and 6 electrons
7 neutrons and 7 electrons
12 neutrons and 12 electrons
100 POINTS!!!!!!! <3
Answer:
6 neutrons and 6 electrons
Explanation:
I got it right ;) good luck
If a 100. -g sample of a hydrated compound contains 37.07-g sodium, 48.39-g carbonate and 14.54-g water, find the empirical formula
he required empirical formula based on the data provided is Na2CO3.H2O.
What is empirical formula?The term empirical formula refers to the formula of a compound which shows the ratio of each specie present.
We have the following;
Mass of sodium = 37.07-g
Mass of carbonate = 48.39 g
Mass of water = 14.54-g
Number of moles of sodium = 37.07-g/23 g/mol = 2 moles
Number of moles of carbonate = 48.39 g/61 g/mol = 1 mole
Number of moles of water = 14.54/18 g/mol = 1 mole
The mole ratio is 2 : 1: 1
Hence, the required empirical formula is Na2CO3.H2O
Learn more about empirical formula : https://brainly.com/question/11588623
Carbon substances can have very different properties because...
O A. carbon is almost never found as an element
O B. carbon atoms are very unstable
O c. carbon atoms can be arranged in different ways
O D. carbon atoms are not attracted to each other
Answer:
Calculate the volume (in mL) of the 1.356 M stock NaOH solution needed to prepare 250.0 mL ... Glucose (molar mass=180.16 g/mol) is a simple, soluble sugar ... g of glucose in enough water to make 500.0 mL of solution. • Step 2: Transfer 18.6 mL of the
Explanation:
hi everyone, I am getting stuck in this question can you tell me it please ,what are the property's of a metal and a non-metal
Answer:
Explanation:
Properties of Metal
1. Metals are ductile. ...
2. Metals are a good conductor of heat and electricity.
3. Metals have high tensile strength. .
4. Metals are sonorous.
5. Metals are hard.
Properties of non metal
1. High ionization energies.
2. High electronegativities.
3. Poor thermal conductors.
4. Poor electrical conductors.
5. Brittle solids—not malleable or ductile.
6. Little or no metallic luster.
7. Gain electrons easily.
what is the conversion factor for in^3 to cm^3
scientific notation mean
A radioactive isotope that can be followed through a chemical reaction or industrial process is called a/an what? (needs answer asap!!!!!)
What is the mass of 750 atoms of Nitrogen?
Answer:
53.545803079954496
Explanation:
Brainliest pls
i’m trying to figure out how to convert 6 moles KCL to particles.
Answer:
How many moles KCl in 1 grams? The answer is 0.013413582325
1 mole is equal to 1 moles KCl, or 74.5513 grams.
447.3078 is the answer
Explanation:
~Cornasha_Weeb
How many miles of mgs2o3 are in 199g
Answer:
1.83 moles
Explanation:
1.83 moles
the inner part of the ovary that contains an egg is the ovule
true or false
Answer:
The answer is true
Explanation:
the ovary is a tubular structure and contains ovules
How would I Determine the number of moles in 3.51 x 10^23 formula units of CaCl2
Answer:
by using this formula you will get it
Explanation:
number of mole = number of particles÷ Avogadro's number
n=3.51×10^23÷ 6.02×10^23
n = 0.58 moles
There are 3 reactions of Calcium Carbonate, CaCO₃, that can be formed in this particular problem:
Reaction 1: Calculate the ΔH₁
Reaction 2: ΔH₂ = -635.1 kJ
Reaction 3: ΔH₃ = 178.3 kJ
ΔH₁ = ΔH₂ - ΔH₃
ΔH₁ = -635.1-(178.3) KJ
ΔH₁ = -813.4 KJ
What’s (CH3)2CHCCCH3.
Answer:
4-methly-2-pentyne
Explanation:
1. Consider the following reaction where Kc = 1.29×10-2 at 600 K.
COCl2(g) CO(g) + Cl2(g)
A reaction mixture was found to contain 9.87×10-2 moles of COCl2(g), 2.19×10-2 moles of CO(g), and 3.79×10-2 moles of Cl2(g), in a 1.00 liter container.
Is the reaction at equilibrium?
If not, what direction must it run in order to reach equilibrium?
The reaction quotient, Qc, equals _____
The reaction:
A. must run in the forward direction to reach equilibrium.
B. must run in the reverse direction to reach equilibrium.
C. is at equilibrium.
2. Consider the following reaction where Kc = 55.6 at 698 K.
H2(g) + I2(g) 2HI(g)
A reaction mixture was found to contain 2.59×10-2 moles of H2(g), 4.38×10-2 moles of I2(g) and 0.294 moles of HI(g), in a 1.00 liter container.
Is the reaction at equilibrium?
If not, what direction must it run in order to reach equilibrium?
The reaction quotient, Qc, equals ____
The reaction:
A. must run in the forward direction to reach equilibrium.
B. must run in the reverse direction to reach equilibrium.
C. is at equilibrium.
Answer:
Consider the following reaction where Kc = 1.29×10-2 at 600 K:
COCl2(g) <=> CO(g) + Cl2(g)
A reaction mixture was found to contain 9.85×10-2 moles of COCl2(g), 2.61×10-2moles of CO(g), and 3.71×10-2 moles of Cl2(g), in a 1.00 Liter container.
Indicated true (T) or false (F) for each of the following: