Answer:
all are harmful to the body
The oscillation of the 2.0-kg mass on a spring is described by x = 3.0 cos (4.0 t) where x is in centimeters and t is in seconds. What is the force constant k of the spring?
The force constant k of the spring, if The oscillation of the 2 kg mass of spring is described by x = 3.0 cos (4.0 t) is 32 N / m.
What is force?Force is the influence of either pull or pushes in the body. Basically, gravitation forces, nuclear forces, and friction forces are the types of forces. For e.g. when the wall is hit by a hand then a force is exerted by the hand on the wall as well as the wall also exerts a force on the hand. There are different laws given to Newton to understand force.
Newton is a unit of force used by physicists that is part of the International System (SI). The force required to move a body weighing one kilogram one meter per second is known as a newton.
Given:
The mass of the block, m = 2 kg,
The oscillation of spring, x = 3 cos 4t,
Calculate the omega by comparing the standard equation given below,
[tex]x = A cos \omega t[/tex]
ω = 4
Calculate the spring constant by the formula given below,
[tex]\omega = \sqrt{\frac{k}{m} }[/tex]
4² = k / 2
k = 32 N / m
Therefore, the force constant k of the spring, if The oscillation of the 2 kg mass of spring is described by x = 3.0 cos (4.0 t) is 32 N / m.
To know more about Force:
https://brainly.com/question/13191643
#SPJ2
How do organisms use communication to survive?
Answer: Im not entirly sure but I think It's D all the above. I think all but B because I never really heard of that but if you look in our history I think that happen im not sure I would wait untill you know that somone knows for sure.
Explanation:
NO LINKS
According to "Patterns of Change," select the ways that rocks are changed naturally over time. Choose three answers. O A. water O B. location O C. animals D. wind O E. people O F temperature
Answer: A , D & F
Explanation:
An object of mass m is hanging by a string from the ceiling of an elevator. The elevator is moving down at constant speed. What is the tension of the string?
A. Zero
B. Equal to mg
C. Less than mg
D. Greater than mg
Answer:
D. Greater than mg
Explanation:
According to Newton’s second law of motion, the net force equals mass times acceleration. We are going to use a free body diagram (force diagram) to show that the equation of the motion is given by
T – mg = – ma
Thereby,
T = mg – ma
and the answer is: (d)
D. Greater than mg
_________________________________
(hopet his helps can I pls have brainlist (crown)☺️)
Please help, I keep trying a bunch of things but keep getting them wrong. I don't know where I am going wrong here.
1. Boyle's Law states the volume and pressure of a gas are inversely proportional.
Name the three units of the constant of proportionality between pressure and volume in alphabetical order. (**I have the first two)
2. The ideal gas law can be written as (PV/nT=R). Name the units for R.
The units of the constant of proportionality between pressure and volume in alphabetical order are
1. Celsius (°C)
2. Fahrenheit (°F)
3. Kelvin (K)
The units for R, that is, the ideal gas constant are
1. J K⁻¹ mol⁻¹
2. L atm K⁻¹ mol⁻¹
We will start by completing the Boyle's Law stated
Boyle's Law states the volume and pressure of a gas are inversely proportional, provided that the temperature remains constant.
This means temperature is the constant of proportionality.
Now, we will name the three units of the constant of proportionality, that is, temperature. The units are
1. Degree Celsius (°C)
2. Degree Fahrenheit (°F)
3. Kelvin (K)
2. In the ideal gas equation (PV/nT=R), R represents the ideal gas constant.
The units for R, that is, the ideal gas constant are
1. J K⁻¹ mol⁻¹
2. L atm K⁻¹ mol⁻¹
Hence,
The units of the constant of proportionality between pressure and volume in alphabetical order are
1. Celsius (°C)
2. Fahrenheit (°F)
3. Kelvin (K)
The units for R, that is, the ideal gas constant are
1. J K⁻¹ mol⁻¹
2. L atm K⁻¹ mol⁻¹
Learn more here: https://brainly.com/question/16046515
2. Two equipotential lines are separated by a distance of 2.17 cm. If the potential values of the lines are 5.9 volts and 8.6 volts, what would the strength of the electric field between the lines be
Why is the sky blue and why do we get a sunset
Answer:
Small particles of dust and pollution in the air can contribute to (and sometimes even enhance) these colors, but the primary cause of a blue sky and orange/red sunsets or sunrises is scattering by the gas molecules that make up our atmosphere. Large particles of pollution or dust scatter light in a way that changes much less for different colors.
Explanation:
A 2 kg ball is rolling down a hill at a constant speed of 4 m/s. How much kinetic energy does the ball have?
A man walks 30m to the west, then 5m to the East in 45 seconds. What is the total distance walked?
Answer:
In this problem basically we will use directions to find displacement and distance .
(Keep in mind that displacement is vector while distance is scalar quantity)
And then we will use displacement and distance to find average velocity and average speed.
Explanation:
F=mass x what does this equal?
Answer:
Force = mass × acceleration.
Two blocks are set in a pully system as shown in fig below. Block A sits on the frictionless table while block B hags freely. The pully is light and frictionless towards the light string that runs over it. If the Block A has mass of 3.4 kg and Block has 3.5 kg, what would be the magnitude of the acceleration (in ms-2) of the blocks? [g = 9.8 ms=2]
Answer:
Explanation:
F = ma
a = F/m
a = mBg / (mB + mA)
a = 3.5(9.8)/(3.5 + 3.4)
a = 4.971014...
a = 5.0 m/s²
If you want to use individual Free Body Diagrams
mass A will have downward weight and upward normal forces equal at mAg
and a horizontal force of string tension T
F = ma
T = mAa
mass B will have a downward force of mBg and an upward force of T
mBg - T = mBa
substitute for T
mBg - mAa = mBa
mBg = a(mB + mA)
a = mBg / (mB + mA) which is identical to the above answer.
Several common barometers are built using a variety of fluids. For which fluid will the column of fluid in the barometer be the highest
Answer:
the one in which the fluid has the lowest density
QUESTION 1
In paragraph 1 of this passage, which clues help you figure out the meaning of the word vital?
Changes this energy
O Captured from the Sun
O Chemical change called photosynthesis
O Need them to survive
QUESTION 2
Which is the best summary of the selection?
Answer:
Question 1 is "need them to survive"
Explanation:
vital means necessary or needed
The meaning of the word vital in this passage is "need them to survive". Therefore, option D is correct.
What is the summary of photosynthesis?The process by which plants convert carbon dioxide, water, and sunshine into oxygen and sugar-based energy is known as photosynthesis. Chloroplasts, which house the chlorophyll in plants, are where photosynthesis occurs. The thylakoid membrane, a third inner membrane that creates long folds inside the chloroplast and is bordered by a double membrane, is present inside chloroplasts.
Photosynthesis is very important for the survival of organisms because they get energy from photosynthesis. Life on earth is impossible without this process.
The meaning of the word vital in this passage is "need them to survive". Therefore, option D is correct.
Learn more about photosynthesis, here:
https://brainly.com/question/29764662
#SPJ2
When is the estimated due date (post conception) for parturition?
Answer: 38 weeks (266 days) from the date of conception.
Explanation: www.momjunction.com/pregnancy-due-date-calculator/
Conservation of Energy Roller Coaster A roller coaster cart of mass 100kg travels on a track with one loop. Fill in blanks A-H. А. KE=OJ PE=120000J h= А. V= B B KE=___CE PE=60000J h= _D V= E KE=__F PE=40000J h=__G_ V= KE= PE= h=Om v= K D E F G H K
(a) The height of the roller coaster at 120,000 potential energy is 122.45 m.
(b) The velocity of the roller coaster at 0 J kinetic energy is 0.
(c) The height of the roller coaster at 60,000 potential energy is 61.23 m.
(d) The velocity of the roller coaster at 60,000 J kinetic energy is 34.64 m/s.
(e) The height of the roller coaster at 40,000 potential energy is 40.82 m.
(f) The velocity of the roller coaster at 80,000 J kinetic energy is 40 m/s.
The given parameters:
mass of the roller coaster, m = 100 kgWhen the kinetic energy = 0 and potential energy = 120,000 J
The height of the roller coaster is calculated as follows;
P.E = mgh
[tex]h = \frac{P.E}{mg}\\\\h = \frac{120,000}{100 \times 9.8} \\\\h = 122.45 \ m[/tex]
Since the kinetic energy = 0, the velocity of the roller coaster = 0
When the potential energy, P.E = 60,000 J, the kinetic energy, K.E is calculated as;
P.E + K.E = M.A
P.E + K.E = 120,000
60,000 + K.E = 120,000
K.E = 120,000 - 60,000
K.E = 60,000 J
The height of the roller coaster at 60,000 potential energy is calculated as follows;
[tex]h = \frac{P.E}{mg} \\\\h = \frac{60,000}{100 \times 9.8} \\\\h =61.23 \ m[/tex]
The velocity of the roller coaster at 60,000 J kinetic energy is calculated as follows;
[tex]K.E = \frac{1}{2} mv^2\\\\v^2 = \frac{2K.E}{m} \\\\v = \sqrt{ \frac{2K.E}{m}} \\\\v = \sqrt{ \frac{2\times 60,000}{100}}\\\\v = 34.64 \ m/s[/tex]
When the potential energy, P.E = 40,000 J, the kinetic energy, K.E is calculated as;
P.E + K.E = M.A
40,000 + K.E = 120,000
K.E = 120,000 - 40,000
K.E = 80,000
The height of the roller coaster at 40,000 potential energy is calculated as follows;
[tex]h = \frac{P.E}{mg} \\\\h = \frac{40,000}{100 \times 9.8} \\\\h = 40.82 \ m[/tex]
The velocity of the roller coaster at 80,000 J kinetic energy is calculated as follows;
[tex]v = \sqrt{\frac{2K.E}{m} } \\\\v = \sqrt{\frac{2\times 80,000}{100} } \\\\v = 40 \ m/s[/tex]
Learn more here:https://brainly.com/question/19969393
Which performs a function that is most like the function of a retina?
Answer:
The answer is ciliary body and focus the pupil. In addition, the ciliary body is a portion of the eye that contains the ciliary muscle that reins the shape of the lens and the ciliary epithelium that yields the aqueous humor. The ciliary body is a share of the uvea which is the layer of tissue that transports oxygen and nutrients to the eye nerves while the pupil is a hole positioned in the midpoint of the iris of the eye that permits light to foray the retina. It looks black since light rays incoming the pupil are moreover engrossed by the tissues in the eye openly or engrossed after diffuse reflections in the eye that typically miss leaving the fine pupil
Explanation:
Answer:the eye has many parts that must work together in order to produce clear vision
Explanation: correct on my test
How do humans obtain the carbon and energy they use in their bodies?
A. by breathing in carbon dioxide from the atmosphere
B. by consuming plants or other animals
C. by absorbing energy from sunlight
D. by absorbing carbon found in the soil
Answer:
B. . by consuming plants or other animals
For the ballistic missile aimed to achieve the maximum range of 9500 km, what is the maximum altitude reached in the trajectory
Explanation:
The range R of a projectile is given the equation
[tex]R = \dfrac{v_0^2}{g}\sin{2\theta}[/tex]
The maximum range is achieved when [tex]\theta = 45°[/tex] so our equation reduces to
[tex]R_{max} = \dfrac{v_0^2}{g}[/tex]
We can solve for the initial velocity [tex]v_0[/tex] as follows:
[tex]v_0^2 = gR_{max} \Rightarrow v_0 = \sqrt{gR_{max}}[/tex]
or
[tex]v_0 = \sqrt{(9.8\:\text{m/s}^2)(9.5×10^6\:\text{m})}[/tex]
[tex]\:\:\:\:\:\:\:=9.6×10^3\:\text{m/s}[/tex]
To find the maximum altitude H reached by the missile, we can use the equation
[tex]v_y^2 = v_{0y}^2 - 2gy = (v_0\sin{45°})^2 - 2gy[/tex]
At its maximum height H, [tex]v_y = 0[/tex] so we can write
[tex]0 = (v_0\sin{45°})^2 - 2gH[/tex]
or
[tex]H = \dfrac{(v_0\sin{45°})^2}{2g}[/tex]
[tex]\:\:\:\:\:\:= \dfrac{[(9.6×10^3\:\text{m/s})\sin{45°}]^2}{2(9.8\:\text{m/s}^2)}[/tex]
[tex]\:\:\:\:\:\:= 2.4×10^6\:\text{m}[/tex]
how do all organisms begin life
Answer:
All organisms begin their lives as single cells.Overtime,these organisms grow and take on the characteristics of their species...All organisms grow,and different parts of organisms may grow at different rates.Organisims made out of only one cell
may change little during their lives, but they do grow
Explanation:
brainlest me please
An object is dropped from a vertical height of 1.89 m above the balcony level. What is the object’s speed when it is 2.20 m below the balcony level if 10.0% energy is lost due to the air resistance? Does it matter when to apply 10% loss before V calculations or after? [8.49m/s] [yes it does, 0.9Energy result in √0.9Velocity]
a.
The object's speed at 2.20 m below balcony level is 8.74 m/s
Let the balcony level be 0 m and the height above the balcony level be positive and height below the balcony level negative.
Using the principle of conservation of energy, the total energy at a vertical height of 1.89 m above the balcony level equals the total mechanical energy when the object is 2.20 m below the balcony level and
So, E = E'
U + K + f = U' + K' + f'
where U = initial potential energy at 1.89 m = mgh, K = initial kinetic energy at 1.89 m = 0 J(since it is released from rest), f = energy loss at 1.89 m = 0 J, U' = final potential energy at 2.20 m below balcony level = mgh', K = final kinetic energy at 2.20 m = 1/2mv², f' = energy loss at 1.89 m = 10%U = 0.10mgh(since 10% of the initial energy is lost).
So,
U + K + f = U' + K' + f'
mgh + 0 + 0 = mgh' + 1/2mv² + 0.10mgh
mgh = mgh' + 1/2mv² + 0.10mgh
Dividing through by m, we have
gh = gh' + 1/2v² + 0.10gh
So, gh - 0.10gh = gh' + 1/2v²
0.90gh = gh' + 1/2v²
1/2v² = 0.90gh - gh'
1/2v² = g(0.90h - h')
v² = 2g(0.90h - h')
Taking square-root of both sides, we have
v = √[2g(0.90h - h')]
where v = velocity of object at 2.20 m below balcony level, h = height above the balcony level = 1.89 m, h' = height below the balcony level = -2.20 m and g = acceleration due to gravity = 9.8 m/s²
Substituting the values of the variables into the equation, we have
v = √[2g(0.90h - h')]
v = √[2 × 9.8 m/s²{0.90 × 1.89 m - (-2.20 m)}]
v = √[2 × 9.8 m/s²(1.701 m + 2.20 m)]
v = √[2 × 9.8 m/s²(3.901 m)]
v = √[76.4596 m²/s²]
v = 8.74 m/s
So, the object's speed at 2.20 m below balcony level is 8.74 m/s
b.
Yes it does matter when we apply 10% loss before V calculations
We need to apply the 10 % loss before V calculations because this would give us a proper value for V since the energy is lost before V is obtained.
So, yes it does matter when we apply 10% loss before V calculations
Learn more about speed of a falling object here:
https://brainly.com/question/18732868
Which statement describes electromagnetic waves with wavelengths grater than 700 nanometers
Answer:
They take the form of heat, I think thats it but I cant see if you put down any answers
Explanation:
Answer:a
Explanation:
they form hear
Objects 1 and 2 attract each other with a gravitational force of 45 units. If the mass of Object 1 is doubled, then the new gravitational fore will be ______ units.
Explanation:
Fgravity = G*(mass1*mass2)/D²
so, if you double one of the masses, what does that do to our equation ?
Fgravitynew = G*(2*mass1*mass2)/D²
due to the commutative property of multiplication
Fgravitynew = 2* G*(mass1*mass2)/D² = 2* Fgravity
so, the correct answer will be 2×45 = 90 units.
A stomp rocket takes 3.1 seconds to reach its maximum height.
- What is its initial velocity? (Do not use units. If the answer is negative, please put a
negative sign in front of the answer.)
- What is its maximum height? (Do not use units. If the answer is negative, please put a
negative sign in front of the answer.)
Answer:
Explanation:
Ignoring air resistance the time to rise will equal the time to fall and initial velocity will be the same magnitude as final velocity just before impact.
v = at
v = 9.8(3.1)
v = 30.38
v = 30 m/s
max height can be found knowing the velocity is zero at the top of its flight.
v² = u² + 2as
s = (v² - u²) / 2a
s = (0.00² - 30.38²) / (2(-9.8))
s = 47.089
s = 47 m
A stomp rocket takes 3.1 seconds to reach its maximum height then the initial velocity is given as v = 30 m/s and maximum height is 47.089 m.
What is Velocity?Velocity is defined as rate of change of position with respect to time.
SI unit of velocity is m/sec. Velocity is a vector quantity.
Given that in the question time taken by rocket to reach maximum height is 3.1 sec. Ignoring air resistance the time to rise will equal the time to fall and initial velocity will be the same magnitude as final velocity just before impact.
v = at
v = 9.8(3.1)
v = 30.38
v = 30 m/s
Max height can be found knowing the velocity is zero at the top of its flight.
v² = u² + 2as
s = (v² - u²) / 2a
s = (0.00² - 30.38²) / (2(-9.8))
s = 47.089
s = 47 m
So, the initial velocity is given as v = 30 m/s and maximum height is 47.089 m.
To learn more about Velocity refer to the link:
brainly.com/question/18084516
#SPJ5
73 ml of water is followed by 25 ml of juice. What is the percent strength of juice?
Total liquid: 73 + 25 = 98 ml
Percent juice = (25/98) x 100 = 25.5 %
What conclusion can you draw from the information shown in this figure?
The speed of sound varies with the material in which the waves travel.
Sound waves can move more quickly through liquids than through solids.
Sound intensity is greater in water than in air.
The frequency of sound increases with wave speed.
Answer:
The speed of sound varies with the material in which the waves travel.
Explanation:
knowledge and research
It can be concluded as per the given table that the speed of sound varies with the material in which the waves travel. The correct option is A.
What is speed?Speed is the pace at which an object's position changes in any direction. The distance travelled in relation to the time it took to travel that distance is how speed is defined. Since speed simply has a direction and no magnitude, it is a scalar quantity.
It has a dimension of time-distance. As a result, the fundamental unit of time and the basic unit of distance are combined to form the SI unit of speed. Thus, the metre per second (m/s) is the SI unit of speed.
According to the given table, it can be inferred that the material in which the waves travel affects the speed of sound.
Thus, the correct option is A.
For more details regarding speed, visit:
https://brainly.com/question/28224010
#SPJ2
the c component of vector a is 5.3 units, and it’s y component is -2.3 units. the angle that vector a makes with the +x axis is closest to
110
160
23
340
250
Answer:
340
Explanation:
Sorry I don't know how to do this one yet, I just found the answer in a textbook.
The angle that vector a makes with the +x axis is closest to 23.
What is direction of a vector?The direction of a vector is represented tangent of angle equal to the ratio of the y component and the x component of the vector quantity.
tangent of angle = y/x
angle = tan⁻¹ (-2.3/5.3)
angle = 23.46°
Thus, the angle that vector makes with +x is 23.
Learn more about direction of vector.
https://brainly.com/question/12002625
#SPJ2
A skater is spinning with his arms outstretched. He has a 2 lb weight in each hand. In an attempt to change his angular velocity he lets go of both weights (by just opening his grip). Does he succeed in changing his angular velocity
Answer:
No
Explanation:
Changing momentum of any kind requires work. Work is a force acting over a distance. While holding the weights at arms length and spinning will create a force (centripetal), there is no radial distance change incurred. Releasing the weights will reduce the force to zero, still no work done and no change in angular momentum.
If he was holding the weights at arms length while spinning and he pull his hands to his chest, there now exists both the centripetal force and a distance in the direction of that force (inward radial) this work will result in an increase in angular velocity as moment of inertia has decreased with the work done.
No, the skater doesn't succeed in changing his angular velocity.
Conservation of angular momentumThe final angular velocity of the skater is determined by applying the principle of conservation of angular momentum as shown below;
Li = Lf
[tex]Ii\omega _i = I_f \omega _f[/tex]
where;
Ii is the initial moment of inertia of the skaterIf is the final moment of inertia of the skaterωi is the initial angular speed of the skaterωf is the final angular speed of the skaterWhen the skater holds the weight, the momnet of inertia of both arms is the same. Also when the skater drops the weight, the moment of inertia of both arms is still the same. Thus, at any instant, the moment of inertia of the two arms is the same.
To change the angular speed, the initial and final moment of inertia of the two arms must be different. Thus, the skater doesn't succeed in changing his angular velocity.
Learn more about angular momentum here: https://brainly.com/question/7538238
Find the first three harmonics of a string of linear mass density 2.00 g/m and length 0.600 m when it is subjected to tension of 50.0 N.
Hi there!
We can use the following equation to find the frequency of each harmonic:
[tex]f_n = \frac{n}{2L} \sqrt{\frac{T}{\lambda}}[/tex]
n = nth harmonic
L = length of string (m)
T = Tension of string (N)
λ = linear density (kg/m)
Begin by converting the linear mass density to kg:
2.00g /m · 1 kg / 1000g = 0.002 kg/m
Now, we can use the equation to find the first three harmonics.
First harmonic:
[tex]f_1 = \frac{1}{2(0.6)} \sqrt{\frac{50}{0.002}} = \boxed{131.76 Hz}[/tex]
Second harmonic:
[tex]f_2 = \frac{2}{2(0.6)} \sqrt{\frac{50}{0.002}} = \boxed{263.52Hz}[/tex]
Third harmonic:
[tex]f_3 = \frac{3}{2(0.6)} \sqrt{\frac{50}{0.002}} = \boxed{395.28Hz}[/tex]
When 587.9 nm passes through a single slit 0.73 mm wide, it creates a diffraction pattern. (a) What distance away is the wall if the first minimum is 0.86 mm from the central maximum
From Young's single slit experiment, the distance away from the wall will be 1.068 m
Given that 587.9 nm of wavelength of light passes through a single slit 0.73 mm wide, it creates a diffraction pattern.
From the question, the following parameters are given:
The wavelength of the light λ = 587.9 nm
The width of the slit a = 0.73 mm
Fringe width X = 0.86 mm
The distance away from the wall D = ?
The fringe width is related to the wavelength of the light source by the equation:
X = Dλ ÷ a
Substitute all the parameters into the formula
0.83 × [tex]10^{-3}[/tex] = 587.9 × [tex]10^{-9}[/tex] D ÷ 0.73 ×
Cross multiply
587.9 × [tex]10^{-9}[/tex] D = 6.278 × [tex]10^{-7}[/tex]
make D the subject of the formula
D = 6.278 × [tex]10^{-7}[/tex] ÷ 587.9 × [tex]10^{-9}[/tex]
D = 1.068 m
Therefore, the distance away from the wall is 1.068 m
Learn more here: https://brainly.com/question/23801391
If the first minimum is [tex]0.86 mm[/tex] from the central maximum, the distance away is 1.07 meters.
Given the data in the question;
Wavelength; [tex]\lambda = 587.9nm = 5.879*10^{-7}m[/tex]Width of slit; [tex]a = 0.73mm = 0.00073m[/tex] First minimum; [tex]y = 0.86mm = 0.00086m[/tex]Since its first, order number; [tex]m = 1[/tex]Distance; [tex]L = \ ?[/tex]From Thomas Young's single slit experiment:
[tex]\frac{a*y}{L} = m * \lambda[/tex]
Where a is the width of the slit, y is first minimum, L is the distance, m is the order number and λ is the wavelength.
We substitute our values into the equation
[tex]\frac{0.00073m\ *\ 0.00086m}{L} = 1\ *\ ( 5.879*10^{-7}m)\\\\\frac{0.0000006278m^2}{L} = 5.879*10^{-7}m\\\\L = \frac{0.0000006278m^2}{5.879*10^{-7}m} \\\\L = 1.07m[/tex]
Therefore, if the first minimum is [tex]0.86 mm[/tex] from the central maximum, the distance away is 1.07 meters.
Learn more: https://brainly.com/question/16051099
Look at the simple machine shown below to determine the mechanical advantage
Answer:
A
Explanation: