What does 14 mean in c14?

The appropriate explanation for the non-metal is that the higher effective nuclear charge less will be the atomic radius.

Atomic radius typically decreases during a period from left to right. There are a few little outliers, such how the oxygen radius is a tiny bit bigger than the nitrogen radius. Protons are gradually added to the nucleus at the same time that electrons are gradually added to the main energy level. The enhanced positive charge of the nucleus gradually attracts these electrons closer to it. The size of the atoms shrinks as the strength of attraction between nuclei and electrons grows. Due to electron-electron repulsions that would otherwise result in the atom's size expanding, the effect becomes less pronounced as one proceeds further to the right in a period.

Learn more about nuclear charge

brainly.com/question/13664060

#SPJ4

The pressure difference required to stop solvent from flowing through a semipermeable membrane is known as the osmotic pressure of a solution.

The molar concentration of the solute particles in solution directly relates to the osmotic pressure of a solution. Because a solution has a higher concentration of a solute than pure water does, water from pure water wants to diffuse or go by osmosis to the solution. Therefore, the osmotic pressure of a solution is always greater than that of pure water or solvent because it is necessary to prevent water from entering the solution. A semipermeable membrane can no longer pass water through it due to osmotic pressure. The osmotic pressure formula can be used to determine this pressure, which in turn inhibits osmosis from taking place.

Learn more about concentration here-

https://brainly.com/question/10725862

#SPJ4

The kind of molecular motion that mostly relates to temperature of a substance is : A) translational motion.

Motion in which all the points of a moving body moves uniformly in the same direction. If object is undergoing translatory motion, we can see that there is no change in the orientation of object. Translatory motion is also called translational motion.

In kinetic theory of gasses, increasing the temperature of a gas increases the average kinetic energy of the molecules, causing an increased motion. This increased motion increases outward pressure of the gas, which an expected result from the ideal gas equation (PV=NkT).

To know more about translational motion, refer

https://brainly.com/question/1995481

#SPJ4

the particular gas effusion was 21.0. and the methane effusion rate is 47.0 The molar mass of the unknown gas is approximately 28.6 g/mol

The process through which a gas manages to escape through with a small hole or highly permeable barrier is known as effusion. A gas's rate of effusion is inversely proportional to its molar mass squared. The following equation describes this relationship: rate1 / rate2 = (sqrt(molar mass2) / sqrt(molar mass1)). where rate1 and rate2 are the rates of effusion of the two gases and molar mass1 and molar mass2 are the molar masses of the two gases.Given the rate of effusion of the unknown gas is 21.0 mL/min, and the rate of effusion of pure methane (CH4) is 47.0 mL/min, we can use the above equation to find the molar mass of the unknown gas:

(21.0 mL/min) / (47.0 mL/min) = sqrt(molar mass unknown) / sqrt(16.04 g/mol)

Squaring both sides of the equation, we get:

(21.0 mL/min)^2 / (47.0 mL/min)^2 = (molar mass unknown) / (16.04 g/mol)

Solving for molar mass unknown we get:

molar mass unknown = (16.04 g/mol) * (21.0 mL/min)^2 / (47.0 mL/min)^2

The molar mass of the unknown gas is approximately 28.6 g/mol

Please note that the above calculation is based on the assumption that the temperature and pressure are the same for both gases and that the gases are ideal

Lear more about effusion here:

https://brainly.com/question/2655041

#SPJ4

The final enthalpy of the overall chemical equation is -475.9KJ. and 2nd step must occur to calculate the final enthalpy.

Enthalpy depends only on the system's composition, temperature, and pressure; it is unaffected by the system's history. It is a quality or state function that resembles energy and has energy-like properties (and is thus measured in units of joules or ergs).

1st equation

C(s) + O₂ → CO₂ ΔH₁ = - 393.5KJ

2nd equation

CO + O₂ → 2CO₂ ΔH₂ = -566.0KJ

3rd equation

2H₂O → 2H₂ + O₂ ΔH₃ = 483.6KJ

Overall chemical equation is

C(s) + H₂ + O→ CO(g) + H₂(g)

The overall chemical equation's final enthalpy is

ΔH = ΔH₁ + ΔH₂ + ΔH₃

ΔH =  - 393.5 -566.0 + 483.6

ΔH = -959.5 + 475.9

ΔH = -475.9KJ.

To know more about enthalpy visit:

https://brainly.com/question/13996238

#SPJ4

The life cycle of a star the size of our sun starts with a nebula, a huge cloud of dust and gas. The gravity of the nebula compresses the cloud until the atoms fuse together, creating a star. This stage is known as pre-birth.

Next, the star enters a main sequence phase, where it shines brightly for millions of years, powered by nuclear fusion.

Eventually the star will slowly run out of hydrogen and the fusion process will become less and less efficient. The star will expand and become what is known as a red giant. This marks the end of the main sequence phase.

After this point, the star expels its outer layers, leaving behind a small, hot core called a white dwarf. It will continue to cool down until it becomes a black dwarf.

If the star is at least 5 times bigger than our sun, it will enter a different life cycle. After the red giant phase, the star will undergo a supernova explosion, which will spew dust and gas into the surrounding areas. These remainders will later form new stars, planets, and other cosmic bodies. What's left of the star will become a neutron star or a black hole.

Answer:

a process where the products released in one reaction are the stimuli and reactants for another reaction

Explanation:

A chemical reaction is described as a process in which the products promote or spread the reaction, which may accelerate dramatically under certain conditions.

Answer: chain reaction

Explanation: a chain reaction is a series of chemical reactions where the products of the reaction contribute to the reactants of another reaction. as a series of events that are each caused by the previous event. If a trash can falls over and this scares a cat who then jumps and knocks over a glass of water, thats a chain reaction. The trash can fall is the initial event, and the end result is the glass getting knocked over.

Answer:46 moles of carbon dioxide and 12 moles of ethane.

Explanation:

46 moles of carbon dioxide and 12 moles of ethane.

A non-flammable, colorless gas, carbon dioxide is. While being far less common in the atmosphere than nitrogen and oxygen, carbon dioxide plays a crucial influence in determining the composition of the air on our planet.

Carbon dioxide, a colourless gas having a faint sharp odour and a sour taste. It is one of the most important greenhouse gases linked to global warming, but it is a minor component of Earth’s atmosphere .

It is formed in combustion of carbon-containing materials, in fermentation, and in respiration of animals and employed by plants in the photosynthesis of carbohydrates.

Therefore, 46 moles of carbon dioxide and 12 moles of ethane.

To learn more about carbon dioxide, refer to the link:

https://brainly.com/question/3049557

#SPJ1

The isostasy is relates to  the buoyancy , the deepest oceans depths relates to the trench, the theory of the crustal structure relates to the plate tectonics.

The match  the following for the given options are given below as follows :

1 ) isostasy                               buoyancy

2) deepest ocean depths        trench

3) drowned glaciated valley     fjord

4) theory of crustal structure   tectonic plates

5)  oceanic plate going down   subduction

The above are the correct order for the given following relations. these given options are related to the earth movement. like isostasy is the rising or the settling of the part of the earth's lithosphere.

To learn more about tectonic plates here

https://brainly.com/question/998575

#SPJ4

In the given bend on the topographic map, 1. is Downstream and 2. is Upstream.

The stream can be described as the moving water in a river is called a stream. Upstream can be described as if the water is flowing in the opposite direction to the stream, it is known as upstream.

Downstream can be described as flowing along the direction of the stream, it is known as downstream.

Still water can be described as under this circumstance the water is stationary and the speed of the water is equal to zero.

All rivers flow downhill from higher elevations to lower elevations and perpendicular to the contour line. As a rule of thumb, the V-shaped contour is representing upstream.

Learn more about Upstream and Downstream, here:

https://brainly.com/question/11194433

#SPJ1

When the arrangement of atoms changes in a substance, the properties of the substance can change as well. The different arrangements of atoms can lead to different chemical and physical properties.

For example, if the atoms of a substance are rearranged to form a new compound, the new compound will have different chemical properties than the original substance. A new compound may have a different color, odor, reactivity, or melting point than the original substance.

Changing the arrangement of atoms without changing the chemical composition can change the physical properties. For example, a crystalline solid has atoms or molecules arranged in a regular, repeating pattern. This arrangement gives the material unique properties such as density, melting point, and hardness. If the arrangement of atoms and molecules changes, the properties of solids can also change.

In summary, when the arrangement of atoms in a substance changes, the properties of the substance can also change. Different arrangements of atoms have different chemical and physical properties.

Learn more about the arrangement of atoms here:https://brainly.com/question/2607944

#SPJ4

The precipitate is collected, filtered, dried, and weighed.. The mass of the precipitate is 0.116 g.

Dissolved refers to a solute that is completely dissolved in a solvent, resulting in a homogeneous mixture. When a solute, such as a salt, is dissolved in a solvent, such as water, the molecules of each component are dispersed evenly throughout the mixture. This process can be reversed by evaporating the solvent, leaving the solute behind. The amount of solute that can be dissolved in a particular solvent is known as its solubility.

Mass of Al2(SO4)3= Mass of sample- Mass of precipitate
Mass of Al2(SO4)3= 1.68-0.116=1.564 g
Percent of Al2(SO4)3= (1.564/1.68)*100= 93.45 %

To learn more about Dissolved
https://brainly.com/question/2078413
#SPJ4

The reactivity of an element depends upon the number of valence electrons, i.e., the electrons present in the outermost shell.

The number of electrons withinside the outermost shell of an atom determines its reactivity. Noble gases have low reactivity due to the fact they've complete electron shells. Halogens are extraordinarily reactive due to the fact they with ease advantage an electron to fill their outermost shell. Non-reactive metal atoms have whole outer shells and therefore do now no longer generally tend to lose, advantage, or percentage electrons. So, all factors having a crammed outermost shell are non-reactive. They also are referred to as noble gases. An element's reactivity is decided via way of means of the number of protons determined in an atom of the element.

To learn more about halogen check the link below:

https://brainly.com/question/1450671

#SPJ4

The empirical formula for the given compound is C6H6.

The molecular formula represents the precise digits of the atoms found in the given molecule of the compound, whereas the empirical formula represents the proportional of the atoms found in the provided compound.

The empirical formula defines the individual atoms that make up a species in the simplest whole number ratio possible. The

The empirical formula is always multiplied by the molecular formula.

Given the foregoing, the empirical formula for the molecular formula is n.

Because of this, the molecular formula is: 78.0 g m o l 1 = n ( 12.011 + 1.00794 ) g m o l 1

n \s= \s78 \s12.011 \s+ \s1.00794 =6 \s .

And the chemical formula is C 6 H 6.

Molecular formula, although not always.≡

empirical formula, which includes the multiple n=1 \s .

Learn more about  empirical formula here: https://brainly.com/question/12973146

#SPJ1

Explanation:

use to describe something that is complete opposite

Answer: C(Elevation of surface features)

Explanation: It's a topographical Map which displays lines of Equal Elevation.

The molar conductivity of KCl at this concentration and  transport numbers and molar ionic conductivity of K+ and Cl– are

Generally, The transport number, t, of an ion can be calculated using the equation: t = (μi x Ci) / Λm,

where

Given that the electric mobility of

K+ is 5.9 x 10^-4 cm^2 V^-1 s^-1, the electric mobility of Cl- is 6.14 x 10^-4 cm^2 V^-1 s^-1, and the concentration of KCl is 0.30 mol L^-1, we can calculate the transport numbers as:

t(K+) = (5.9 x 10^-4 cm^2 V^-1 s^-1 x [K+]) / Λm t(Cl-)

= (6.14 x 10^-4 cm^2 V^-1 s^-1 x [Cl-]) / Λm

where

[K+] and [Cl-] are the molar concentrations of K+ and Cl- ions, respectively.

The molar ionic conductivity, Λi, of an ion can be calculated using the equation: Λi = μi x Ci,

where

Given that the electric mobility of K+ is 5.9 x 10^-4 cm^2 V^-1 s^-1 and the concentration of K+ is 0.15 mol L^-1, the molar ionic conductivity of K+ is:

Λ(K+) = 5.9 x 10^-4 cm^2 V^-1 s^-1 x 0.15 mol L^-1

Λ(K+) =8.85×10−5

Similarly, given that the electric mobility of

Cl- is 6.14 x 10^-4 cm^2 V^-1 s^-1 and the concentration of Cl- is 0.15 mol L^-1, the molar ionic conductivity of Cl- is:

Λ(Cl-) = 6.14 x 10^-4 cm^2 V^-1 s^-1 x 0.15 mol L^-1

Λ(Cl-) =9.21×10^−5

Finally, the molar conductivity of KCl can be calculated as:

Λm = Λ(K+) + Λ(Cl-)

=9.21×10^−5+8.85×10^−5

Λm =1.806×10−4

The transport numbers of K+ and Cl- can be calculated by

t(K+) = Λ(K+) / Λm and

t(Cl-) = Λ(Cl-) / Λm respectively.

t(K+) = 8.85×10−5/1.806×10−4 '

t(K+)=4.90033223×10^−9

and

t(Cl-) =9.21×10^−5/1.806×10−4

t(Cl-) =5.09966777×10^−9

Read more about molar conductivity

https://brainly.com/question/26097545

#SPJ1

In an electrolytic cell, an oxidation-reduction reaction occurs. This type of reaction involves the transfer of electrons from one species to another.

The voltage of an electrolytic cell is typically greater than the voltage of a galvanic cell and is determined by the reactants and the reaction conditions.

In an electrolytic cell, a chemical reaction is driven by an external electrical current. This current causes electrons to flow between two electrodes, typically a cathode and an anode. At the cathode, electrons are gained, leading to a reduction reaction, while at the anode, electrons are lost, leading to an oxidation reaction.

The voltage of an electrolytic cell is typically greater than the voltage of a galvanic cell, and is determined by the reactants and the reaction conditions. The voltage must be high enough to provide the energy needed to drive the reaction, and can be adjusted by changing the current. The reaction rate of an electrolytic cell can also be controlled by varying the current.

Learn more about electrolytic cell:

https://brainly.com/question/21722989

#SPJ4

The conservation of natural resources be most effective in reducing carbon dioxide in the atmosphere,  is the planting more trees.

The planting the more new tress is the one of the most effective ways to reduce the atmospheric carbon dioxide. this will also limits the global warming. the plants remove the carbon dioxide from the atmosphere through the photosynthesis. plants helps to stop the climate change as they will remove the carbon dioxide from the atmosphere. and  store the carbon in tress and the soil.

Thus , the way to reduce the carbon dioxide from the atmosphere is the planting more and more trees.

To learn more about  carbon dioxide here

https://brainly.com/question/19923519

#SPJ4

Answer:

One problem that people may encounter when using a hot and cold compress pillow is that the pillow may not stay hot or cold for a long enough period of time. This can be frustrating for people who are using the pillow to alleviate muscle pain or reduce inflammation, as they may need to continually reheat or refreeze the pillow in order to maintain its therapeutic benefits. To solve this problem, people may need to find a pillow that is better at retaining heat or cold, or they may need to use additional heating or cooling elements (such as hot water bottles or ice packs) in conjunction with the pillow.

Explanation:

Before we use our imaginations to try and think of a fitting room, let's take a look at what a chloroplast is.

A chloroplast is the organelle in plant-based cells responsible for energy production. Through photosynthesis (you've probably heard of this before!), they use sunlight to create energy for the plant to function.

Since the chloroplast is the energy-maker for the cell, we need to imagine a room in a house that does something like this. There's a couple things that come to my mind. Firstly, although they don't really count as rooms, something like solar panels would probably make the most sense here. Since the answer asks for a room, though, solar panels don't work.

Maybe a kitchen? The kitchen is the room where food is created, supplying energy to all the inhabitants of a house.

I hope this helped! Learning about the components of cells is a little complicated at the start, but it's definitely a very exciting topic that only gets more and more interesting the deeper you delve into it.

- breezy ツ

Travelling from left to right through a period of such a periodic table reduces the size of both atom.

Traveling from left to right inside a period of such periodic table causes the size of the atom to shrink. The number of protons and the positive nuclear energy both rise with such an increasing in the atomic number. The diameter of the atom shrinks as the nucleus draws the outermost electron.

Since they are eager to give up electrons and form cations, the substances on the left column of the periodic table possess low ionization energies.

To know more about period

https://brainly.com/question/16061498

#SPJ4

The volume of the copper is equal to  4cm³.

The density of the substance can be described as the substance's mass per unit of its volume. The symbol commonly used to express density is ρ and the D letter can also be used.

The mathematical formula of the density can be expressed as written below:

Density = Mass/Volume or ρ = m/V

The density of a material varies with temperature and pressure. There is a small variation for solids as well as liquids but much larger for gases. Increasing the pressure of material decreases the volume of material and thus increases its density.

Given the mass of the copper = 35.2 g

The density of the copper at  20°C, d = 8.80 g/cm³

The volume of the copper, V = mass/density = 35.2/8.80 = 4 cm³

Learn more about density, here:

brainly.com/question/15164682

#SPJ1

The pressure acting here is 3.32 atm. Then the volume of copper can be determined using ideal gas law. The volume is 3.9 L.

Ideal gas equation is a combination of   Boyle's law, Charle's law and Avogadro's law. The expression relating pressure, volume,   temperature and number of moles of a gas is written as:

PV = nRT.

It can be rearranged as PM = dRT.

where d is the density and M be the mass.

Atomic mass of copper = 63.5 g/mol

density = 8.80 g/cm³

T = 20° C or 293 K.

Then pressure p =  dRT/M

p = 8.80 g/cm³ × 0.082× 293 /63.5 = 3.32 atm

Now the weight of copper = 35.2 g

number of moles of Cu = 35.2/63.5 = 0.5 g.

Then, v = nRT/P

v = 0.5 × 0.082 × 293 /3.32 = 3.9 cm³.

Therefore, the volume of copper is 3.9 L.

Find more on ideal gas equation:

https://brainly.com/question/17254541

#SPJ1

Mass (often measured in grams) & volume are the two characteristics in this module through which we will create unit components to do statistical approach using different chemicals .

Chemical substances come in three different forms: elements, compounds, and mixtures. Elements are basically chemicals that don't contain any other substances. In this sense, elements are the fundamental constituents of chemical composition.

The component can be an isotope or a combination if it is pure. If a substance can be divided into its component elements, it is a compound. If a substance is not chemically pure, it is either a heterogeneous mixture or even a heterogeneous mixture. If the composition remains the same throughout, the combination is homogeneous.

To know more about chemical substances visit:

https://brainly.com/question/29637836

#SPJ4

The process of dissolution of KBr in water occurs because the final solution has a lower energy state than the two components separately.

What do you mean by endothermic?

Endothermic reactions are chemical reactions that absorb energy from their surroundings in order to proceed. This energy is usually in the form of heat and is absorbed from the surroundings in order to drive the reaction forward.

Even though the dissolution process is endothermic, it occurs because the enthalpy of solution is less than the sum of the enthalpies of the two components separately. The enthalpy of solution is the energy required to break the strong ionic bonds between the KBr molecules, allowing them to dissolve into the solution. The energy released from the formation of new hydrogen bonds between the KBr molecules and the water molecules is greater than the energy needed to break the ionic bonds, resulting in a net release of energy. This release of energy causes the overall process to be exothermic, even though the dissolution of KBr into water is endothermic.

To know more about endothermic,

https://brainly.com/question/6506846

#SPJ4

The dz2 and the dx2-y2 orbitals have lobes that point directly at the ligands in a square-planar crystal field in d orbitals.

The d orbitals are a set of atomic orbitals found in the second energy level (n = 2) of an atom. They have a higher energy than the s and p orbitals in the first energy level (n = 1), and are represented by the letters d, dx, dy, dz and dxy, dxz and dyz.The d orbitals are composed of four orbitals which are degenerate (having the same energy) in an isolated atom. But when an atom is in a compound, the d-orbitals split into different energy levels due to the influence of the electrostatic forces of the neighboring atoms. This is called the crystal field splitting, which depends on the symmetry of the crystal and the coordination number of the central atom.

Learn more about atomic orbitals here:

https://brainly.com/question/29561958

#SPJ4

Answer:

Explanation:

The equilibrium constant (Kc) is a measure of the relative concentrations of the reactants and products at equilibrium for a given chemical reaction. It is defined as the ratio of the product concentrations raised to their stoichiometric coefficients, to the reactant concentrations raised to their stoichiometric coefficients. For a general reversible reaction

aA + bB <=> cC + dD

The equilibrium constant is defined as:

Kc = [C]^c [D]^d / [A]^a [B]^b

where [X] represents the concentration of species X (in molarity units), and the superscripts on the concentrations represent the stoichiometric coefficients of the species in the balanced equation for the reaction.

The reaction quotient (Qc) is similar to the equilibrium constant, but it is calculated using the concentrations of the reactants and products at a given point in time, rather than at equilibrium. The reaction quotient is also defined as the ratio of the product concentrations raised to their stoichiometric coefficients, to the reactant concentrations raised to their stoichiometric coefficients, and is calculated using the same equation as Kc, but with the concentrations at a specific point in time, rather than at equilibrium.

Qc = [C]^c [D]^d / [A]^a [B]^b

It can be used to predict the direction of reaction depending on the sign of Qc, Kc.

If Qc < Kc, the reaction will shift in the direction of products.

If Qc > Kc, the reaction will shift in the direction of reactants

If Qc = Kc, the reaction is at equilibrium.

If you want to know more about equilibrium reaction you can check on Le Chatelier's principle.

Hazardous materials are substances or chemicals that pose a health hazard, a physical hazard, or harm to the environment.

To learn more about hazardous materials refers to:

brainly.com/question/27318175

#SPJ1

As stated in the preceding statement [Zn²⁺] = 1s²2s²2p⁶3s²3p⁶3d¹⁰, [Fe3+] = 1s²2s²2p⁶3s²3p⁶3d⁵, [Fe²⁺] = 1s²2s²2p⁶3s²3p⁶3d⁶, [Cd²⁺] = 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶4d¹⁰

Denotes to a basic material that isn't divided into smaller components or transformed into another chemical in chemistry. An atom, which is made up of protons, neutrons, and particles, is really the fundamental unit of an element. An element's atoms all equal the number of protons.

Dietary supplements include Zn²⁺ ions:

[Zn²⁺] = 1s²2s²2p⁶3s²3p⁶3d¹⁰

Mineral water contains Fe³⁺ cations:

[Fe3+] = 1s²2s²2p⁶3s²3p⁶3d⁵

Food supplements may include Fe²⁺ cations:

[Fe²⁺] = 1s²2s²2p⁶3s²3p⁶3d⁶

Paints had Cd²⁺ ions in them:

[Cd²⁺] = 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶4d¹⁰

To know more about Elements visit:

https://brainly.com/question/28376204

#SPJ4

The complete question is-

Read the labels of several commercial products and identify monatomic ions of at least four transition elements contained in the products.  Write the complete electron configuration of these cations.  Make sure to clearly identify which monatomic ions is found in which commercial product.

The 1.5 ml of a 10% solution that was made into a 3.0 ml solution by adding normal saline now has a new concentration of 5%.

The amount of material in a certain area is referred to as concentration in chemistry. Another definition states that concentration is the ratio of a solution's solute to its entire solution or solvent. Mass per unit volume is a common way to express concentration. However, moles or units of volume can also be used to express the solute concentration. Concentration could be per unit mass instead of volume. Concentration can be computed for any mixture, despite often being used with chemical solutions.

By mathematically dividing the mass, moles, or volume of the solute by the mass, moles, or volume of the solution, one may calculate the concentration (or, less commonly, the solvent).

Learn more about concentration here:

https://brainly.com/question/10725862

#SPJ4