What does electrical energy transform into when used by objects in a home?

Answers

Answer 1

Answer:

What can electrical energy be transformed into?

Electrical energy is transformed into many forms - mechanical/kinetic, sound, heat, light, and other forms of electromagnetic radiation - by everyday appliances.

Explanation:

Answer 2

Answer:

none of the other answers could be correct.

Explanation:

The sun nuclear energy transfers to radiant energy A fire Chemical energy transfers to thermal and radiant energy. wind turbine Kinetic motion energy transfers to electrical energy. Lightbulb Electrical energy transfers to radiant and thermal energy. Radio Electrical energy transfers to sound energy.


Related Questions

A water-skier is being pulled by a tow rope attached to a boat. As the driver pushes the throttle forward, the skier accelerates. A 73.5-kg water-skier has an initial speed of 5.2 m/s. Later, the speed increases to 12.2 m/s. Determine the work done by the net external force acting on the skier.

ANSWER FOR BRAINLIEST IF ANSWER IS GOOD

Answers

Ignore my comment, that information is unnecessary.

Assuming no friction between the skis and the water, the total work performed on the skier is due only to the pulling force (T, for tension). By Newton's second law, the net force exerted on the skier is

∑ F = T = ma

where m = 73.5 kg is the mass of the skier, and a is their acceleration.

Under constant acceleration, the skier is pulled a distance x such that

(12.2 m/s)² - (5.2 m/s)² = 2ax

and solving for x gives

x = (60.9 m²/s²) / a

Then the total work performed on the skier is

W = Tx

W = ma • (60.9 m²/s²) / a

W = (73.5 kg) (60.9 m²/s²)

W ≈ 4480 J

Above sea level, water boils at a __ temperature due to the __ atmospheric pressure.

Answers

Answer:

lower, lower

Explanation:

When atmospheric pressure is lower, such as at a higher altitude, it takes less energy to bring water to the boiling point. Less energy means less heat, which means water will boil at a lower temperature at a higher altitude.

Explain the relationship between pitch and frequency.

Answers

Answer:

Though pitch and frequency are not equivalent, they are correlated. This means that as one goes up, the other does as well. A higher frequency produces a higher pitch, and a lower frequency produces a lower pitch.

Explanation:

what is volume help plz

Answers

Answer:

Explanation:

Volume = Length x width x height

Multiply the length, width and, height to get the volume of the question.

Change in inherited characteristics over time is called what?

Answers

Answer:

characteristics

Explanation:

Change in inherited characteristics over time is called what?Change in inherited characteristics over time is called what?Change iChange in inherited characteristics over time is called what?n inherited characteristics over time is called what?Change in inherited characteristics over time is called what?

Change in inherited characteristics over time is called what?Change in inherited characteristics over time is called what?Change in inherited characteristics over time is called what?

[tex] \color{blue}{ \sf lololololololol}[/tex]

What do scientists theorize about the origins of the Moon? Choose the most accepted explanation.

Answers

Answer:

What is most widely accepted today is a the giant-impact theory. It proposes that the Moon formed during a collision between the Earth and another small planet, about the size of Mars. The debris from this impact collected in an orbit around Earth to form the Moon.

4) What is the kinetic energy of a 5 kg object moving ot a velocity of 25 m/s?
Help me please I’m confused

Answers

Kinetic Energy (KE)
Mass(m)
Velocity(V)

KE= 1/2 (m) (V^2)
KE=(.5)(5kg)(25^2m/s)
KE= (.5)(5kg)(625m/s^2)
KE= (.5)(3125kgm/s^2)
KE=1562.5 (kgm/(s^2))

The region of the globe directly beneath the Sun is warmer because it ____. A. sees more intense wavelengths reaching the surface B. is closer to the Sun C. has more yearly daylight than other parts of Earth D. receives direct sunlight

Answers

The answer is A. Sees more intense wavelengths reaching the surface

Mass can be measured with a triple
beam balance in units of
Resources
A. grams
B. Newtons
C. cubic centimeters
D. millimeters

Answers

Answer:

A

Explanation:

Ana wonders how light can affect a mystery material. The table below shows what happens when different types of light hit the mystery material.

Answers

The light can definitely change the mystery material. This can occur through a change in temperature or color (option C).

A material is affected by light mainly if the material absorbs the light. Based on the chart, we know this mystery material can absorb two types of light:

Red light.Yellow light.

Moreover, this phenomenon can lead to two main changes:

Change in temperature: Light affects materials by increasing their temperature of these. A common example is the way the temperature of an object increases if it is exposed to sunlight.Change in color: Some materials react to light by changing their color.

Based on this, the material can change its color or temperature.

Note: This question is incomplete; here is the missing part:

A. Yes, but the mystery material can change in only one way, such as by getting warm, because all the light that a material absorbs will affect that material in the same way.

B. No. The mystery material can’t change because the light is not a physical thing. Light cannot change physical things like the mystery material.

C. Yes and the mystery material can change in one or two different ways, such as by getting warm and/or changing color, because different types of light can cause different changes to a material when they are absorbed.

D. There is no way to know whether the mystery material will change or not.

Learn more about sunlight in: https://brainly.com/question/1603783

In the Bohr model of the hydrogen atom, the speed of the electron is approximately 2.2 106 m/s.
Find the central force acting on the electron as it revolves in a circular orbit of radius 4.63 x 10-11 m.
Answer in units of N.

Answers

The central force acting on the electron as it revolves in a circular orbit is [tex]9.52 \times 10^{-8} \ N[/tex].

The given parameters;

speed of electron, v = 2.2 x 10⁶ m/sradius of the circle, r = 4.63 x 10⁻¹¹ m

The central force acting on the electron as it revolves in a circular orbit is calculated as follows;

[tex]F = \frac{M_e v^2}{r} \\\\[/tex]

where;

[tex]M_e[/tex] is mass of electron = 9.11 x 10⁻³¹ kg

[tex]F = \frac{(9.11 \times 10^{-31}) \times(2.2\times 10^6)^2 }{4.63 \times 10^{-11}} \\\\F = 9.52 \times 10^{-8} \ N[/tex]

Thus, the central force acting on the electron as it revolves in a circular orbit is [tex]9.52 \times 10^{-8} \ N[/tex].

Learn more about centripetal force here:https://brainly.com/question/20905151

A baseball player at practice is pushing a tackling dummy across the field. He initially has to push the 130 kg dummy with 600 Newton’s of force to get it to start moving and maintain a force of 475 to keep it moving at a steady state. What are the coefficient of friction static and kinetic with the dummy on the ground
.

Answers

Answer:

Static= 600/(130*9.8)=0.47

Kinetic=475/(130*9.8)=0.37

11. A tennis ball is thrown straight up in the air, leaving the person's hand with an initial velocity of 3.0 m/s, as shown to the right. What is the displacement of the ball above the person's hand?​

Answers

Answer:

0.46m

Explanation:

What is the average speed of a car that travels 30 m in the 3 secs and 2 m 4 secs and 20 m 5 secs

Answers

Answer:

4.3333333

Explanation:

total distance / total time taken

30 + 2 + 20 / 3 + 4 + 5

52 / 12

4.3 recurring

the image in figure 16.36 combines observations made with visible light and radio telescopes. which color in the image represents the radio emission?

Answers

Answer: pinkish- white

Purple

Explanation:

how to prove sand is not a fluid even if it takes the shape of a container

Answers

Solids can be any size or shape. Sand is a solid that has the ability to be poured like a liquid and take the shape of its container. It is still a solid, as each individual grain of sand has a shape of its own and keeps that shape.

what prevents the planets in our solar system from floating away?
A. Earth's gravitational pull
B. planets gravitational pull on one another
C. moon's gravitational pull
D. suns gravitational pull​

Answers

The suns gravity keeps planets in their orbits. There is no other force in space to pull them out of their orbits therefore they stay.

Suns' gravitational pull​ prevents the planets in our solar system from floating away, therefore the correct answer is option D.

What is a solar system?

It is a structure in which the sun's attractive force causes all the planetary systems and celestial bodies to revolve around this.

The Sun is believed to be located in the system's center in the sun-centered concept upon which our Solar System is founded.

The primary factor that causes the planets in the solar system to revolve around the sun is gravity.

                                         

The sun's pull of gravity prohibits the planets in our planetary system from moving away, hence option D is the appropriate

To learn more about Solar systems, refer to the link given below;

brainly.com/question/12075871

#SPJ2

A600kg car is acted force of 1200N starting from rest.how travel in 10 seconds?

Answers

Answer:

x= 100 m

Explanation:

m= 600 kg

t= 10 s

F= 1200N

v0= 0

-----

F=ma

a=F/m

x= (v0)t + (1/2)(a)(t^2)

x= (1/2)(F/m)(t^2)

x= (1/2)(1200/600)(10^2)

x= 100m

Which of these ALL require direction? Force, Time, Acceleration Displacement, Velocity, Force Mass, Time, Speed Speed, Velocity, Distance



PLS ANSWER QUICK!!!!

Answers

Answer:

force, acceleration, displacement, velocity requires direction

What did Ernest Rutherford expect to happen when he aimed a beam of particles at a thin gold foil

Answers

Answer:

he expected a fire to happen I think

Answer:

When Ernest Rutherford aimed a beam of particles at a thin gold foil he expected that the particles would be deflected slightly after passing through the foil.

Explanation:

hope it helped

Which statement explains the first law of thermodynamics?.

Answers

Energy is transformed and transferred in a thermodynamic system. Option B is correct

First law of thermodynamics:

It states the energy neither be created nor destroyed. It change its form from one to another. It is also known as law of conservation of energy.

It is given by the formula,

[tex]\Delta U = Q - W[/tex]

Where,

[tex]\Delta U[/tex] - change in internal energy

[tex]Q[/tex] -    heat added

[tex]W[/tex]-    work done by the system

Since, heat is a form of energy, hence it is follow the principle of conservation of energy.

Therefore, energy is transformed and transferred in a thermodynamic system. Option B is correct

To know more about First law of thermodynamics:

https://brainly.com/question/7107028

Answer:

2: A,D,E or 1,4,5

3: B

4: B

5: 12 joules

6: 53 joules

7: B,C,E or 2,3,5

8: 2,4,3,1

9: Electrical energy in the stove is transformed into heat. The heat flows to the water in the kettle, increasing the internal energy of the water. As the energy in the water increases, the water molecules move faster until the liquid water becomes water vapor. The water vapor does work on the whistle, causing it to make a sound. Energy is neither created nor destroyed, it has simply changed form in the process.

Explanation:

youre welcome

Do I look good yes or no

Answers

Answer:

0/10

Explanation:

_--------------------

Answer:

No. -infinity/10

Explanation:

Ew. Just why, like no.

The right of an individual or organization to initiate a court case, on the basis of having substantial stake in the outcome, is known as

Answers

Answer: The right of an individual or organization to initiate a court case, on the basis of having substantial stake in the outcome, is known as "standing"

Over a period of 2.50 seconds, a speedboat accelerates uniformly from 18.5 m/s to 46.5 m/s. What is the acceleration of the speedboat relative to the shore?

Answers

The answer is : 11.2 m/s2

According to the question, the acceleration of the speedboat relative to the shore is found to be 11.2 [tex]m/sec^2.[/tex]

What is Acceleration?

Acceleration may be characterized as the rate of change of the velocity of an object with respect to time. It is a vector quantity, as it defined both magnitude and direction. This allows you to measure how fast velocity changes in meters per second squared (m/s^2).

According to the question,

The initial velocity of the boat = 18.5 m/s.

The final velocity of the boat = 46.5 m/s.

Difference in velocity = Final velocity - Initial velocity = 46.5-18.5 = 28 m/s.

The formula for calculating the acceleration of the boat is as follows:

a = Difference in velocity/time taken.

           = 28/2.50 = 11.2 [tex]m/sec^2[/tex].

Therefore,  the acceleration of the speedboat relative to the shore is found to be 11.2 [tex]m/sec^2.[/tex]

To learn more about Acceleration, refer to the link:

https://brainly.com/question/460763

#SPJ6

PLEASE HELP!! 10 points!!!! brainliest!!!
Why is a sound wave considered to be a mechanical wave? What properties of sound
waves are responsible for pitch and volume

Answers

Answer:

Mechanical Sound Waves - A sound wave moves through air by displacing air particles in a chain reaction. ... Sound energy, or energy associated with the vibrations created by a vibrating source, requires a medium to travel, which makes sound energy a mechanical wave. For pitch the higher the frequency, the higher the pitch. Frequency is measured in hertz, or cycles per second. Frequency also affects loudness, with higher-pitched sounds being perceived as louder. Amplitude and frequency of sound waves interact to produce the experiences of loudness and pitch.

Mechanical Sound Waves - A sound wave moves through air by displacing air particles in a chain reaction. ... Sound energy, or energy associated with the vibrations created by a vibrating source, requires a medium to travel, which makes sound energy a mechanical wave. For pitch the higher the frequency, the higher the pitch. Frequency is measured in hertz, or cycles per second. Frequency also affects loudness, with higher-pitched sounds being perceived as louder. Amplitude and frequency of sound waves interact to produce the experiences of loudness and pitch.

A pendulum has a mass of 3 kg and is lifted to a height of 0.3 m. What is the maximum speed of the pendulum

Answers

The Energy of the pendulum is

mass*gravity*heigh--> 3kg*0.3m*9.81N/kg=8.829

And so the maximum speed is :

Energy=0.5*mass*speed*speed

reshape to speed:

Speed = 2.426 meters per secound

PLEASE HELP WILL GIVE BRAINLIEST

Answers

Answer:

D, A

Explanation:

PE=KE according to law of conservation of energymgh=1/2mv²gh=1/2v²v²=2ghv²=2(10)(50)v²=1000v=10√10m/s²=31.6m/s²

#1

Height is same for all cars

So they all will arrive at same speed but A will come first

Option D

draw the following vector quantity Using the coordinate system.
a. 190 newton east
b. 120km/hr, 250 north of east
c. 60 meters southwest​

Answers

The given vectors quantities can be described by their properties of both

magnitude and direction.

a. The drawing of the vector extending from point (0, 0) to (190, 0) on the coordinate plane is attached.b. The velocity vector extending from  (0, 0) to (108.76, 50.714) on the coordinate plane is attached.c. The displacement vector extending from (0, 0) to (30·√2, 30·√2) is attached.

Reasons:

a. The magnitude of the vector = 190 N

The direction in which the vector acts = East

Therefore, in vector form, we have;

[tex]\vec{F}[/tex] = 190 × cos(0)·i + 190 × sin(0)·j = 190·i

The vector can be represented by an horizontal line, 190 units long

Coordinate points on the vector = (0, 0) and (190, 0)

The drawing of the vector with the above points using MS Excel is attached.

b. Magnitude of the velocity vector = 120 km/hr. 25° North of east

Solution;

The vector form of the velocity is; [tex]\vec{v}[/tex] = 120 × cos(25)·i + 120×sin(25)·j, which gives;

[tex]\vec{v}[/tex] = 120 × cos(25)·i + 120×sin(25)·j ≈ 108.76·i + 50.714·j

[tex]\vec{v}[/tex] ≈ 108.76·i + 50.714·j

Therefore, points that define the vector are; (0, 0) and (108.76, 50.714)

The drawing of the vector is attached

c. The magnitude of the vector = 60 m

The direction of the vector is southwest = West 45° south

The vector form of the displacement is [tex]\vec{d}[/tex] = 60 × cos(45°)·i + 60 × sin(45°)·j

Which gives;

[tex]\vec{d}[/tex] = 30·√2·i + 30·√2·j

Points on the vector are therefore; (0, 0), and (30·√2, 30·√2)

The drawing of the vector is attached

Learn more about vectors here:

https://brainly.com/question/10409036

what are the ending materials produced from cell respiration

Answers

Carbon dioxide and water :) hope this helped!

Answer:

The products of cellular respiration are carbon dioxide and water

Explanation:

a)iii) as the wheelbarrow was being pushed, the tyre went over a small stone. Describe and explain how the pressure changes.

Answers

Answer:

it changed because the rock put the pressure all in one spot.

Explanation: