measurement is the process of finding the value of any Unknown physical quantities in standard value.
Mark me as a brainlist
Measurement has been defined as the concept widely used in math and science to quantify an object. It is used to denote the quantification of the event or the object with respect to other or individually.
Hence, the definition of measurement is the process of determining the size or smallness of a physical amount by comparing it to a reference quantity of the same kind as the object.
It has been used to determine the quantity to be small or large based on some predetermined standard or values. It compares the physical quantity like mass can be estimated using kilograms or grams.
Learn more about measurement, here:
https://brainly.com/question/2107310
#SPJ7
A burning candle demonstrates the following type of energy transformations.
A: chemical → heat → light
B: heat → chemical → light
C: electrical → light
D: chemical → electrical → light
Answer:
B
Explanation:
the candle is hot so the first energy form should be heat. u could now just eliminate the rest but for further notice. the heat melts the wax in the candle, which is a physical change but also the thread is burning out which is a chemical change then light follows
Assume that the heat lost by the surface is gained by ethyl chloride. What enthalpies must you consider if you were to calculate the final temperature of the surface
Answer:
Specific heat of ethyl chloride in gas and liquid phases, enthalpy of vaporization and specific heat of solid surface.
Explanation:
In order to determine the final temperature, the heat lost by the chloride needs to be found. This would require the specific heat in both phases and the enthalpy of vaporization. (you will use q=mc(delta)T and q=m(delta)H)
Then the energy gained by the surface needs to be found. This will require the specific heat in order to use the q=mc(delta)T equation.
The enthalpies that we consider to calculate the final temperature of the surface are Specific heat of surface and ethyl chloride as well as Heat of vaporization of liquid & vapor ethyl chloride.
What is enthalpy?Enthalpy of any reaction tells about the total amount of heat absrobed and released during a chemical reaction.
According to the question, heat released by the surface is absorbed by the ethyl chloride and by absorbing this energy ethyl chlorode will change into the vapor form. In the whole process if we want ot calculate the final temperature on the surface then we should consider:
Specific heat of surface.Specific heat of ethyl chloride.Heat of vaporization of liquid ethyl chloride.Heat of vaporization of vapor ethyl chlorideHence, required enthalpies are Specific heat of surface and ethyl chloride as well as Heat of vaporization of liquid & vapor ethyl chloride.
To know more about enthalpies, visit the below link:
https://brainly.com/question/11628413
How many total atoms of Nitrogen are shown in the formula below?
formula in question: 4N20
awnsers for problem
A.2
B.4
C.6
D.8
includes photo
Giveing 50 brainlys to the right awnser
The number of atoms of nitrogen in 4N₂O is 8 atoms.
Atom are the basic or fundamental units of matter that defines its structure.
The atom housed the proton, neutron and electron. The atoms of nitrogen in 4 moles of the Nitrogen oxide is the number of each nitrogen present in it .
Therefore,
4N₂O → Number of atoms of Nitrogen will be 4 × 2 = 8 atoms.
Therefore, the number of atoms of nitrogen in the compound 4N₂O is 8.
read more: https://brainly.com/question/18777500?referrer=searchResults
Observe the superscript of N
It's 2Means
There is 2 atoms of N in 1 molecule of Nitric oxideNow as there is 4 multiplied
Total atoms=4(2)=8I. Indicate whether the following statements are true or false 1. The entropy of a fixed amount of an incompressible substance increases in every process for which temperature increase. A: True B: False 2. A closed system can experience a decrease in entropy only when there is heat transfer from the system to its surroundings during the process. A: True B: False 3. Entropy is produced in every internally reversible process of a closed system. A: True B: False 4. In an adiabatic and internally reversible process of a closed system the entropy remains constant A: True B: False 5. The entropy of a fixed amount of an ideal gas increases in every isothermal process A: True B: False 6. The energy of an isolated system must remain constant, but the entropy can only decrease A: True B: False 7. The entropy change of a closed system during a process can be greater than, equal to, or less than zero. A: True B: False
For the formula shown, how many sulfur atoms are represented?
Answer:
Your answer would be 6
Answer:
1 it is 1
Explanation:
explain why water wasn't used in crackers?
which one is not allotropes of carbon?
Answer:
B. Activated Carbon
Explanation:
What is a peninsula?
Answer:
A peninsula ( Latin: paeninsula from paene "almost" and insula "island") is a landform surrounded by water on most of its border while being connected to a mainland from which it extends.
Explanation:
CAN I GET BRAINLIEST
Determine the concentration of a diluted solution of sodium chloride that was prepared by diluting 20.0 mL of a 4.5 M solution of sodium chloride to 500.0 mL.
Answer:
ok
Explanation:
The empirical formula of hydrazine, molecular mass 32 grams, is NH2. What is the molecular formula of hydrazine?
A) (NH)4
B) N2H4
C) NH
D) NH2
Answer:
B) N2H4
Explanation:
Calculate the pH at the equivalence point for the following titration: 0.25 M HCOOH versus 0.25 M NaOH.
The pH at the equivalence point for the titration of 0.25 M HCOOH versus 0.25 M NaOH is 8.5.
Let's consider the following neutralization reaction.
HCOOH + NaOH ⇒ HCOONa + H₂O
At the equivalence point, 0.25 M HCOOH completely reacted with 0.25 M NaOH to form 0.25 M HCOONa.
HCOONa undergoes hydrolysis. The net ionic equation is:
HCOO⁻(aq) + H₂O(l) ⇄ HCOOH(aq) + OH⁻(aq)
Given the concentration of HCOO⁻ is 0.25 M (Cb) and the basic dissociation constant of HCOO⁻ is 4.8 × 10⁻¹¹ (Kb), we can calculate the concentration of OH⁻ using the following expression.
[tex][OH^{-} ] = \sqrt{Kb \times Cb } = \sqrt{(4.8 \times 10^{-11} ) \times 0.25 } = 3.5 \times 10^{-6} M[/tex]
The pOH of the solution is:
[tex]pOH = -log [OH^{-} ] = -log (3.5 \times 10^{-6} ) = 5.5[/tex]
The pH of the solution is:
[tex]pH = 14 -pOH = 14 -5.5 = 8.5[/tex]
The pH at the equivalence point for the titration of 0.25 M HCOOH versus 0.25 M NaOH is 8.5.
Learn more: https://brainly.com/question/2728613
What is a reaction that alkanes undergo ?
A. precipitation reactions
B. combustion reaction
C. acid base reactions
D. all of the above
Eating a healthy breakfast gives your body the energy needed to help you start your day.. The girl in the photo is having cereal and orange jucie, both of which habe stored _____ energy, a form of ____________ energy. The girls body breaks down the components of the food to access the energy __________ in them. Later in the day, some of this energy is _______ into _ energy that will alow the girl to study and play sports. Some of this energy is also _________ into ____ energy that keeps her body warm.
Answer:
Words are filled in
Eating a healthy breakfast gives your body the energy needed to help you start your day.. The girl in the photo is having cereal and orange jucie, both of which have stored chemical energy, a form of potential energy. The girls body breaks down the components of the food to access the energy in them. Later in the day, some of this energy is transformed into kinetic energy that will allow the girl to study and play sports. Some of this energy is also transformed into thermal energy that keeps her body warm.
Explanation:
Help please :) with this
Answer:
The answer is 3
Explanation:
Hope this helps and have a wonderful day.
Identify key concepts/terminologies about solutions or concentration of solutions
PLS HELP ASAP!!
identify keys concepts/terminologies about solutions or concentration of solutions.
Answer:They are the two basic solution concentration terms that you need to know.We always need to keep an account of the amount of solute in a solution.The amount of solute in the solvent is what is called the concentration of a solution.In chemistry,we define concentration of solution as the amount of solute in a solvent.
Explanation:Depending upon amount of solute present,it is called a dilute, concentrated or a saturated solution.Different substances in a given solvent have a different solubilities at the same temperature.The most common method for expressing the concentration of a solution is the percentage method
#Carry On Learning :)How many moles of lithium hydroxide would be required to produce 38.5 g of Li₂CO₃ in the following chemical reaction?
2 LiOH(s) + CO₂(g) → Li₂CO₃(s) + H₂O(l)
Numer of moles of Li₂CO₃:
[tex]\longrightarrow\: n_{(Li_2 CO_3)} = \dfrac{38.5}{(6 \times 2) + 12 + (16 \times 3)}[/tex]
[tex]\longrightarrow\: n_{(Li_2 CO_3)} = \dfrac{38.5}{12+ 12 +48}[/tex]
[tex]\longrightarrow\: n_{(Li_2 CO_3)} = \dfrac{38.5}{72}[/tex]
[tex]\longrightarrow\: n_{(Li_2 CO_3)} = 0.53473 \: mol[/tex]
Chemical Reaction:
2 LiOH(s) + CO₂(g) → Li₂CO₃(s) + H₂O(l)
1 mole of Li₂CO₃ is formed from 2 moles of LiOH.Therefore, applying unitary method:
0.53473 mole of Li₂CO₃ is formed from 2 × 0.53473 = 1.06946 moles of LiOH.No. of moles of lithium hydroxide would be required to produce 38.5 g of Li₂CO₃ in the following chemical reaction are 1.03.
What is mole concept?Avogadro's number is the number of units in one mole of any substance and equals to 6.02214076 × 10²³. The units can be electrons, atoms, ions, or molecules.
No. of moles is defined as a particular no. of particles that we can calculate with the help of Avogadro’s number.
Mass of a particular product is also find out by stoichiometry of a reaction as per the no. of mole given in the reaction.
Given,
2LiOH(s) + CO₂(g) → Li₂CO₃(s) + H₂O(l)
2 moles of LiOH are required to produce 73.8g Li₂CO₃
0.027 moles of LiOH are required to produce 1g Li₂CO₃
1.03 moles of LiOH are required to produce 38.5 Li₂CO₃
Therefore, No. of moles of lithium hydroxide would be required to produce 38.5 g of Li₂CO₃ in the following chemical reaction are 1.03.
Learn more about mole concept, here:
https://brainly.com/question/31123980
#SPJ2
Dirty water is a _____.
mixture
or
compound ?
Answer: mixture
Explanation: they are heterogeneous mixtures not homogeneous
It's Mixture
Reason:- Dirty water is a mixture of dirt and water. Mixture are made up of 2 or more different substance with different characteristics
The volume of a ballon is 2.85L at 1.00 atm. What pressure is required to compress the balloon to a volume of 1.70L?
Answer:
1.68 atm (if temperature is constant)
Explanation:
p1 * v1 = p2 * v2
1 * 2.85 = p2 * 1.70
2.85 / 1.70 = p2
p2 = 1.6764
There are so many gas laws like Charles's law, Avogadro’s law and many more, out of which Boyle's law is one of the most important law among all gas laws. The pressure is required to compress the balloon to a volume of 1.70L is 1.6764 atm.
What is Boyle's law?According to Boyle's law pressure is inversely proportional to volume at constant Temperature. It is applicable only on the ideal gases. Since temperature is constant here, we can apply this law.
Mathematically
P₁V₁=P₂V ₂
P₁= initial pressure of balloon =1.0atm
V₁= initial volume balloon =2.85L
P₂=final pressure balloon =?
V ₂=final volume balloon =1.70L
Putting all values
1 × 2.85 = P₂×1.70
2.85÷ 1.70 = P₂
P₂ = 1.6764 atm
Therefore, the pressure is required to compress the balloon to a volume of 1.70L is 1.6764 atm.
To know more about Boyle's law, here:
https://brainly.com/question/1437490
#SPJ2
Which group is composed entirely of nonmetals?
Answer:
These are the nonmetals.
Which of the following represents alpha decay?
O A. 169 Gd 108TB +_9e
B. 159 Eu + je → 189 Sm
150
-
C. 90T = 9T +
→ 43
O D. GO → 1945m + He
148
There are two modes in which unstable nuclei of radioactive elements may decay. They are by α - emission or by β - emission. Among the given options, the α - emission is ₆₄¹⁴⁸Gd → ₆₂¹⁴⁴Sm + ₂⁴He. The correct option is D.
What is α - decay?According to the theory of radioactive disintegration, the atoms of all the radioactive elements undergo spontaneous disintegration with the emission of α or β particles to yield atoms of new elements. When a radionuclide decays by emitting an α - particle, it is called α - decay.
When a radionuclide undergoes α - emission, i.e. a helium nucleus there occurs a decrease of 2 units in the atomic number and a decrease of 4 units in the mass number. The new nuclide produced has an atomic number 2 units less and a mass number 4 units less than the parent.
₆₄¹⁴⁸Gd → ₆₂¹⁴⁴Sm + ₂⁴He represents α - emission.
Thus the correct option is D.
To know more about α - emission, visit;
https://brainly.com/question/14921881
#SPJ7
How do atomic and molecular interactions explain the properties of matter that we see and feel
The atomic and molecular interactions unveil the bulk properties of matter in our environment by ways of the fact that everything in the whole universe is made of either atoms, molecules or even ions
How matter is made up of atoms and molecules?It has been proven practically everything in the whole universe is matter and everything which interact with matter is also matter. This explains to us the reasons why matter could be atoms, molecules or ions.
That being said, some substances (matter) is made up of atoms of elements, some made up of molecules or atoms and molecules and others ions or both. However, matter is anything which has mass and occupies space.
In conclusion, we can now conclude from the explanation above that the properties of matter are as a result of the interaction which exists between matter at the atomic and molecular level.
Read more on matter:
https://brainly.com/question/3998772
#SPJ1
Wyndirbu lie the following best describes the role played by
hydraulic fluid a hydraulic machine?
А
A source of fuel
B
A medium for the transfer of force
С
A coolant
D
A cleaning agent
Help pls
The role played by hydraulic fluid in a hydraulic machine is as a medium for
the transfer of force.
Hydraulic fluid is used primarily in a hydraulic machine for the transfer of
force from one point to another. This makes the system able to perform the
required functions.
Hydraulic fluid also has other functions such as being a coolant and as a
cleaning agent(removal of contaminants) which aren't its major function.
Read more on https://brainly.com/question/25514384
What is heat of reaction? Tell me In a short description?
Answer:
The Heat of Reaction (also known and Enthalpy of Reaction) is the change in the enthalpy of a chemical reaction that occurs at a constant pressure. It is a thermodynamic unit of measurement useful for calculating the amount of energy per mole either released or produced in a reaction.
What is scalar quantity ?
Answer:
they physical quantities that are uneffected by changes to a vector space basis
Respiration describes the process that living cells use to release energy by combining sugar and oxygen. The primary chemical changes that happen during respiration are shown in the equation below.
C6H12O6 + 6O2 ---> 6CO2 + 6H2O + energy
Which statement correctly compares the reactants and products of the equation?
A.
The mass of the reactants is less than the mass of the products.
B.
The mass of the reactants is greater than the mass of the products.
C.
The mass of the reactants is the same as the mass of the products.
D.
The number of reactant molecules is greater than the number of products.
Answer:
C the mass of the reactant molecules is the same as the mass of the product
How many molecules of oxygen can be made from 9.52g of nickel (III) oxide?
Answer:
165.385 g/mol
Which of the following solutions represents a good buffer system? a solution that is 0.10 mol L-1 NaOH and 0.10 mol L-1 KOH a solution that is 0.10 mol L-1 HCl and 0.10 mol L-1 NH4+ a solution that is 0.10 mol L-1 HF and 0.10 mol L-1 CH3COONa a solution that is 0.10 mol L-1 HCl and 0.10 mol L-1 KCl a solution that is 0.10 mol L-1 CH3COOH and 0.10 mol L-1 CH3COOLi
Answer:
chu papi
Explanation:
When 0.005 moles of silver(1) nitrate reacts with sodium carbonate, which of the following statement is correct?
(You must show all your work)
A) This is a redox reaction
B) This is a precipitation reaction and 0.69 g of the precipitate will be formed
C) This is a precipitation reaction and 1.38 g of the precipitate will be formed
D) This is a precipitation reaction and 0.83 g of the precipitate will be formed
Explanation:
no sé de qué me estás hablando
This is a precipitation reaction and 1.38 g of the precipitate will be formed is the statement is correct. Hence, option C is correct.
What is a precipitation reaction?A precipitation reaction is when two or more dissolved chemicals combine to form one solid products. The exchange of ions between ionic compounds in aqueous solutions is a common component of these reactions, which are also occasionally referred to as double displacement, double replacement, or metathesis reactions.
in response to precipitation a process that converts soluble salts into solids that are insoluble in water. a neutralizing response an interaction between an acid and a base that results in the production of salt, water, and an ionic molecule.
Precipitate refers to a solid that forms from a solution. The blending of two transparent solutions is a common example: NaCl in combination with silver nitrate The answer is. The soli cannot be dissolved in water.
Thus, option C is correct.
For more information about precipitation reaction, click here:
https://brainly.com/question/24158764
#SPJ2
Calculate the number of carbon dioxide (CO2) molecules produced in the
reaction if 0.7525 moles of oxygen gas (O2) are consumed.
Answer:
4.530 X 10^23 MOLECULES OF CO2
Explanation:
Calculate the number of carbon dioxide (CO2) molecules produced in the
reaction if 0.7525 moles of oxygen gas (O2) are consumed
so
C + O2-----------CO2
1 MOLE OF 02 produces 1 mole of CO2
so
0.7525 moles O2 produce 0.7525 moles
1 mole is 6.02 X 10^23
so
0.7525 moles is 0.7525 X 6.02 X 10^23 -
=
4.530 X 10^23 MOLECULES OF CO2
Thermal energy is associated with _____.(1 point)
electric charge
particle motion
bond strength
substance volume
Answer:
see below
Explanation:
1. particle motion
2. The particles of a liquid can slide past one another.
3. the kinetic energy required to break forces between particles
4. increasing its temperature until it transitions from a solid to a liquid
5. A liquid becomes a gas.
[quizlet: captncrun]
Thermal energy is in the form of heat and light is always associated with the random motion of atoms and molecules. That form of kinetic energy is used to the rise in temperature.
The energy is released from the particles that are heated and collide with each other. This takes place by the particle motion.Hence the option B is correct.
Learn more about the Thermal energy is associated with.
brainly.com/question/16953428.