What is not one of the 3-stage parametric equalizer adjustments on a yaesu ft-dx10?.

Because local yielding or deformation occurs in ductile materials and thus reduces the concentration, stress concentration in ductile materials is not as severe as it is in brittle materials.

In the part design, a stress concentration is a location where the stress is much higher than it is elsewhere. The geometry of the part's sharp corners, holes, notches, or grooves is what most frequently causes stress concentrations. In order to ensure the component functions properly and safely, it is crucial to analyze it for stress concentration. The system's balance may be further hampered and serious repercussions may result if the fabricated or produced component is not entirely functioning under stress. The term "stress concentration" refers to a location that exhibits an abrupt geometric transition or discontinuity and is characterized by high localized stress relative to the body's average stress.

Learn more about concentration  here:

https://brainly.com/question/13441104

#SPJ4

The vertical displacement at the center of the loaded shaft is zero. The vertical displacement at the end of the loaded shaft is equal to the length of the shaft multiplied by the slope of the shaft.

What is vertical displacement?
Vertical displacement in tectonics refers to the movement of land inside a vertical direction, which causes uplift and subsidence. Rock layer displacement can reveal information about how and why the lithosphere of Earth evolves over the course of geologic time. Vertical displacement can be caused by a variety of processes, including isostatic adjustments and tectonic activity. When crust is reorganised as a result of a seismic event, tectonic activity causes vertical displacement. Vertical displacement as a result of sinking from an increased load and isostatic rebound from a removed load is the outcome of isostatic corrections. At the margins of convergent and divergent plate boundaries, tectonic activity results in vertical displacement. As the magma begins to rise to protrude weaker lithospheric crust, the movement of the magma in the asthenosphere can cause divergent plate boundaries.

To learn more about vertical displacement
https://brainly.com/question/24004804
#SPJ4

Automatic reordering occurs when inventory levels dip below a pre-established threshold.

To learn more about  inventory management refer

https://brainly.com/question/13439318

#SPJ4

int[] my_array = {1, 2, 3, 4, 5}; correctly demonstrates the use of an array initializer list.

What is an array?

An array is a data structure in computer science that consists of a collection of elements, each of which is identified by at least one array index or key. A mathematical method is used to compute the position of each element from its index tuple in an array. An array of ten 32-bit (4-byte) integer variables with indices 0 through 9 may, for example, be stored as ten words at memory addresses 2000, 2004, 2008,..., 2036, with the element with index I having the address 2000 + I 4).

To learn more about array
https://brainly.com/question/28632808

#SPJ4

​A data flow diagram (DFD) shows how a system transforms input data into useful information.

In Computer technology, data simply refers to any representation of factual instructions or information in a formalized and structured manner, especially as a series of binary digits (bits), symbols, characters, quantities, or strings that are used on computer systems in a company.

A data flow diagram (DFD) can be defined as a type of chart that is designed and developed to illustrate how information is moved and transformed in a computer system or process.

This ultimately implies that, a data flow diagram (DFD) can be used to show data inputs, data outputs, storage locations, and all of the routes that are required.

Read more on data here: brainly.com/question/26207955

#SPJ1

Assuming demand paging with three frames, the number of page faults that would occur for the following replacement algorithms are:

Demand paging is a way of managing virtual memory in computer operating systems. In a demand paging system, the operating system transfers a disk page into physical memory only if it is attempted to be accessed and the page is not already in memory.

The LRU page replacement method creates a new page by replacing the least recently used page in memory. The LRU page replacement technique is based on the idea that the least recently used page in memory will not be utilized for a long period.

The most basic page replacement technique is the FIFO Replacement Algorithm. In this technique, the operating system maintains a list of all pages in memory in a queue, with the oldest page at the top.

The best page replacement algorithm is optimal page replacement since it produces the fewest number of page defects. The pages that will not be utilized for the greatest period of time in the future are replaced by this algorithm.

Learn more bout page faults:
https://brainly.com/question/24128255
#SPJ1

Steel angle is not an example of a cold-formed steel product.

What is steel?
In order to increase its strength and resistance to fracture in comparison to other kinds of iron, steel is an alloy composed of iron and often contains a few tenths of a percent of carbon. Many additional components could be included or added. An additional 11% chromium is often required for corrosion- and oxidation-resistant stainless steels. Steel is utilised in structures, infrastructure, tools, vehicles, machinery, electrical appliances, weaponry, and rockets due to its great tensile strength and low price. Steel's foundational metal is iron. It can take one of two crystalline (allotropic) forms, body-centered cubic or face-centered cubic, depending on the temperature. Steel and cast iron's variety of special qualities are a result of the interaction of the various iron allotropes with the alloying elements, primarily carbon.

To learn more about steel
https://brainly.com/question/26654853
#SPJ4

A microphone preamplifier with an input impedance of 1,000 ohms would be best for a microphone that has an output impedance of 100 ohms.

What is microphone preamplifier?
The electronic circuitry found inside a microphone or a different object or circuit to which the microphone is linked can both be referred to as microphone preamplifiers. The microphone preamplifier serves the same role in either scenario. A microphone preamplifier is a piece of sound engineering gear that gets a microphone signal ready for other gear to handle. Frequently, microphone signals are too weak to be adequately conveyed to equipment like mixing consoles and recording devices. Preamplifiers boost a microphone signal to line level by offering steady gain and reducing generated noise, which would otherwise cause the signal to be distorted. See Gain stage for more discussion on signal level. Informally, a microphone preamplifier is referred to as a mic preamp, micamp, preamp, mic pre, and pre.

To learn more about microphone preamplifier
https://brainly.com/question/15735185
#SPJ4

The exit velocity of the nitrogen and (b) the ratio of the inlet to exit area a1/a2 is 0.8 g.

PI= 60 KPa

Vi= 275 m/sec

T1=280K

P2=85kpa

T2=300K

S1=0.2967kj/kg

Cp = 1.04 kalkg

S1=60 X 10³/0.2957x 10³x 280=0.73kg/m³

S2=P2/RT2=

85 x 10³/0.2967*10³*300

= 0. 9546 19/m³

h1+C1²/2000=h2 +C1²/2000

C2=184.45 SEC

S1A1C1=S2A2C2

A1/A2=0.88G

=0.8G

Atomic number 7 and the chemical symbol N belong to nitrogen. The lightest element in group 15, or the pnictogens, of the periodic table, nitrogen is a nonmetal. It is a typical element in the cosmos and is thought to be the seventh most abundant in the Milky Way and the Solar System. With an atomic number of 7, nitrogen is a chemical element. The chemical compound known as molecular nitrogen (N2) is made up of two tightly bound nitrogen atoms.

Learn more about Nitrogen here:

https://brainly.com/question/16711904

#SPJ4

Technician b is correct because the left rear brake drum is scored, but the right rear drum looks as good as new then both sides should be remachined to a similar diameter.

A brake drum is a revolving cylinder-shaped component that is friction-activated by a set of shoes or pads pressing outward against it. Drum brakes are brakes where shoes are pressed against the inner surface of the drum. Drum brakes are frequently used at the rear. Compared to disc brakes, these brakes have more parts and are more difficult to maintain, but they cost less to make and are simple to add an emergency braking mechanism. The front and rear brakes are standard equipment on all automobiles. Your car may have a "disc brake" system on all four wheels, a "drum brake" system on all four wheels, or a combination of the two. Typically, the front brakes of your car have a disc system, and the rear brakes have a drum system.

Learn more about brake drum here:

https://brainly.com/question/14937026

#SPJ4

The completed sentences with respect to carpentry tools are given as follows:

Because each instrument is precisely built for a specific function, selecting the appropriate tool will also reduce the amount of effort necessary to do a job correctly without causing harm to either the machinery or the material being worked on.

Many construction mishaps can be avoided by planning ahead of time.

Learn more about table saw:
https://brainly.com/question/28896152
#SPJ1

Both Technicians A and B are accurate when they say that disc brake rotors can be either hub-style or hubless-style.

With disc brakes, the brake pads attached to the brake callipers grip on the rotating braking rotors to stop or slow down the wheels. Friction is created by the brake pads pressing against the rotors, which turns kinetic energy into heat energy.

Although this thermal energy produces heat, it may be effectively dispersed since the primary components are exposed to the environment. This ability to dissipate heat lessens brake fade, a condition where heat affects how well a vehicle brakes. The resistance of disc brakes to water fade, which happens when water on the brakes considerably lowers braking force, is another benefit. The rotor spins rapidly as the car is moving, and this rotational motion discharges the water from the rotors themselves, resulting in stable braking force.

Learn more about Rotors here:

https://brainly.com/question/18650040

#SPJ4

The page numbers and offsets of the following address reference are 1663 and 6595 respectively.

Given,

Page size= 1 (*KB) = 2n = 1024 = 210

So, the value of bits of offest part is n = 10

a. 21205

Binary Format = 101001011010101

This binary address is split into 2 parts, first is page no. and other part is page offset

Page no. : 01010010 = 82 (in decimal)

Page offset : 11010101 = 213 (in decimal)

b. 164250

Binary Format = 00101000000110011010

Page no. : 0010100000 = 160 (in decimal)

Page offset : 0110011010 = 410 (in decimal)

c. 121357

Binary Format = 00011101101000001101

Page no. : 0001110110 = 118 (in decimal)

Page offset : 1000001101 =  525 (in decimal)

d. 16479315

Binary Format = 111110110111010001010011

Page no. :   111110110111 = 4023( in decimal)

Page offset : 010001010011 = 1107 (in decimal)

e. 27253187

Binary Format = 0001100111111101100111000011

Page no. :   00011001111111 = 1663(in decimal)

Page offset : 01100111000011 = 6595 ( in decimal)

To learn more about Binary, visit: https://brainly.com/question/14914277

#SPJ4

Two essential elements of effective teamwork that raise job satisfaction are open communication and mutual support.

To learn more about effective teamwork refer to:

https://brainly.com/question/3813692

#SPJ4

Using the knowledge in computational language in C++ it is possible to write a code that isconsecutivefour function in programming

​

#include <iostream>

using namespace std;

#include<vector>

bool isconsecutivefour( const vector<vector<int>> &values)

{

   int res=0;

   //checking if the vector has consecutive fours row-wise

   for(int i=0;i<values.size();i++)

   {

       for(int j=0;j<values[i].size()-3;j++)

       {

          //if a consecutive four is obtained

           if(values[i][j]==values[i][j+1] and values[i][j+1]==values[i][j+2] and values[i][j+2]==values[i][j+3])

           {

               res=1;

               break;

           }

       }// we break the outer loop if a consecutive four is found

        if(res==1){

       break;}

   }

   //if a consecutive four is obtained 1 is returned

   if(res==1)

   return 1;

       for(int i=0;i<values[0].size();i++)

       {

           int j;

           for( j=0;j<values.size()-3;j++)

           {

               //if a consecutive four is obtained

                if(values[j][i]==values[j+1][i] and values[j+1][i]==values[j+2][i] and values[j+2][i]==values[j+3][i])

                {

                    res=1;

                    break;

                }

           }// we break the outer loop if a consecutive four is found

           if(res==1){

           break;}

       }

   if(res==1)

   return 1;  //if a consecutive four is obtained 1 is returned

   else

   return 0;   //if a consecutive four is not obtained 0 is returned

}

int main() {

   int r,c;

   //input number of row

   cout<<"Enter row size : " ;

   cin>>r;

   cout<<endl;

   //input number of columns

   cout<<"Enter column size : ";

   cin>>c;

   cout<<endl;

    vector<vector<int>> values(r,vector<int>(c,0));

   cout<<"Enter the values :"<<endl;

               int x;

   for(int i=0;i<r;i++)

   {

       for(int j=0;j<c;j++)

       {

           cin>>x;

           values[i][j]=x;

       }

   }

   bool res;

    res=isconsecutivefour(values);

   if(res==1) // if a consecutive four is found

   cout<<"The array has consectutive fours"<<endl;

   else  //consecutive four is not found if 0 is returned

   cout<<"The array does  not have consectutive fours"<<endl;

See more about C++ at brainly.com/question/12975450

#SPJ1

The mercury in a manometer raises 13.5 millimeters due to a change in pressure the corresponding pressure is 0.0178 atm.

Manometer is defined as an instrument for measuring the pressure acting on a column of fluid that consists of a U-shaped liquid tube in which the liquid rises to various heights in the two arms due to different pressures acting in the two arms of the tube.

We know that

1 atm = 760 mmHg

So, X atm = 13.5 mmHg

X x 760 = 13.5 x 1

X = 13.5 / 760
X = 0.178 atm

Thus, the mercury in a manometer raises 13.5 millimeters due to a change in pressure the corresponding pressure is 0.0178 atm.

To learn more about manometer, refer to the link below:

https://brainly.com/question/15009345

#SPJ1

let p and g be respectively the parent and grand parent of x. p is the root. Make x the new root by rotating edge(x,p).The Zig_Zig case p is the left child of g and X is the right child of p,making g the new parent of x rotating edge(x,g).

To learn more about zig rotation refer to:

https://brainly.com/question/24522433

#SPJ4

Comments are added to each line of the following mips code and describe in a sentence.

#t0=sum=0 commont for first code

#t1=i=1

# (n<i)? or (i>n)?

# exit loop if (i>n)

# sum = sum + 1

# i = i + 2

# repeat loop

# result = sum

Result $v0 is the sum of the odd positive integers 1 + 3 + 5 + … which are less than or equal to n.

A comment in computer program is an explanation or annotation that can be read by programmers and is included in the source code of a computer program. They are added to the source code to make it simpler for humans to understand it, and compilers and interpreters typically ignore them.

Learn more about code here:

https://brainly.com/question/14461424

#SPJ4

Two cylindrical parts, AB and BC, make up the rod ABC. It is constructed of mild steel, which is assumed to be elastoplastic with E=200GPa and Y=250 megabytes MPa.

One of the steels has a 25C starting temperature. What the two kids gave us were models of the material's flexibility. We continue to receive 200 GB. The degree of services and linear expansion coefficients are the same for all four.

The boy from extra sigma concurs. 250 megabytes of data were shot out. We must ascertain the level of stress on field road. The street road is visible. All for P. Health minus P. L. is equivalent. We can express this as having all four delta T because both of the responses were acceptable. All four of the sigma are equal to delta T. He consented to us slipping the numbers so we could calculate the temperature rise. is a temporary power of six equal to 250.

To know more about megabytes click here:

https://brainly.com/question/2575232

#SPJ4

False. Commercial photographers attempt to produce images that will stand out and make a big impact on the public.

What is photographers?
A photographer often works as a freelancer, getting hired by different customers for specialised tasks. A client who hires a part-time or freelance photographer is expected to adhere to their every demand, as well as to put up a business strategy that makes options and price readily visible and understandable.

Photographers are in charge of the digital and physical development of their photos, as well as any or all editing that may be necessary. Simple cropping, adding/changing colours and shading, modifying sharpness and lighting, or deleting things to tidy up the image are all examples of editing techniques.

To learn more about photographers
https://brainly.com/question/28081565
#SPJ1

Appearing in a class other than Point2D, will correctly create an instance of a Point2D object is:

E Point2D p = new Point2D(3.0, 4.0);

What is Point2D?

The Point2D class is part of JavaFX. This class represents a two-dimensional point in space. The Point2D class represents a 2D point by its x and y coordinates. We can construct three Point2D objects named point2d 1, point2d 2, and point2d 3 by supplying their x and y coordinates as inputs. We use the getX() and getY() functions to obtain the x and y values, which we then display. We are also computing and displaying the distance of each point from the origin. We also show if two points are equal or not using the equals() method and the distance between two points using the distance() function.

To learn more about Point2D
https://brainly.com/question/3405843

#SPJ4

Fine grained of alkali igneous rocks cannot be used in cement because of the volume expansion caused by the Alkali-silica reaction, fine-grained igneous rocks cannot be used as aggregates in cement.

Extrusive igneous rocks have a fine-grained or aphanitic texture, with grains that are too small to see without a magnifying glass. The fine-grained texture suggests that the rapidly cooling lava did not have enough time to form large crystals. A petrographic microscope can be used to examine these tiny crystals.

The texture of an igneous rock (fine-grained vs coarse-grained) is determined by the rate at which the melt cools: slow cooling produces large crystals, while fast cooling produces small crystals.

The chemical reaction that occurs in both alkali cations and hydroxyl ions in the pore solution of hydrated cement paste and certain reactive silica phases present in concrete aggregates is known as the alkali-silica reaction (ASR).

Learn more about cement on:

https://brainly.com/question/14323034

#SPJ1

2((0+1)(0+1)*2+2)* is a regular expression that describes the language that it recognizes.

What is a regular expression?

A regular expression is a string of characters that specifies a text search pattern. String-searching algorithms typically use such patterns for "find" or "find and replace" operations on strings, as well as input validation. In theoretical computer science and formal language theory, regular expression techniques are developed.

SA=\epsilon (Eqaution 1)

SB=SB(0)+SB(1)+SB(2)  + SA(0) + SA(1) (Eqaution 2)

SC=SA(2)+SD(2)+SC(2) (Eqaution 3)

SD=SC(0+1) + SD(0+1) (Eqaution 4)

Using arden's expression on equation 5 we can write it as:

SD=SC(0+1)(0+1)* (Equation 5)

We need to find SC to get the regular expression as it is the final state.

We substitute equations into one another to get the answers.

Substituting Equation 1 to equation 3 we get:

SC=\epsilon(2) + SD(2) + SC(2)

SC = (2+SD(2)) + SC(2)

Substituting Equation 5 into it we get:

SC=2+SC(0+1)(0+1)*2+SC(2)

SC=2+SC((0+1)(0+1)*2+2)

Using arden's therorem we can write it as:

SC=2((0+1)(0+1)*2+2)*

Hence 2((0+1)(0+1)*2+2)* is the regular expression that this DFA recongnizes.

To learn more about regular expression
https://brainly.com/question/14469911

#SPJ4

With relatively little power given to the transformer and winding currents of the same size as during operation, a short-circuit test is performed to determine the transformer impedance and losses.

E1 = N1/N2 = E2=N1/N2 V2 = (2400/240) 240<° = 2400<0°V

N2 / N1 I 2 = 240 / 2400(4.85) = 0.485A

GC = P2 / E1 ² = 173 / (2400)² = 3.003 × (10 )-5 S.

YC = (N2 / N1  I2)/E1 = 0.485 /2400 = 2.021 × (10-)4S

BM = √Y²C - G²C = √(2.021 ×( 10)-4)² - (3.003 × (10)-5 )² = 1.998 × (10 )-4 S

YC = GC - JBM = 3.003 × (10) -5  - j1.998 × (10)-4 S

 = 2.021 × (10) -4 < -81.45°S.

To Learn more About short-circuit test  refer to:

https://brainly.com/question/27809868

#SPJ4

An operator or concept used in programming that evaluates or defines a relationship between two entities is known as a relational operator. Equalities and inequalities in numbers are among them.

To learn more about Relational operators refer to:

https://brainly.com/question/28039937

#SPJ4

Software testing is a step in the software development process. To tell stakeholders about the software's quality, an investigation is conducted against the product.

To learn more about Stakeholders refer to:

https://brainly.com/question/15532995

#SPJ4

It can be inferred from the above that "Neither Technician A nor B is correct" (Option D). Note that blending an undamaged vehicle panel is required when there is very minimal damage or dent to the panel. In this case, the technician utilizes filling, spraying, and polishing to hide the dent. This is standard practice and is not considered fooling the customer.

When repairing a minor dent in a panel, the "blend inside panel" approach is frequently utilized. Blending is a method used on a non-repaired, undamaged panel to eliminate color differences between a refinished panel and the existing paint on surrounding panels.

The most typical blending process seen on insurance quotes is on bumpers and doors. Insurers pay half the restore time and then approve full clear, significantly cutting refinishing time by an hour for each repair.

From a 320-grit completed mended area, the repaired area still has to be brought up to refinish requirements.

Not only has a part of the refinish time been wasted, but extra operations are required to restore the panel to its original, undamaged state. Most estimate P pages include refinishing timelines for fresh, undamaged panels, rather than those that require preparation.

Learn more about damaged panels:
https://brainly.com/question/13543219
#SPJ1

Answer:

Example problem

Explanation:

(a) The source rate can be calculated as the product of the picture sample size and number of pixel per sample size.

Given:

Picture sample size = 480 * 500. The number of pictures sent per second = 30.

Hence sample size = 480 * 500 * 30 = 7.2e6.

Since each pixel (sample) can take one of 32 values (voltage levels), hence it needs

l

o

g

2

32

=

l

o

g

2

2

5

=

5

∗

l

o

g

2

2

=

5

∗

1

=

5

bits/pixel (bits/sample).

The source rate R is (bps) = 7.26 * 5 = 36e6 bps.

The commands you must enter to make fa0/2 a member of VLAN2 on a catalyst 2950XL switch is int fastEthernet 0/2 and switchport access vlan 2

The display port-security connection fastethernet 0/2 command displays a connection in a secure manner, suggesting that it's been disabled due to security controls. In this situation, another device connected to port F0/2 is causing a violation by delivering a frame with such a destination MAC address apart from 0200.1111.1111. Rejoins connection variety design mode, allowing you can configure the very same variables on many channels at the same moment. To convert a port or a group of ports into accessible ports, just use the interface configuration entry VLAN command. A port in accessible mode has only one VLAN defined on the connection, and it is only able to carry traffic for one VLAN. On a Cisco IOS, this interface configuration accessible VLAN function creates a Layer 2 interface.

Learn more about fastethernet 0/2 and switchport access vlan 2 here: https://brainly.com/question/27874920

#SPJ4

Bromine and chlorine easily react with alkenes in addition reactions. This experiment involves brominating trans-stilbene with a 10% bromine dichloromethane solution. As a result, an addition reaction occurs, and 1,2-dibromo-1,2-diphenylethane is formed.

Step-by-step explanation:

stilbene + Br2  ---->  PRODUCT(dibromostilbine)

No of moles of stilbene = 0.55/180.25 = 0.00305 mole

limiting reagent = stilbene

so that,

No of moles of  PRODUCT = 0.00305 mole

massof product produced  = 0.00305*260.25  = 0.793 gram

Theoretical yield = 0.793 gram

dibromostilbine molarmass  = 260.25 g/mol

practical yield  = 0.68grams

percent yield  = practical yield /Theoretical yield *100

               = 0.68/0.793*100 = 85.75%

Trans-stilbene acts as a nucleophile, while bromine acts like an electrophile. As a result, the bromine reagent electrophilically adds to the nucleophilic double bond. The Br-Br bond becomes polarized, and the more positively charged Br atom is transferred to the alkene, resulting in the formation of a bromonium ion.

Bromine addition begins on one side of the double bond (either side is equally likely, but only one option is chosen) and is followed by bromide ion attack on bromonium ion (again, attack could occur by carbon because the ion is symmetric, but only one option drawn). As shown above, the end result is a trans dibromide.

To learn more about Experiment, visit: https://brainly.com/question/23095194

#SPJ4