What is the answer to question 4

Answer:

Frequency = 1,550Hz

Explanation:

To solve this we can use the equation: [tex]f=\frac{v}{\lambda}[/tex]

(frequency = velocity/wavelength).

We are given the information that the wavelength is 22cm and the speed is 340m/s. The first step is to make sure everything is in the correct units (SI units), and to convert them if needed. The SI Units for velocity and wavelength are m/s and m respectively. This means we need to convert 22cm into meters, which we can do by dividing by 100, (as there are 100cm in a meter). 22/100 = 0.22m

Now we can substitute these values into the formula and calculate to solve:

[tex]f=\frac{340}{0.22} \\\\f=1545.454...[/tex]

Simplify to 3 significant figures:

f = 1,550Hz

(Which I believe is just below a G6 if you were interested)

Hope this helped!

Answer:

B

Explanation:

Answer:

B

Explanation:

Answer:

Explanation:

cross sectional area A = 40 cm² = 40 x 10⁻⁴ m² , n = 40 , Magnetic field B = 2 T . Current = I .

Maximum torque = 2 x 10⁻⁶ Nm

Value of maximum torque = n B A I .

n B A I = 2 x 10⁻⁶ Nm

40 x 2 x 40 x 10⁻⁴  I =  2 x 10⁻⁶ Nm

.32 I  = 2 x 10⁻⁶ Nm

I = 2  x 10⁻⁶ / 32 x 10⁻²

= .0625 x 10⁻⁴

= 6.25 x 10⁻⁶

= 6.25 μ A .

b )

Work done in rotating a coil = n B A I ( cos θ₂ - cosθ₁ )

= n B A I ( cos θ₂ - cosθ₁ )

= 2 x 10⁻⁶ ( cos 180 - cos θ )

= 2 x 10⁻⁶ ( -1  - cos θ )

= - 2 x 10⁻⁶ ( 1  + cos θ ) J .

Answer:

Breathing is the biological process of inhaling and exhaling of the gases between the cells and the environment. The mechanism of breathing involves various respiratory structures such as the windpipe, lungs and nose. Respiration, on the other hand, is a chemical process that takes place in the cell.

Explanation:

Answer:

To pinpoint specific locations on Earth

Explanation:

The satellite has a full specific view of a specific area just like other satellites do. Satellites communicate together which also communicates with your GPS to give you an accurate location where you are or where you want to be. That is how satellites are used in GPS.

Hope this helps you out :)

Answer:

A. like charges repel, unlike charges, attract

Explanation:

A charge can be positive or negative.

Like charges, example positive and positive or negative and negative, repel each other, while unlike charges, example positive and negative attract each other.

From the given options, the correct option is A.

A. like charges repel, unlike charges, attract

The statement which is true for the interaction of charges is the like charges repel, unlike charges, attract (A).

When the two charges or the charged bodies interact each other, the force of attraction or repulsion acts between them. This force of attraction or repulsion can be find out using the coulombs' law.

This force of attraction or repulsion is identified by the sign of the particular charge. According to the property of interacting charges-

Thus, the statement which is true for the interaction of charges is the like charges repel, unlike charges, attract (A).

Learn more about the property of interacting charges here;

https://brainly.com/question/12455287

Answer:

the force of the friction is A-0.52

Answer:

the following variables

Answer:

A quick return motion mechanism is used in the shaper and slotter machine in which the circular motion is converted into reciprocating motion so that the slider moves forward and backwards. In the forward direction, the cutting process occurs while in return there is no such cutting.

Answer:

The wavelength will be "1.182 μm".

Explanation:

The given values are:

Wavelength

[tex]\lambda=591 \ nm[/tex]

or,

  [tex]=591\times 10^-9 \ m[/tex]

Distance,

[tex]d = 3.00 m[/tex]

[tex]n = 1[/tex]

Distance of fringe from center,

[tex]y = 4.84 \ mm[/tex]

We have to find the wavelength of first order dark fringe,

[tex]\lambda = ?[/tex]

As we know,

⇒ [tex]y_{bright} =\frac{1\times \lambda\times L}{d}[/tex]

On putting the given values in the formula, we get

   [tex]0.00484=\frac{1\times (591\times 10^{-9})\times 3}{d}[/tex]          

On applying the cross multiplication, we get

   [tex]\lambda = \frac{0.00484\times 000036632}{0.5\times 3}[/tex]

      [tex]=1182\times 10^{-9}[/tex]

or,

      [tex]=1.182 \ \mu m[/tex]    

Answer:

density =mass

volume

x = 39.5 ÷ 5.0

x =7.9

Answer:

7.9 g/cm3

Explanation:

Density = mass / volume

Density = 39.5 / 5.0

Density = 7.9 g/cm^3

Therefore, density is [tex]7.9 g/cm^{3}[/tex]

Answer:

To determine the minimum blade length, add 1" to the workpiece thickness. One type of material, and some materials can be cut by more than one type of blade. No matter the material, there's likely a jigsaw blade designed specifically for. Armed with the right blade, follow these pointers to make your work go (and cut) .

Explanation:

Answer:

[tex]n=1.56\times 10^{17}[/tex] electrons

Explanation:

Given that,

Total charge = 9 mC = 0.009 C

0.009 C of charge passes through a wire in 3.6 s.

Let q' is the charge that passes through it in 10 s.

So,

[tex]\dfrac{0.009 }{3.6}=\dfrac{q'}{10}\\\\q'=\dfrac{0.009 \times 10}{3.6}\\\\q'=0.025\ C[/tex]

We know that,

q = ne

Where

n is the number of electrons

So,

[tex]n=\dfrac{q}{e}\\\\n=\dfrac{0.025}{1.6\times 10^{-19}}\\\\n=1.56\times 10^{17}[/tex]

So, [tex]1.56\times 10^{17}[/tex]electrons must pass through the cross-sectional area.

Answer:

1) 392 joules

2) 625,000 joules

3) 156,800 joules

Explanation:

Gravitational potential energy = mgh. m = mass in kg, g = acceleration due to gravity and h = height in meters.

Kinetic energy = 1/2(m)(v)^2, m = mass in kg, v = velocity in meters per second

1) P.E = 2 x 9.8 x 20 = 392 joules

2) K.E = 1/2 x 2000 x (25)^2 = 625,000 joules

3) P.E = 80 x 9.8 x 200 = 156,800 joules

Answer:

[tex]1)\:392\:\text{J}\:(400\:\text{J with one significant figure)},\\2)\:625,000\:\text{J}\:(600,000\:\text{J with one significant figure)},\\3)\:156,800\:\text{J}\:(200,000\:\text{J with one significant figure)},[/tex]

Explanation:

1. The potential energy of an object is given by [tex]PE=mgh[/tex]. Substituting given values, we have:

[tex]PE=2\cdot 9.8\cdot 20=\boxed{392\:\text{J}}[/tex]

2. The kinetic energy of an object is given by [tex]KE=\frac{1}{2}mv^2[/tex]. Substituting given values, we have:

[tex]KE=\frac{1}{2}\cdot 2000\cdot 25^2 =\boxed{625,000\: \text{J}}[/tex]

3. 1. The potential energy of an object is given by [tex]PE=mgh[/tex]. Substituting given values, we have:

[tex]PE=80\cdot 9.8\cdot 200=\boxed{156,800\:\text{J}}[/tex]

Explanation:

a) It will weigh less because of its distance from the block.

b) torque = W1×d1 = (10N)(0.25m) = 2.5 N-m

c) torque = W2×d2 = W2×(0.50m)

d) W2×d2 = W1×d1

W2 = (d1/d2)W1

= 5 N

Answer:

If it has more electrons than protons it has a net negative charge and is known as an anion.

Answer:

5.88 Nm

Explanation:

Applying,

Moment(M) = Force(F)×perpendicular distance(d)

M = F×d.................... Equation 1

But,

F = mg.................. Equation 2

Where m = mass, g = acceleration due to gravity.

Substitute equation 2 into equation 1

M = mgd................. Equation 3

From the question,

Given: m = 3 kg, d = 20 cm = 0.2 m

Constant: g = 9.8 m/s²

Substitute these values into equation 3

M = 3×0.2×9.8

M = 5.88 Nm

Answer:

ΔT = 4.058 10²⁰ [tex]\frac{S_o^2}{r^2 \ c_e}[/tex]

Explanation:

In this experiment the system can be approximated as a tube with one end open and the other closed.

The open end is where the ultrasound emitter is and the closed end where the limit between the tissue and the bone is, the length of the tube is L = 0.55 cm = 5.5 10⁻³ m

a node is formed at the closed end and a belly at the open end, so the resonance has the form

             λ = 4L                    1st harmonic

             λ = 4/3 L                third harmonic

             λ = 4/5 L                fifth harmonic

             λ = 4L / (2n + 1)     n = 0, 1, 2, (2n + 1)

This wave is a standing wave therefore energy density remains in place

                P = 1/2 ρ v (w S₀)²

angular velocity is related to frequency

               w = 2π f

we substitute

                E = P = 2π² ρ v f² S₀²

if this energy per unit area is transformed into heat

                E = m c_e DT

let's use the concept of density

                ρ = m / V

                m = ρ V

if there are no losses in the system

       ½ π² ρ v f² S₀² = ρ V c_e ΔT

       ΔT = [tex]\frac{\pi ^2 \ v \f^2 S_o^2}{2V \ c_e}[/tex]

When analyzing this expression the temperature increase is

* quadratic at the frequency and maximum amplitude of the wave

* proportional to the speed of the wave in the tissue

* inversely proportional to tissue volume

we can approximate the volume of the tissue to the volume of a cylinder tube

            V = π r² L

           ΔT = [tex]\frac{\pi \ v \ f^2 S_o^2 }{r^2 \ L \ c_e}[/tex]

we calculate

            ΔT = π 1450 (0.7 10⁶)² S₀² /( r² 5.5 10-3 c_e)

            ΔT = 4.058 10²⁰ [tex]\frac{S_o^2}{r^2 \ c_e}[/tex]

Answer:

The net torque will be "1366.33 Nm".

Explanation:

The given values are:

Length of ladder,

[tex]\tau_{242N} = 9.83 \ m[/tex]

then,

[tex]\tau=4.92[/tex]

Mass,

= 20.3 kg

Now,

The net torque will be:

⇒  [tex]\tau_{net}=\tau_{mg}+\tau_{242}[/tex]

On putting the given values, we get

⇒         [tex]=4.92\times (-mg)+9.83\times (+242)[/tex]

⇒         [tex]=4.92\times (-21\times 9.8)+9.83\times 242[/tex]

⇒         [tex]=-1012.53+2378.86[/tex]

⇒         [tex]=1366.33 \ Nm[/tex]

Answer:

..In a distance-time graph, the slope or gradient of the line is equal to the speed of the object. The steeper the line (and the greater the gradient) the faster the object is moving. Calculate the speed of the object represented by the green line in the graph, from 0 to 3 s.

d) steeper

D)Today

Answer:

7 × 10^-1

Explanation:

Hope this helps :) mark branliest if you could!

Answer: Therefore, the scientific notation is [tex]7 *10 {}^{ - 1}[/tex]

To solve a scientific notation you must count how many zeros they have, this always starts from the first 0, in some cases you always start by putting any number but that is not 0 at the beginning, these exercises are no longer negative scientific notations, if not they are positive.

[tex]8840 = 8.84 \times 10 {}^{3} [/tex]

Always to write a positive exercise you should always take the following:

And finally, the leading and trailing zeros of the coefficient are eliminated.

So, Therefore, The result of the scientific notation of the problem is [tex]7 *10 {}^{ - 1}[/tex]

You can see more about scientific notation in: https://brainly.com/question/17947470

The spinning would slow down. I've done this so many times and I know when you put your arms out you slow down. Half the time thats a good thing because if you go too fast you end up on the floor. I dont know the answer but id say its B or E

Tell me if I'm wrong

Answer:

The depth of the diver is 28.01 m

Explanation:

Given;

density of the seawater, ρ = 1,015 kg/m³

standard sea level pressure, P₀ = 1.0 atm = 101,325 Pa

the final reading of her pressure, P₁ = 3.75 atm = 379968.75 Pa

acceleration due to gravity, g = 9.8 m/s²

Let the depth she was diving at the final pressure = h

This depth is calculated as;

P₁ = P₀  +  ρgh

P₁ - P₀ =  ρgh

[tex]h = \frac{ P_1 \ - \ P_o}{\rho g} = \frac{379968.75 \ - \ 101325}{1015 \ \times \ 9.8} = 28.01 \ m[/tex]

Therefore, the depth of the diver is 28.01 m

The total momentum of the block and putty prior to their collision is

(0.454 kg) (0 m/s) + (5.70 × 10⁻² kg) (8.99 m/s) ≈ 0.512 kg•m/s

and the total momentum after the collision is

(0.454 kg) v + (5.70 × 10⁻² kg) (-8.99 m/s)

where v is the velocity of the block. Momentum is conserved, so

(0.454 kg) v + (5.70 × 10⁻² kg) (-8.99 m/s) = 0.512 kg•m/s

==>   v ≈ 2.26 m/s

The total work done on the block by the spring as it gets compressed by a distance x is equal to the change in the block's kinetic energy:

1/2 (25.0 N/m) x ² = 1/2 (0.454 kg) (2.26 m/s) - 0

==>   x ≈ 0.202 m ≈ 20.2 cm

Answer:

a. Red and Orange

b. Yes, they are

Explanation:

a. This is because, since the yellow light is reflected back into the water, it undergoes total internal reflection and its wavelength in water is not long enough to allow it penetrate the water surface. Since the wavelength decreases from left to right, both the green and blue light have shorter wavelength than the yellow light, so they get reflected back. The red and orange lights are more likely to penetrate since they have longer wavelengths than the yellow light.

b. This is because the red and orange light have longer wavelengths and are thus more likely to penetrate the water surface and not get reflected back.

Answer:

B

Explanation:

Answer:

Explanation:

a

Answer:

yea im sorry

Explanation:

first is gamma Ray's, last is d