The density of the lead chess piece with the mass of 51.4 and 55 ml is 0.93 g/cm³, since 1 ml = 1 cm³.
What is density?Density of a substance is the ratio of its mass by volume it is the measure of how much denser it is in a particular volume. The ratio of the density of an object to the density of water is called specific gravity.
Given that the volume of the chess piece is 55 ml or 55 cm³ and mass is 51.4 g. Hence density can be find out as follows:
Density = mass/ volume
= 51.4 g/55 cm³
= 0.93 g/cm³
Hence, density of the lead chess piece is 0.93 g/cm³.
To find more on density, refer here:
https://brainly.com/question/15164682
#SPJ1
Your question is incomplete. But your complete question probably was:
What is the density of a lead chess piece with a mass of 51.4 and 55 ml in volume?
choose the correct chemical formulas for the reactants and the products. the (base hydrolysis) reaction of a fluoride ion in water is:
The correct chemical formulas are as follows -
Reactant - [tex] H_{2}O [/tex] (aq) and F(-) (l)
Product - HF (aq) and OH(-) (aq)
The complete chemical reaction is as follows -
[tex] H_{2}O [/tex] + [tex] {F}^{ - } [/tex] --> HF + [tex] {OH}^{ - } [/tex].
In this chemically balanced reaction, [tex] H_{2}O [/tex] is water, [tex] {F}^{ - } [/tex] is fluorine ion, HF is hydrogen fluoride and [tex] {OH}^{ - } [/tex] is hydroxyl ion. Also mentioned in answer, the abbreviation aq indicates aqueous and l indicates liquid.
In the mentioned reaction, fluoride ion acts as weak Bronsted-Lowry Base. It means that fluorine ion accepts the hydrogen ion, which is evident by the formation of hydrogen fluoride. The hydroxyl ion formed in the reaction imparts basic character.
Learn more about hydrolysis -
https://brainly.com/question/8740481
#SPJ4
The complete question is attached in the figure.
If 1 egg and 1/3 cup of oil are needed for each bag of brownie mix, how many bags of brownie mix do you need if you want to use up all 3 eggs and 1 cup of oil?
The amount of brownie mix bags needed to use up 3 eggs and 1 cup of oil is 3, option C.
What is the basic stoichiometry for this problem?1 egg and 1/3 cup of oil is needed for a brownie mix bag
Therefore the brownie mix bags needed to consume 3 eggs and a cup of oil is equal to;
1 egg and 1/3 cup = 1 brownie mix bag
3 eggs and 1 cup = ?
Cross multiplied;
3/1 x 1 = 3
For one cup of oil and 3 eggs to be used up, it requires 3 bags of brownie mix.
The complete question is:
If 1 egg and 1/3 cup of oil are needed for each bag of brownie mix, how many bags of brownie mix do you need if you want to use up all 3 eggs and 1 cup of oil?
a. 1
b. 2
c. 3
d. 4
Learn more on stoichiometry here: https://brainly.com/question/16060223
#SPJ1
below is the lewis structure of the nitrogen molecule. count the number of bonding pairs and the number of lone pairs around the right nitrogen atom in this molecule.
The number of bonding pairs is equal to 3 and the number of lone pairs is 1.
Each atom shares an electron when two atoms join together to create a bond. The electrons involved in this relationship are referred to as the bond pairs of electrons. A lone pair, also known as an unshared pair or a non-bonding pair, is a pair of valence electrons that are not shared with another atom in a covalent bond. Atoms' outermost electron shell contains lone pairs.
Each nitrogen atom in N₂ has three bonding pairs and one lone pair.
Formal charge = Number of Valence Electrons - Number of Lone Electron Pairs - (Number of Bonded Electron Pairs/2) = 5 - 2 - (6/2) = 0
Therefore, each nitrogen atom in N₂ has a formal charge of zero.
The complete question is attached as an image as the question given is incomplete.
Want to learn more about lewis structure visit;
https://brainly.com/question/20300458
#SPJ4
a cylinder with a moveable piston contains 92g of nitrogen. the external pressure is constant at 1.00 atm. the initial temperature is 200k. when the temperature is increased by 92 k, by taking it out of the freezer, the volume will increase, according to the ideal gas law. calculate the work for this process.
The work for the compression process is 3719.3 J.
What is ideal gas law ?
The ideal gas is the virtual gas that chemists and students dream of because it would be much simpler if there weren't some kind of intermolecular force that would complicate the simple law of the ideal gas. An ideal gas is essentially a point cloud moving with constant random linear motion. Its behavior is described by the assumptions described in the kinetic molecular theory of gases. This ideal gas definition contrasts with the non-ideal gas definition. This is because this equation describes how gases actually behave. First, let us consider the ideal gas. The ideal gas law is simply a combination of all the simple gas laws (Boyle's law, Charles' law, Avogadro's law), and if you learn this law, you've learned them all. . The simple gas law can always be derived from the ideal gas equation.
To know more about ideal gas law , click the given link ;
https://brainly.com/question/24172157
#SPJ4
2.28 explain the concept of effective nuclear charge and how it affects atomic radii and ionization energies.
As the effective nuclear charge of an atom increases the atomic radii decreases and the ionization energy increases.
Effective nuclear charge is the net positive charge experienced by an single electron in an multi electron atom. The term “effective” is used because of the shielding effect of negatively charged electrons that prevents higher orbital electrons from experiencing the full nuclear charge.
So keeping this concept in mind we can say that as the effective nuclear charge on any atom increases the atomic radii or the size of the atom decreases. This is because as the the effective nuclear charge increases the electrons that are present in the orbit are pulled closer to the nucleus, so if the effective nuclear charge is more then the electrons are pulled more towards the nucleus and therefore the size or rhe atomic radii decreases
Now if we talk about the ionization energies, ionization energy is the energy required to remove the outer most electron from the orbit to form the ion. So if the effective nuclear charge is more for an atom then obviously the size of the atom would be less and because of this it will be difficult to remove the outermost electron as it is strongly attracted towards the nucleus. Hence the ionization energy will be more.
To know more about effective nuclear charge
https://brainly.com/question/2321621
#SPJ4
If carbon dioxide is removed from a plant’s environment, what would you expect to happen to the plant’s production of carbohydrates?.
The plant’s production of carbohydrates stops producing high-energy sugars altogether.
When carbon dioxide is completely removed from a plant's environment it is expected that the plant will stop producing energy-rich sugars altogether.CO2 is required for plants to photosynthesize. So without CO2, plants have no way to make energy. In this scenario, it will probably wither.
Carbon dioxide is an important greenhouse gas and helps trap heat in the atmosphere. Without them, our planet would be uninhabitable and cold. Plant photosynthesis produces oxygen and carbohydrates in a strict ratio, so we run out of oxygen as soon as we eat. But lethal levels of carbon dioxide will be reached long before these things happen.
Learn more about Carbon dioxide here:-https://brainly.com/question/25385913
#SPJ4
the arrangement of electrons in an atom of an element determines the chemical properties of that element. Our present day understanding of how electrons are arranged in an atom is the result of all of these scientific contributions except
The result of all of these scientific contributions except Rutherford's gold foil experiment proved the existence of the nucleus.
The valence electrons mainly determine the chemical houses of the elements. The elements inside the equal group have comparable chemical homes because they have identical valence shell electron configurations. The electrons in the power degrees with the highest range are in common the farthest from the nucleus.
Because variations in electrons placed inside the outermost stage distinguish an atom from its nearest noble fuel these are the electrons accountable for the atom's chemical conduct. Electrons located inside the outermost shell of the electron cloud are called valence electrons and feature the best power. Valence electrons determine the chemical homes of an element or how the valence electrons of 1 element are shared or traded with valence electrons of other elements to create new molecules.
Learn more about Electrons here:-https://brainly.com/question/860094
#SPJ4
a student seperated 51.4g of lawn sand into sharp sand and ammonium sulfate after seperation the total mass of the two products was 52.6g suggest a reason for the diffference in mass
The only possible reason for the difference in mass is if there is an error during weighing.
Law of conservation of massAccording to the law of conservation mass, masses cannot be destroyed, and neither can they be created. They can, however, change forms during the course of a process or reaction.
Going by this law, if the combined weight of the lawn sand and the ammonium sulfate is 51.4 grams, after separation, the addition of weights of the resulting sharp sand and that of the ammonium sulfate should equate to 51.4 grams.
But that is not the case here. The addition of their weights resulted in 52.6 grams. This means that something is not right somewhere.
It could be that the weight of the mixture was underestimated by error.It could be that the individual weight of the sharp sand and or the ammonium sulfate were underestimated due to error.Beyond these two reasons, the source of error could also be that the total mass of the two products was overestimated by error.
More on the law of conservation of mass can be found here: https://brainly.com/question/28711001
#SPJ1
g when zn reacts with hcl solution, the products are h2 gas and zncl2: how many moles of h2 gas were produced in the reaction?
1 mol of H2 gas were produced in the reaction
Zn + 2HCl --> ZnCl2 + H2
This is a single displacement reaction
What is a single displacement reaction?
It is a kind of oxidation-reduction chemical reaction when an ion or element moves out of a compound, i.e., one element is replaced by the other in a compound.
What is mole ratio?
It is the ratio between amounts in moles of any two compounds involved in a balanced chemical reaction.
As we can see mole ratio from the coefficient of balanced reaction:
2 moles of HCl produces 1 mole of H2 gas
Learn more about displacement reaction at - Brainly.com https://brainly.com/question/20690229
#SPJ4
Does it matter what kind of compound you have (ionic/covalent) when you're drawing Lewis Structures? Why or why not?
Yes, because Ionic compounds only have single bonds, but Covalent compounds can have double and triple bonds.
No, there is no difference between Ionic and Covalent bonds.
No, because there is no way to tell the difference between Ionic and Covalent bonds.
Yes, because Covalent compounds have bonds and Ionic compounds don't, and that needs to be represented in the drawing.
Yes, because Ionic compounds only have single bonds, but Covalent compounds can have double and triple bonds.
What is the Lewis structure of ionic and covalent bonds?In Ionic compounds, the Lewis Dot Structure shows how the electrons are being transferred to form ions in the compound. In covalent compounds, the Lewis Dot Structures must show how the electrons are being shared to complete the outermost shell of each atom in the molecule. In Lewis electron structures, we can see bonding pairs, which are shared by two atoms as well as lone pairs which are not shared between two atoms. If both electrons come from the same atom in a covalent bond, the bond is known as a coordinate covalent bond.
So we can conclude that option A is the right answer.
Learn more about Lewis's structure here: https://brainly.com/question/20300458
#SPJ1
If you made a voltaic cell out of this reaction, what half-reaction would be occurring at the cathode, and what half-reaction would be occurring at the anode?.
An (aq) + 1 e⁻ → A⁻(aq) at the cathode and B(aq) → B⁺(aq) + 1e⁻ at the anode.
Oxidation is lost at the anode consequently, the oxidation 1/2-response happens in the 1/2-cellular containing the anode. discount is received at the cathode so the reduction half-response takes place in the 1/2-mobile containing the cathode. the only one with the highest discount potential might be what you need to pick out because the reduction 1/2-response and therefore be your cathode.
The one with the lowest reduction potential will be what you want to select as the oxidation-1/2 response and consequently be your anode. The response at the anode is oxidation and that on the cathode is discount. right here, the anode is superb and the cathode is the terrible electrode. The anode is the electrode where electricity moves into. The cathode is the electrode in which power is given out or flows out. The anode is typically the effective aspect. A cathode is a poor side.
Learn more about A voltaic cell here:-https://brainly.com/question/3930479
#SPJ4
a certain substance has a heat of vaporization of 71.77 kj/mol. at what kelvin temperature will the vapor pressure be 4.50 times higher than it was at 301 k?
At 318 kelvin temperature will the vapor pressure be 4.50 times higher than it was at 301k.
Given : [tex]P_{1}=p_{1},P_{2}=4.50p_{1},T_{1}=301k,H=71.77kj/mol[/tex]
Substituting in the given equation:
[tex]ln(4.50p_{1}/p_{1})=71.77*1000/8.314(1/301-1/T_{2})[/tex]
[tex]1.50=8632(1/301-1/T_{2})[/tex]
[tex]1.50=28.67-8632/T_{2}[/tex]
[tex]T_{2}=8632/21.17[/tex][tex]T_{2}=317K[/tex]
State Clausius-Clapeyron theorem.
The Clausius-Clapeyron relation describes the relationship between pressure and temperature at a non - continuous phase bridge between the two phases of matter of the a single constituent, with vapour pressure playing a key role.
State Clausius-Clapeyron equation
[tex]ln(p2/p1)=H/R(1/T_{1}-1/T_{2})[/tex]
P1 and P2 are the vapor pressures at temperatures T1 and T2H= the enthalpy of vaporization of the liquidR = the Universal Gas ConstantThus, at 318K temperature, the vapor pressure is 4.50 higher times than it was at 301K.
To know more about Clausius Clapeyron theorem:
https://brainly.com/question/21504082
#SPJ4
Please answer for award
The density of the penny is 2g/mol
Density is a measure of how compact the mass in a substance or object is
Here given data is
Mass of penny = 3gram
Volume of penny = 31.5 ml after penny was dropped
Volume of penny = 30 ml before penny was dropped
We have to calculate the density of penny = ?
Volume of penny = 31.5 - 30ml = 1.5ml
So density = mass/volume
Density = 3gram/1.5ml
Density = 2g/mol
Know more about penny
https://brainly.com/question/1405443
#SPJ1
How many of the following molecules have sp2 hybridization on the central atom? hcn so2 ocl2 xecl2.
Only one molecule have sp2 hybridization on central atom and that is SO₂.
XeCl₂ have sp3d hybridization.
OCl₂ have sp3 hybridization.
HCN have sp hybridization.
Hybridization is defined as the concept of mixing two atomic orbitals to give rise to a new type of hybridized orbitals.
Hybridization intermixing usually results in the formation of hybrid orbitals having entirely different energies, shapes, etc.
Learn more about hybridization here:- https://brainly.com/question/22765530
#SPJ4
What is a biosphere
Answer:
The Biosphere is the part of the earth where life exists.
Biosphere is all organisms on Earth for example plants animals and microoganisms.
Explanation:
I NEED HELP WITH THIS WHOLE PAGE
1) The endocrine glands pictured above are:
Thyroid Gland and Parathyroid glandAdrenal GrandOvariesPancreatic GrandPitutuary GlandPineal Gland.2) Organs of the endocrine system are often called glands. An organ is responsible for the production of one or more substances such as hormones, digestive juices, perspiration, tears, saliva, or milk.
The compounds are released directly into the circulation by the endocrine glands. The compounds are released by exocrine glands into a duct or aperture to the interior or outside of the body.
3) Pituitary Gland produces the following hormones:
Adrenocorticotropic hormone Follicle-stimulating hormoneGrowth hormone (GH)Luteinizing hormone (LH) etc.What is the importance of the Endocrine system?The endocrine system regulates juvenile growth and development, adult body processes, and the reproductive process. All of the body's key activities and processes are controlled and regulated by the endocrine system: Energy management. Reproduction.
The pituitary gland, for example, is located at the base of the brain and is no larger than a pea. Despite its tiny size, the pituitary gland is sometimes referred to as the "master gland." Many other endocrine glands are controlled by the hormones it produces.
Learn more about glands:
https://brainly.com/question/4133041?
#SPJ1
IXL question on velocity and distance i need answer asap
The velocity of Bridgette is 50 kilometers per hour to the east.
What is the velocity of an object?The velocity of an object is the speed that the object is moving in a specified direction.
Velocity is defined as the ratio of the displacement of an object and the time taken.
The displacement of a body is the distance traveled by that body in a specific direction.
Velocity is a vector quantity.
Mathematically;
Velocity = displacement / time
Considering the given question:
Bridgette drove her car 30 kilometers east at a constant velocity; hence, her displacement is 30 Kilometers east.
It took her 0.6 hours to drive that distance; hence, the time take = 0.6 hours.
Velocity = 30 kilometers / 0.6 hours
Velocity = 50 kilometers per hour to the east
Learn more about velocity at: https://brainly.com/question/24739297
#SPJ1
Engineers are evaluating a halogen bulb as a possible solution to lighting a
reading workspace. What criteria might they consider?
Answer:
Factor # 1. Illumination Level: ...
Factor # 2. Uniformity of Illumination: ...
Factor # 3. Colour of Light: ...
Factor # 4. Shadows: ...
Factor # 5. Glare: ...
Factor # 6. Mounting Height: ...
Factor # 7. Spacing of Luminaries: ...
Explanation:
Halogen bulbs are used in working spaces and motor vehicles. To evaluate the working of halogen bulbs engineers has check the gas pressure inside, voltage, weight , life time etc.
What are halogen bulbs?Halogen bulbs are light sources made by halogen gas filled inside. The halogen gas combines with the tungsten vapor inside. Halogen bulbs are efficient in comparison with incandescent bulbs.
Halogen bulbs has higher life time, small and relatively lite weight. Halogen bulbs produces bright white light which is better than the yellowish light of incandescent lights.
The chemical reaction of the halogen cycle is produced when halogen gas and tungsten filament are combined. This reaction can prolong the life and preserve the purity of the bulb.
To evaluate the performance of halogen bulbs, engineers have to check the gas pressures, life time and heat energy released.
To find more on halogen bulbs, refer here:
https://brainly.com/question/4504033
#SPJ2
several possibilities have been suggested for the support of life on titan, including methane rivers and lakes, and the possible presence of subsurface, liquid water aquifers. if life were present in these two different liquid reservoirs, what might be the key differences between them, and why?
In addition to rivers and oceans, Titan appears to feature lakes of liquefied ethane and methane, which some scientific studies hypothesize could support fictitious non-water-based life.
What are the key differences between these two liquid reservoirs if life were present in them?Titan's atmosphere is primarily composed of nitrogen, just like Earth's, but it has a surface pressure that is 50% higher. Titan’s rivers, lakes and seas of liquid methane and ethane might serve as a habitable environment on the moon’s surface, though any life there would likely be very different from Earth’s life.It is probable that there is a coat of liquid water underneath its ice shell in addition to the small and big masses of liquid methane & ethane that are present on the surface. According to some scientists, these liquid mixtures could offer prebiotic biochemistry for living cells that are different from those seen on Earth.To know more about life on Titan, visit:
https://brainly.com/question/12526162
#SPJ4
Aniline, is a weak base with kb of 7. 4 × 10-10. Which indicator would be the most appropriate to titrate an aqueous solution of aniline?.
The most appropriate indicator for titrating aqueous aniline solutions is methyl red with a pH of 5.87.
Aniline (a weak base) when titrated with a strong acid will neutralize at a pH of less than 7.
The reaction will be
B + H⁺ → BH⁺ + Cl⁻
BH+ will hydrolyze as:
BH⁺+ H₂O ⇄ B + H₃O⁺
Ka conjugate acid aniline = 10⁻¹⁴/7.4 x 10⁻¹⁰ = 1.35 x 10⁻⁵
pKa = 4.87
Probable pH at the equivalence point = 4.87 + 1.00 = 5.87
The most appropriate indicator is methyl red with a pH equivalent point of 5–6.
Learn more about titration of a weak base with strong acid at https://brainly.com/question/13031875
#SPJ4
What volume (in liters, at 298 K and 6.09 atm) of chlorine gas is required to react with 7.44 g of P?
The volume (in litres at 298 K and 6.09 atm) of chlorine gas, Cl₂, that is required to react with 7.44 g of P is 2.41 L
How do I determine the volume of chlorine gas, Cl₂?To determine the volume of the chlorine gas that will react with 7.44 g of P, we shall begin by obtaining the mole of the chlorine gas, Cl₂ that reacted. This can be obtained as follow:
Mass of P = 7.44 gMolar mass of P = 31 g/molMole of P = mass / molar mass = 7.44 / 31 = 0.24 mole2P + 5Cl₂ → 2PCl₅
From the balanced equation above,
2 moles of P reacted with 5 moles of Cl₂
Therefore,
0.24 moles of P will react with = (0.24 × 5) / 2 = 0.6 mole of Cl₂
Haven obtain the mole of chlorine gas, Cl₂, we shall determine the volume of the chlorine gas, Cl₂, required by using the ideal gas equation. This is shown below
Number of mole of Cl₂ (n) = 0.6 moleTemperature (T) = 298 KPressure (P) = 6.09 atm Gas constant (R) = 0.0821 atm.L/Kmol Volume of chlorine gas (V) =?PV = nRT
6.09 × V = 0.6 × 0.0821 × 299
Divide both sides by 6.09
V = (0.6 × 0.0821 × 299) / 6.09
V = 2.41 L
Thus, the volume of chlorine gas required is 2.41 L
Learn more about volume:
https://brainly.com/question/8476909
#SPJ1
Describe the properties of common alloys (carbon steel, bronze, brass, and sterling silver) and how their properties are different than their parts.
The properties of common alloys include the following:
High melting pointGood conductors of heat and electricity.Corrosive resistant.What is an Alloy?This is referred to as a type of substance which is composed of two or more elements. It comprises of at least a metal and is of various types which include bronze which is made up of copper and tin and brass which is made up of copper and zinc.
Most alloys are corrosive resistant because they aren't easily oxidized when exposed to aerobic conditions. They are also good conductors of heat and electricity due to their high degree of hardness and toughness which makes them tightly packed together thereby favoring flow of electrons and is the reason why they are different from their parts and is therefore the correct choice.
Read more about Alloy here brainly.com/question/16935193
#SPJ1
Help ASAP the question is in the picture
Answer:
1. Pharynx
2. Larnyx
3. Mouth
4. Trachea
5. Lungs
6. Diaphragm
7. Bronchi
8. Alveoli
9. Nasal Cavity
10. Bronchioles
A sample of 9.30 g of solid calcium hydroxide is added to 34.0 mL of 0.410 M aqueous hydrochloric acid. Write the balanced chemical equation for the reaction. Physical states are optional.
0.612 gram of calcium chloride is produced and excess reactant is 9.19 grams.
The balanced chemical equation is -
[tex] Ca(OH)_{2}[/tex] + 2HCl -> [tex] CaCl_{2}[/tex] + 2[tex] H_{2}[/tex]O. The reactants on LHS are calcium hydroxide and hydrochloric acid while products on RHS are calcium chloride and water.
Calculating the product formed from 9.30 gram of calcium hydroxide
Molar mass of calcium hydroxide = 111 gram
Molar mass of calcium hydroxide = 74 gram
Mass of calcium chloride produced from calcium hydroxide = (9.6 × 111) ÷ 74
Mass of calcium chloride produced from calcium hydroxide = 14.38 gram
Mass of calcium chloride produced from hydrochloric acid = (34.5/1000) × 0.320 × 111 × (1/2)
Mass of calcium chloride produced from hydrochloric acid = 0.612 gram
Since hydrochloric acid is the limiting reagent, it complete consumption will stop the process. Hence, after completion of reaction, 0.612 gram of calcium chloride will be formed.
Initial amount of HCl = (34.5/1000) × 0.320
Initial amount of HCl = 0.0110 moles of HCl
Moles of [tex] Ca(OH)_{2}[/tex] used = 0.0110 × (1/2)
Moles of [tex] Ca(OH)_{2}[/tex] used = 0.00552 moles
Initial amount of [tex] Ca(OH)_{2}[/tex] = 9.60/74.09
Initial amount of [tex] Ca(OH)_{2}[/tex] = 0.1296 moles
Excess reactant = (0.1296 - 0.00552) × 74.09
Excess reactant = 9.19 grams.
The reaction will produce 0.612 grams hydrochloric acid and 9.19 grams of excess reactant.
Learn more about limiting reagent -
https://brainly.com/question/26905271
#SPJ4
The complete question is attached in diagram.
If the half-life of a radioactive substance is 950 million years and you have 96
atoms of it, how many half-lives will have passed by the time that 6 atoms of
the substance remain?
OA. 2
OB. 5
OC. 4
O D. 6
SUBMIT
There would be a total of about 4 half lives
What is the half life?Half-life is a term used in nuclear physics and chemistry to describe the amount of time it takes for half of a given quantity of a radioactive substance to decay. It is the time required for half of the original quantity of the substance to undergo radioactive decay.
We know that;
N/No = (1/2)^t/t1/2
6/96 = (1/2)^t/950 * 10^6
(1/2)^4 = (1/2)^t/950 * 10^6
4 = t/950 * 10^6
t = 3.8 * 10^9
Number of half lives = 3.8 * 10^9/950 * 10^6
= 4 half lives
Learn more about half lives:https://brainly.com/question/30599798
#SPJ1
an oxygen atom at a particular site within a dna molecule can be made to execute simple harmonic motion when illuminated by infrared light. the oxygen atom is bound with a spring-like chemical bond to a phosphorus atom, which is rigidly attached to the dna backbone. the oscillation of the oxygen atom occurs with frequency fo
The oscillation of the oxygen atom occurs with frequency fo = 3.7 × 10¹³ Hz when oxygen atom replace to sulfur the frequency of sulfur is 2.7 × 10¹³ Hz.
The frequency expression is given as :
F = ( 1/ 2π ) × √(k/m)
or F² m = k / 4π²
now. if oxygen atom is replaced by the sulfur atom:
(F² m) oxygen = ( F² m) sulfur
F sulfur = F oxygen × √ (m oxygen / m sulfur)
F sulfur = 3.7 × 10¹³ × √ 16 / 32
F sulfur = 2.7 × 10¹³ Hz.
Thus, An oxygen atom at a particular site within a DNA molecule can be made to execute simple harmonic motion when illuminated by infrared light. the oxygen atom is bound with a spring-like chemical bond to a phosphorus atom, which is rigidly attached to the DNA backbone. the oscillation of the oxygen atom occurs with frequency fo = 3.7 × 10¹³ Hz when oxygen atom replace to sulfur atom the frequency of sulfur is 2.7 × 10¹³ Hz.
To learn more about frequency here
https://brainly.com/question/14398865
#SPJ4
How are the elements in hydrogen chloride bonded together? helpp
Explanation:
Chlorine has a higher electronegativity than hydrogen, but the chlorine atom's attraction for electrons is not sufficient to remove an electron from hydrogen. Consequently, the bonding electrons in hydrogen chloride are shared unequally in a polar covalent bond.
a solid consisting of clear crystals is combined with a blue liquid in a container, and the following observations are obtained:
A solid consisting of clear crystals is combined with a blue liquid in a container and the following observations are obtained 3.
A chemical response might be going on these aren't specific indicators a chemical response may not be occurring. An exchange in shade isn't constantly a chemical change. A chemical change has taken region. One way that we recognize that is due to the fact bubbles are fashioned. those bubbles suggest that the hydrogen peroxide has been damaged aside from water and oxygen.
The trade that happens whilst or greater materials act on each other to form an exceptional substance. Use this word in a sentence or provide an instance to show you understand what means when the color scent and flavor of the aggregate changed I knew a chemical reaction had taken place. sometimes when solutions go through a chemical reaction one of the new products formed from the response is not soluble.
Learn more about Observations here:-https://brainly.com/question/584814
#SPJ4
if you wanted to produce 4 moles of so3 gas, how many moles of so2 would you need to react? (assume an unlimited supply of o2 gas.) italic 2 italic space s o subscript italic 2 italic space italic (g italic )italic space italic plus italic space o subscript italic 2 italic space italic (g italic )italic space italic rightwards arrow italic 2 italic space s o subscript italic 3 italic space italic (g italic )
If we wanted to produce 4 moles of SO3 gas, we needed to react: 4 moles of SO2. This is because SO2 to SO3 coefficient ratio is 2:2.
How many moles of SO2 would we need to react?To determine how many moles we need to react, first, we got to write the balanced chemical equation of this reaction:
2SO2(g) + O2(g) --> 2SO3(g)
The number of coefficients is equal to the ratio of moles. The ratio of SO2: SO3 is 2:2. As we want to produce 4 moles of SO3 gas, the amount of SO2 we would need to react will also be 4 moles. Hence, the correct answer is 4 moles of SO2.
Learn more about stoichiometry here https://brainly.com/question/16060223
#SPJ4
the structure of one form of boron nitride is represented above. this form of boron nitride is one of the hardest substances known. which of the following best helps explain why boron nitride is so hard?
The structure of one form of boron nitride . this form of boron nitride is one of the hardest substances known as the boron nitride is the network solid of atoms that are covalently bonded with the fixed angle.
The boron nitride is the solid network of covalently bonded atom with fix angle. boron nitride will compressed to a super hard. its hardness based on the lattice work of the boron and the nitrogen atoms.
Thus, The structure of one form of boron nitride . this form of boron nitride is one of the hardest substances known as the boron nitride is the network solid of atoms that are covalently bonded with the fixed angle.
To learn more about boron nitride here
https://brainly.com/question/11573254
#SPJ4