Complete question is;
What is the electrical potential at the surface of gold nucleus? The radius of a gold atom is 6.6 × 10^(-5) m and atomic number z = 79.
Answer:
172.36 × 10^(-5) V
Explanation:
We are given;
Radius; r = 6.6 × 10^(-5) m
Atomic number; Z = 79
Formula for Electric potential here is;
V = kZe/r
Where;
e is charge on proton = 1.6 × 10^(-19) C
k has a constant value of 9 × 10^(9) N⋅m²/C²,
Thus;
V = (79 × 1.6 × 10^(-19) × 9 × 10^(9))/(6.6 × 10^(-5))
V = 172.36 × 10^(-5) V
The football team is selling mulch as a fundraiser. Which two options are
advantages of putting the order form online?
A. This information is transmitted using analog signals, so more
information can be sent.
B. This information is transmitted digitally, making it more reliable.
C. Any noise affecting the analog signal can be easily interpreted
correctly.
O D. Noise does not affect the digital signal, making it more reliable.
Answer:
Noise does not affect the digital signal, making it more reliable. This information is transmitted digitally, making it more reliable
Explanation:
Just did it on Ape.x
This information is transmitted digitally, making it more reliable. Noise does not affect the digital signal, making it more reliable. The correct options are B and D.
What is digital transmission?The transfer and reception of data in the form of a digital bitstream or a digitized analogue signal transmitted through a point-to-point or point-to-multipoint communication channel is known as data transmission and reception, or, more broadly, data communication or digital communications.
Because digital switching systems are substantially less expensive than analogue switching systems, digital transmission is used to achieve high reliability.
However, the analogue signals that make up the majority of speech, radio, and television must be used for digital transmission.
This information is more dependable because it is conveyed digitally. The digital signal is unaffected by noise, increasing its dependability.
Thus, B and D are the correct options.
For more details regarding digital transmission, visit:
https://brainly.com/question/29393615
#SPJ5
23. What mass of water will give up 240 calories
when its temperature drops from 80°C to 68°C?
Answer:
20g
Explanation:
Given parameters:
Quantity of heat = 240calories
Initial temperature = 80°C
Final temperature = 68°C
Unknown:
Mass of water = ?
Solution;
To solve this problem, we use the expression:
Q = m c (t₂ - t₁)
Q is the quantity of heat
m is the mass
c is the specific heat = 1 cal/g°C
t₂ is the final temperature
t₁ is the initial temperature
Insert the parameters and solve;
Change in temperature is an absolute value
240 = m x 1 x (68 - 80)
m = 20g
A concave lens can be used to produce an enlarged and erect image. True or False?
Answer:
False
Explanation:
A single concave lens has the opposite effect of a magnifying glass.
A Nov-Dec power bill shows that a home uses 1355 kwh over a 30-day period. Find the energy used (in kJ) for the 30-day period.
Answer:
The energy used for the 30-day period is 4878000 kilojoules.
Explanation:
According to the power bill, 1355 kilowatt-hours was used over a 30-day period. A kilowatt-hour is equal to 3600 kilojoules. Then, we calculate the energy used, measured in kilojoules, is determined by simple rule of three:
[tex]E = 1355\,kWh\times \frac{3600\,kJ}{1\,kWh}[/tex]
[tex]E = 4878000\,kJ[/tex]
The energy used for the 30-day period is 4878000 kilojoules.
The masses of the two moons are determined to be 2M2M for Moon AA and MM for Moon BB . It is observed that the distance between Moon BB and the planet is two times that of the distance between Moon AA and the planet. How does force exerted from the planet on Moon AA compare to the force exerted from the planet on Moon BB
Answer:
F_A = 8 F_B
Explanation:
The force exerted by the planet on each moon is given by the law of universal gravitation
F = [tex]G \frac{m M}{r^{2} }[/tex]
where M is the mass of the planet, m the mass of the moon and r the distance between its centers
let's apply this equation to our case
Moon A
the distance between the planet and the moon A is r and the mass of the moon is 2m
F_A = G \frac{2m M}{r^{2} }
Moon B
F_B = G \frac{m M}{(2r)^{2} }
F_B = G \frac{m M}{4 r^{2} }
the relationship between these forces is
F_B / F_A = [tex]\frac{1}{2 \ 4 }[/tex] = 1/8
F_A = 8 F_B
Answer:
F_A = 8 F_B
Explanation:
The force exerted by the planet on each moon is given by the law of universal gravitation
F =
where M is the mass of the planet, m the mass of the moon and r the distance between its centers
let's apply this equation to our case
Moon A
the distance between the planet and the moon A is r and the mass of the moon is 2m
F_A = G \frac{2m M}{r^{2} }
Moon B
F_B = G \frac{m M}{(2r)^{2} }
F_B = G \frac{m M}{4 r^{2} }
the relationship between these forces is
F_B / F_A = = 1/8
F_A = 8 F_B
You throw a baseball straight up in the air with an initial velocity of 41 m/s What is the maximum height the baseball reaches above your hand?
Answer:
85.77 m
Explanation:
From the question given above, the following data were obtained:
Initial velocity (u) = 41 m/s
Final velocity (v) = 0 m/s (at maximum height)
Acceleration due to gravity (g) = 9.8 m/s²
Maximum height (h) =?
The maximum height reached by the ball can be obtained as follow:
v² = u² – 2gh (since the ball is going against gravity)
0² = 41² – (2 × 9.8 × h)
0 = 1681 – 19.6h
Collect like terms
0 – 1681 = –19.6h
–1681 = –19.6h
Divide both side by –19.6
h = –1681 / –19.6
h = 85.77 m
Thus, the maximum height reached by the ball is 85.77 m
WILL GIVE BRAINLIEST TO THE CORRECT ANSWER
PLEASE HELP THIS IS DUE TODAY!
If a 1000kg car is accelerating at 3m/s/s for 4 seconds how far will it travel
A2 kg object moves at a constant 5 m/s across a level surface. Determine its kinetic energy.
Marvin the Martian needs to get back home. Marvin is 321,770 m from his home on Mars. He decides the quickest way to get home is to use his canon to fire himself into flight. He aims the the canon at an angle of 25 degrees. When the canon is fired Marvin the Martian is launched into flight at an initial velocity of 1250 m/s. The question is will his plan work
Answer:
y = 14238 m. the height of the rocket is much less than this distance therefore the plan will not work.
Explanation:
Let's analyze this exercise, so that the Martian's plan works, the vertical height of the body must be zero when it is more than half of the way to the planet Mars, this is so that Mars attracts it and can arrive.
Let's calculate the maximum height of the launch
[tex]v_{y} ^2 = v_{oy}^2 - 2 g y[/tex]
at the highest point [tex]v_{y}[/tex] = 0
y = v_{oy}² / 2g
y = (v₀ sin θ)² / 2g
let's calculate
y = (1250 sin 25)² /2 9.8
y = 14238 m
In the exercise, indicate that the distance to Mars is h = 321770 m, half of this distance is
h / 2 = 160885 m
therefore the height of the rocket is much less than this distance therefore the plan will not work.
The height reached is low, so it is not necessary to take into account the variation of g with height
How will a metal container full of hot water in vaccum lose heat?
what medical uses does radiation have?
Answer:
Radiation is used in monitoring the response of tumors to treatment and in distinguishing malignant tumors from benign ones. Bone and liver scans can detect cancers that have spread to these organs. Half of all people with cancer are treated with radiation, and the number of those who have been cured continues to rise.
Explanation:
''.''
Sketch the electric field around these two objects if they have the same sign of charge. Make a separate drawing showing equipotential lines around the two charges. The potential is defined to be zero at infinity. Identify the line of zero potential between the two charges, if there is one.
Answer:
* far from one of the charges, the field of the other charge is small and can be neglected
* on the outside of the loads the fields are added territorially
* between the charges the two fields tend to vanish
Explanation:
The electric field around two objects with charge of the same sign, for simplicity suppose that the objects have positive point spherical charges,
E = k q / r2
bold letters indicate vectors, therefore the total electric field is
E_total = E1 + E2
the module of this field is
E_total = E1- E2
therefore we can outline this field
* far from one of the charges, the field of the other charge is small and can be neglected
* on the outside of the loads the fields are added territorially
* between the charges the two fields tend to vanish
An outline of these shows in Attachment A
The equipotential surfaces are defined as being perpendicular to the electric field lines since the electric field and the power difference are related
E = [tex]\frac{dV}{dx} i^ + \frac{dV}{dy} j^ + \frac{dV}{dz} k^ = \Delta V[/tex]
We can schematize some characteristics of these surfaces
* very close to each load are spherical surfaces
* very far from the load is an elliptical surface, which envelops the loads
* between them there is a point of zero potential point C
See attached part B
Identify one major challenge of conducting developmental research and provide an example of how a researcher can overcome it.
Answer: pointing back
Explanation:
Anthony is standing on the top of a building 10 m high holding a 7 kg
bowling ball. Mildred dug a 2-m-deep hole next to the base of the
building. What is the gravitational potential energy of the bowling ball
relative to the bottom of the hole?
I reallly need help!!
Answer:
548.8 J
Explanation:
Using a pulley, you apply a force of 10 Newtons to life an object that weighs 100 Newtons. What is the mechanical advantage of that pulley?
Answer: 10
Explanation:
The mechanical advantage of that pulley is 10.
What is mechanical advantage?The force amplified by utilizing a tool, mechanical device, or machine system is known as mechanical advantage. To achieve the desired output force amplification, the gadget trades off input forces against movement. The law of the lever serves as a paradigm for this.
Mechanisms are machine parts made to control forces and motion in this way.
Given that: the weighs of the object: W = 100 Newton.
Applied force: F = 10 N.
For using a pulley, you have to apply a force of 10 Newtons to lift an object that weighs 100 Newtons.
Hence, the mechanical advantage of the pulley is
= Weighs of the object/applied force
= 100 Newton / 10 Newton.
= 10.
The mechanical advantage of it is 10.
Learn more about mechanical advantage here:
https://brainly.com/question/16617083
#SPJ5
An automobile which set the world record for acceleration increase speed from rest to 96 km/h in 3.07 seconds what distance traveled by the time the final speed was achieved
Answer:
41.02m
Explanation:
Given parameters:
Initial velocity = 0m/s
Final velocity = 96km/hr
Time taken = 3.07s
Unknown:
Distance traveled by the time the final speed was achieved = ?
Solution:
To solve this problem, we first find the acceleration of the car;
Acceleration = [tex]\frac{v - u }{t}[/tex]
v is the final velocity
u is the initial velocity
t is the time taken
Now convert the the final velocity to m/s;
96km/hr to m/s;
1 km/hr = 0.278m/s
96km/hr = 96 x 0.278 = 26.7m/s
Now;
Acceleration = [tex]\frac{26.7 - 0}{3.07}[/tex] = 8.69m/s²
So;
v² = u² + 2as
v is the final velocity
u is the initial velocity
a is the acceleration
s is the distance
26.7² = 0² + 2 x 8.69 x s
712.89 = 17.38s
s = 41.02m
Which type of telescope is best used to detect distant planets?
A local FM radio station broadcasts at a frequency of 97.3 MHz. Calculate the energy of the frequency at which they are broadcasting. Energy
Answer:
6.45×10¯²⁶ J
Explanation:
From the question given above, the following data were obtained:
Frequency (f) = 97.3 MHz
Energy (E) =?
Next, we shall convert 97.3 MHz to Hz. This can be obtained as follow:
1 MHz = 1×10⁶ Hz
Therefore,
97.3 MHz = 97.3 MHz × 1×10⁶ Hz / 1 MHz
97.3 MHz = 9.73×10⁷ Hz
Thus, 97.3 MHz is equivalent to 9.73×10⁷ Hz.
Finally, we shall determine the energy at which the frequency is broadcasting. This can be obtained as follow:
Frequency (f) = 9.73×10⁷ Hz
Planck's constant (h) = 6.63×10¯³⁴ Js
Energy (E) =?
E = hf
E = 6.63×10¯³⁴ × 9.73×10⁷
E = 6.45×10¯²⁶ J
Therefore, the energy at which the frequency is broadcasting is 6.45×10¯²⁶ J
How much power is generated if a person applies 220 N of force to move a bicycle 5 min 10 s?
Complete question :
How much power is generated if a person applies 220 N of force to move a bicycle 5m in 10 s?
Answer:
Explanation:
Given that :
Force = 220N
Time = 10 seconds
Distance = 5 m
Power = Workdone / time
PLEASE ANSWER FAST ill give brainliest
Calculate the density of water in kg/m3. Express your answer in kilograms per cubic meter using three significant figures.
Answer:
This question appear incomplete
Explanation:
This question appear incomplete. However, the density of water is generally known to be 997 kg/m³. The formula used to determine density is mass ÷ volume. In the case of the density of water, the mass is measured in kilograms (kg) while the volume is measured in cubic meter (m³).
A 55.0 kg student feels a
2.68 x 10-8 N gravitational force
from a Physics book 0.435 m away.
What is the mass of the Physics
book?
Mass of book will be m = 4.495 kg
What is gravitational force ?The force of attraction between all masses in the universe; especially the attraction of the earth's mass for bodies near its surface is called gravitational force
Force = 2.68 x 10-8 N
mass of student(M) = 55
mass of book=?
distance = 0.435m
gravitational constant (G)=6.67×10^-11
gravitational force (F)=2.68×10^-8
gravitational force (F) = (G*M*m) /[tex]d^{2}[/tex]
2.68 x 10-8 = ((6.67×10^-11) * ( 55 ) * m) / 0.435
m = 4.495 kg
Mass of book will be m = 4.495 kg
learn more about gravitational force
https://brainly.com/question/12528243?referrer=searchResults
#SPJ2
Answer:
acellus students
Explanation
1.382
During the study of the objects,What we can observe
use particle motion to explain what happens when molten steel becomes a steel beam to be used in construction.
Explanation:
A molten steel is in a liquid phase of matter. It has no defined volume of shape at this state. The particles inside this materials in this form is randomized by they are still attached to each other.
On cooling, when the molten steel solidifies and sets into a solid steel beam, the particles take up a fixed position and forms a definite shape and this confers a definite volume on them. The randomized particles stops and forms fixed crystals about their lattice. This way, the beam can carry and support a fixed amount of load.Use the graph and the table above to complete the table by estimating the amount of energy transferred near location B.
A.
1600 kilojoules
B.
300 kilojoules
C.
800 kilojoules
D.
400 kilojoules
E.
3200 kilojoules
Answer:
A. 1600 kilojoules
Explanation:
Looking at the graph, at 4 meters, we can guess the energy transferred would be around 1500 kilojoules. 1600 kilojoules is the closest to that value, so A would be the best choice.
Answer right I will cashapp $5
Someone made a copy of an analog wave and a digital wave. Compare the copies
with the original waves. Then, explain which type of wave is a more reliable way to
encode and transmit information.
Answer:
The original analog sound waves are perfect but the copy is not because most analog waves have wavelengths that are too long to reproduce in copies
The original digital waves and the copy are perfect because with digital waves no information gets lost in the transfer of data, and there is no additional noise added to the copy.
Analog refers to audio recorded using methods that replicate the original sound waves. Digital audio is recorded by taking samples of the original sound wave at a specified rate.
Explanation:
i dont need $5
i wrote this using information from go ogle and some from brai nly. I hope it helps.
Are the coils in an electric heater blackbody radiators? Why?
A. No, because they do not emit different wavelengths of light
B. Yes, because they glow more brightly as they increase in
temperature
O C. No, because they absorb no energy and emit no light
D. Yes, because they reflect most of the energy they receive
Answer:
B. Yes, because they glow more brightly as they increase in
temperature
Explanation:
Did the test !!
The coils in an electric heater blackbody are not radiators. Because, they absorb no energy and emit no light. Thus, the correct option is C.
What is an electric heater?Electric heating is a process in which the electrical energy is converted directly into the heat energy at around about 100% efficiency, using rather the cheap devices. Common applications which are included are space heating, cooking, water heating and industrial processes.
A radiator is the key component of the engine's cooling system. Radiator has the main role to disperse a mix of antifreeze and water molecules throughout the fins, which releases some of the engine's heat energy while taking in the cool air before continuing to pass the rest of the electric engine.
Therefore, the correct option is C.
Learn more about Electric heater here:
https://brainly.com/question/15629252
#SPJ2
A football player kicks a ball with a mass of 0.5 kg. The average acceleration of the football was 15 m/s/s. How much force did the kicker apply to the football?
Answer:
i think its 8.2
Explanation:
5. What is the area of space around a magnet called?
O Magnetic field
O Magnetic space
O Induced magnet
ILL MARK BRAINLYEST PLZ HELPPPP HURRY !!!!!!!!!!!!!!!!!!!!!!!!
Answer:
Magnetic Field
Explanation:
Answer:
Magnetic field
Explanation:
A man drops a ball off of a 7.2 m high cliff, what is the ball's velocity as it hits the ground?
(- 12m/s)
Proof llease
Answer:
19.3 m/s
Explanation:Take down to be positive. Given:
Δy = 19 m
v₀ = 0 m/s
a = 9.8 m/s²
Find: v
v² = v₀² + 2aΔy
v² = (0 m/s)² + 2 (9.8 m/s²) (19 m)
v = 19.3 m/s
My camera quality is bad. Sorry..