what is the final speed of the stationary ball if the incoming ball is much more massive than the stationary ball?

Answers

Answer 1

Similar to a head-on shot only with cue ball on a pool table, the projectile shall come to rest and the target will go off with an equal velocity for a head-on impact with a stationary vehicle of equal mass.

Is final velocity and speed same?

It's easy to understand why. Velocity is the pace and orientation of an object's movement, whereas speed is really the time rate that an object is travelling along a path. In other words, velocity is a vector, whereas speed is just a scalar value.

How can a distance-time graph be used to determine final speed?

The gradient of a line - of - sight graph is equal to the alteration in space divided by the difference in time. Thus, the grade of a graph of distance vs time is equal to the speed of a item whose motion is captured by the line that plots the changes in distance over time.

To know more about Final speed visit:

https://brainly.com/question/14863785

#SPJ4


Related Questions

because of the pressure inside a popcorn kernel, water does not vaporize at 100°C. Instead, it stays liquid until its temperature is about 175°C, at which point the kernel ruptures and the superheated water turns into steam. How much energy is needed to pop 95.0 g of corn if 14 percent of a kernel's mass consists of water? Assume that the latent heat of vapor- ization for water at 175°C is 0.90 times its value at 100°C and that the kernels have an initial temperature of 175°C.​

Answers

The energy needed is 35.4 KJ, to pop the corn of a given quantity, and by using latent heat of vaporization of water.

What is Energy?

When work is done and heat and light are produced, energy is the quantitative quality that is transferred to the body or to the physical system. The law of conservation of energy asserts that although energy can be changed in form, it cannot be created or destroyed. Energy is a conserved quantity.

Calculations:

The boiling point of water is 175 °C.

The mass of corn is 95.0 g.

The percentage of water in corn is 14%.

The latent heat of vaporization for water at 175 °C is 0.90 times its value at 100 °C.

Calculate the mass of water,

Mw = (14/100) × (95g) × (1kg/1000g)

      =  0.0133 Kg

calculate the latent heat of vapourization,

Lv = (0.9) × (2.26 × [tex]10^{6}[/tex]J/kg)

   =  2.034 × [tex]10^{6}[/tex] J/kg

Total heat required,

Q = Mw  Lv + Mw. C Δ T

Substitute the values,

Q = (0.0133) × (2.034 × [tex]10^{6}[/tex]) + (0.0133) × (4186) × (175.25)

  = (35403.27 J) × ( 1KJ/ 1000J)

  = 35.4 KJ

Hence, the energy needed is 35.4 KJ, to pop the corn of a given quantity.

To know more about Energy, check out:

https://brainly.com/question/13881533

#SPJ1

the efficiency of a solar cell is defined as the percentage of the total energy input that does useful work. t or f

Answers

The efficiency of a solar cell is defined as the percentage of the total energy input that does useful work. Hence, this statement is true.

Efficiency of a solar cell refers to the ratio of solar cell result to input energy from the sun rays. Efficiency means an indicator that is used to compare the presentation of one solar cell to another. Efficient energy can be described as the process of make the amount of energy required to provide products and services become less than before. The example of efficient energy is insulating a building lets it to make less heating and cooling energy to get and maintain a thermal comfort. Energy-efficient homes and buildings use energy to heat a bit, cool, and run appliances and electronics, and energy-efficient manufacturing facilities use a bit energy to create items.

Learn more about solar efficiency, here https://brainly.com/question/24145918

#SPJ4

A white ball traveling at 5.0 m/s east hits a stationary orange ball that has
the same mass. The white ball stops, and the orange ball moves away at 5.0
m/s east. What is true for this collision?
The collision is inelastic because kinetic energy is conserved.
A
B
The collision is inelastic because kinetic energy is not conserved.
C The collision is elastic because kinetic energy is conserved.
D The collision is elastic because kinetic energy is not conserved.

Answers

The kinetic energy of balls is conserved, the collision is elastic.

What is conservation of energy?Energy conservation in physics is a fundamental law of chemistry and physics stating that the total energy in an isolated system is constant despite internal changes. It is most commonly expressed as "energy can neither be created nor destroyed", and is the basis of the first law of thermodynamics.An elastic collision is one in which the system suffers no net loss of kinetic energy as a result of the collision. In an elastic collisions, both momentum and kinetic energy are conserved.When one reactant loses momentum or kinetic energy, the other reactant gains the very same amount of momentum or kinetic energy. Thereby, the total amount of kinetic momentum and energy of the system would then remain as it is, and therefore, kinetic energy is conserved.

To learn more about kinetic energy refer to :

https://brainly.com/question/26340342

#SPJ1

Two water-skiers, with masses of 48 kg and 61 kg, are preparing to be towed behind the same boat. When the boat accelerates, the rope the skiers hold onto accelerates with it and exerts a net force of 290 n on the skiers. At what rate will the skiers accelerate?

Answers

The rate at which the skiers accelerate is 2.7 m/s.

What is force?

A force applied to a body can change the magnitude of the momentum or its direction or both. Newton's second law is one of the most important in all of physics. For a body whose mass m is constant, it can be written in the form F = ma, where F (force) and an (acceleration) are both vector quantities.

What is Ma in force?
Newton's second
law is often stated as F=ma, which means the force (F) acting on an object is equal to the mass (m) of the object times its acceleration (a). This means the more mass an object has, the more force you need to accelerate it. And the greater the force, the greater the object's acceleration.

[tex]F=ma[/tex]

Given : m=48+61, F=290N

[tex]290=(48+61)*a\\a=290/109\\a=2.7 m/s^{2}[/tex]

To know more about force:
https://brainly.com/question/20005124
#SPJ1

Batman (95kg) is standing on top of a 50m high building looking out over the city of Gotham. Given that he uses the potential energy to swoop down to save his city, how much energy does he have by going up so high?

Answers

Answer:

47 kJoules (kJ)

Explanation:

Potential enegy on Earth is given by the relationship:

P.E. = mgh, where m is mass, g is the acceleration due to Earth's gravity, and h is height. Since we are given metric values, we will look for an answer that is consistent with Joules, the metric measure of energy. 1 Joule is defined as 1 kg*m^2/s^2, so we wnat units of kg, m, and sec.

We are given:

m = 95kg

h = 50 meters

Earth's gravity, g is 9.8 m/s^2

Enter the data:

P.E. = mgh

P.E. = (95kg)(9.8m/s^2)(50m)

P.E. = 46550 kg*m^2/s^2 or 46550 Joules(J)

Since we only have 2 sig figs, and since 1kJ =- 1000J

We can state the potential energy is 47kJ.

Spiderman has 47kJ of potential energy for the start of any dive back to Earth. [He needed that same amount of energy to reach that height, but we don't know from where it came. A jump, helicopter, beamed up by Scotty, or tossed up by Doctor Octopus.]

what are three pieces of evidence that are used to confirm the big bang model? (select all that apply)

Answers

According to astronomers, the whole universe started with a giant explosion called as Big Bang. Big Bang theory shows that the universe is extended from high density state. It says that universe is made up of a single point, which stretched and explodes out and is still stretching.

There are some evidences for big bang, they are:

1) There are some red shifts of different galaxies which means that the universe is expanding.

2) Due to the expanding of universe, some of the new elements are created like hydrogen, deuterium, etc.

3) Microwaves are detected by orbiting detectors.

Thus, these parameters show that Big Bang theory is correct.

To know more about big bang theory:

https://brainly.com/question/17653531

#SPJ4

which type of meteorite is rich in volatiles and thus provides the best samples of the solar nebula?

Answers

Carbonaceous Chondrites are rich in volatiles and thus provide the best samples of the solar nebula.

Meteorites may contain roughly spherical particles called “chondrules”, and these meteorites are accordingly called “chondrites.”

Chondrites which are often porous in structure and tend to be quite dark due to a large presence of organic, i.e., carbon-containing, substances, are called “carbonaceous chondrites.”

All Carbonaceous chondrites are rather porous and contain significant amounts of water and organic substances. So, they are rich in volatiles.

Carbonaceous chondrites are considered to be the most primitive objects in the solar system, and they can provide valuable insights into the conditions that existed during the very earliest days of the solar system. So, they are the best samples of the solar nebula.

To know more about solar nebula here

brainly.com/question/28715616

#SPJ4

A roller-coaster goes over an 13 m tall hill then approaches a 26 m hill. What is the minimum velocity the roller-coaster would need when going over the 13 m hill to make it to the top of the 26 m hill?

Answers

The minimum velocity the roller-coaster would need when going over the 13 m hill to make it to the top of the 26 m hill is 16.56 m/s.

What is force?

Force is defined as the physical quantity or the power.

the normal force would havening  to point away from the group center of the curve. Unless they have belts, the riders will fall from the cars.

In a teardrop-shaped in the continuous loop the radius of curvature r decreases, causing them centripetal acceleration to increase. The speed would be  decrease as the car rises (because of gravity), but it is they are

overall by the effect is that the required centripetal force of the increases, meaning is the  normal force increased there is less danger if not to the  wearing a seat belt.

Suppose the minimum velocity is v.

Then mechanical energy at top of 13m hill is:

0.5 mv² + mgh

= 0.5 mv² + 15mg

g = 9.81 m/s/s (acceleration due to gravity).

All of this (assuming no loss due to friction) is converted to potential energy at top of 29m hill

So,

0.5 m v² + 15mg = 29mg

0.5 m v² = 14 mg

v² = (14 × 9.8)/0.5

v² = 274.4

v = 16.56 m/s

To know more about force click-

https://brainly.com/question/388851

#SPJ1

What role does gravity play in the orbit of planets?

Answers

Answer: Gravity is what holds the planets in orbit around the sun and what keeps the moon in orbit around Earth

Explanation:

nmr spectroscopy, or magnetic resonance spectroscopy, is a very important tool in the determination of organic structures. this technique relies on the interaction of a particular nucleus with a field followed by absorption of energy of a specific , depending on the chemical environment of the nucleus.

Answers

Nmr spectroscopy, or magnetic resonance spectroscopy, is a very important tool in the determination of organic structures.

What is NMR spectroscopy used for?
NMR spectroscopy
is the use of NMR phenomena to study the physical, chemical, and biological properties of matter. Chemists use it to determine molecular identity and structure. Medical practitioners employ magnetic resonance imaging (MRI), a multidimensional NMR imaging technique, for diagnostic purposes.

How is NMR spectroscopy used in the identification of organic molecules?
Nuclear Magnetic Resonance (NMR)
is an important technique to elucidate unknown organic molecules. But its sensitivity is limited and many elements lack an NMR observable isotope. So a full structure elucidation relies on several spectroscopic techniques and is normally performed by an experienced spectroscopist.

What type of radiation is used for NMR?
Like all spectroscopies, NMR uses a component of electromagnetic radiation (radio frequency waves) to promote transitions between nuclear energy levels (Resonance). Most chemists use NMR for the structure determination of small molecules.

This technique relies on the interaction of a particular nucleus with a field followed by the absorption of energy of a specific , depending on the chemical environment of the nucleus with a nuclear, magnetic field followed by absorption of energy of a specific frequency depending on the chemical environment of the nucleus.

To know more about NMR spectroscopy:
https://brainly.com/question/17564948
#SPJ1

ased on what you know about meteorites, select all of the correct statements from the following list. Most meteorites come from asteroids. Iron meteorites come from the cores of larger objects. Some stony meteorites resemble cooled lava Like most meteorites, stony meteorites come from comets and asteroids. Stony meteorites come from the outer layers of larger objects Iron meteorites cooled from their molten state very quickly Most meteors come from comets.

Answers

The correct statements are Stony meteorites come from the outer layers of larger objects and Most meteors come from comets.

In geologic terms, it is the crust of our planet, which is described in a dictionary as "the outermost solid layer of a planet or moon." Because it contains a lot of oxygen and water, our planet's outer crust is very unique compared to that of other solar system bodies. Rain, wind, and ice have continuously shaped and changed the surface of our planet.The Earth's crust is made up of sedimentary rocks, many of which are abundant in fossils, or the remains of extinct life forms, but no evidence of life on other planets has yet been found in these rocks.The most typical type of meteorite, stony meteorites, typically contain 75 to 90 percent silicon-based minerals, 10 to 25 percent nickel-iron alloy, and minute amounts of iron sulfide.Stony meteorites fall into two different categories and make up roughly 94% of observed meteorite falls that are Chondrites and Achondrites.

To study more about Stony meteorites -

https://brainly.com/question/29531083

#SPJ4

what materials can I use in an egg drop project to show equal forces acting in the opposite direction? And to show The acceleration of an object is connected to the force which is acting on it.

please respond to both of them and give the best answer possible
thank you

Answers

Answer:

Two coins.

Explanation:

place the at the sharp point

a wheel has eight spokes and a radius of 29.5 $cm$. it is mounted on a fixed axle and is spinning at 2.15 $rev/s$. you want to shoot a 22.5 $cm$ long arrow through the wheel, parallel to this axle, without hitting any of the spokes. assume that the arrow and the spokes are very thin and evenly spaced. what minimum speed must the arrow have?

Answers

When a wheel has eight spokes and radius and angular velocity is given then the minimum speed that the arrow must have is 3.87 m/sec.

What is spokes?

A bar or rod that connects the center of a wheel to its rim is known as spoke. The main purpose of spokes is to support structure of the wheel.

Given: radius = 29.5cm  and angular velocity = 2.14 rev/sec

length of arrow = 22.5cm

Angle between spokes = 2π/8 = π/4

Time taken to reach adjacent spoke =Ф/ω

= π/4/ 2.15 (2π)

= 0.058 sec

For the arrow to pass through spokes, time should be less than 0.058 sec.

Then, minimum speed = 22.5/100/0.058

= 3.87 m/sec

To know more about spokes , refer

https://brainly.com/question/1841108

#SPJ4

An oven with a convection setting has a fan and vent system that keeps air moving around inside of the oven. Conventional ovens do not have this type of system. Joelle claims that convection ovens cook food more quickly and evenly.
A) Construct an explanation for this claim

B) suggest how you could test this claim and support your explanation. Which variables would you control?

Answers

As the air flows through convection oven, the required temperature less for this type of oven and convection ovens cook food more quickly and evenly.

What is efficiency of convection oven?

Compared to a traditional oven, a convection oven enables a reduction in cooking temperature. This comparison will change based on various elements, such as the quantity of food being cooked at once or when airflow is being impeded, such as by an excessively large baking tray.

The fact that flowing air transfers heat more quickly than still air of the same temperature balances out this variation in cooking temperature. The temperature must be lowered to slow down the rate of heat transfer in order to transfer the same quantity of heat in the same length of time.

Learn more about convection oven here:

https://brainly.com/question/1226361

#SPJ2

3) A body of mass 10 kg is pulled from rest with a constant force of 40 N. The force is applied for 2 sec. calculate (a) The distance travelled (b) Work done on the body (c) The KE of the body (d) The final velocity of the body​

Answers

Answer:

Explanation:f=ma. S=ut+at(t)/2

s=at(t)/2  2s/t(t)=a

f=m(2s)/t(t)

f(t)(t)/2m=s

40(2)(2)/2(10)=s

160/20=s

s=8m

b.w=f(s)

40(8)=w. W=320J

KE=m(v)(v)/2

V(V)=U(u)+2aS

kE=M[(U)(u)+2as]

u=0

KE=2mas.  KE=2(10)(4)(8). KE=640J

v(v)=u(u)+2as

v(v)=2(4)(8)

v(v)=64

v=8

Can someone help with this question

Answers

Answer:

oxygen, hydrogen, and sulfur. It has a molecular weight of 98.079 g/mol. H2SO4 works as an oxidizing and dehydrating agent.

Explanation:

Oxygen and hydrogen are the water elements made from nature

Answer:

3 elements:

HydrogenSulfurOxygen

Explanation:

H₂SO₄ is the chemical formula for Sulfuric Acid.

An element’s chemical symbol is a single capital letter or a capital letter followed by a lower case letter.

The subscript number after the element's symbol indicates how many of that atom are in the compound.  

Therefore:

H₂ means there are two hydrogen atoms.S means there is one sulfur atom.O₄ means there are four oxygen atoms.

(If there is no number after an element, assume there is one atom of that element).

Note:  If there is a number in front of the compound (the "coefficient"), multiply the subscript for each element by the coefficient.

Therefore, for H₂SO₄ there are:

3 elements7 atoms

a large truck tire is inflated to a gauge pressure of 74 psi. the total area of one sidewall of the tire is 1,190 in2. what is the net outward force (

Answers

Therefore, the large truck's net outward force is 88,060 lb. Its gauge pressure is 74 psi, and one tire's sidewall's total covered area is 1190 in2.

What is gauge pressure?

When compared to atmospheric pressure, gauge pressure is the amount of pressure. Gauge pressure is positive for pressure above atmospheric pressure and negative for pressures below it. In actuality, any fluid not contained in a rigid container will experience an increase in pressure due to atmospheric pressure. Because of Pascal's principle, this occurs. A diaphragm sensor can be used to measure gauge pressure, with one side of the diaphragm exposed to the pressure medium that needs to be measured and the other exposed to the surrounding atmospheric pressure.

What is gauge pressure formula and why it is used?

Pg denotes gauge pressure, which has the following relationship to absolute pressure: Assuming that pa is the local atmospheric pressure, pg = p - pa. Example: The tire pressure is 32.0 psi, according to an automobile tire gauge. The surrounding atmosphere has a 14.2 psi pressure.

To monitor the pressure in a system as a quality control measure and to guarantee product consistency, pressure gauges are a crucial tool employed by industry. Pressure gauges keep an eye on the fluids, gases, and steam in a system to look for leaks or a buildup of pressure for safety reasons.

Briefing:

Gauge pressure = 74 psi

One sidewall area of tire = 1190 in2

Thus, the equation will be:

Net outward fore = Gauge pressure × Area of one sidewall of tire

Net outward force = 74 × 1190

Net outward force = 88,060 lb

To know more about Gauge Pressure visit:

https://brainly.com/question/29341536

#SPJ4

Suppose you are camping on a mountain and the air temperature is very cold. How would you keep warm? Would you build a fire or set up a tent?

Answers

Answer:

Build a fire

Explanation:

when an object is placed 12 inches from the face, how will the lens change to help focus on the object?

Answers

When an object is placed 12 inches from the face, then the lens : will thicken and therefore refract light more strongly.

How does the lens change to focus on objects that are close?

The process of changing the shape of the lens to focus on near or distant objects is called accommodation. To focus on a near object , lens becomes thicker which allows the light rays to refract more strongly.

Cornea provides most of the eye's optical power or light-bending ability. When the light passes through the cornea, it is bent again for more finely adjusted focus by the crystalline lens inside the eye. Lens helps in focusing the light on the retina.

To know more about lens, refer

https://brainly.com/question/9757866

#SPJ4

A group of students prepare for a robotic competition and build a robot that can launch large spheres of mass M in the horizontal direction with variable speed and from a variable vertical position and a fixed horizontal position x=0.
The robot is calibrated by adjusting the speed at which the sphere is launched and the height of the robot’s sphere launcher. Depending on where the spheres land on the ground, students earn points based on the accuracy of the robot. The robot is calibrated so that when the spheres are launched from a vertical position y=H and speed v0, they consistently land on the ground on a target that is at a position x=D. Positive directions for vector quantities are indicated in the figure.

When the students arrive at the competition, it is determined that the height of the sphere launcher can no longer be adjusted due to a mechanical malfunction. Therefore, the spheres must be launched at a vertical position of y=H2. However, the spheres may be launched at speed v0 or 2v0.
Question: In a clear response that may also contain diagrams and/or equations, describe which speed, v0 or 2v0, the students should launch the sphere at so that they earn the maximum number of points in the competition.

Answers

Free fall motion is motion in which the only force acting on the body is gravity.

What is free fall motion?

A free-falling object is one that moves only due to the effect of gravity, and its motion is defined by Newton's second law of motion. We can use algebra to calculate the acceleration of a free-falling particle.

The student should launch the sphere at 2v₀, for the sphere will land at approximately 1.41D, which is in the 3 point zone

The given parameter are;

The distance covered by the sphere when launched at height, H = D

The velocity with which the ball reaches D = v₀

The current available height of launcher= H/2

The available velocities = v₀, and 2v₀

Now,

From H = ut + (1/2)gt², where, initial velocity of the vertical motion of the ball, u = 0

we know;

H = (1/2)gt²

Therefore, the time it takes the ball to drop from H, t = √(2H/g)

The distance, D = v₀ × √(2H/g)

When the height is H/2, we get;

t = √(2H/(2g)) = √(H/g)

Thus, the distance covered, D₁ = v₀ × √(H/g)

Therefore, D = (√2) × v₀ × √(H/g) = (√(2))D₁

Now, D₁ = D/(√2) ≈ 0.71D

D₁ ≈ 0.71D

At speed 2v₀, we have;

D₂ = 2v₀ × √(H/g) = √2 × v2 × v₀ × √(H/g) = √2 × v₀ × √(2H/g) = √2D₁ ≈ 1.41D

D₂ ≈ 1.41D

The 2 point zone = D/2 < x < D = 0.5D < x < D (Position D₁ ≈ 0.71D is located here)

The 3 Point Zone =  D < x < 3D/2 = D < x < 1.5D (Position D₂ ≈ 1.41D is located here)

Given that at D₂, the ball lands in the 3 Point Zone, the student should launch the sphere at the speed, 2v₀, so that the ball will land at D₂ ≈ 1.41D,  which is in the 3 Point Zone

To know more about free fall motion refer to:

https://brainly.com/question/17842118

#SPJ1

The complete question is as follows:

A group of students prepare for a robotic competition and build a robot that can launch large spheres of mass M in the horizontal direction with variable speed and from a variable vertical position and a fixed horizontal position x=0.

The robot is calibrated by adjusting the speed at which the sphere is launched and the height of the robot’s sphere launcher. Depending on where the spheres land on the ground, students earn points based on the accuracy of the robot. The robot is calibrated so that when the spheres are launched from a vertical position y=H and speed v0, they consistently land on the ground on a target that is at a position x=D. Positive directions for vector quantities are indicated in the figure.

When the students arrive at the competition, it is determined that the height of the sphere launcher can no longer be adjusted due to a mechanical malfunction. Therefore, the spheres must be launched at a vertical position of y=H2. However, the spheres may be launched at speed v0 or 2v0.

Question: In a clear response that may also contain diagrams and/or equations, describe which speed, v0 or 2v0, the students should launch the sphere at so that they earn the maximum number of points in the competition.

intermediate level a 30 micro f capacitor is connected to a 9 v battery calculate the charge on the capicot

Answers

When a 30 micro of capacitor is attached to the a 9 v battery at its intermediate level, the equation states that 2.7μC is the charges on the capacitor.

What is the basic principle of a capacitor?

A capacitor operates on the basis that capacitance of the a conductor exhibits rise when a grounding conductor is introduced near it. As a result, the capacitance has parallel plates that are spaced apart from one another and facing in opposing directions.

What is a capacitor used for?

Two conductors that are separated from one another and positioned close to one another make up a capacitor, a electrical energy storage device. A parallel-plate capacitor is a simple example with one such storage device.

Briefing:

If we rearrange the previous formula to account for C=30F and V=9v in our issue, we can calculate the charge held in the capacitor:

             Q=CV

                =(30μF) (9v)

                =2.7μC

To know more about capacitor visit:

brainly.com/question/17176550

#SPJ4

how can i shift? ive been trying for a year? ive done everything :/

Answers

You just really have to believe and keep trying. It’ll take time and lots of focus but stay relaxed

Answer

Explanation: Ok so I had a lot of trouble with this too. What I did was get some butter beans and put them under my pillow (If you don't have butter bens then butter works but must be unsalted country croks butter. I can't believe it's not butter will not work because the spirit people know and will put a spell on you. Then you get a 8lb. sweet potato and tie it to a piece of tweed and hand it on your fan at the highest setting until it flies out the string. Where ever it lands is where you sleep. Sleep with the potato where it landed. 30 minutes before you go to bed brush your teeth with a special drink.

Drink Ingredients:

2 spinach leaves

1 ounce of maple syrup

3 spoons of coco butter

1 rabbit ear

7 bear hairs

2 toe nail clipping form your dad (If you don't have one then I would give up)

When you drink this and go to sleep dream about the magical elves and eaves that will come to you in your dream. They'll give ask you a question where you will answer "Yes papas fritas"

A large disformed mutant will appear. Don't be afraid. Approach with confidence.

After that a glowing door will appear and BAM you're shifting.

*Pls note this could end in serious harm and danger I do not recommend attempting as it can result in death, a coma, or other injury. Have a Beautiful day :)

How do you add non-collinear vectors?

Answers

Answer:

To add two non-collinear vectors, you first need to draw them on a coordinate plane so that their tails are at the same point. Then, you can use the "tip-to-tail" method to add the vectors. This involves drawing a vector from the tail of the first vector to the tip of the second vector, and this new vector is the sum of the two original vectors.

For example, if you have two non-collinear vectors, A and B, and you want to find their sum, you would first draw them on a coordinate plane so that their tails are at the same point. Then, you would draw a vector from the tail of vector A to the tip of vector B. This new vector, which is the sum of vectors A and B, is the result of adding the two vectors.

To calculate the sum of the vectors using the tip-to-tail method, you would simply add the x and y components of the two vectors separately. For example, if vector A has an x component of 3 and a y component of 4, and vector B has an x component of 5 and a y component of 6, the sum of the two vectors would be a vector with an x component of 8 and a y component of 10.

It's important to note that the sum of two non-collinear vectors is not necessarily a non-collinear vector. The sum of two non-collinear vectors can be a non-collinear vector, a collinear vector, or a zero vector (if the two original vectors are opposites of each other).


Zoe finds that the temperature of a substance is 12 degrees Celsius. What does this tell Zoe about the substance?

Answers

What this tells Zoe about the substance is that 12 degrees Celsius is the average kinetic energy of the substance.

What is temperature of a substance?

The temperature of a substance is defined as the average kinetic energy of all the atoms or molecules of that substance.

Also, the temperature of a substance is the measure of the degree of hotness or coldness of the substance.

The temperature of a substance can be measured with different units and they include the following;

KelvinCelsiusFahrenheit

Thus, the temperature of a substance tells about the average kinetic energy of the substance or the degree of hotness or coldness of the substance.

Learn more about temperature here: https://brainly.com/question/25677592

#SPJ1

light is refracted through a diamond. if the angle of incidence is 30°, and the angle of refraction is 12°, what is the index of refraction?

Answers

Light is bent when it travels through a diamond. If the light rays is 12° and the incidence angle is 30°, the refraction is 2.4.

How is refraction accomplished?

Light waves alter in speed as they pass across the boundary that separates two materials with distinct densities, such as air and glass. Refraction is the term for how they change direction as a result.

What produces reflection in light?

The rate at which light will change as it travels through one medium before entering another. As a result, refraction happens. The change in medium has an impact on how light passes through air and into water.

Briefing:

Snell's law states:

n₁sinθ₁ = n₂sinθ₂

n₂ = sinθ₁/ sinθ₂

n₂ = sin(30)/sin(12

n₂ = 2.4

To know more about refraction visit:

https://brainly.com/question/2660868

#SPJ4


1. Calculate the elastic potential energy when a spring with a spring constant of 15 N/m is extended by the
following amounts:
a) 1 m
d) 15 m
g) 0.3 m
b) 125 cm
e) 13 m
h) 12 m
c) 99 m
f) 120 cm
i) 0.05 km

Answers

The elastic potential energy will be =

For a)  7.5J

For d)  1687.5J

For g)  0.675J

For b) 11.718J

For e) 1267.5J

For h) 1080J

For c)  73507.5J

For f)  10.8J

For i)  18750J

According to the formula for calculating elastic potential energy,

Elastic potential energy (u) = 1/2 x spring constant x [tex](amount of extension)^{2}[/tex]

Let was calculate the value of 1/2 x spring constant to simplify the equation = 1/2 x 15 = 7.5

for a) 7.5 x [tex]1^{2}[/tex] = 7.5J

for d) 7.5 x [tex]15^{2}[/tex] = 1687.5J

for g) 7.5 x [tex]0.3^{2}[/tex] = 0.675J

for b) 7.5 x [tex]1.25^{2}[/tex] = 11.718J

for e) 7.5 x [tex]13^{2}[/tex] = 1267.5J

for h) 7.5 x [tex]12^{2}[/tex] = 1080J

for c) 7.5 x [tex]99^{2}[/tex] = 73507.5J

for f) 7.5 x [tex]1.2^{2}[/tex] = 10.8J

for i) 7.5 x [tex]50^{2}[/tex] = 18750J

To learn more about elastic potential energy,

https://brainly.com/question/19024537

Here is the answer for ur question

In the district soccer championship finals, Elizabeth kicks a 0.75 kg soccer ball with a force of 17.0 N. How much does she accelerate the soccer ball from rest in the process?

Answers

22.6m/s² will be the Acceleration needed by Elizabeth.

According to Newton's second law of motion, the force is equal to the product of the mass and acceleration of an object.

So the formula used will be,

F = ma

then, a = F/m

Where a is acceleration, F is force and m is the mass of the ball.

Then

a = 17/0.75 = 22.6

Learn more about acceleration Click here:

https://brainly.com/question/18595651

True/False: The rise in global temperatures over the last century can be explained by planetary motions

Answers

The rise in global temperatures over the last century can be explained by planetary motions that are false.

What is global temperature rise?

Global warming is an event where there is an increase in temperature in the atmosphere and the earth's surface (global temperature). An increase in temperature on earth will certainly have a considerable impact and cause a change in the ecological order of life.

Global warming occurs due to the process of increasing the average temperature of the atmosphere, sea, and earth's land. This phenomenon is triggered by human activities, especially those related to the use of fossil materials and land use change activities.

Learn more about Kepler's laws of planetary motion here :
https://brainly.com/question/12813684

#SPJ4

Students conducted a pendulum experiment to demonstrate the conservation of
energy principle. The diagram shows the pendulum at different points of its swing.
Which number(s) on the diagram would correspond to the point(s) of the pendulum's
swing with the least kinetic energy?

Answers

Answer:

1 and 5

Explanation:

Kinetic energy is the energy that an object possesses due to its motion. Since the pendulum has 0 velocity at points 1 and 5, and it is at those points that the pendulum is furthest from its equilibrium position, we say that it has no kinetic energy and maximum potential energy.

which cell componetes are reponsible for the inherited traits that a pea plant possesess

Answers

Answer:

DNA, nucleus, chromosomes

Other Questions
it is the example of an..... the american torture policys extent was not fully uncovered until the release of a senate committee report in 2014. this report showed that torture was used systematically at secret u.s. prisons around the world. the report also concluded, however, that an incredible amount of information was obtained from prisoners through the use of these brutal methods. i need helpCerise waters her lawn with a sprinkler that sprays water in a circular pattern at a distance of 15 feet from the sprinkler. The sprinkler head rotates through an angle of 300, as shown by the shaded area in the accompanying diagram.What is the area of the lawn, to the nearest square foot, that receives water from this sprinkler?Responsesa. 79 ft. 2b. 94 ft.2c. 707ft.2d. 589 ft.2 SOCIAL NETWORKINGWhich of the following is a security best practice when using social networking sites? trichomoniasis is a single-celled protozoan with whip-like flagella. which of the following is not a common symptom of trichomoniasis? Examine Fig. 21.1. Which of the following locations has the highest average annual number of lightning flashes per square km?Central Africa Seven percent of people receiving your email opened it. Two percent of people receiving your email clicked a link. Of those who opened the email, what percent clicked a link?. Help with is ixl please The bar graph below shows the regions in which all the passenger cars were produced during a recent year. What is thedifference between the number of passenger cars produced in Asia and the number producedin Eastern Europe/Russia?Latin AmericaNorth AmericaEastem Europe/RussiaAsiaWestem Europe0 24 6 8 10 12 14 16Cars produced (in millions) the reserve ratio, open-market operations, and the discount rate are tools of policy used by the fed to alter commercial bank reserves. multiple choice question when applied overhead is more than actual overhead, the journal entry made at the end of the period cost of goods sold. multiple choice question. has no effect on increases reduces dentify the grammatically correct sentence:answer choicesA.The citizens who were deemed average had lesser handicaps than others.B.The citizens who were deemed average had less handicaps than others.C.The citizens who were deemed average had fewer handicaps than others.D.The citizens who were deemed average had more fewer handicaps than others. can someone please help me Last week/ where/ Ann and Chris? WAS/ WERE Describe three ways in which your activities affect the environment. Are these effects positive or negative? A triangle has vertices at F (6, 3), G (3, 4), and H (1, 7). What are the coordinates of each vertex if the triangle is rotated 180 about the origin counterclockwise? Pls Help ASAP) Willing to give 25 points) Pls show your work) If you don't know pls don't answer. Write a for loop to print the numbers from 35 to 45, inclusive (this means it should includeboth the 35 and 45). The output should all be written out on the same line.Expected Output35 36 37 38 39 40 41 42 43 44 45 Reuben added 8 fish to his pond each day for 48 days. what was the total change in the number of fish in the pond (2,5) and (-4,2) in standard form