What is the KE of a 0.5 kg puffin flying at 22 m/s?

Natural selection, genetic drift, and gene flow are some of the mechanisms that cause changes in allele frequencies over time.

Over time, a population's gene pool might change due to evolution. This can be brought on by a variety of mechanisms, including mutations, natural selection, and genetic drift. As a result, the gene pool of the population is altered to better meet the needs of its particular environment.

The four main driving forces of evolution are mutation, natural selection, genetic drift, gene flow, and gene flow. New genetic variety is created by mutation in a gene pool. Genetic drift and gene flow alter the allele frequencies in a gene pool.

A population's gene pool can slowly change over time to produce new types of individuals, a process known as microevolution. Microevolutionary processes include changes in a species' size or color as well as bacteria that are no longer hurt by drugs.

To learn more about gene pool visit:

brainly.com/question/14505214

#SPJ4

The elasticity of the balloon's material keeps the 1particles from forcing it to expand. The material stretches as the gas particles bump against the sides, allowing the balloon to expand to a certain point before contracting again.

The elasticity of the balloon's material is an important factor in determining the balloon's shape and size. In general, the more elastic the material is, the more the balloon will be able to stretch and expand. When the material is not elastic enough, it will not be able to stretch and the balloon will remain in its original shape.

The elasticity of the material also affects the amount of air pressure within the balloon. A more elastic material will be able to hold more air pressure, while a less elastic material will not be able to hold as much pressure. This is why balloons with a higher pressure will usually be larger than balloons with a lower pressure.

Learn more about gas particles from a balloon to:

https://brainly.com/question/6751115

#SPJ4

A systematic error is one that constantly occurs in one direction, for as when a scale consistently overestimates everyone's weight by two pounds.

To know more about error here

https://brainly.com/question/28008941

#SPJ4

The angle turned in 5.26 s is 6470 degrees. An initial angular speed of 12.5 rad/s and a constant angular acceleration of 3.41 rad/s2 are the characteristics of a pulley.

The angular acceleration provides the rate of change of angular velocity, just like in the case of linear velocity and acceleration: The rate at which the angular velocity varies is determined by the angular acceleration's magnitude, and the change's direction is determined by the direction.

The rate at which angular velocity changes is referred to as angular acceleration. In an equation, angular acceleration is written as follows: = t, where t is the change in time and is the change in angular velocity.

To know more about angle turned visit:

brainly.com/question/29160335

#SPJ4

Swallow the soil it moves and Break the soil into smaller particles.

They don't have bones or other fixed features that might restrict their movement. The body of an earthworm is segmented. Earthworms use the setae, or tiny bristles, that are present on each segment, to assist them hold the dirt as they travel.

An earthworm uses two distinct sets of muscles to move. Longitudinal muscles run the length of the body, while circular muscles loop around each segment. The earthworm extends as a result of the circular muscles contracting, growing longer and thinner.

The earthworm embeds the front of its body in the dirt using its setae. The earthworm now contracts its longitudinal muscles, either making it shorter and wider.

Therefore, Swallow the soil it moves and Break the soil into smaller particles.

To learn more about Earthworm, refer to the link:

https://brainly.com/question/28690031

#SPJ1

Answer: Distance = 60 J / 20 N = 3 meters. So the car moved a distance of 3 meters.

Explanation: To determine how far the car moved, you need to know how long the force was applied. The equation for work is work = force * distance, so if you know the force and the work, you can solve for the distance. In this case, you know that the force applied was 20 N and the work done was 60 J, so you can calculate the distance by rearranging the equation to solve for distance: distance = work/force. Plugging in the values, you get distance = 60 J / 20 N = 3 meters. So the car moved a distance of 3 meters.

Important Formulas:

[tex]w=Fd[/tex]

work(measured in joules) = force(measured in newtons) * distance(measured in meters)

__________________________________________________________

Given:

[tex]w=60J[/tex]

[tex]F=20N[/tex]

[tex]d=?[/tex]

__________________________________________________________

Rearranging formula to make distance the subject:

[tex]w=Fd[/tex]

[tex]\dfrac{w}{F} =\dfrac{Fd}{F}[/tex]

[tex]d=\dfrac{w}{F}[/tex]

__________________________________________________________

Finding distance:
[tex]d=\dfrac{w}{F}[/tex]

[tex]d=\dfrac{60}{20}[/tex]

__________________________________________________________

[tex]\fbox{d = 3 meters}[/tex]

The increasing axon diameter increase the conduction velocity conduction in resistance capacitance because of the possibility of smooth movement of electrons in the capacitor and the smooth flow of charges in it that supports the electric current to flow in a smooth manner.

Capacitor is a body which is used to store the electricity in it and we can use it in the time when we need it in the circuit. also we can use the capacitor in the jumping the charge and electricity from the spark gap in the circuit to attain a good height and velocity as we needed it. by this information we can primarily consider that the increasing axon diameter increase the conduction velocity conduction in resistance capacitance because of the possibility of smooth movement of electrons in the capacitor and the smooth flow of charges in it that supports the electric current to flow in a smooth manner.

Learn more about capacitance:

brainly.com/question/12644355

#SPJ4

The variation with time of the kinetic energy E_k of the ball is that it decreases. This is because gravity is acting against the ball and slowing it down, so the kinetic energy is decreasing as the ball slows down.

When the ball is released, the initial kinetic energy, E_k, is given by the equation: E_k = mgh, where m is the mass of the ball, g is the gravitational acceleration, and h is the initial height of the ball. As the ball rises, its height increases, and the potential energy, U, increases. However, this increase in potential energy is at the expense of kinetic energy, so the kinetic energy decreases as the ball rises.  

When the ball reaches its maximum height, its kinetic energy is zero as it is at rest. As the ball then begins to fall, its potential energy decreases, and its kinetic energy increases. This is because the ball is falling under the action of gravity, and thus its kinetic energy increases as it accelerates downwards.  Overall, the kinetic energy of the ball decreases as it rises and increases as it falls.

This is due to the conservation of energy, which states that the total energy of a system remains constant. As the potential energy increases, the kinetic energy decreases, and vice versa.

To know more about  kinetic energy refer to the  link   brainly.com/question/26472013

#SPJ4

A decomposition chemical reaction caused by light is the decomposition of hydrogen peroxide.

It is represented by the following equation:

[tex]2 H_{2} O_{2}(aq)[/tex]  →  [tex]2 H_{2}O(l)[/tex] [tex]+ O_{2} (g)[/tex]

The decomposition of hydrogen peroxide is a chemical reaction in which hydrogen peroxide is broken down into its component parts: water and oxygen gas.

This reaction is typically caused by the absorption of light energy, which causes the chemical bonds within the hydrogen peroxide molecule to break.

This reaction is often used as a demonstration of the principles of light-induced decomposition reactions, as it is relatively simple and easy to observe.

Learn more about decomposition:

https://brainly.com/question/16987748

51.6 seconds long does it take a plane, traveling at a constant speed of 130 m/s, to fly once around a circle whose radius is 2650 m.

The time it takes for an object to travel once around a circle of radius r at a constant speed v can be found using the equation:

T = 2 x π x r ÷ v

where T is the time in seconds, pi is approximately 3.14, r is the radius of the circle in meters, and v is the speed of the object in meters per second.

Given a constant speed of 130 m/s and a radius of 2650 m, the time it would take for a plane to fly once around the circle would be:

T = 2 x π x 2650 m / 130 m/s

T = 51.6 sec

So, it would take approximately 51.6 seconds for a plane traveling at a constant speed of 130 m/s to fly once around a circle whose radius is 2650 m.

To know more about speed please refer: https://brainly.com/question/13608672

#SPJ4

The sun will become a red giant but it will not be a problem for humanity because the Earth will become inhabitable before that.

As per the research conducted it is said that the sun will eventually become a red giant and it engulf our planet Earth. The Earth will become extremely giant. This in turn will not become a problem for humanity, flora and fauna as the Earth will be completely inhabitable. All the forms of life will completely perish and no life form will exist. The planet will be engulfed by the red giant Sun. This is the reason it is not a problem for humanity.

Learn more about Sun:

brainly.com/question/17376727

#SPJ4

To determine the value of C, we can use the equation provided: V(x) = Cx^4/3, where x is the distance from the cathode. V(x) = C(13.6 mm)^4/3 = 264V. So, C = 264V / (13.6mm)^4/3

To obtain a formula for the electric field between the electrodes as a function of x, we can use the equation: Ex = -dV/dx

Substituting the equation for V(x) and the value of C obtained in part (a) into the equation:

Ex = -dV/dx = -(d/dx)(Cx^4/3) = -(4/3)Cx^(4/3)

To determine the force on an electron when the electron is halfway between the electrodes, we can use the equation: F = qE

where q is the charge of the electron and E is the electric field at that point. Since the force on an electron is equal to the electric field multiplied by the charge of the electron, we can substitute the value of E obtained in part (b) and the charge of the electron, 1.6 x 10^-19 C, into the equation

F = qE = (1.6 x 10^-19 C) * (-(4/3)C

Learn more about electric field from the given link.

brainly.com/question/19878202

#SPJ4

AB+CD+BC=AB+BC+CD=AD. It tells us that first traveling from A to B, then B to C, and from C to D is equivalent to directly traveling from           A to D

Vector addition is defined as the geometrical sum of two or more vectors as they do not follow regular laws of algebra.

There are a few conditions for any vector addition, they are:

There are two laws of vector addition, they are:

Triangle law of vector addition states that when two vectors are represented as two sides of the triangle with the order of magnitude and direction, then the third side of the triangle represents the magnitude and direction of the resultant vector.

To know more about Vector Addition:

https://brainly.com/question/2927458

#SPJ4

When labor is done, energy is transferred from the agent to the object, resulting in a change in the motion of the object (more specifically, a change in the object's kinetic energy).

Energy cannot be generated or destroyed, but it may be moved from one form to another. Energy may be altered in a variety of ways, such as when potential energy becomes kinetic energy or when one thing moves another.

Thermal energy is related to a system's internal energy because of its temperature. When a substance is heated, its temperature rises because its molecules begin to move faster, gaining thermal energy through heat transfer. Conduction, convection, and radiation are the three methods through which thermal energy is transferred.

Learn more about  energy to visit this link

https://brainly.com/question/1932868

#SPJ4

The number of electrons that move in a circuit where a current of 2.0 A flows for 2.0 minutes will be [tex]1.5X10^2^2[/tex]. The correct option is C.

Electrical charge carriers, often electrons or atoms deficient in electrons, travel as current. The capital letter I is a typical way to represent current.

A current of 2A passes through a wire for 20 minutes. The number of electrons that crossed the cross-section in this period is

Given that,

Current =2A

Time t= 20min = 20×60s

Let,

n and e be the number and charge of electrons in time t.

So,

The total charge, q(say) in the wire is

q = ne

Hence, the current flowing in time t is

I = q/t

I = ne/t

n = It/e

[tex]n=\frac{2(20X60)}{1.6X10^{-19}} \\\\n=\frac{2400}{1.6X10^{-19}}\\\\n=1.5X10^{22}[/tex]

Thus, the answer is [tex]1.5X10^2^2[/tex], means the correct option is C.

For more details regarding current, visit:

https://brainly.com/question/13076734

#SPJ1

Your question seems incomplete, the missing options are:

[tex]1.5X10^{21}\\\\1.5X10^{20}\\\\1.5X10^{22}\\\\1.5X10^{21}\\\\1.5X10^{23}[/tex]

In the table's Properties column, notably in the entry for the Guidance magnet, Rob made a mistake.

It is untrue to say that a quickly changing electromagnet's current propels a train forward. To create a levitation force that lifts the train off the tracks and enables it to float, the guidance magnets in a Maglev train really work by repelling the guiding magnets on the vehicle from the guideway.

In order to maintain the train's levitation and stability, the polarity of its steering magnets must change quickly rather than the current.

Superconducting magnets, which don't suffer any major energy losses when repelling another magnet, are frequently used in Maglev trains. Instead, a repelling force produced by the magnets lifts the train off the rails and enables it to float.

The mistake is that the guidance magnets should push the train ahead and increase friction, not by repelling the magnets on the train from the guideway and creating a levitation force.

To learn more about magnets visit:

brainly.com/question/2841288

#SPJ4

When the filtrate moves through the two arms of the Henle's loop in directions that are diametrically opposed, countercurrent occurs.

For the medullary interstitial fluid to remain at a high osmolarity, Henle's loop's ascending limb is essential. These two limbs' close companion, the vasa recta, similarly has two opposing orientations of function. The hand can be significantly cooled without losing body heat because the deep veins are wrapped around the arteries, and the counter-current flow that results from this short-circuits the loss of body heat.

Over the course of their full interaction, the counter-current exchange system may keep the gradient between the two flows practically constant. This can result in practically all of the property transferring if the length and flow rate are both sufficient.

To know more about countercurrent

https://brainly.com/question/28137052

#SPJ4

Stage and film versions of a drama are similar in that the audience must use context clues such as lighting, sound effects, and dialogue to infer the mood of a scene. This requires the audience to pay attention to the details of the performance, as subtle changes in these elements can drastically change the overall tone of the production.

The main difference between a stage and film version of a drama is that a stage production relies heavily on the physicality of the actors and their interactions with one another, while a film production relies heavily on the technical aspects such as camera angles, lighting, and sound design. Additionally, a stage production is performed live in front of an audience, while a film is created in a studio and viewed later by an audience.

Learn more about film versions:

https://brainly.com/question/20500638

#SPJ4

The magnetic field outside the solenoid [tex]B_{\text {out }}[/tex] is zero.

The magnetic field lines are present outside the solenoid, but there are significantly less of them there than there are inside the solenoid. This is known as the flux. As a result, the magnetic field outside is thought to be almost nil. It is more accurate to assume that the magnetic field outside the solenoid is zero if the solenoid is quite long. It is false close to the solenoid's edge. We consider the magnetic field outside the solenoid to be zero for practical purposes. This amount of flux divided by the area outside the solenoids gives the flux density, which is equal to the strength of the field outside the solenoid is zero.

To learn more about Solenoid :

https://brainly.com/question/9535280

#SPJ4

If you are going the same speed, the greater the vehicle, the greater the force of impact on the reacting body and greater the inertia of it and greater is its velocity.

Velocity of any body is the speed by which it is travelling along with the direction it has given. velocity is a vector quantity because it has both magnitude and direction. velocity has both magnitude and direction so it different from speed but its magnitude is same as that of speed and we can calculate both as their magnitude are equal. velocity is the measure of the speed of the moving body by which it is moving in the place from one place to another. velocity and speed are the same but they are different in the essence in the form of their type. speed is scalar and velocity is vector. by this primary information we can consider that primarily that if you are going the same speed, the greater the vehicle, the greater the force of impact on the reacting body and greater the inertia of it and greater is its velocity.

Learn more about Velocity:

brainly.com/question/18084516

#SPJ4

The formula for k in terms of the period T and the mass m in spring constant problem is k = 4π²m/T². The formula applies to a spring-mass system.

A spring-mass system is a system where a mass of object is attached at the free end of the spring. The system will perform a simple harmonic motion where the oscillations occur periodically. The period of any moving object in that motion can be counted as follows

T = 2π√(m/k)

Where

Find the formula for the spring constant k in terms of T and m!

We use the formula above to find k.

T = 2π√(m/k)

√(m/k) = T/2π

m/k = (T/2π)²

m/k = T²/4π²

k = 4π²m/T²

Hence, the formula for the spring constant in the spring-mass system is k = 4π²m/T². The answer is A.

Learn more about spring mass system here:

brainly.com/question/9434528

#SPJ4

Answer:

Below

Explanation:

Use law of conservation of momentum

 momentum before crash = momentum of the system after crash

     3600 kg  * 21  m/s    =  (3600+ x ) * 9

        solve for x = 4800 kg

The changes in the momentum of the ball and the time over which that change occurs. The formula for average force is: average force = change in momentum/time.

Given: The ball's mass is 0.144 kilogram.

speed v = 38 m/s, shift in momentum presently

P = m v- ( - mv) ( - mv)= 2 mv

=2 x (0.144) x (38) (38)

= 10.944 kg-m/s

t Impulse J=F.

The impulse is equivalent to the change in momentum.

J = 10.944 kg-m/s

Think about how a baseball bat and a ball interact, for instance. The bat forces the ball to the right while the baseball forces the bat to the left. The action-reaction force pair is made up of these two forces acting on two different objects combined.

to know more about force here:

https://brainly.com/question/29781083

#SPJ4

Pitch a baseball horizontally at 38.0 m/s weighing 0.144 kg. The baseball moves in the opposite direction and at the same speed after being struck by the bat. What is the ball's change in momentum? What kind of impetus does the bat deliver? What was the average force the bat applied to the ball during the 0.80 milliseconds that they were in contact?

The rate at which an object's position changes when observed from a specific point of view and when measured against a specific unit of time is known as its velocity.

Velocity is the direction at which an object is moving and serves as a measure of the rate at which its position is changing as seen from a specific point of view and as measured by a specific unit of time (for example, 60 km/h northbound).

By dividing the amount of time it took the object to go a certain distance by the overall distance, one can calculate the object's initial velocity. V is the velocity, d is the distance, and t is the time in the equation V = d/t.

An object's velocity can alter depending on whether it moves faster or slower or in a different direction. An object can move faster, slower, or remain stationary by being pushed or pulled in one direction or the other. Or to put it another way, a thing moves because of a force. Gravity and friction both act as sorts of forces that affect how an object moves.

Therefore, the correct answers are:

a) 75 m/s

b) 1.4 x 103m/s2

c) 2.8 x 103N

d) 75 m/s tangential object flight.

To learn more about velocity refer to:

https://brainly.com/question/25749514

#SPJ1

If Jada has 25 dimes, she has 10 quarters .

Dime is a coin from the United States or Canada which has value of ten cents.

And. quarter is a coin from the United States or Canada which has value of twenty five cents.

Jada has 25 dimes .

Now, we know that 1 dime is equals to 10 cents.

Hence, Jada has = 25 × 10 cents = 250 cents.

Again we know that 1 quarter is worth 25 cents.

So, Jada has = (250 ÷ 25) quarters

= 10 quarters.

Hence, she has 10 quarters.

Learn more about dimes here:

https://brainly.com/question/14534255

#SPJ1

If two blocks are connected by a string of negligible mass that passes over massless pulleys, the system can be analyzed using the principles of Newton's second law and the conservation of energy.

In this scenario, the net force acting on each block is the tension in the string, which is equal in magnitude for both blocks.

Therefore, if the blocks have different masses, they will have different accelerations.

In this scenario, the mechanical energy of the system is the sum of the gravitational potential energy and the kinetic energy of the blocks. If the pulleys are massless and frictionless, then the mechanical energy of the system will be conserved.

In summary, the two blocks will move together with the same acceleration if the pulleys are massless and frictionless.

To know more about pulleys:

https://brainly.com/question/30189162

#SPJ4

If two blocks are connected by a string of negligible mass that passes over massless pulleys, the system can be analyzed using the principles of Newton's second law and the conservation of energy.

To learn more about newtons second law refer:

brainly.com/question/25545050

#SPJ4

The 10/π ms² turns (revolutions) the particle make in 1 minute.

Whereas rotation involves travelling around the axis, occurs when one body moves around another. As an illustration, the Moon orbits the Earth, and the Earth revolves around the Sun.

Paul Dirac and other researchers found that the concept could be applied to electrons and everything else in addition to photons, the unit of light called a quanta: Particles are thought to be excitations of quantum fields that are present throughout space, according to quantum field theory.

When the particle completes half revolution change in velocity

Δv=[5−(−5)]m/s=10m/s

Time taken to complete the half revolution is

t = πr/ v

 = π *5 / 5

 = πs

Thus, average acceleration = Δv / t

                                             = 10/π ms²

Therefore, the 10/π ms² urns (revolutions) does the particle make in 1 minute.

Learn more about revolution from the given link.

https:/brainly.com/question/16533738

#SPJ4

90.23 % percentage of the total energy was used to melt the ice.

Energy is the quantitative property that is transferred to a body or to a physical system, recognizable in the performance of work and in the form of heat and light. Energy is a conserved quantity—the law of conservation of energy states that energy can be converted in form, but not created or destroyed.

Total energy used from -[tex]14^{o}[/tex]C  to [tex]11^{o}[/tex]C

= [tex]m_{i}c_{i} T_{i}[/tex] + [tex]m_{i} L_{f}[/tex] +[tex]m_{w} c_{w}[/tex]Δ[tex]T_{2}[/tex]

= (0.013×2200×8) + (0.031×334000) + (0.013×486×11)

= 400.4 + 4342 + 69.498

= 4811.898 J

% energy used to melt = 4342/4811.898 × 100

= 90.23 %

To know more about energy visit :

brainly.com/question/1932868

#SPJ4

The two energy sources that are used in homes the most are electricity and natural gas. Natural gas is a non-renewable energy source, whereas electricity that is generated from unconventional sources is.

Sunlight, water, wind, and geothermal sources like hot springs and fumaroles are examples of renewable resources. Petroleum and coal are examples of fossil fuels that are non-renewable resources. The majority of renewable resources have small carbon footprints and low carbon emissions.

A well-built and securely sealed thermal envelope, controlled ventilation, appropriately sized, high-efficiency heating and cooling systems, and energy-efficient doors, windows, and appliances are the essential components of the majority of energy-efficient homes, despite construction costs, options, and styles being different.

To learn more about renewable energy visit:

brainly.com/question/17373437

#SPJ1