What is the mass of 1.84 mol NaCl? Give your
answer to the correct number of significant
figures. (Molar mass of NaCl = 58.44 g/mol)

1.84 mol NaCl =

Answer:

3 valence electrons

Explanation:

Let us first find the amount increased for everything.

From 1st to 2nd,  1048 - 620 = 428

428 increased from 1st to 2nd.

From 2nd to 3d, 2144 - 1048 = 1096

1096 increased from 2nd to 3rd.

From 3rd to 4th, 8724 - 2144 = 6580

6580 increased from 3rd to 4th.

From 4th  to 5th, 10141 - 8724 = 1417

From 3rd to 4th,  it increased the most. Therefore, we assume that those are the beginning core electrons and not valence electrons. Also, starting from 3rd, they are all core electrons.

For the 1st and 2nd,  we can assume they are valence electrons because the kJ/mol didn't increase that much.

Since the core electrons started from the 3rd, we most likely have 3 valence electrons.

So the final answer is 3.

Hope it helped!

Answer:

1)A mixture that is easily separated, the components are different sixes and unevenly mixed.

Explanation:

Mixtures are impure substances with usually indefinite composition. Their constituents often retains their identities. They can easily be separated into constituents by physical methods.

Homogenous mixtures have their constituents existing in only one phase.

Heterogeneous mixtures have their constituents existing in at least two different phases.

Answer:

True? The don't stay exactly still i dont think, but i'd say true.

Explanation:

Answer:

TRUE

Explanation:

In a solid, atoms are packed tightly together and move very slowly. In fact, they do not flow at all: they simply vibrate back and forth.

Key words vibrate, not movement.

Correct me if I'm wrong of course

Answer:

[tex]C_3H_6[/tex]

Explanation:

Hello!

In this case, since the empirical formula is the smallest representation of the molecular formula, it is known that the times in which the empirical formula is into the molecular formula is a whole number and is computed by dividing the molar mass of the molecular formula by that of the empirical formula as shown below:

[tex]\frac{42.08g/mol}{12.01+1.01x2}= \frac{42.08g/mol}{14.03g/mol}=3[/tex]

Thus, the molecular formula times the empirical formula by 3 to obtain:

[tex]C_3H_6[/tex]

Regards!

Mass of Barium chloride produced : 2666.56 g

Given

Reaction

6 NaCl + Ba3(PO4)2 → 2 Na3PO4 + 3 BaCl2

1500 g of sodium chloride

Required

Barium chloride produced

Solution

mol NaCl (MW= 58.5 g/mol) :

mol = mass : MW

mol = 1500 g : 58.5 g/mol

mol = 25.64

mol Barium chloride-BaCl2 based on mol NaCl(as a limiting reactant)

From the equation, mol ratio NaCl : BaCl2 = 6 : 3, so mol BaCl2 :

[tex]\tt \dfrac{3}{6}\times 25.64=12.82[/tex]

mass BaCl2(MW=208 g/mol) :

mass = mol x MW

mass = 12.82 x 208

mass = 2666.56 g

Answer:

there's just a lot of drama around grumpy trumpy's StOlEN eLecTiOn which are all just fake claims. all his hardcore followers are brainwashed into believing anything he says, so people (especially people who are inside the capitol) fear that trump's followers might incite violence AGAIN even after they broke into the Capitol on the 6th.

That's why they have the National Guard and thousands of people to keep the building secure during Biden's Inauguration.

hope this helps!

Answer:

NO I DON'T ✌✌✌✌✌✌✌✌✌

Answer:      what grade are u in ill help

Explanation:

Mendeleev arranged the known elements in his periodic table according to atomic number (option D).

Periodic table is a tabular chart of the chemical elements according to their atomic numbers so that elements with similar properties are in the same group (column).

The chemical elements are organized by atomic number, from the element with the lowest atomic number, hydrogen, to the element with the highest atomic number, oganesson.

Dmitri Mendeleev is the Russian scientist that formulated the periodic table of chemical elements and arranged them in order of increasing atomic number.

Learn more about periodic table at: https://brainly.com/question/11155928

#SPJ1

Answer: C.

Explanation:

according to atomic mass

Answer:

MP hippopotamus

Explanation: I'm in the fifth grade so yeah I really don't know this so I'm just going to say some random stuff and white cheddar mac and cheese warm TV perfect back MD 11443 to 2885 eleven 12:20 to 11 132 0.24 answer

Answer:

The answer is Evolution.

Evolution is a process that results in changes in the genetic material of a population over time. Evolution reflects the adaptations of organisms to their changing environments and can result in altered genes, novel traits, and new species.

Answer:

6.208 mol

Explanation:

Mass of Bromine Liquid = 496g

Number of moles = ?

Relationship between number of moles and mass is given as;

Number of moles = Mass / Molar mass

Molar mass of Bromine = 79.9g

Number of moles = 496 / 79.9 = 6.208 mol

Answer:

Here is your answer......

Answer: The answer is 2 and 4

Answer: B

Explanation: Some types of waves are able to travel through space. Some can even travel through solids and liquids.

Answer:

1. nitrous oxide

2. copper sulfide

3. cl2o7

4. MgBr2

Explanation:

hope it helps

Answer:The potential energy of the shared elec- trons is lower in the bond than it would be if the electrons were not shared between two nuclei

Explanation:

The entire essence of chemical combination is the attainment of a lower potential energy.

When two atoms are isolated at a large distance from each other, the potential energy is high.

However as the nuclei of the two atoms approach each other, the potential energy decreases until a minimum is attained. The distance between the nuclei at this point is the bond distance.

Hence, the potential energy of the shared electrons is lower in the bond than it would be if the electrons were not shared between two nuclei.

Answer:

674.26 g of AlI₃

Explanation:

We'll begin by calculating the theoretical yield of aluminum (Al). This can be obtained as follow:

Percentage yield of Al = 67.8%

Actual yield of Al = 30.25 g

Theoretical yield of Al =?

Percentage yield = Actual yield /Theoretical yield × 100/

67.8% = 30.25 / Theoretical yield

67.8 / 100 = 30.25 / Theoretical yield

0.678 = 30.25 / Theoretical yield

Cross multiply

0.678 × Theoretical yield = 30.25

Divide both side by 0.678

Theoretical yield = 30.25 / 0.678

Theoretical yield of Al = 44.62 g

Next, we shall determine the mass of AlI₃ that reacted and the mass of Al produced from the balanced equation. This can be obtained as follow:

AlI₃(s) + 3K(s) → 3KI(s) + Al(s)

Molar mass of AlI₃ = 27 + (3×127)

= 27 + 381 = 408 g/mol

Mass of AlI₃ from the balanced equation = 1 × 408 = 408 g

Molar mass of Al = 27 g/mol

Mass of Al from the balanced equation = 1 × 27 = 27 g

Summary:

From the balanced equation above,

408 g of AlI₃ reacted to produce 27 g of Al.

Finally, we shall determine the mass of

AlI₃ required to produce 44.62 g of Al. This can be obtained as follow:

From the balanced equation above,

408 g of AlI₃ reacted to produce 27 g of Al.

Therefore, Xg of AlI₃ will react to produce 44.62 g of Al i.e

Xg of AlI₃ = (408 × 44.62)/27

Xg of AlI₃ = 674.26 g

Thus, 674.26 g of AlI₃ is needed for the reaction.

Answer:

two electrons.... oxygen needs two electrons to attain stability

Answer:

All ions must a overall charge

Explanation:

Answer:

i belive its B

Explanation:

Answer:

3.746 g/mL

Explanation:

Mass of metal =  15.36 g

Initial Volume = 30.0 mL

Final Volume = 34.1 mL

Volume of metal = Final Volume - Initial Volume = 34.1 mL - 30.0 mL

Volume of metal = 4.1 mL

Density = ?

The relationship between the values is given as;

Density = Mass of metal / Volume of metal

Inserting the values;

Density = 15.36 / 4.1  = 3.746 g/mL

The density of the piece of metal is 3.746 g/ml.

Given the mass of metal is 15.36 g

The initial volume of a cylinder is 30.0 ml

The final volume after putting metal in it is 34.1ml

Step 1-  To find the volume:

The volume of metal = Final Volume – Initial Volume 30.0 mL

Volume of metal = 34.1 – 30.0 = 4.1 ml

Volume of metal = 4.1 mL

Step 2- Find the Density:

Density = Mass of metal is divided by the Volume of metal

[tex]\bold{Density = \dfrac{15.36 }{4.1} =3.746 g/ml}[/tex]  

Thus, the density is 3.746 g/ml.

Learn more about density, here:

https://brainly.com/question/952755

Answer:

_ NH4NO3 -> _ N2O + 2 H2O

Explanation:

By having 2 water molecules, we reach the 4 H atoms and 3 O atoms that are present on the left side. We don't add any other coefficients because we already have enough N atoms and we don't have to manipulate the left side at all.

When Silicone is altered with Phosphorus, 4 of its electrons form covalent bonding and the 5th electron becomes delocalized and thus it increases electrical conduction

Answer:

blue blah blue blah

Explanation:

Answer: b!

Explanation:

Answer:  Approximately [tex]0.267 \frac{\text{J}}{\text{g}^{\circ}\text{C}}[/tex]

===================================================

Work Shown:

We have the following variables

note: the symbol [tex]\Delta[/tex] is the uppercase Greek letter delta. It represents the difference or change in a value.

Apply those values into the formula below. Solve for c.

[tex]Q = m*c*\Delta t\\\\714 = 52*c*51.5\\\\714 = 52*51.5*c\\\\714 = 2678*c\\\\2678*c = 714\\\\c = \frac{714}{2678}\\\\c \approx 0.26661687826737\\\\c \approx 0.267\\\\[/tex]

The specific heat of the unknown metal is roughly [tex]0.267 \frac{\text{J}}{\text{g}^{\circ}\text{C}}[/tex]

Answer:

3645.46

Explanation:

calculated

Answer:

40 kilograms of fuel are required to meet their energy needs for the month of April.

Explanation:

The month of April has 30 days and the full energy needed by the family is determine by the following combustion formula, derived from dimension analysis:

[tex]n\cdot Q = m\cdot L_{c}[/tex] (1)

Where:

[tex]m[/tex] - Mass of the fuel, measured in kilograms.

[tex]L_{c}[/tex] - Calorific value of the fuel, measured in kilojoules per kilogram.

[tex]Q[/tex] - Daily fuel energy, measured in kilojoules.

[tex]n[/tex] - Number of days of the month, dimensionless.

If we know that [tex]Q = 20000\,kJ[/tex], [tex]n = 30[/tex] and [tex]L_{c} = 15000\,\frac{kJ}{kg}[/tex], then the amount of fuel required to meet their energy needs for the month of April is:

[tex]m = \frac{n\cdot Q}{L_{c}}[/tex]

[tex]m = \frac{(30)\cdot (20000\,kJ)}{15000\,\frac{kJ}{kg} }[/tex]

[tex]m = 40\,kg[/tex]

40 kilograms of fuel are required to meet their energy needs for the month of April.

Answer:

Fluorine

Explanation:

These particles stick in the atoms and make them radioactive.

Answer:

10.80 g of H2

Explanation:

As per the equation, let us calculate the mole ratio. N2+3H2→2NH3. As per the equation one mole of nitrogen

Answer:

becous thear are two products

Explanation:

The statement is "Because there is only on reactant."

Reactant are raw materials that react with one another and form products.

What is decomposition reaction?

A decomposition reaction can be defined as a chemical reaction in which one reactant breaks into two or more product.

Hence the correct explanation about the reaction is "because there is only one reactant"

To know more about reactant here

https://brainly.com/question/17096236

#SPJ2