What is the pressure in bar of a 4.50 L tank with 3.35 moles of oxygen at 39.3 °C? R = 0.08314 L･bar/mol･K.

External exposure to Cobalt-60 can raise the chance of developing cancer, since it decays via gamma radiation.

A limited amount of Co-60 that is consumed is absorbed by the liver, kidneys, and bones; the most of it is expelled in feces. Internal gamma radiation exposure from cobalt-60 exposure can result in cancer if it is absorbed by the liver, kidneys, or bone tissue.

An external dose substantial enough to produce skin burns and cancer, severe radiation illness, or death might come from improper handling of a sizable industrial source of Co-60.

Learn more about cobalt, here:

https://brainly.com/question/9851418

#SPJ1

Answer: C. Stays the same

Explanation:

Increasing the amount of fiber in a product does not directly affect the total amount of carbohydrates in the product. Fiber is a type of carbohydrate that is not fully digested by the body, so it is not counted as a part of the total carbohydrate content. Therefore, increasing the fiber content would not change the total carbohydrates in the product.

The chemical formulas for the ions and compounds you listed:

Copper (II) ion: Cu²⁺

Bromide ion: Br⁻

Magnesium ion: Mg²⁺

Phosphide ion: P³⁻

Copper (I) Bromide: CuBr

Sulfur Dichloride: SCl₂

Barium Fluoride: BaF₂

Magnesium Phosphate: Mg₃(PO₄)₂

Lithium Permanganate: LiMnO₄

Strontium Sulfite: SrSO₃

Nitrogen Monoxide: NO

Diselenium Tetraoxide: Se₂O₄

Aluminum Sulfide: Al₂S₃

Tin (IV) Iodide: SnI₄

Beryllium Oxide: BeO

Potassium Hydroxide: KOH

Copper (II) ion: Cu²⁺

Copper (II) ion has a charge of 2+ and is represented by Cu²⁺. This means that copper has lost two electrons, resulting in a 2+ charge.

Bromide ion: Br⁻

The bromide ion has a charge of 1- and is represented by Br⁻. This means that bromine has gained one electron, resulting in a 1- charge.

Magnesium ion: Mg²⁺

The magnesium ion has a charge of 2+ and is represented by Mg²⁺. This means that magnesium has lost two electrons, resulting in a 2+ charge.

Phosphide ion: P³⁻

The phosphide ion has a charge of 3- and is represented by P³⁻. This means that phosphorus has gained three electrons, resulting in a 3- charge.

Copper (I) Bromide: CuBr

Copper (I) bromide is a compound formed by combining copper (I) ion (Cu⁺) and bromide ion (Br⁻). The charges of the ions balance each other, resulting in a neutral compound.

Sulfur Dichloride: SCl₂

Sulfur dichloride is a compound consisting of one sulfur atom (S) and two chlorine atoms (Cl). The subscript "2" indicates the presence of two chlorine atoms.

Barium Fluoride: BaF₂

Barium fluoride is a compound composed of one barium ion (Ba²⁺) and two fluoride ions (F⁻). The charges of the ions balance each other, resulting in a neutral compound.

Magnesium Phosphate: Mg₃(PO₄)₂

Magnesium phosphate is a compound consisting of one magnesium ion (Mg²⁺) and two phosphate ions (PO₄³⁻). The charges of the ions balance each other, resulting in a neutral compound. The subscript "3" indicates the presence of three magnesium ions, and the subscript "2" indicates the presence of two phosphate ions.

Lithium Permanganate: LiMnO₄

Lithium permanganate is a compound composed of one lithium ion (Li⁺) and one permanganate ion (MnO₄⁻). The charges of the ions balance each other, resulting in a neutral compound.

Strontium Sulfite: SrSO₃

Strontium sulfite is a compound consisting of one strontium ion (Sr²⁺) and one sulfite ion (SO₃²⁻). The charges of the ions balance each other, resulting in a neutral compound.

Nitrogen Monoxide: NO

Nitrogen monoxide is a compound composed of one nitrogen atom (N) and one oxygen atom (O). Since the compound does not contain ions, it is represented by its elemental symbols.

Diselenium Tetraoxide: Se₂O₄

Diselenium tetraoxide is a compound consisting of two selenium atoms (Se) and four oxygen atoms (O). The prefix "di-" indicates the presence of two selenium atoms.

Aluminum Sulfide: Al₂S₃

Aluminum sulfide is a compound composed of two aluminum ions (Al³⁺) and three sulfide ions (S²⁻). The charges of the ions balance each other, resulting in a neutral compound. The subscript "

2" indicates the presence of two aluminum ions, and the subscript "3" indicates the presence of three sulfide ions.

Tin (IV) Iodide: SnI₄

Tin (IV) iodide is a compound formed by combining tin (IV) ion (Sn⁴⁺) and iodide ion (I⁻). The charges of the ions balance each other, resulting in a neutral compound.

Beryllium Oxide: BeO

Beryllium oxide is a compound composed of one beryllium ion (Be²⁺) and one oxygen ion (O²⁻). The charges of the ions balance each other, resulting in a neutral compound.

Potassium Hydroxide: KOH

Potassium hydroxide is a compound consisting of one potassium ion (K⁺) and one hydroxide ion (OH⁻). The charges of the ions balance each other, resulting in a neutral compound.

For more question on ions click on

https://brainly.com/question/1310794

#SPJ11

The molecule shown is a triglyceride which is a solid at room temperature.

A triglyceride is an ester made of three fatty acids and glycerol. The primary components of body fat in humans, other vertebrates, and vegetable fat are triglycerides.

Triglycerides are an important source of energy for the body and are used to store excess energy in adipose tissue. When the body needs energy, triglycerides are broken down into fatty acids and glycerol and released into the bloodstream to be used by the cells.

Learn more about triglycerides at: https://brainly.com/question/5028914

#SPJ1

The responses that can be included are : matter is any substance that has mass and takes up space, matter can be identified using physical properties, such as density and the boiling and melting points, matter can be identified based on chemical properties such as reactivity, flammability, and composition.

Matter is any substance that has mass and takes up space. This is a fundamental characteristic of matter, distinguishing it from non-material entities. Matter can be identified using physical properties such as density. Density is the measure of how much mass is contained in a given volume of a substance. Additionally, the boiling and melting points of matter can also be used to identify it. These points represent the temperatures at which matter changes from one state to another (e.g., from a solid to a liquid or from a liquid to a gas). Matter can also be identified based on its chemical properties. Chemical properties include reactivity, which refers to how a substance interacts with other substances; flammability, which indicates the ability to burn or ignite; and composition, which refers to the types and proportions of elements or compounds present in a substance. These characteristics and properties help scientists categorize and understand different forms of matter, enabling them to study and manipulate it for various purposes, such as in chemistry, physics, and engineering.

For such more questions on flammability

https://brainly.com/question/2583069

#SPJ11

When popcorn kernels are heated, the water vapor inside them begins to expand rapidly due to the increase in temperature.

This causes pressure to build up inside the kernel until it reaches a point where the outer shell of the kernel cannot contain it any longer. As a result, the kernel explodes and the steam is released, causing the corn to pop and expand into a fluffy white shape that we know and love. This process of heating and expanding is known as "popping." Popcorn is the only variety of corn that pops because it has a hard, impermeable outer shell that traps the steam inside. Other types of corn do not have this same structure and do not contain enough water to create the necessary pressure for popping. Interestingly, the size of the container in which the popcorn is popped does not affect the popping process itself. As long as the heat source is sufficient and the kernels are exposed to it for the right amount of time, they will pop regardless of the container's size. However, a larger container may affect the overall quality and texture of the popcorn due to variations in heat distribution and air circulation.

for more questions on  temperature

https://brainly.com/question/4735135

#SPJ11

Answer:C. In Honolulu, the Buffalo Soldiers broke down some racial barriers and endured dangerous working conditions to build the Mauna Loa Trail.

Explanation:

Based on the given options, the statement that best reflects the development of the central idea of the text is: "C"

This statement highlights the central idea that the Buffalo Soldiers played a significant role in the construction of the Mauna Loa Trail, overcoming racial barriers and facing challenging working conditions in Honolulu.

Answer:

1. i think 1. What is the electron arrangement for a boron ion?

2.boron atom contains five protons, five neutrons, and five electrons.

Explanation:

1. The rms speed of O₂ molecules at 427 K is 576.9 m/s

2. The rms speed of He atoms at 427 K is 1631.7 m/s

The rms speed of the various elements can be obtained as follow:

1. For O₂ molecules

rms speed = √(3RT / μ)

rms speed of O₂ molecules = √(3 × 8.314 × 427 / 0.032)

rms speed of O₂ molecules = 576.9 m/s

2. For He atoms

rms speed = √(3RT / μ)

rms speed of He atoms = √(3 × 8.314 × 427 / 0.004)

rms speed of He atoms = 1631.7 m/s

Learn more about rms speed:

https://brainly.com/question/4413278

#SPJ1

Answer: Cobalt-60 was discovered by accident.

Explanation: In 1935, Emilio Segrè and Carlo Perrier were studying the bombardment of cobalt with neutrons when they discovered that it produced a new radioactive isotope, cobalt-60. This discovery was significant because it was the first time that a man-made radioactive isotope had been created.

The balanced equation of the redox reaction is given as follows:

The balanced equation of the reaction is determined using the half-reaction method.

The given equation of the redox reaction is:

H₆TeO₆ + Br₂ ----> TeO₂ + BrO₃⁻

Reduction half-reaction:

H₆TeO₆ → TeO₂

The oxidation state of Te changes from +6 to +4, showing that it has lost gained electrons.

H₆TeO₆ → TeO₂ + 2e⁻

Oxidation half-reaction:

Br₂ → BrO₃⁻

The oxidation state of Br changes from 0 to +5, showing that it has lost five electrons.

Balancing the electrons transferred and the atoms by adding electrons, H₂O, and H⁺ to the appropriate sides:

Br₂ + 6 H₂O → 2 BrO₃⁻ + 12 H⁺ + 10 e⁻

The number of electrons transferred in both half-reactions balanced is  by multiplying the oxidation half-reaction by 5 and the reduction half-reaction by 2:

5 (H₆TeO₆ → TeO₂ + 2 e⁻) → 5 H₆TeO₆ → 5 TeO₂ + 10 e⁻

2 * (Br₂ + 6H₂O → 2 BrO₃⁻ + 12 H⁺ + 10e⁻) → 2 Br₂ + 12 H₂O → 4 BrO₃⁻ + 24 H⁺ + 20 e⁻

The two half-reactions are added together and the electrons are canceled out to obtain the balanced redox reaction:

5 H₆TeO₆ + 2 Br₂ + 12 H₂O → 5 TeO₂ + 4 BrO₃⁻ + 24 H⁺

Learn more about redox reactions at: https://brainly.com/question/21851295

#SPJ1

To determine the volume of water, we need to account for the density of water, which changes with temperature. However, at 25.4°C, the density of water is close enough to 1 g/mL for practical purposes. Therefore, we can approximate the volume of water to be the same as its mass.

Given:

Mass of water = 19.5487 g

Volume of water = Mass of water

Therefore, the volume of water is approximately 19.5487 mL.

7 years is the approximate age of the wooden artifact.

To determine the approximate age of the wooden artifact, we can use the concept of carbon dating. Carbon dating relies on the decay of carbon-14 (C-14) in organic materials to estimate their age.

The half-life of carbon-14 is approximately 5770 years. This means that after each half-life period, the amount of C-14 in a sample decreases by half. By measuring the remaining amount of C-14 in the sample, we can estimate its age.

Given that the wooden artifact contains 7 grams of carbon and the rate of decay is 1 disintegration per minute per gram (dpm/g), we can calculate the age as follows:

Convert the decay rate to the rate of disintegrations per minute for the entire sample:

Decay rate for the entire sample = decay rate per gram × sample mass

Decay rate for the entire sample = 1 dpm/g × 7 g = 7 dpm

Calculate the number of half-lives that have occurred:

Number of half-lives = (decay rate for the entire sample) / (decay rate per half-life)

Number of half-lives = 7 dpm / (1 dpm/g × 5770 years) = 7 / 5770

Calculate the age of the artifact:

Age = (number of half-lives) × (half-life of carbon-14)

Age = (7 / 5770) × 5770 years = 7 years

Therefore, the approximate age of the wooden artifact, based on the given information, is approximately 7 years.

It's important to note that this simplified calculation assumes a constant decay rate over time and neglects other factors that may affect the accuracy of carbon dating, such as contamination and variations in C-14 production rates. Carbon dating is most reliable for materials up to around 50,000 years old.

Know more about Carbon dating here:

https://brainly.com/question/15673495

#SPJ11

A. Approximately 586.52 grams of carbon dioxide are produced at the same time as 360 grams of water vapor in the burning of ethane.

B. Approximately 45.79 grams of sodium carbonate (Na2CO3) would be required to produce 85 grams of barium carbonate (BaCO3) when reacting with excess barium sulfate (BaSO4).

PART A:

To determine the amount of carbon dioxide produced when burning ethane, we need to know the balanced chemical equation for the combustion reaction. The balanced equation for the combustion of ethane (C2H6) is as follows:

2 C2H6 + 7 O2 -> 4 CO2 + 6 H2O

From the balanced equation, we can see that 2 moles of ethane produce 4 moles of carbon dioxide. Therefore, the ratio is 2 moles of ethane to 4 moles of carbon dioxide.

Now, let's convert the given mass of water vapor (360 g) to moles. The molar mass of water (H2O) is approximately 18 g/mol, so:

360 g H2O * (1 mol H2O / 18 g H2O) = 20 mol H2O

According to the balanced equation, 6 moles of water (H2O) are produced for every 4 moles of carbon dioxide (CO2). Therefore, the ratio is 6 moles of water to 4 moles of carbon dioxide.

Since we know that 20 moles of water vapor were produced, we can use the ratio to determine the moles of carbon dioxide produced:

20 mol H2O * (4 mol CO2 / 6 mol H2O) = 13.33 mol CO2

To convert moles of carbon dioxide to grams, we need to multiply by the molar mass of carbon dioxide, which is approximately 44 g/mol:

13.33 mol CO2 * 44 g CO2/mol = 586.52 g CO2

PART B:

To determine the amount of sodium carbonate (Na2CO3) required to produce 85 g of barium carbonate (BaCO3), we need to consider the balanced chemical equation for the reaction between sodium carbonate and barium sulfate. The balanced equation is as follows:

Na2CO3 + BaSO4 -> BaCO3 + Na2SO4

From the balanced equation, we can see that 1 mole of sodium carbonate produces 1 mole of barium carbonate. Therefore, the ratio is 1 mole of sodium carbonate to 1 mole of barium carbonate.

Now, let's convert the given mass of barium carbonate (85 g) to moles. The molar mass of barium carbonate (BaCO3) is approximately 197 g/mol, so:

85 g BaCO3 * (1 mol BaCO3 / 197 g BaCO3) ≈ 0.431 mol BaCO3

According to the balanced equation, the ratio of sodium carbonate to barium carbonate is 1:1. Therefore, we would need approximately 0.431 moles of sodium carbonate.

To convert moles of sodium carbonate to grams, we need to multiply by the molar mass of sodium carbonate, which is approximately 106 g/mol:

0.431 mol Na2CO3 * 106 g Na2CO3/mol ≈ 45.79 g Na2CO3

For more question on carbon dioxide click on

https://brainly.com/question/25385913

#SPJ11

The weight of the oil droplet suspended between two charged plates in Millikan's experiment was equal to the gravitational force acting on the droplet.

The weight of the oil droplet suspended between two charged plates in Millikan's oil drop experiment was equal to the gravitational force acting on the droplet. By carefully controlling the electric field and measuring the droplet's motion, Millikan was able to determine the charge of an electron.

The experiment involved observing the motion of oil droplets in an apparatus where the droplets were allowed to fall through a small hole and then become suspended between two charged plates. By applying an electric field to the plates, the droplets could be held in equilibrium against gravity.

By measuring the electric field strength required to balance the gravitational force on the droplet and knowing the mass of the droplet, Millikan was able to calculate the charge of the droplet, which was found to be a multiple of the elementary charge, corresponding to the charge of a single electron.

for more such questions on experiment

https://brainly.com/question/24795637

#SPJ11

Answer:

[tex]\huge\boxed{\sf M = 0.06\ M}[/tex]

Explanation:

No. of moles = n = 0.03 mol

Volume = v = 500 ml = 0.5 L

Molarity = M = ?

M = n / v

Put the given data in the above formula.

M = 0.03 / 0.5

[tex]\rule[225]{225}{2}[/tex]

Answer:

1.43 mol of H2

Explanation:

create the balanced equation:

2Al +6HCl to 2AlCl3 + 3H2

from the equation you can see that 2 mols of Al react with 3 mols of H2. so if you have .95 mols of H2 it is (0.95 mol Al)x(3 mol H2/ 2 mol Al)= 1.43 mol of H2

The mixing of acetic acid with sodium acetate will produce a buffer solution with a pH value is > 7.0, hence option B is correct.

The pH scale determines how acidic or basic water is. The range is 0 to 14, with 7 representing neutrality.

Acidity is indicated by pH values below 7, whereas baseness is shown by pH values above 7. In reality, pH is a measurement of the proportion of free hydrogen and hydroxyl ions in water.

When sodium acetate is added to an acetic acid solution, the pH value rises because the concentration of h+ ions drops as the salt concentration rises in the buffer solution.

Learn more about acetic acid, here:

https://brainly.com/question/21853303

#SPJ1

The properties of hard and soft materials refer to their physical characteristics and behaviors.

These properties are related to factors such as the arrangement of molecules, bonding strength, and response to external forces. Here, we will discuss the general properties of hard and soft materials.

Hard materials:

Rigidity: Hard materials exhibit high stiffness and resist deformation under applied forces. They tend to maintain their shape and structure.

High strength: Hard materials have strong intermolecular or intramolecular forces, allowing them to withstand high stress and pressure without breaking or deforming.

High melting and boiling points: Hard materials often have high melting and boiling points due to the strong bonds between their atoms or molecules.

Brittle: Hard materials are often brittle, meaning they have low tolerance to tensile or bending forces and are prone to fracturing or shattering instead of deforming.

Low compressibility: Hard materials have low compressibility, meaning they do not easily compress or change volume under pressure.

Soft materials:

Flexibility: Soft materials are pliable and easily deformable under applied forces. They can be bent, stretched, or compressed without breaking.

Low strength: Soft materials have weak intermolecular or intramolecular forces, making them more susceptible to deformation or damage under stress.

Low melting and boiling points: Soft materials generally have lower melting and boiling points compared to hard materials.

Ductile: Soft materials are often ductile, meaning they can be drawn into thin wires or stretched into thin sheets without fracturing.

High compressibility: Soft materials can be easily compressed or change volume under pressure due to their loosely packed molecular structures.

It's important to note that these properties are generalizations, and there can be variations within each category. Some materials may exhibit properties that fall between hard and soft, or they may have unique combinations of properties. Materials' properties play a crucial role in various applications, as they determine their suitability for specific uses such as construction, manufacturing, and design.

Know more about soft materials here:

https://brainly.in/question/9463325

#SPJ11

Answer:

A

Explanation:

To find the pH of vinegar, we can use the given formula pH= -log[H+], where [H+] is the hydronium ion concentration in the vinegar.Substituting the given value of hydronium ion concentration [H+] = 1.6 × 10^-3 M in the above formula, we get:pH = -log(1.6 × 10^-3)Using a calculator, we can evaluate the logarithm to be 2.8.Therefore, the pH of the vinegar is 2.8.Hence, the correct answer is option A) 2.8.

The correct equilibrium expression for the reaction is shown by option D

The law of mass action, from which the equilibrium expression is derived, states that, under constant temperature conditions, at equilibrium, the ratio of the product of the concentrations of the products to the product of the concentrations of the reactants is constant.

The relationship between the concentrations (or partial pressures) of reactants and products in a chemical process at equilibrium is described by an equilibrium expression.

Learn more about equilibrium expression:https://brainly.com/question/32385452

#SPJ1

The numerical value of Kc for the given reaction, with the equilibrium mixture containing 0.0450 M PCl3, 0.116 M Cl2, and 25.8 M PCl5, is approximately 4942.03.

To calculate the numerical value of Kc for the given reaction, we need to set up an expression for the equilibrium constant using the concentrations of the species involved.

The balanced equation for the reaction is:

PCl3 (g) + Cl2 (g) ⇌ PCl5 (g)

The equilibrium constant expression, Kc, is given by:

Kc = [PCI5] / ([PCl3] * [Cl2])

Given the equilibrium concentrations:

[PCl3] = 0.0450 M

[Cl2] = 0.116 M

[PCI5] = 25.8 M

Substituting these values into the equilibrium constant expression, we have:

Kc = (25.8 M) / ((0.0450 M) * (0.116 M))

Calculating Kc:

Kc = 25.8 M / (0.00522 M^2)

Kc = 4942.03

Therefore, the numerical value of Kc for the given reaction, with the equilibrium mixture containing 0.0450 M PCl3, 0.116 M Cl2, and 25.8 M PCl5, is approximately 4942.03.

For more such questions on equilibrium visit:

https://brainly.com/question/18849238

#SPJ11

There are 22.32 moles of argon in 5.00 x 10² liters of argon at STP.

According to Standard Temperature and Pressure (STP) conditions, one mole of any ideal gas occupies a volume of 22.4 liters. Using this information, we can calculate the number of moles of argon, given the volume of 5.00 x 10² liters at STP.

First, we need to determine the number of moles that would occupy a volume of 22.4 liters at STP:

1 mole of Ar = 22.4 liters of Ar

Therefore, 5.00 x 10² liters of Ar = (5.00 x 10²) / 22.4 = 22.32 moles of Ar

Therefore, there are 22.32 moles of argon in 5.00 x 10² liters of argon at STP.

For such more questions on argon

https://brainly.com/question/11471952

#SPJ11

Answer:

Commercial salt is manufactured from rock salt, as well as from seawater and other natural and artificial brines.In solution mining, water is pumped into the underground rock salt deposits to create brine that is then pumped back out to the surface. The brine is then evaporated in huge evaporating vessels to make the familiar white salt. This salt can be used in industry, by food manufacturers and, of course, at the table.

The child's height of 3 feet 5 inches is equivalent to 1.04 meters when converted using unit conversion factors.

To convert the child's height from feet and inches to meters, you would first have to convert everything to the same unit. The child is 3 feet 5 inches tall. Since one foot is equal to 12 inches, the child's height is equivalent to (3 feet x 12 inches/foot + 5 inches) = 41 inches. There are 2.54 centimeters in an inch, so the child's height in centimeters is (41 inches x 2.54 centimeters/inch) = 104.14 centimeters. There are 100 centimeters in a meter, so the child is 1.04 meters tall, when rounded to two decimal places.

https://brainly.com/question/32030244

#SPJ6

If the MDS (Minimum Data Set) is successfully implemented, several positive outcomes can be expected. The MDS is a standardized assessment tool used in healthcare settings to evaluate the physical, mental, and psychosocial well-being of patients.

Its successful implementation can lead to improved patient care, more efficient resource allocation, and enhanced data analysis.With the MDS in place, healthcare providers can gather consistent and comprehensive data about patients, enabling better understanding of their needs and tailoring of individualized care plans.

This can result in improved treatment outcomes and patient satisfaction. Additionally, the MDS facilitates effective communication and information sharing among healthcare professionals, leading to coordinated care and reduced errors.From a broader perspective, successful implementation of the MDS allows for accurate and reliable data collection, enabling robust research and evidence-based decision-making.

This can contribute to advancements in healthcare practices, policy development, and quality improvement initiatives. Ultimately, the successful implementation of the MDS can enhance patient outcomes, improve healthcare delivery, and drive positive changes in the healthcare system as a whole.

For more such questions on outcomes

https://brainly.com/question/30417322

#SPJ11

Answer:

Explanation:

HF + H2O reacts to form H3O+ (hydronium ion) and F- (fluoride ion).

Answer:

1. i think [He] 2s²

2.atomic mass number of beryllium will be the sum of 4 protons and 5 neutrons and that will be equal to 9.

Explanation: