What is the relative atomic mass for pivotium?

Answer:

Explanation:

b

For an octahedral complex, the coordination number of the central copper ion is six and it is in the +2 oxidation state.

We know that an octahedral complex is one in which there are six ligands that are attached to the central metal ion. The coordination number has to do with the number of the ligands that could be found around the central metal ion.

Copper is found in the + 2 states when it forms complexes that are octahedral in nature ad the coordination number of the central copper ion in the complex is always six.

Learn more about octahedral complex :https://brainly.com/question/11856948

#SPJ1

Since this indicator's pKa is 5, it will change color around pH 5.

To determine the approximate pH, use the cologarithm or negative logarithm of the H+ ion concentration.Similar to water, a solution with a pH of 7 is neutral. While a basic solution has a pH above 7, an acidic solution has a pH below 7.

By adding a chemical whose color depends on the pH, one of the simplest ways to figure out a solution's pH is to do so. These substances are known as acid-base indicators, or just indicators. The most popular acid-base indicator is probably litmus. if situated in comparatively.

To know more about pH visit:-

https://brainly.com/question/15289741

#SPJ4

H bonded covalently to O, N or F is required for a substance to experience hydrogen bonding among its own molecules.

It is necessary that the molecules have an atom of H attached to a highly electronegative atom such as N, O, F and also the molecule had to have a solitary pair of electrons more specifically in a small highly electronegative atom such as N, O, F.

The hydrogen bond is responsible for many of the anomalous physical and chemical properties of compound of N, O, F.

Hydrogen bonds is found within intermolecular forces, which are type of attractive forces that exist between molecules of covalent substances.

Such bonds are weaker that an ionic bond or covalent bond but stronger than Vander Waals forces.

One atom of the pair (the donor) generally a Fluorine (F), Nitrogen (N) or Oxygen (O) atom is covalently bonded to a hydrogen atom ( -FH, -NH, -OH),

whose electrons it shares unequally, its high electron affinity causes the hydrogen to take on a slight positive charge.

So, In order for a substance to experience hydrogen bonding among its own molecules, H must be covalently bound to O, N, or F.

To learn more about Hydrogen bonding, Here :

https://brainly.com/question/17626498?referrer=searchResults

#SPJ4

One of the most important use of cobalt-60 is treating cancer as it produces gamma rays.

In a teletherapy unit as a source of intense gamma radiation for the treatment of a variety of cancers an external sealed source of cobalt-60 is used. Cobalt-60 is also used as a medical tracer. A material that is introduced into the body to make possible the observation of chemical, physical or biological processes in the body is known as medical tracer.

Cobalt-60 emits two high energy gamma rays, making cobalt-60 both an internal and external hazard. Ingestion is the primary exposure pathways of concern which includes (drinking water and fish consumption), and exposure by inhalation and external exposure.

Learn more about Cobalt-60 from the link given below.

https://brainly.com/question/8181329

#SPJ4

There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Therefore, the given statement is Slightly true.

Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.

An ionic compound is a metal and nonmetal combined compound.  Ionic compound are very hard. They have high melting and boiling point because of strong ion bond.

The formula of an ionic compound starts with a metal and that of a molecular compound starts with a nonmetal. The statement is Slightly true.

Therefore, the given statement is Slightly true.

To learn more about chemical compound, here:

brainly.com/question/26487468

#SPJ1

A double replacement reaction occurs when fragments of two ionic compounds shift places to form two new compounds (also known as a double displacement, exchange, or metathesis reaction).

What is Double Displacement Reaction?

A twofold displacement reaction is one in which one reactant is partially replaced by another.

Following is a summary of double displacement reactions:

AD = CB + CD + AB

The ions in two reactant ionic compounds are switched out for the same ions in two new product compounds during a double replacement process.

A double replacement reaction occurs when two reactants switch cations or anions to form two new products.

Other names for double replacement processes include metathesis reactions and double displacement reactions.

Precipitation, gas generation, and neutralization are examples of double replacement reactions.

To learn more about double replacement reaction from the given link.

https://brainly.com/question/23918356

#SPJ4

The total number of protons in this atom is 79 because an atomic number of an element is equal to the number of protons. Here, the atomic number is 79 after adding the given electronic configuration.

What are Protons?

Every atom has a proton, a subatomic particle, in its nucleus. The particle possesses an electrical charge that is positive and opposite to the electrons.

What is Atom?

A nucleus plus one or more electrons bound to the nucleus make up an atom. The quantity of protons or electrons in an element's atom determines how different it is from other similar elements. The atomic number of an element, which serves as its primary identification, is the sum of its protons or electrons.

What is Electronic configuration?

The arrangement of electrons in atomic or molecular orbitals within an atom, molecule, or other physical structure is known as the electron configuration.

Hence, the total number of protons in this atom is 79, after adding 2 + 8 + 18 + 32 + 18 + 1.

To know more about Atom, check out:

https://brainly.com/question/6258301

#SPJ4

Answer:

The two ways in which we can increase the favorability of products without adding or removing products or reactants :

1. Increase the temperature of an endothermic reaction.

2. Decrease the temperature of an exothermic reaction.

3. Boost a reactant's concentration in an aqueous solution.

A reaction that is endothermic absorbs energy. Energy addition favors the reaction that forms the product.

A reaction that is exothermic releases energy. Removing the energy favors the reaction that forms the product.

To learn more about Endothermic and Exothermic Processes :

brainly.com/question/29555731

#SPJ4

ɪꜰ ᴛʜᴇ ᴅɪꜰꜰᴇʀᴇɴᴄᴇ ᴏꜰ ᴛʜᴇ ᴇʟᴇᴄᴛʀᴏɴᴇɢᴀᴛɪᴠɪᴛʏ ʙᴇᴛᴡᴇᴇɴ ᴛʜᴇ ᴛᴡᴏ ᴇʟᴇᴍᴇɴᴛꜱ ɪꜱ ɢʀᴇᴀᴛᴇʀ ᴛʜᴀɴ 1.7 ᴛʜᴇɴ ᴛʜᴇ ʙᴏɴᴅ ɪꜱ ɪᴏɴɪᴄ. ᴛʜᴇ ᴅɪꜰꜰᴇʀᴇɴᴄᴇ ᴡɪᴛʜ ᴀ ᴘᴏʟᴀʀ ᴄᴏᴠᴀʟᴇɴᴛ ʙᴏɴᴅ ɪꜱ 0.5 ᴛᴏ 1.7 ᴀɴᴅ ᴀ ɴᴏɴᴘᴏʟᴀʀ ᴄᴏᴠᴀʟᴇɴᴛ ʙᴏɴᴅ ɪꜱ ꜰʀᴏᴍ 0 ᴛᴏ 0.4.

■ I hope it helps uh..!!

□ mark me as brainliest ♥️

The distinguish between each pair of compounds using high- resolution mass spectrometry by the exact mass rather than nominal mass are utilizes to measure the compound.

The mass spectrometry is involves the following steps :

Mass spectrometry is the analytical method useful for the calculating the mass to charge ratio ( m / z ). the mass spectrometry is based on the newton's second law and the momentum.

Thus, the mass spectroscopy is method to measure the molecular mass of the compound and indirectly helps examine the isotopes and based on the newton's second law .

To learn more about mass spectroscopy here

https://brainly.com/question/28587595

#SPJ4

The new pressure be if pressure is kept constant, to compress nitrogen is 3 atm.

Boyle's law is significant because it explains how gases behave. It explains with certainty that the relationship between gas pressure and volume is inverse. So, when you exert pressure on gas, the volume decreases and its pressure increases.

P1V1 = P2V2

P1 and V1 are initial pressure and volume.

P2 and V2 are final pressure and volume.

P1 = 1 atm

V1 = 750 mL

P2 = ?

V2 = 500 mL

Putting values

2 * 750 mL = P2 * 500 mL

P2 = 3 atm

To know more about Boyle's law visit:

https://brainly.com/question/1437490

#SPJ4

Answer:

It would become weaker.

Explanation:

If an electron was promoted to the antibonding orbital, the bond order would become zero and the molecule would split apart.

The molar mass of  tin(II) chloride is: 84.9 g

Calculate the molar mass of  tin(II) chloride?

The number of moles n1 is thus:

n1= m1/M1 = 2.25 mol

According to the balanced reaction, the ratio by number of moles n of tin(II) chloride produced to the number of moles n1 of HF used is 1:2

As such, the number of moles of tin(II) chloride produced is :

n = 1/2 [tex]n_{1}[/tex] = 0.45 mol

The molar mass of tin(II) chloride is:

M= A[tex]_{r}[/tex](Sn)+2A[tex]_{r}[/tex](Cl) = 188.7 g/mol

The mass m produced is thus:

m = nM

= 0.45 mol × 188.7 g/mol

≈ 84.9 g

Therefore, the molar mass of  tin(II) chloride is: 84.9 g.

To know more about molar mass, check out:

https://brainly.com/question/837939

#SPJ4

2 NO2(g) ↔ 2 NO(g) O2(g) is the equation.

Which is a factor that affects the equilibrium constant?

The only thing that changes the equilibrium constant is a change in temperature. Changing the pressure can change the position of the equilibrium. According to Le Chatelier's Principle, the equilibrium position moves in such a way that it tends to undo the changes you make.

Does pressure affect equilibrium constant?

Changing the system pressure does not change the equilibrium constant. The only thing that changes the equilibrium constant is a change in temperature. Changing the pressure can change the position of the equilibrium.

Does equilibrium constant depend on pressure and volume?

Equilibrium constants are temperature dependent and independent of the actual amounts of reactants and products, the presence of catalysts, and the presence of inerts. It is also independent of the concentration, pressure and volume of extracts and products.

To know more about equilibrium , check out:

https://brainly.com/question/517289

#SPJ4

The correct option for the relationships relating to bond length is (b), i.e. the shorter the bond, the stronger the bond

As the atoms become bigger, the bonds also get stronger and longer. Larger orbitals, which assume a lower electron density and a poor percentage overlap with the hydrogen s orbital, lead to longer bonds. The H-X bonds weaken as they lengthen since this is what happens as we progress down the periodic table. Atoms that are more closely spaced from one another have a stronger link than those that are farther away. Because triple and double bonds are shorter than single bonds and enable atoms to be placed closer together, they are also much more durable. Atomic radii make up small bond lengths. Therefore, in general, the smaller the atom's radius, the stronger the link will be. This is primarily due to the electrons' proximity to the nucleus, which creates a strong bond.

To know more about bonds visit:

https://brainly.com/question/10777799

#SPJ4

The number of moles of krypton are 7.6 moles.

According to Ideal gas law,

PV = n RT

Where

P = Pressure

V = Volume

n = number of moles

R = Universal gas constant

T = Temperature

Given

P = 5.80 atm

V =  3.25 L

T = 25.5 °C

R = 8.314

Now substituting the Value in the formula

PV = n RT

So separate the n from the formula

n = PV/RT

n= 5.80 × 3.15 × 1000 / 8.314 × 298.5

n=7.59

n ≈ 7.6 moles

Therefore the moles of krypton is 7.6 moles

To look more about moles click here

brainly.com/question/26416088

#SPJ

The concentration of calcium ions in the given solution will be 22 ppm.

What is Calcium chloride?

Calcium chloride is an inorganic compound, a salt made of calcium and chlorine. It is used as a food additive, an antifreeze, and a deicer for roads and sidewalks. It is also used in water treatment to increase the water's hardness and to remove impurities.

Calcium chloride is a chemical molecule made up of two chloride ions and one calcium ion.

When calcium chloride dissociates in water, the chloride ion becomes twice the calcium ions. The calcium chloride solution has been dissociated in 500 mL of water.

The concentration of chloride ions = 44 ppm.

The concentration of calcium ions = 44 ÷ 2

                                                         = 22 ppm

The concentration of calcium ions in the solution will be 22 ppm.

To know more about Calcium chloride,

https://brainly.com/question/8812739

#SPJ4

A synthesis reaction is a chemical process in which two dissimilar atoms interact to create a new substance or molecule.

The atomic number of the alkali metal sodium is 11. The valence electron in its outermost shell is positive (+1).

With the atomic number 17, chlorine belongs to the halogen family of elements. Its octet structure can only be completed with an electron.

Because of this, their bonding process is known as electrovalent or ionic bonding.

When 2 moles of sodium (Na) and 1 mole of chlorine (Cl) are combined, the following results:

2Na(s)Sodium+Cl2(g)Chlorine→2NaCl(s)Sodium Chloride

As a result of the foregoing process, we can infer that two sodium molecules are created when two sodium (Na) atoms interact with one molecule of chlorine gas (Cl2).

To learn more about sodium chloride click on the link

https://brainly.com/question/24878544

#SPJ4

Equal masses would result in different amounts of CO, but the same quantity of CO2 would result from equal masses. Equivalent masses would exhibit high variability and be challenging to measure in a lab.

Density is a measurement that connects matter, mass, and volume. By dividing a substance's mass by its volume, density is determined. Grams are commonly used to measure mass. In terms of volume, solids are measured in cubic centimeters or cubic meters, whilst liquids are measured in liters or milliliters.

Distinct masses exist for equal quantities of two different substances. because the density of different materials varies.

To know more about volume and mass of a substance visit:-

https://brainly.com/question/13130538

#SPJ4

Eutrophication causes a decrease in the amount of oxygen available to aquatic life.

What is Eutrophication?

Eutrophication sets off an ecosystem chain reaction starting with algae and vegetation in abundance. This lowers the pH of seawater, a process known as ocean acidification.

Eutrophication occurs when nutrients are abundant, and visible algal blooms grow densely. Eventually, these algae die and decompose, absorbing oxygen and reducing oxygen levels in the water. Eutrophication can also lead to a shift in species composition towards faster-growing algal species and from long-lived macroalgae to more wild species.

Thus, Eutrophication causes a decrease in the amount of oxygen available to aquatic life.

To know more about Eutrophication, check out:

https://brainly.com/question/8499582

#SPJ4

1 atm (275 mL) equals 3.10 atm V2, where V2 is equal to 275 mL divided by 3.10, and P1V1 equals P2V2. The calculation is 1(275) = 3.1 (88.71) = 275.

The ideal gas equation can be changed to demonstrate that the pressure of a sample of gas is directly proportional to the amount of gas present, volume, and temperature is held constant: P=n(RTV)=n×const

Volume and temperature are related as follows: V1 / T1 = V2 / T2, where V1 and T1 represent the beginning volume and absolute temperature, and V2 and T2 represent the final volume and absolute temperature (the Kelvin temperature, not the Celsius temperature).

to more about temperature here:

brainly.com/question/11500464

#SPJ4

The characteristic reaction of carboxylic acid derivatives  is nucleophilic acyl substitution.

the carboxylic acid contains c=o bonds and at the starting there is a nucleophilic attack on a electrophilic carbonyl atom which forms a tetrahedral alkoxide intermediate.

now, the alkoxide negative charge give stability by transferring the y leaving group which allows the c=o bond to reform and which make a new acyl compound.

[tex]R-CO-Y+:Nu^{-} \rightarrow R-C-(O)(Y)(Nu)[/tex]

now, the above reaction is considered substitution because y group of the carboxylic acid derivative get exchanged with nucleophile.

Learn more about carboxylic acid derivatives.

brainly.com/question/28167857

#SPJ4

The report targeted to managers is condensed into an executive summary, also known as that of the epitome, Executive Summary, management summary, or management overview.

The fundamental line of reasoning for most recommendation reports would include a description of the problem, the solution, the advantages of the solution, and any particular recommendations (if not already made clear in the solution section).List of contents.

A transmittal letter, a title page, a summary of some kind, a table of contents, and listings of figures and/or tables are examples of common front matter elements.

To know more about brief condensation visit:

https://brainly.com/question/1578753

#SPJ4

The compound that is the hemiacetal that forms when ethanol reacts with propanal is attached.

A hemiacetal is a combination of an alcohol and an ether attached to the same carbon. Hydrogen holds the fourth bonding position. An aldehyde is the starting point for a hemiacetal. Hemiacetals are formed from aldehydes and are named after the Greek word "hemi," which means "half."

Ethanol is a flammable, colorless chemical compound that is one of the most commonly found alcohols in alcoholic beverages. It is also known as "ethyl alcohol" or "grade alcohol."

Propionaldehyde, also known as propanal, is an organic compound. It's a three-carbon aldehyde. It has a slightly fruity odor and is colorless and flammable. It is mass-produced on an industrial scale.

In this case, the compound illustrate the reaction.

Learn more about hemiacetal on:

https://brainly.com/question/2983055

#SPJ1

Electronegativity for boron is 2.0, and electronegativity for fluorine is 4.0. which type of bond forms between boron (B) and fluorine (F) in BF₃ is non polar covalent bond.

The  BF₃ is the covalent molecule. the electronegativity for boron is 2.0 and the electronegativity for the fluorine is 4.0 . the boron has 3 valence electrons and need 5 more to complete the octet and fluorine has 7 valence electrons . thus boron form three covalent bond with the atom of fluorine and try to complete the octet.

The  BF₃ is a triangular planar molecule. the dipole moment in the  BF₃ molecule is zero therefore  BF₃, boron trifluoride is a non polar covalent molecule.

To learn more about electronegativity here

https://brainly.com/question/19374222

#SPJ4

An electric field is produced when high voltage is applied to capacitor plates, deflecting cathode rays. The negatively charged electrons are directed away from the negatively charged plate and toward the positively charged plate when a cathode ray is transmitted through this electric field.

Electricity is the set of physical phenomena associated with the presence and motion of matter that has a property of electric charge. Electricity is related to magnetism, both being part of the phenomenon of electromagnetism, as described by Maxwell's equations

Voltage, current, and resistance are the three most fundamental elements of electricity. Voltage is comparable to the force that forces water through a hose. It is expressed as volts (V). CURRENT is comparable to the hose's diameter.

To know more about Electricity please click here ; https://brainly.com/question/776932

#SPJ1

S is more metallic than Cl and Al is more metallic than indium and As is more metallic than Br.

In a period when we move across, from left to right then there will be an increase in electronegativity and also there will be an increase in non-metallic character of the elements.

As sulfur (S) belongs to group 16 element and chlorine (Cl) belongs to group 17 element. Thus, sulfur (S) is more metallic in nature than chlorine.

Therefore, chlorine (S) is less metallic than chlorine (Cl).

Both indium (I) and aluminium (Al) belongs to group 13 elements. And, when we move down in the group then there will be an increase in non-metallic character of the elements. As indium belongs to group 13 and period 5 wherein aluminium belongs to group 13 and period 3.

Thus, aluminium (Al) is more metallic than indium (In).

Arsenic (Ar) belongs to 15 element and bromine (Br) belongs to group 17 element. Thus, arsenic is more metallic than bromine.

Learn more about metallic character from the link given below.

https://brainly.com/question/14657176

#SPJ4

Answer:

magnesium because it gives its electrons to copper

copper gains from mg

copper is reduced and magnesium is oxidised