What is the specific heat of a substance if a mass of 10.0 kg increases in temperature from 10.0°c to 70.0°c when 2,520 j of heat is applied? use q equals m c subscript p delta t.. 0.00420 j/(gi°c) 0.00661 j/(gi°c) 238 j/(gi°c) 252 j/(gi°c)

Answer:

it’s 10ml

Explanation:

200/2 = 10

The answer is 0.46 ml of the original H₂S0₄ and dilute to a final volume of 100 ml.

Normality is a measure of concentration equal to the gram equivalent weight per liter of solution.

Normality = Number of gram equivalents × [volume of solution in litres]⁻¹

Preparing 100. ml of 0.1 N H₂S0₄

Eq. wt. of H₂S0₄ = 98/2=49

density of H₂S0₄= 1.08

Purity =98%

1 N H₂S0₄ = 49 gH₂S0₄ / liter

1  gm equiv wt /L x 1 gm equiv. wt / 2 = 98 / 2 = 49 g)

0.1 N H2SO4 = 4.9 g / L

To make 100 ml (0.100 L) we would need 4.9 [tex]\rm \frac{g}{L}[/tex] x 0.1 L

= 0.49 g H₂S0₄/100ml

Original density = 1.08 g / ml

with a purity of 98%,

this converts to 1.08 g x 0.98 = 1.058 g /ml

0.49 g H₂S0₄ x 1 ml / 1.058 g = 0.46 ml of original H₂S0₄needed

Therefore to make the desired solution

Take 0.46 ml of the original H₂S0₄ and dilute to a final volume of 100 ml.

To know more about Normality

https://brainly.com/question/9754178

#SPJ1

Answer:

it is a weak acid

acid

Explanation:

formaldehyde is a weak acid (pK greater than 13),

Answer:

Air resistance opposes the gravity in a falling object hence the object loses speed once it reaches terminal velocity.

According to the experim

Answer: See attached image

Explanation:

The value of density in the required units is [tex]\rm \rho = 2.4\times 10^{-5} lb/in^{3}[/tex]

Density, mass of a unit volume of a material substance. The formula for density is

d = M/V

where d is density, M is mass, and V is volume.

Density is commonly expressed in units of grams per cubic centimetre.

In the given question

Density given is 0.668 g/L

1 lb = 454grams.

1L = 1000 cm³

1 inch = 2.54 cm

Density in pounds per cubic inch =

[tex]\rm \rho = 0.668 \times \dfrac{(1 \;lb)(1 grams)}{454\; grams}\times \dfrac{(1 L)(2.54)^{3}(1 cm^{3})}{1000cm^{3}(1\;L)(1 in^{3})}[/tex]

[tex]\rm \rho = 2.4\times 10^{-5} lb/in^{3}[/tex]

Therefore the value of density in the required units is [tex]\rm \rho = 2.4\times 10^{-5} lb/in^{3}[/tex].

To know more about density

https://brainly.com/question/15164682

#SPJ1

The mass of copper that will be produced from copper oxide is determined as 3.19 g.

The mass of copper that will be produced from copper oxide is calculated as follows;

2Cu + O₂  -----> 2CuO

2          1             2

2(63.5) ------------ 2(79.5)

x ---------------------- 4 g

x = (4 x 2 x 63.5)/(2 x 79.5)

x = 3.19 g

Thus, the mass of copper that will be produced from copper oxide is determined as 3.19 g.

Learn more about copper here: https://brainly.com/question/24856041

#SPJ1

Explanation:

MgCl2(aq) + NaOH(aq) = Mg(OH)2(s) + NaCl. Both magnesium nitrate and sodium hydroxide solutions are colourless solutions. When they react with each other, a white precipitate (Mg(OH)2) and a colourless solution is given. Sodium chloride exists in the colourless aqueous solution.

The amount, in grams, of HCl that are in 25.0 grams of concentrated hydrochloric acid will be 9.5 grams

Every concentrated HCl contains 38% HCl by mass. This means that 38 grams of HCl would be in every 100 grams of concentrated HCl.

There, for 25.0 grams concentrated HCl, the amount of HCl can be calculated as:

         38/100 x 25.0 = 9.5 grams

More on percentage constituents can be found here: https://brainly.com/question/26100988

#SPJ1

Answer:

The nuclear composition of uranium-235 is 92 protons and 143 neutrons.

Answer:

an organic compound made by replacing the hydrogen of an acid by an alkyl or other organic group. Many naturally occurring fats and essential oils are esters of fatty acids

Explanation:

ester, any of a class of organic compounds that react with water to produce alcohols and organic or inorganic acids. Esters derived from carboxylic acids are the most common. The term ester was introduced in the first half of the 19th century by German chemist Leopold Gmelin

The weight of an object is defined as the force of gravity on the object and may be calculated as the mass times the acceleration of gravity, w = mg. Since the weight is a force, its SI unit is the newton.

W = mg

Weight of object = mass of object × acceleration of gravity

Answer:  100 milligrams per dose

10 mg per kg. The drug of ten kilos so you do

10 mg * 10 kg = 100 mg per dose

Explanation:

The students can determine which of the solutions contains salt through the conductive tester.

It is a solution containing ions are atoms that have gained or lost electrons to acquire a positive (lost electron) or negative (gained electron) charge.

An ionic solution would be able to conduct electricity whereas the covalent would not so if you have a conductivity tester which is available in most labs.

The students can distinguish between the 2 solutions through the conductive tester.

Learn more about the ionic solution here:

https://brainly.com/question/14275722

#SPJ1

The required formula of hydrate is MgSO₃.6H₂O.

The number of moles of water per mole of anhydrous solid (x) will be computed by dividing the number of moles of water by the number of moles of anhydrous solid (x) to find the hydrate's formula.

Moles will be calculated as:
n = W/M, where

Moles of MgSO₃ = 0.737g / 104.3g/mol = 0.007mol

Moles of H₂O = 0.763g / 18g/mol = 0.04 mol

Number of H₂O molecule = 0.04/0.007 = 5.7 = 6

So formula of hydrate is MgSO₃.6H₂O.

Hence required formula of hydrate compound is MgSO₃.6H₂O.

To know more about hydrate compound, visit the below link:

https://brainly.com/question/22411417

#SPJ1

Answer:

Increase of pressure increases the coordination number during crystallization e.g. by applying pressure the NaCl type crystal structure having 6:6 coordination number changes to CsCl type crystal having coordination number 8:8.

welc!! you Σ=)

Answer:

rsghkm vumm

Explanation:

el correo de confirmación con la que se ha enviado desde correo ok recibido gracias saludos María del Ca

The percent composition of Cesium and Fluorine in CsF are 87.493 % and 12.507 % respectively.

Percent composition is very simple. Percent composition tells you by mass what percent of each element is present in a compound.

Molecular mass of Cs = 132.9054519

Molecular mass of F = 18.9984032

Molecular mass of CsF = 132.9054519 + 18.9984032 = 151.9038551

CsF: Percent composition by element:

Cesium (Cs) =  [tex]\frac{32.9054519 X 100}{151.9038551}[/tex] = 87.493 %

Fluorine (F) =  [tex]\frac{18.9984032 X 100 }{151.9038551}[/tex]= 12.507 %

Hence, the percent composition of Cesium and Fluorine in CsF are 87.493 % and 12.507 % respectively.

Learn more about the percentage composition here:

https://brainly.com/question/20614202

SPJ1

Because:

Their roots are no longer in the soil. Thus, can't absorb water and mineral ions needed for plant growth via photosynthesis.

Hope this helps!

Answer:

Yes

Explanation:

Well this is because when a plant is planted water goes from the soil, into the roots then finally distributed to other parts of the plant.

So when plants have been plucked or uprooted water no longer has access to the plant which may result to the plant being dried up and will possibly die

Answer:

280gr of salt

Explanation:

4.80 x ( 22.99 + 35.45) = 280gr

Simple as that

           

For first order plot of ln( [tex]P_{SO_{2}Cl_{2}}[/tex]) vs time will be a straight line, which shows first order reaction

A first-order reaction can be defined as a chemical reaction in which the reaction rate is linearly dependent on the concentration of only one reactant. In other words, a first-order reaction is a chemical reaction in which the rate varies based on the changes in the concentration of only one of the reactants

Every mole of SO₂Cl₂ that dissociates results in a mole of SO₂ &Cl₂

[tex]\rm P_{total}= P_{Cl_{2}\\}+ P_{SO_{2}Cl_{2}}+ P_{SO_{2}}\\\\ P_{total} = P_{o}- \beta +\beta + \beta\\\\ P_{total} = P_{o}+\beta[/tex]

For first order plot of ln( [tex]P_{SO_{2}Cl_{2}}[/tex]) vs time will be a straight line.

t(hr)           [tex]P_{SO_{2}Cl_{2}}[/tex]                            ln([tex]P_{SO_{2}Cl_{2}}[/tex] )

0                11.07                                  2.404

3                 7.35                                 1.995

6                4.88                                 1.585

9                3.24                                 1.176

12                2.15                                 0.765

15                1.43                                 0.358

β = P(total) - P(initial)

[tex]\rm P_{SO_{2}Cl_{2}}[/tex] = P₀ - β

for t= 3

β =3.72

and

[tex]\rm P_{SO_{2}Cl_{2}}[/tex] = 7.35

For first order plot of ln( [tex]P_{SO_{2}Cl_{2}}[/tex]) vs time will be a straight line, which shows first order reaction.

To know more about First order Reaction

https://brainly.com/question/2284525

#SPJ1

The following compounds create solutions that are listed below

A solution is a homogeneous mixture of one or more solutes dissolved in a solvent.

solvent: the substance in which a solute dissolves to produce a homogeneous mixture

solute: the substance that dissolves in a solvent to produce a homogeneous mixture

1. Nal and H₂O

It will form an ionic solution .

2. KBr and CH4

It will not form a solution

3. CO₂ and CF₄

It will not form a solution

4. LiCI and CCl₄

It will not form a solution

5. NH₃ and H₂O

It will also form a solution and liberate ions of ammonium

6.CO₂ and H₂O

It will form a solution named as carbonic acid

To know more about Solution

https://brainly.com/question/1616939

#SPJ1

Answer:

Liquid–liquid extraction

Explanation:

Answer:

Laser light is made of one specific color

Explanation:

Regular light is a mixture of electromagnetic waves of different wavelengths

Laser light is monochrome (one colour).

common laser colors are

red , green and violet

https://brainly.com/question/18338338

biglasers.com

Answer: C

Explanation: got it right on edge 2023

An ecosystem is simply a collection of communities of plants, animals, and microbes interacting together and with their physical environments.

Energy enters the ecosystem through a group of living organisms known as the producers. the producers are mainly the green plants that are capable of photosynthesizing.

Photosynthesis converts solar radiation from the sun to chemical energy in green plants. Another group of organisms in the ecosystem, the primary consumers, feed directly on the producers and as such, are able to gain some energy from them.

The secondary consumers obtain their own energy by feeding on primary consumers. Tertiary consumers feed on the secondary consumers for their own energy and the food chain goes on and on.

Only about 10% of the available energy in one trophic level goes to the next trophic level. The rest of the energy is lost as heat to the surroundings. Thus, the producers have the highest energy in the ecosystem while organisms at the top of the food chain have the lowest energy.

More on energy flow in the ecosystem can be found here: https://brainly.com/question/7582129

#SPJ1

Answer:

0.0734 grams LiOH

Explanation:

The molarity formula looks like this:

Molarity (M) = moles / volume (L)

You are given the molarity and volume (in mL). Therefore, you can plug these values into the equation and solve for moles (after you convert from mL to L).

25 mL / 1,000 = 0.025 L

0.125 M = moles / 0.025 L

(0.125 M) x (0.025 L) = moles

0.003125 = moles

After using the molarity formula, we know that 0.003125 moles LiOH are needed to satisfy these conditions. Now, we can convert this to grams using the molar mass of LiOH. This can be determined using the values from the periodic table. Remember to write your conversion in a way that allows for the units to cancel out.

Molar Mass (LiOH) = 6.941 g/mol + 16.00 g/mol + 1.008 g/mol

Molar Mass (LiOH) = 23.499 g/mol

0.003125 moles           23.499 g
------------------------   x   -------------------  =  0.0734 grams LiOH
                                        1 mole

0.074 grams of lithium hydroxide are needed to make 25 ml of 0.125 M solution, according to the concept of molar concentration.

Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.

The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.

In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.

Here , in the problem mass is to be determined, hence the formula used is the first one mentioned.

Substituting values in the formula,mass=molar concentration×molar mass×volume in liters

∴0.125×23.95×0.025=0.074 g.

Hence, 0.074 g of lithium hydroxide are required to prepare 25 ml of 0.125 M solution.

Learn more about molar concentration,here:

https://brainly.com/question/21841645

#SPJ2

The volume that sulfur dioxide will occupy with a volume of 652 mL at 40.0°C and 0.75 atm is 0.019moles. Details about volume can be found below.

The volume of a gas can be calculated using the following formula:

PV = nRT

0.75 × 0.652 = n × 0.0821 × 313

0.489 = 25.69n

n = 0.489/25.69

n = 0.019moles

Therefore, the volume that sulfur dioxide will occupy with a volume of 652 mL at 40.0°C and 0.75 atm is 0.019moles.

Learn more about volume at: https://brainly.com/question/1578538

#SPJ1

Grams are the unit of measurement of the mass or the weight of the substance. There are 1.17 gms of chlorine atoms in the sample.

The mass of the substance is the multiplication of the moles and the molar mass.

Barium chloride dissociates as:

BaCl₂ ⇄  Ba²⁺ + 2 Cl⁻

From the reaction, it can be said that 1 mole of barium chloride dissociates into 1-mole barium ion and 2 moles of chloride ions.

Moles of barium chloride are calculated as:

Moles = mass ÷ molar mass

= 3.45 gm ÷ 208.23 g/mol

= 0.016 moles

If 1 mole of Barium chloride has 2 moles then 0.016 moles of the sample will have, 0.0331 moles of chloride ions.

The mass of chlorine atoms is calculated as:

Mass = moles × molar mass

= 0.0331 × 35.45

= 1.17 gms

Therefore, 1.17 gms of chlorine atoms are present in barium chloride.

Learn more about mass here:

https://brainly.com/question/9406646

#SPJ1