2. Which of the following contributions did Louie De Broglie do for electronic structure of matter? A. determined the speed of electron of hydrogen atom B. proposed a theory that electrons showed characteristics similar to light C. provided mathematical operation for the characteristics of light D. recorded the movement of proton in the nucleus of an atom
❤️
Answer:
In 1924 Louis de Broglie introduced the idea that particles, such as electrons, could be described not only as particles but also as waves. This was substantiated by the way streams of electrons were reflected against crystals and spread through thin metal foils.
Explanation:
I know I probably didn't answer your question, I just used all of my knowledge that I learned about Louie De Broglie. Hope it helps!
please help me with these four i dont rlly get the question itself tbh. 20 points
Explanation:
These prefixes are very commonly used in naming chemical compounds.
Di- means two.
For example, carbon dioxide's formula is be written as [tex]\text{CO}_2,[/tex] and it has 2 oxygen atoms, hence "di-oxide."
Tetra - means four.
For example, carbon tetrachloride's chemical formula is written as [tex]\text{CCl}_4[/tex], and there are four chlorine atoms
Deca- means ten
For example, lanthanum decahydride's chemical formula is written as [tex]\text{LaH}_{10}.[/tex] In this case there are 10 hydrogen atoms for every lanthanum atom.
Hepta - means seven
For example, iodine heptafluoride is written as [tex]\text{IF}_7[/tex]. Note the seven fluorine atoms attached to the iodine atom, hence the name "hepta-fluoride."
All circuits include
a battery, wires, and a switch.
an energy source, a resistor, and a battery.
a battery, a light bulb, and a switch.
an energy source, a load, and wires.
Answer:
a battery, wires, and a switch.
Explanation:
All circuits include?
a Answer the following questions 1. On a cold wintery day, you burn firewood to keep yourself warm. The firewood undergoes a change in state. a. Name the change in state of matter that you see
Answer:
heating prosedure takes place the opposite of condensation
A mass vibrates back and forth from the free end of an ideal spring of spring constant 20 N/m with an amplitude of 0.30 m. What is the kinetic energy of this vibrating mass when it is 0.30 m from its equilibrium position?
Hi there!
We can begin by using the work-energy theorem in regards to an oscillating spring system.
Total Mechanical Energy = Kinetic Energy + Potential Energy
For a spring:
[tex]\text{Total ME} = \frac{1}{2}kA^2\\\\\text{KE} = \frac{1}{2}mv^2\\\\PE = \frac{1}{2}kx^2[/tex]
A = amplitude (m)
k = Spring constant (N/m)
x = displacement from equilibrium (m)
m = mass (kg)
We aren't given the mass, so we can solve for kinetic energy by rearranging the equation:
ME = KE + PE
ME - PE = KE
Thus:
[tex]KE = \frac{1}{2}kA^2 - \frac{1}{2}kx^2\\\\[/tex]
Plug in the given values:
[tex]KE = \frac{1}{2}(20)(0.3^2) - \frac{1}{2}(20)(0.3^2) = \boxed{0 \text{ J}}[/tex]
We can also justify this because when the mass is at the amplitude, the acceleration is at its maximum, but its instantaneous velocity is 0 m/s.
Thus, the object would have no kinetic energy since KE = 1/2mv².
1. Explain who is doing more work and why: a bricklayer carrying bricks and placing them on the wallof a building being
constructed, or a project supervisor observing and recording the progress of the
workers from an observation booth.
Why do you suppose Km values are so frequently standardized and published, drawing attention to the value of Vmax/2, rather than Vmax itself
Km values are standardized because half the Vmax (Vmax/2) is more informative than Vmax. This value (Km) can be used to calculate the affinity of the enzyme by a given substrate.
The Km (Michaelis constant) of the enzyme refers to the value in which the concentration of substrate is equal to half of its maximum velocity (Vmax/2).
This value (Km) is inversely proportional to the affinity of an enzyme by a given substrate.
An enzyme showing a high Km also exhibits a low affinity for its specific substrate, and thereby this enzyme requires a high concentration of the substrate to reach its maximum velocity (Vmax).
In consequence, the Km value is a more informative value than the maximum velocity (Vmax), which only indicates the concentration of an enzyme catalyzing a reaction under ideal conditions.
Learn more in:
https://brainly.com/question/5182881
what is the meaning of word thermodynamics
Answer:
physics that deals with the mechanical action or relations of heat.
After an unfortunate accident occurred at a local warehouse, you were contracted to determine the cause. A jib crane collapsed and injured a worker. An image of this type of crane is shown in the figure.The horizontal steel beam had a mass of 88.50 kg
per meter of length, and the tension in the cable was =11650 N
. The crane was rated for a maximum load of 500 kg
. If =5.580 m
, =0.522 m
, =1.350 m
, and ℎ=2.070 m
, what was the magnitude of L
(the load on the crane) before the collapse? The acceleration due to gravity is =9.810 m/s2
The magnitude of the load L on the crane before the collapse is 3211.81 N
To determine the magnitude of the load on the crane (L), we will need to make use of the equilibrium conditions of the torque.
It is always an ideal process to list out all the parameters given as this will let you understand how you can determine the answer to the question from the given parameters.
From the given information;
The tension in the cable = 11650 NThe length (d) = 5.580 mThe mass of the horizontal steel beam (M) = 88.50 kg/m (d)= 88.50 kg/m × 5.580 m= 493.83 kgDistance (s) = 0.522 mx = 1.350 m and h = 2.070 mAcceleration due to gravity = 9.81 m/s²From the question;
the angle at which the crane is positioned can be determined by taking the tangent of the angle θ. i.e.
[tex]\mathbf{tan \ \theta = \dfrac{h}{d-s}}[/tex]
[tex]\mathbf{\theta = tan^{-1} \Big ( \dfrac{h}{d-s} \Big )}[/tex]
[tex]\mathbf{\theta = tan^{-1} \Big ( \dfrac{2.070 }{5.580 - 0.522} \Big )}[/tex]
[tex]\mathbf{\theta =22.26^0}[/tex]
Consider the equilibrium conditions of the torques with respect to the magnitude of the load at point P.
∴
[tex]\mathbf{Tsin \theta (d-s) - W_L (d-x) -(Mg) (\dfrac{d}{2}) = 0}[/tex]
By making the magnitude of the load [tex]\mathbf{W_L}[/tex] the subject of the formula, we have:
[tex]\mathbf{W_L = \dfrac{Tsin \theta (d-x) -(Mg) (\dfrac{d}{2})}{ (d-s) } }[/tex]
[tex]\mathbf{W_L = \dfrac{(11650 )sin (22.26) (5.580-1.350) -(88.50\times 9.81) (\dfrac{5.580}{2})}{ (5.580-0.522) } }[/tex]
[tex]\mathbf{W_L = 3211.81 \ N }[/tex]
Therefore, we can conclude that the magnitude of the load is 3211.81 N
Learn more about the magnitude of an object here:
https://brainly.com/question/24623437?referrer=searchResults
What are the 7 different states of matter in Chemistry?How many states of matter are there?
Answer:
The 7 states of matter are solid, loquid, gas, fermionoc condensate, quark gluton plasm, bose einetein condensate amd ionised plasm but its usually only 3 they teach you
Answer:
7
Explanation:
solid, liquid,gas,fermionoc condensate,quark glutton plasm,bose einetein condensate amd ionised plasm.
What is most likely the amount of energy available at a trophic level of primary consumers if the amount of energy available to secondary consumers in that food web is 200 kilocalories?
0 kilocalories
20 kilocalories
200 kilocalories
2,000 kilocalories
Answer:
200 kilocalories
Explanation:
a coconut falls from the top of a tree and takes 3.5 seconds to reach the ground. How tall is the tree?
Hello!
To solve, we can begin by using the kinematic equation:
[tex]d = v_it + \frac{1}{2}at^2[/tex]
Where:
vi = initial velocity (m/s)
t = time (s)
a = acceleration (in this case, due to gravity. g = 9.8 m/s²)
Since the object falls from rest, the initial velocity is 0 m/s.
[tex]d = \frac{1}{2}at^2[/tex]
Plug in the given values:
[tex]d = \frac{1}{2}(9.8)(3.5^2) = \boxed{60.025 m}[/tex]
Velocity and Acceleration Quick Check
C
D
E
During which of the labeled time segments is the object moving forward but slowing down?
(1 point)
Ο Α
0 С
OD
ОВ
Answer:
Explanation:
1 Object C has an acceleration that is greater than the acceleration for D.
2 B
3 17M
4 The velocity is zero.
5 a straight line with negative slope
just took it
A domestic water heater holds 189 L of water at 608C, 1 atm. Determine the exergy of the hot water, in kJ. To what elevation, in m, would a 1000-kg mass have to be raised from zero elevation relative to the reference environment for its exergy to equal that of the hot water
A.
The energy of the hot water is 482630400 J
Using Q = mcΔT where Q = energy of hot water, m = mass of water = ρV where ρ = density of water = 1000 kg/m³ and V = volume of water = 189 L = 0.189 m³,
c = specific heat capacity of water = 4200 J/kg-°C and ΔT = temperature change of water = T₂ - T₁ where T₂ = final temperature of water = 608 °C. If we assume the water was initially at 0°C, T₁ = 0 °C. So, the temperature change ΔT = 608 °C - 0 °C = 608 °C
Substituting the values of the variables into the equation, we have
Q = mcΔT
Q = ρVcΔT
Q = 1000 kg/m³ × 0.189 m³ × 4200 J/kg-°C × 608 °C
Q = 482630400 J
So, the energy of the hot water is 482630400 J
B.
The elevation the mass would have to be raised from zero elevation relative to the reference environment for its exergy to equal that of the hot water is 49248 m.
Using the equation for gravitational potential energy ΔU = mgΔh where m = mass of object = 1000 kg, g = acceleration due to gravity = 9.8 m/s² and Δh = h - h' where h = required elevation and h' = zero level elevation = 0 m
Since the energy of the mass equal the energy of the hot water, ΔU = 482630400 J
So, ΔU = mgΔh
ΔU = mg(h - h')
making h subject of the formula, we have
h = h' + ΔU/mg
Substituting the values of the variables into the equation, we have
h = h' + ΔU/mg
h = 0 m + 482630400 J/(1000 kg × 9.8 m/s²)
h = 0 m + 482630400 J/(9800 kgm/s²)
h = 0 m + 49248 m
h = 49248 m
So, the elevation the mass would have to be raised from zero elevation relative to the reference environment for its exergy to equal that of the hot water is 49248 m.
Learn more about heat energy here:
https://brainly.com/question/11961649
How long will it take a car, starting from rest, accelerating at 2 meters per second square to travel the same distance that another car traveling at a constant rate of 20m/s will travel?
20 seconds
Explanation:
Let [tex]x_a[/tex] be the distance traveled by the accelerating car and [tex]x_c[/tex] be the distance traveled by the car moving with a constant velocity. When they cover the same distance, we can write
[tex]x_a = x_c \Rightarrow v_{0a}t + \frac{1}{2}at^2 = v_ct[/tex]
where [tex]v_c[/tex] is the velocity of car moving at a constant rate and a is the acceleration of the accelerating car. Since the accelerating car started from rest, then [tex]v_{0a}[/tex] is zero so our equation above simplifies to
[tex]\frac{1}{2}at^2 = v_ct[/tex]
Note that the variable t cancels out so solving for t, we get
[tex]\frac{1}{2}at = v_c \Rightarrow t = \dfrac{2v_c}{a}[/tex]
Plugging in the given values,
[tex]t = \dfrac{2(20\:\text{m/s})}{2\:\text{m/s}^2} = 20\:\text{s}[/tex]
difference between speed and velocity
Answer:
Speed is the time rate at which an object is moving along a path, while velocity is the rate and direction of an object's movement.
Explanation:
Objects 1 and 2 attract each other with a gravitational force of 16 units. If the mass of object 1 is one-third the original value AND the mass of object 2 is doubled AND the distance separating objects 1 and 2 is doubled, then the new gravitational force will be _____ units.
Explanation:
Fgravity = G*(mass1*mass2)/D²
G is the gravitational constant, which has the same value throughout our universe.
D is the distance between both objects.
so, now some numbers change
Fgravitynew = G*((1/3)*mass1*2*mass2)/(2D)² =
= G*((2/3)*mass1*mass2)/(4D²) =
= (2/3)* (G*(mass1*mass2)/D²) / 4 =
= ((2/3)/4) * G*(mass1*mass2)/D² =
= (2/12) * Fgravity = Fgravity/6
the new gravitational force will be 16/6 = 8/3 units.
calculate the mass of a block of ice having volume 5m³. (density of ice≈920 kg/m³)
Answer:
4600 Kg/m³
Explanation:
Volume of block=5m³
Mass of block= 920 kg/m³
Density=mass × volume
=920 × 5³
=4600 /m³
The density of ice is 4600 Kg/m³
___________________________________
(Hope this helps can I pls have brainlist (crown)☺️)
Explanation:
Solution:
Here
volume=5
Density=920
Density =Mass/Volume
or,Mass=Density*Volume
or,M=920*5
so,M=4600kg
A metal wire of length 1.2 m and cross-sectional area 2.0 x 10 raised to power-7 m 2 is stretched by a force of 50 N. assuming the force constant of the metal is 6000 Nm-1. Calculate the tensile stress
L=1m
=2mm²=(2/1000²)=2(10^-6)m
y=4x10¹¹N/m²
∆l=2mm=2/10.00=0.002m
=(4x10¹¹x2x10^-6x2x10^-3)÷1m
=16x10¹¹-⁶-³
=16x10¹¹-⁹
=16x10²
=1600N
where a=cross sectional area=2x10^-6m
C=2mm= 2x10^-3m
L=1m
hope it helps
Anita Knapp needs to get hay to cows in a frozen field using an airplane flying
80.0 m/s, at a height of 300,m. If at the last minute, how far from the cow would
she have to release the hay in order to hit the cow?*
756 m
626m
700m
575 m
Other:
Answer:
626m
Explanation:
A 6.5 N ball is thrown with an initial velocity of 20 m/s at a 35° angle from a height of 1.5 m, what is the velocity if it is caught at 1.5 m?
Answer:
20 m/s at -35°
Explanation:
Ignoring air resistance, the initial vertical velocity will be reversed and the initial horizontal velocity will remain constant.
A car with an initial position of 10.0 m
and an initial velocity of 16.0 m/s accelerates at an average rate of 0.50 m/s2 for 4.0 s. What is the car’s position after 4.0 s?
Answer:
78
Explanation:
x=xi+vi(t)+1/2a(t)^2
x=10+16(4)+1/2(0.50)(4)^2
x=74+4
x=78 m
what is photosynthesis
: [tex] \implies[/tex] The Photosynthesis is the process of capturing light energy and transforming it into chemical energy. Green plants and several other organisms use light energy and convert carbon dioxide and water into glucose. In this process, oxygen is produced as a by-product
→ We also who how it's process occur
In plants and blue-green algae, the photosynthesis process takes place in chloroplasts. The chloroplast is present in all green parts of a plant – the leaves, green stems, sepals, and even in the flowers, in the form of green colour plastids. The chloroplast is found only in plant cells and is essential for photosynthesis reaction.Photosynthesis Equation
Carbon dioxide and water are the two major factors involved in the photosynthesis reaction. It’s an endothermic reaction, and the products resulting from it are oxygen and glucose. The formula is:6CO2 + 6H2O = C6H12O6 + 6O2
However, some bacteria don’t produce oxygen as a by-product of photosynthesis. They are called anoxygenic photosynthetic bacteria, and those who do it are called oxygenic photosynthetic bacteria.Importance of Photosynthesis
The photosynthesis process is very important for the survival of living beings, and to continue the food chain. It also produces oxygen, which is required for breathing.Photosynthetic Pigments
Four types of photosynthetic pigments are present in the leaves of the plants. They are: Chlorophyll a chlorophyll b xanthophylls CarotenoidsThe Factors Affecting Photosynthesis
Various factors influence/affect the photosynthesis process. These are:
Light Intensity: More the light, the more will be the rate of photosynthesis. Similarly, low light will lead to a low rate of photosynthesis.The Concentration of CO2: A higher CO2 concentration rate in a plant also accelerates the photosynthesis process. The required amount of CO2 is 300-400 PPM.Temperature: If the temperature is between the range of 25 to 35 degrees Celsius, the photosynthesis takes place effectively.Water: An essential amount of water is required for stomatal opening, and it’s a key factor in the process of photosynthesis.Pollution: The increasing rate of polluting particles in the atmosphere block the pores of somatic cells, and the intake of carbon dioxide becomes difficult.▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Hope it's helps !!
a. How fast should a boy of 40kg mass run so that the kinetic energy becomes 800J?
Answer:
[tex]k.e. = \frac{1}{2}mv {}^{2} \\ 800= \frac{1}{2} \times 40 \times v {}^{2} \\ 800 = 20v {}^{2} \\ v {}^{2} = 400 \\ v {}^{2} = 20ms {}^{ - 1} [/tex]
k.e. = kinetic energy
hope helpful <3
A student stomps sternly on a super-sized stomp rocket. They notice that the rocket lands 54
m away in a time of 5.5 s. Find the magnitude of the total initial velocity of the rocket.
The magnitude of the total initial velocity of the rocket is determined as 9.82 m/s.
What is the total initial velocity of the rocket?
The magnitude of the total initial velocity of the rocket is calculated as follows;
V = D/T
where;
D is the distanceT is time of motionV = (54)/(5.5)
V = 9.82 m/s
Thus, the magnitude of the total initial velocity of the rocket is determined as 9.82 m/s.
Learn more about velocity here: https://brainly.com/question/4931057
#SPJ2
Which statement best describes how light behaves with liquids, gases, and solids?
A. Light is unable to travel through liquids but travels easily through solids and some gases.
B. Light is unable to travel through gases but does travel through liquids and solids.
C. Light travels easily through liquids and gases, as well as through some solids like
glass.
D. Light travels easily through solids but is unable to travel through liquids and gases.
(20 points!)
Answer:
C number is write i think
The element which does not show variable valency a) AI b)Fe c) Cu d) Hg
Answer:
None of these elements.
-
9 Two bodies of 6 kg and 4 kg masses have their
velocity 5i - 2j +10k and 10î – 2ġ +5ť,
respectively
. Then, the velocity of centre of me
(a) 5ỉ +23 - 8 (b) 7î+ 29 - 8
(2) 7î – 2į +8ỉ (d) 5î – 29 +8k
+
-
Answer:
I don't know he he.
just joking
How are a series and parallel car different?
To get the dimmest bulbs with two batteries and two bulbs you would connect the batteries in ____ and the bulbs in ____.
Answer:
batteries in parallel connection and bulbs in serial connection
To get the dimmest bulb with two batteries and two bulbs you would connect the batteries in parallel and the bulbs in series.
What is Parallel and series circuits?When two-terminal components and electrical networks that can be connected in series or parallel. This will result in two terminals in the electrical network, and may themselves participate in a series or parallel topology. When a two-terminal "object" is an electrical component or electrical network is a matter of perspective.
A circuit is said to be in series when the same current flows through all the components in the circuit where the current has only one path. A circuit is said to be parallel when there are multiple paths for the electric current to flow through it where the components which are part of the parallel circuit will have a constant voltage across all their ends.
Thus, to get the dimmest bulb with two batteries and two bulbs you would connect the batteries in parallel and the bulbs in series.
Learn more about Parallel and series circuits, here:
https://brainly.com/question/3386214
#SPJ5