Answer:
40.0L is the volume the CO occupy
Explanation:
To solve this question we must assume the gas is at STP. To find the volume of a gas using the moles, temperature and pressure of the gas we have to use:
PV = nRT
V = nRT / P
Where V is volume in liters
n are moles of the gas -Molar mass CO: 28g/mol-
50.0g * (1mol / 28g) = 1.786 moles CO
R is gas constant = 0.082atmL/molK
T is absolute temperature = 273.15K at STP
P is pressure = 1atm at STP
Replacing:
V = 1.786moles*0.082atmL/molK*273.15K / 1atm
V = 40.0L is the volume the CO occupy
What do you think? Is our current understanding ofthe Universe backed up with facts? Is it a good theory
Answer:
Yes
Explanation:
The expansion of the universe is the increase in distance between any two given gravitationally unbound parts of the observable universe with time. It is an intrinsic expansion whereby the scale of space itself changes. The universe does not expand "into" anything and does not require space to exist "outside" it.
How many joules are required to melt 80 grams of ice to water at 0 C?
Explanation:
Its value is 6.02 kj/mol. This means for every mole of ice we melt we must apply 6.02 kj of heat. We can calculate the heat needed with the following equation:
q
=
n
×
Δ
H
where:
q
= heat
n
= moles
Δ
H
= enthalpy
In this problem we would like to calculate the heat needed to melt 35 grams of ice at 0 °C. This problem can be broken into three steps:
1. Calculate moles of water
2. multiply by the enthalpy of fusion
3. Convert kJ to J
Step 1: Calculating moles of water
35
g
×
(
1
m
o
l
18.02
g
)
=
1.94
m
o
l
s
Step 2: Multiply by enthalpy of fusion
q
=
n
×
Δ
H
=
1.94
×
6.02
=
11.678
k
J
Step 3: Convert kJ to J
11.678
k
J
×
(
1000
J
1
k
J
)
=
11
,
678
J
Finally rounding to 2 sig figs (since 34°C has two sig figs) we get
q
=
12
,
000
J
One last note, if the temperature were not 0 °C then the ice would have to be heated in addition to melted. This would be a phase change problem combined with a heat capacity problem.
If you want 1,775 mL of 48 M MgCl2 solution, how many grams of MgCl2 do you need?
Round answer to 0.1 decimal
Answer:
0.1
Explanation:
Floodplains extend from one side of the river valley to the other.
True or False
Answer:
true
Explanation:
hope this helps!
~mina-san
Answer:
Explanation: true
Which of the chemicals in the following chemical reaction is the conjugate base?
CH3COOH + CH3NH2 --> CH3C00- + CH3NH3+
A.)CH3NH2
B.)CH3COO
C.)CH3COOH
D.)CH3NH3+
A) CH3NH2
This is because CH3NH2 recieved H from CH3COOH
What is the total volume that you have if you calculated that it weighs 180g?
The mass of the sun is about 1.98 x 10^30 kilograms. The mass of the earth is 5.97x 10^24 kilograms. The mass of the sun is how many times greater than the mass of
the earth?
Answer:
Explanation:
The mass of the sun is about 1.98 x 10^30 kilograms. The mass of the earth is 5.97x 10^24 kilograms.
1.98 x 10^30 / 5.97x 10^24 = 331658 times greater
Answer:
Explanation:
The mass of the sun / the mass of the earth
= 1.98 x 10^30 / 5.97x 10^24
= 3.32 x 10^5 times greater
225.0 mL of air is at 23.0°C. What is the volume at 90.0 °C?
Answer:
276 mL
Explanation:
Using Charles law equation as follows:
V1/T1 = V2/T2
Where;
V1 = initial volume (mL)
V2 = final volume (mL)
T1 = initial temperature (K)
T2 = final temperature (K)
According to the information provided in this question;
V1 = 225mL
V2 = ?
T1 = 23°C = 23 + 273 = 296K
T2 = 90°C = 90 + 273 = 363K
Using V1/T1 = V2/T2
225/296 = V2/363
Cross multiply
296 × V2 = 363 × 225
296V2 = 81675
V2 = 81675/296
V2 = 275.9
V2 = 276 mL
State of Matter
Can someone help me ?
Answer:
HBrO forms hydrogen bonds with each other and with water
Acetic acid forms hydrogen bonds with each other and with water
Formaldehyde can't form hydrogen bonds to each other but do form hydrogen bonds with water.
Explanation:
The hypohalous acids are polar molecules hence they form intermolecular hydrogen bonds. They also form hydrogen bonds with water. This enables it to dissolve in water.
Acetic acid can form dimmers with each other due to hydrogen bond formation. Also, acetic acid is capable of forming hydrogen bonds with water. This enables acetic acid to dissolve in water.
Aldehydes do not form intermolecular hydrogen bonds with each other because there is no hydrogen atom attached directly to oxygen in aldehydes. As such, they can only form hydrogen bonds with water. This accounts for the water solubility of low molecular weight aldehydes. Hence, formaldehyde can't form hydrogen bonds to each other but do form hydrogen bonds with water.
answer truthfully:))
Answer:
Formula: [tex]Velocity \: V = f \lambda \\ Solution: = 5 \times 0.8 \\ = 4 \: {ms}^{ - 1} [/tex]
Answer:
The first guy is correct. That's what I got too
Convert 338 L at 3.0 atm to its new volume at standard pressure. 1,014L
Answer:
1014 L
Explanation:
From the question,
Applying
PV = P'V'.................... Equation 1
Where P = initial pressure, P' = Final pressure, V = Initial volume, V' = Final volume
make V' the subject of the equation
V' = PV/P'........... Euqation 2
Given: P = 3 atm, V = 338L, P' = 1 atm (Standard pressure)
Substitute into equation 2
V' = (3×338)/1
V' = 1014 L
Hence the new volume is 1014 L
what may happen when two light waves traveling from oposite directoins meet?
Answer:
The meet
Explanation:
1) How different is salt
reaction
from a chemical
Answer:
How different is salt
Explanation:
Salt, in chemistry, substance produced by the reaction of an acid with a base. The reaction between an acid and a base is called a neutralization reaction. The term salt is also used to refer specifically to common table salt, or sodium chloride.
Which two statements describe organ systems working together to remove
wastes from the body?
A. The integumentary system gives off thermal energy that comes
from blood vessels.
B. The digestive system breaks down food into molecules that can
move into the blood.
C. The circulatory system carries oxygen-rich blood into muscles in
the legs.
D. The respiratory system exhales carbon dioxide that enters the
lungs from blood vessels.
is visible light considered matter true or false
Answer:
Explanation:
false
1: At which temperature would a reaction withΔH = -102 kJ/mol, ΔS = -0.188 kJ/(mol×K) be spontaneous? 2: At which temperature would a reaction withΔH = 132 kJ/mol, ΔS = 0.200 kJ/(mol×K) be spontaneous?
Answer:
1: At temperatures below 542.55 K
2: At temperatures above 660 K
Explanation:
Hello there!
In this case, according to the thermodynamic definition of the Gibbs free energy, it is possible to write the following expression:
[tex]\Delta G=\Delta H-T\Delta S[/tex]
Whereas ΔG=0 for the spontaneous transition. In such a way, we proceed as follows:
1:
[tex]0=\Delta H-T\Delta S\\\\T=\frac{-102kJ/mol}{-0.188kJ/mol-K} \\\\T=542.55K[/tex]
It means that at temperatures lower than 542.55 K the reaction will be spontaneous.
2:
[tex]0=\Delta H-T\Delta S\\\\T=\frac{132kJ/mol}{0.200kJ/mol-K} \\\\T=660K[/tex]
It means that at temperatures higher than 660 K the reaction will be spontaneous.
Best regards!
Question 1 of 10
Which of these is an advantage of wind energy?
A. It increases greenhouse gas emissions,
B. It generates noise pollution,
c. It generates electricity
0
D. It reduces bird and bat populations.
How many moles contain 9.75x10^20 molecules of carbonic acid?
Answer:
1 mole of carbonic acid=6.023×10^23 molecules
now
9.74×10^20molecules=
1/(6.023×10^23 molecules)×9.74×10^20molecules
=1.617×10^-3 mole
is your answer.
Calculate the pH at the equivalence point for titrating 0.200 M solution of benzoic acid with 0.060 M NaOH. Ka for benzoic acid is 6.3 x10^-5
Answer:
[tex]pH=8.43[/tex]
Explanation:
Hello there!
In this case, since the reaction between benzoic acid and sodium hydroxide is carried out in a 1:1 mole ratio, it is possible to calculate the moles of sodium benzoate salt that are produced due to the neutralization as show below:
[tex]n_{salt}=0.2mol/L*1L=0.2mol[/tex]
We can assume that the volume of benzoic acid is 1 L and therefore the used volume of NaOH is:
[tex]V_{NaOH}=\frac{0.200M*1L}{0.060M}=3.33L[/tex]
Which means that the total final volume is 4.33 L and the concentration of the resulting basic salt is:
[tex][salt]=\frac{0.2mol}{4.33L}=0.046M[/tex]
Next, since the salt is C6H5COONa, we can see it is ionized in Na+ cations and C6H5COO- anions, but just the latter is able to react with the water in the solution in order to undergo the following reaction:
[tex]C_6H_5COO^-+H_2O\rightleftharpoons C_6H_5COOH+OH^-[/tex]
Whose equilibrium expression, it terms of Kb, due to the release of OH- ions, is:
[tex]Kb=\frac{[C6H5COOH][OH^-]}{[C6H5COO^-]}[/tex]
And can be written in terms of x, Kw and Ka:
[tex]\frac{Kw}{Ka} =\frac{x*x}{0.046M-x} \\\\\frac{1x10^{-14}}{6.3x10^{-5}}=1.59x10^{-10}= \frac{x^2}{0.046M-x}[/tex]
And because Kb<<<<<1 we can neglect the x on the bottom to get:
[tex]1.59x10^{-10}= \frac{x^2}{0.046M}[/tex]
Whereas x is computed as follows:
[tex]x=\sqrt{1.59x10^{-10}*{0.046M} =2.7x10^{-6}M[/tex]
Which is actually equal to the concentration of OH- ions so that we can calculate the pOH prior to the pH:
[tex]pOH=-log(2.7x10^{-6})=5.57[/tex]
And therefore the pH as shown below:
[tex]pH=14-5.57\\\\pH=8.43[/tex]
Which makes sense since this sodium benzoate is a basic salt.
Regards!
Which statement represents photosynthesis?
Answer:
brainliest plss
Explanation:
Photosynthesis is the process of converting light energy to chemical energy and storing it in the bonds of sugar. This process occurs in plants and some algae. Photosynthesis can be represented using a chemical equation.
20. Gabriel is determined to find the density of an unknown, irregularly shaped object. Using a digital scale to get the mass and the displacement method to get the volume, he records the following data: (6 points) Mass-19.37 g Initial volume-50.00 mL Final volume- 61.94 mL What is the density of the unknown object? PLEASE SHOW YOUR WORK!
Answer:
Density of irregular object = 1.62 g/mL
Explanation:
Density of a substance = mass of substance /volume of substance
Mass of substance as measured from the scale = 19.37 g
Volume of the object spins determined bynthe displacement method since itnis an irregular object. In this method, the object whose volume is required is immersed in a measuring cylinder containing a known volume of water. The new volume of water after the immersion of the object is recorded. The volume of the irregular object is then obtained by finding the difference between the final and initial volume of water. This is so because a solid immersed in a liquid will displace its own volume of the liquid.
Volume of irregular object = 61.94 mL - 50.0 mL = 11.94 mL
Density of irregular object = 19.37 g / 11.94 mL
Density of irregular object = 1.62 g/mL
Identify the gas law that applies to the following scenario: If a gas in a closed container is pressurized from 18.0 atm to 14.0 atm and its original
temperature was 35.0°C, what would the final temperature of the gas be?
Charles' Law
O Avogadro's Law
O Boyle's Law
O Gay-Lussac's Law
Answer:
Gay-Lussac's Law
Explanation:
The pressure is directly proportional to the absolute temperature under constant volume. This states the Gay-Lussac's law. The equation is:
P1T2 = P2T1
Where P is pressure and T absolute temperature of 1, initial state and 2, final state of the gas.
That means the right option is:
- Gay-Lussac's Law
A gas is heated from 263.0 K to 298.0 K and the volume is increased from 24.0 liters to 35.0 liters by moving a large piston within a cylinder. If the original pressure was 1.00 atm, what would the final pressure be?
Answer:
The final pressure is approximately 0.78 atm
Explanation:
The original temperature of the gas, T₁ = 263.0 K
The final temperature of the gas, T₂ = 298.0 K
The original volume of the gas, V₁ = 24.0 liters
The final volume of the gas, V₂ = 35.0 liters
The original pressure of the gas, P₁ = 1.00 atm
Let P₂ represent the final pressure, we get;
[tex]\dfrac{P_1 \cdot V_1}{T_1} = \dfrac{P_2 \cdot V_2}{T_2}[/tex]
[tex]P_2 = \dfrac{P_1 \cdot V_1 \cdot T_2}{T_1 \cdot V_2}[/tex]
[tex]P_2 = \dfrac{1 \times 24.0 \times 298}{263.0 \times 35.0} = 0.776969038566[/tex]
∴ The final pressure P₂ ≈ 0.78 atm.
The anion sbf4− does not obey the octet rule. draw its lewis structure and state the type of octet-rule exception. indicate the values of nonzero formal charges and include lone pair electrons.
Answer:
SEE EXPLANATION
Explanation:
The ion SbF4^- is octahedral in shape. In this compound, Sb which is the central atom in SbF4^- has an expanded octet. This means that it has more than eight electrons in its outermost shell thereby violating the octet rule. Hence the type of violation to the octet rule shown by the compound is expanded octet.
The Sb central atom has a formal charge of -1 as shown in the image attached to this answer.
What should be the labels on the X-axis and Y-axis?
Answer Is Any Real Numbers, Such As 6,15,21.
If you came upon an aqueous solution in the lab which reacted with a strip of magnesium , you could make the hypothesis that the compound in this solution is :
a . an acid
b . a base
C. a salt
Answer: A
Explanation: Bases Don't react with metals, acids do. Salt tend not to have that sort of reaction either.
Since dilute acids can react with metal strips, the solution must be an acid.
What is an acid?An acid is a substance that produces the hydrogen ions in solution. We should note that one of the properties of acids is that their dilute solutions are able to react with metals to evolve hydrogen gas.
As such, if the solution can react with a strip of magnessium then the solution must be an acid.
Learn kore about acids: https://brainly.com/question/365923
What are some facts about Radon?????
Answer:
Explanation:
Radon is radioactive.
Radon is a naturally occurring radioactive gas.
Radon causes cancer.
Breathing radon can increase your risk of developing lung cancer.
No immediate symptoms.
You must test for radon.
Radon is present indoors and outdoors.
Radon can build up in any building.
Answer: No but I have a three elmos dolls in my basement
Explanation:
Please answer quick!!
Which statement best explains how sexual reproduction increases variation within a species?
A. It causes the genes of two different individuals to mix.
B. It changes the base sequence of an organism's DNA.
C. It changes the trait that a given gene produces.
D. It copies one parent's genes to make each offspring.
Answer:
A
Explanation:
it causes the genes of two different individuals to mix
Answer:
Explanation:
A. It causes the genes of two different individuals to mix.
When fluorine gas is put into contact with calcium metal at high temperatures, calcium fluoride powder is created in an exothermic reaction
Answer:
True,When fluorine gas is put into contact with calcium metal at high temperatures, calcium fluoride powder is created in an exothermic reaction.
If Steve throws the football 50 meters in 5 seconds, what is the average speed of the football?
Answer:
10 meters per second
Explanation: