What would be the electron configuration for neutral oxygen? Please show what energy level each electron is in using the electron diagonal filling rule do not use noble gas configuration.

Answers

Answer 1

Answer: 1s2 2s2 2p4

Explanation:

Recall the number of electrons an orbital can have:

s orbitals have 2, p orbitals have 6, d orbitals have 10, f orbitals have 14, and so on.

Oxygen in its neutral state would have 8 electrons.

To summarize the diagonal filling order, it goes from the least energy level to the most, and the orbital with the least amount of orbitals to the most.

So, the order for this will go from 1 and end at 2 (for energy level,) then s, s again (as energy level 1 has 1s orbital only,) and p.

So, the first energy level, 1s2 (2 electrons), leaves the remaining six electrons.

Completely fill the s orbital (another 2 electrons), and the remaining 4 electrons will be in the respective p orbital.

Thus, it is 1s2 2s2 2p4.


Related Questions

a) S₂08²+ I- ----> I3- + SO₂ The reaction is carried out in a basic solution. Express a balanced redox equation using the ion-electron method.​

Answers

Answer:

The ion-electron method involves breaking the reactants into their component ions and transferring electrons between the ions to balance the charge and the atoms. In a basic solution, the S²⁰⁸² ion will gain two electrons to form SO₂. The I¹⁻ ion will lose one electron to form I³⁻. The balanced redox equation using the ion-electron method is:

S²⁰⁸² + 2e⁻ + 2OH⁻ → SO₂ + H₂O

I¹⁻ + e⁻ → I³⁻

The overall balanced equation is:

2S²⁰⁸² + 2OH⁻ + I¹⁻ → 2I³⁻ + SO₂ + H₂O

8. Jill conducted an experiment to investigate which plant food would make her
plants grow faster. She tried four different plant foods on plants of the same
type and age. Jill concluded that the plant that was fed Brand A grew the
fastest. Jill did not realize that the plant that was fed Brand A also received
more sunlight. (SC.7.N.1.5.3)
What error did Jill make in her experiment?
a) She used the wrong kind of plant.
b) She used too much plant food.
c) She did not control the variables.

Answers

the answer is cccccc
c) She did not control the variables.

In her experiment, Jill did not take into account the fact that the plant that was fed Brand A also received more sunlight. This means that there is another variable, besides the plant food, that could have affected the growth rate of the plant. By not controlling this variable, Jill's conclusion that Brand A was the best plant food may not be accurate. To properly control variables and make a valid conclusion, Jill should have ensured that all plants received the same amount of sunlight, or use other methods to control this variable as well.

If 467.08 grams of Oz are reacted, how many grams of C6H5CH3 will also be reacted?

Answers

In order to react with 467.08 grams of O2, 4034.95 g of toluene (C6H5CH3) is required.

What are some uses for toluene?

Toluene is a white liquid hydrocarbon found in petroleum and coal tar that is employed like a solvent and in the synthesis of organic compounds. Toluene is a naturally occurring substance found in crude oil and is used for oil refining as well as the production of glues, lacquers, paints, and explosives. Toluene can be discovered in household products like paint, paintbrush cleaner, nail polish, glue, inks, and stain removers.

For the balanced equation

2C6H5CH3 + 3O2 → 7CO2 + 4H2O

We required three steps

1.) Convert mass of O2 to mol of O2

mole = mass / molar mass

2.) Find mole of C6H5CH3 by multiply mol O2 by the mol ratio between O2 and C6H5CH3 in balanced equation.

3.) Find mass C6H5CH3 by multiply mol C6H5CH3 by its molar mass (92.14 g/mol)

= 467.08 gm /15.999 gm × 3/ 2 ×92.14 gm

= 4034.95 gm. of C6H5CH3

To know more about Toluene visit :

https://brainly.com/question/6181289

#SPJ1

A scientist did a test to compare two substances: substance Q and substance R. At room temperature, both substances are liquid. When the scientist transferred the same amount of energy out of both substances, only one substance changed phase while the other did not. Which substance changed phase, and how did it change?
Responses

a
Substance Q changed phase because the attraction of the molecules was able to overcome their slower movement. Its molecules now move in place.
Substance Q changed phase because the attraction of the molecules was able to overcome their slower movement. Its molecules now move in place.

b
Substance Q changed phase because the strong attraction between molecules made their movement slower. Its molecules now move in place.
Substance Q changed phase because the strong attraction between molecules made their movement slower. Its molecules now move in place.

c
Substance R changed phase because the weak attraction between molecules let them move faster. Its molecules now move around each other.
Substance R changed phase because the weak attraction between molecules let them move faster. Its molecules now move around each other.

d
Substance R changed phase because the attraction was able to overcome the slower molecules. Its molecules now move away from each other.
Substance R changed phase because the attraction was able to overcome the slower molecules. Its molecules now move away from each other.

Answers

Substance R changed phase because the weak attraction between molecules let them move faster.  Option C

What is phase change?

We know that a change of phase has to do with the movement of a material from a given state of matter to the other. Net us note that when there is a change of state, we are going to notice that the force of attraction in the molecule would also change.

Since we know that the substance that we have are liquid at room temperature, we know that the supply of some energy may cause to be bale to change its phase.

Learn more about phase change:https://brainly.com/question/12390797

#SPJ1

ammonia chemically reacts with oxygen gas to produce nitric oxide and water. what mass of oxygen gas is consumed by the reaction of 8.4 g of ammonia?

Answers

the mass of nitric oxide produced by the reaction of 8.4 g of oxygen gas is 4.32 g. ammonia chemically reacts with oxygen gas to produce nitric oxide and water.

What oxygen is used for?

Common uses of oxygen include production of steel, plastics and textiles, brazing, welding and cutting of steels and other metals, rocket propellant, oxygen therapy, and life support systems in aircraft, submarines, spaceflight and diving.

Why is oxygen important?

Oxygen helps organisms grow, reproduce, and turn food into energy. Humans get the oxygen they need by breathing through their nose and mouth into their lungs. Oxygen gives our cells the ability to break down food in order to get the energy we need to survive.

To know more about oxygen visit

https://brainly.com/question/13370320

#SPJ1

Are all antigens foreign substances?

Answers

No, not all antigens are foreign substances.

An antigen is any substance that can trigger an immune response, including the production of antibodies. Some antigens are naturally present in the body and are called "self" antigens which are usually not harmful, but in some cases, the immune system can mistakenly recognize them as foreign and attack them which can lead to autoimmune diseases.

Antigens bind together with antibodies and promote the elimination of harmful pathogens present in the body. They alert other parts of the immune system to take over which helps to neutralize the threat from pathogens.

To learn more about antigen:

brainly.com/question/15694610

determine the amount of time it takes for 3/4 of a radioactive sample of an isotope of bromine to decay. The half-life of the isotope is 16.5 hours.

Answers

Based on the given half-life, the amount of time it takes for 3/4 of a radioactive sample of an isotope of bromine to decay is 33 hours.

What is the half-life of a radioactive isotope?

The time needed for a quantity to decrease to half of its initial value is known as the half-life. In nuclear physics, the phrase is frequently used to indicate how rapidly unstable atoms decay radioactively or how long stable atoms last.

Any substance that contains unstable atoms that release ionizing radiation during their natural decay is considered radioactive material.

Given the half-life of the radioactive sample of an isotope of bromine to be 16.5 hours. The amount of time it takes for 3/4 of a radioactive sample of an isotope of bromine to decay is calculated as follows:

After one half-life, half of the sample remains, and half decays

After two half-lives, 1/4 of the sample remains, and 3/4 decays

The time for two half-lives = 16.5 hours * 2

The time for two half-lives = 33 hours.

Learn more about half-lives at: https://brainly.com/question/1160651

#SPJ1

. If a balloon will rise off the ground when it contains 0.0226 mol of helium in a volume of 0.460 L, how many moles of helium are needed to make the balloon rise when its volume is 0.865 L? Assume that temperature and pressure stay constant.

Answers

The number of moles of helium (He) needed to make the balloon rise is 0.043 moles.

How to calculate number of moles?

The number of moles of a gas can be calculated using the following expression:

V₁/n₁ = V₂/n₂

Where;

V₁ = initial volumen₁ = initial moles V₂ = final volumen₂ = final moles

Avogadro’s law to predict what will happen to the volume of a sample of gas as we change the number of moles. Because V/n is a constant for any given sample of gas (at constant P and T).

At constant temperature and pressure the volume of a gas is directly proportional to the number of moles of gas.

0.46/0.0226 = 0.865/n

20.3539823n = 0.865

n = 0.043 moles

Therefore, 0.043 moles is the number of moles of the gas when the balloon rises.

Learn more about Avogadro's law at: https://brainly.com/question/4133756

#SPJ1

_____ molecules are always synthetic.

Answers

A synthetic ingredient is a substance that has been synthesized in a lab using different chemical procedures. Its goal is to mimic a natural chemical to duplicate its structure and, consequently, its fragrance.

What is synthetic ingredient?

In most cases, it refers to a naturally occurring substance, like hyaluronic acid, which was formerly extracted from animals and has now been molecularly copied in a laboratory to provide the same results. Not everything that is manufactured or chemical is inherently harmful to you. Although not all synthetic cosmetic components are the same, some have been proven to be toxic, accumulate in the body over time, and have been associated with cancer as well as irritations of the skin and mucous membranes.

To know more about synthetic ingridient, check out:

https://brainly.com/question/29774084

#SPJ1

help me i need it asap


Which example is a biotic factor of an aquarium ecosystem?

plastic plants placed in the gravel

algae growing on the glass

rock structure

gravel on the bottom of the aquarium


Which examples are an abiotic factor of an aquarium ecosystem? Select all that apply.

rock structure

temperature of the water

amount of algae on the glass

number of fish


Which example describes an abiotic factor interacting with a biotic factor?

The temperature of the air affecting the wind direction

Water eroding a rock

Cows eating nearby grass

The amount of sunlight affecting the growth of a plant.


Students in Ms. Brown's class are making observations in the garden outside of the school. They make a list of all the abiotic and biotic factors in their notebook. Part of the list is below:

Gravel
Grass
Butterfly
Sunflower
Bird feeder
Flowerpots

Which items on the list are a part of the garden ecosystem?

Grass, butterfly, sunflower

None of the listed items are a part of the ecosystem

All the listed items are part of the ecosystem

Gravel, bird feeder, flowerpots

Answers

The biotic factor of an aquarium ecosystem is algae growing on the glass.

The abiotic factors of an aquarium ecosystem are rock structure, temperature of the water, and amount of sunlight.

The example that describes an abiotic factor interacting with a biotic factor is the amount of sunlight affecting the growth of a plant.

All the listed items in Ms. Brown's class, including gravel, grass, butterfly, sunflower, bird feeder, and flowerpots, are a part of the garden ecosystem.

What is an ecosystem?

An ecosystem is a community of living organisms (biotic factors) interacting with each other and with their physical environment (abiotic factors) in a specific area. It includes all the living and non-living components of the environment that interact with each other. Examples of ecosystems include a coral reef, a forest, a desert, and even an aquarium or a garden. Ecosystems can be large or small and can be found on land or in water. They are essential for the survival of living organisms as they provide food, shelter, and other resources necessary for life.

Read more on ecosystem here:https://brainly.com/question/842527

#SPJ1

Compared to a human, what is similar about how blue whales get molecules from food and air?

Answers

Answer:  Blue whales, like humans, obtain molecules from food and air through a process of digestion and respiration. During digestion, molecules in food are broken down and absorbed into the bloodstream, while during respiration, oxygen molecules in the air are absorbed into the bloodstream. Both processes enable blue whales to obtain the necessary molecules for energy, growth, and development.

Balance the following Equation (do not leave any empty blanks, you must enter 1 if the value is 1):
___ Na2S + ___ HCl --> ___ NaCl + ___ H2S
(Refer to image)
What type of reaction is it?
(Question one is a _______ type of reaction.)

Answers

Answer: this looks hard

Explanation:

Answer:

1 Na2S  + 2 HCl  ===>   2 NaCl  + 1 H2S

In these reactions, two compounds exchange ions to form two new compounds.

Explanation:

--- Na2S + ---- HCl ===> ---- NaCl  + ---- H2S

Na  =  2                                  Na = 1 * 2 = 2

S  = 1                                       S = 1

H = 1 * 2 = 2                             H = 2

Cl = 1 * 2 = 2                            Cl = 1 * 2 = Cl

In these reactions, two compounds exchange ions to form two new compounds.

REACTION TYPE:

DOUBLE DISPLACEMENT REACTION/DOUBLE REPLACEMENT

I hope that helps, have a wonderful day!!!!

Balancing chemical reactions. What is it and examples

Answers

Answer: A balanced chemical reaction is A balanced chemical equation where the number of atoms of each type in the response is the same on both reactants and product sides.

Explanation: Burning, and cooking are 2 examples.

For the reaction C + 2H2 → CH4, how many grams of carbon are required to produce 14 moles of methane, CH4 ?

Round your answer to the nearest tenth. If you answer is a whole number like 4, report the answer as 4.0

Use the following molar masses. If you do not use these masses, the computer will mark your answer incorrect.:
Element Molar Mass
Hydrogen 1
Carbon 12

Answers

The amount, in grams, of carbon required to produce 14 moles of methane according to the reaction would be 168.0 grams.

Stoichiometric problem

From the balanced equation of the reaction, the mole ratio of the carbon that reacts and the methane produced is 1:1. In other words, 1 mole of carbon will produce 1 mole of methane.

Thus, for the production of 14 moles of methane:

1 mole methane = 1 mole carbon

14 moles methane = 14 x 1/1 = 14 moles carbon.

Recall that, mass = mole x molar mass.

The molar weight of carbon is given as 12 g/mol

Mass of 14 moles carbon = 14 x 12 = 168 grams

In other words, for the illustrated reaction, the amount of carbon required to produce 14 moles of methane would be 168.0 grams.

More on stoichiometric problems can be found here: https://brainly.com/question/29775083

#SPJ1

How many grams are in 4.2 × 10²² atoms of iron?​

Answers

Answer:0.226 gram

Explanation:you can get the answer in two steps calculate 3.40 . 10^22 atoms =

Answer:

4.2 × 10²² ÷ 6.022× 10²³

4.2 × 10²² equals 0.069 moles (approx)

weight of 1 mole of iron = 56g

therefore, 0.069 moles = 56 × 0.069 = 3.9 g

Sorry for lazy work.. :P

Imagine that you are a scientist working in a very dry desert environment. This location has been experiencing a terrible drought, so there has been very little rainfall over the last few years. The drought is affecting the local farms, especially the farms that grow corn. You are asked to help choose a variety of corn that will grow the best in these drought conditions.

Which of the four varieties of corn that you tested in the lab would you choose?

Sunburst Variety
Golden Kernel Variety
Chok Full 'O Goodness Variety
Cob-o-Rama Variety

Why do you think this variety is the best choice?

Answers

Based on the information provided, I would recommend the Sunburst Variety of corn as the best choice for growing in the drought conditions of the desert environment.

What is the corn about?

Sunburst Variety of corn has been specifically developed to be drought-tolerant, meaning that it can survive and produce a good yield even with minimal rainfall.

Therefore, I would recommend the Sunburst variety of corn as the best choice for growing in the desert environment due to its drought-tolerance, deep root system, heat tolerance, high yield, and good quality grain.

Learn more about corn from

https://brainly.com/question/397421

#SPJ1

Due to friction between a tire and the road surface, the temperature of the air inside a tire increases as one drives. if the tire pressure is 179 kPa when the car is in the driveway at 5.0 C, what is the pressure of the gas inside the tire when the temperature of the gas increases to 35 C? Assume tire volume and number of particles remain constant

Answers

Answer:

40.10 atm. is answer i think ....

C(s) + O2(g) → CO2(g) ΔHº = -94.6 kJ

H2(g) + \scriptsize \frac{1}{2}O2(g) → H2O(l) ΔHº = -286.0 kJ

2C2H2(g) + 5O2(g) → 4CO2(g) + 2H2O (l) ΔHº = -2598.8 kJ

calculate the value of ΔHº for the final reaction:

2C(s) + H2(g) → C2H2(g) ΔHº = kJ

Answers

The value of enthalpy(ΔHº) for the final reaction (2C(s) + H₂(g) → C₂H₂(g) ) is  -1932.8KJ.

Enthalpy change: what is it?

A system's enthalpy is its heat capacity. A reaction's enthalpy change is roughly equivalent to how much energy is lost or gained throughout the reaction. If the enthalpy of the system decreases over the reaction, the reaction is preferred.

C(s) + O₂(g) → CO₂(g) ΔHº = -94.6 kJ --- (1)

H₂(g) + O₂(g) → H₂O(l) ΔHº = -286.0 kJ ---(2)

2C₂H₂(g) + 5O₂(g) → 4CO₂(g) + 2H₂O (l)  ΔHº = -2598.8 kJ ---(3)

The value of ΔHº for the final reaction,

2C(s) + H₂(g) → C₂H₂(g)

ΔH₄° = 2× ΔH₂º +  ΔH₃º - ΔH₁º
ΔH₄° = 2× -286.0 + ( -2598.8) - (- 94.6)

ΔH₄° = 2× -286.0 -2598.8 + 94.6

ΔH₄° = 666 - 2598.8

ΔH₄° = -1932.8KJ.

To know more about enthalpy visit:  

https://brainly.com/question/13979547

#SPJ1

I need help with how to do question c, d, and e

Answers

The answer of the following question of concentration are:

c) The law expression for this reaction is k[A].

d) The value of k including its units is  on the specific reaction.

e) The half-life of the reaction is T1/2 = 0.693/k.

What is concentration?
Concentration
in chemistry is a measure of the amount of a substance that is present in a given volume. It is usually expressed in terms of mass, moles, or volume.

c) The law expression for this reaction is rate = k[A], where k is the rate constant. This is because in a first-order reaction, the rate of reaction is proportional to the concentration of the reactant.

d) The value of k depends on the specific reaction, and can be determined by measuring the reaction rate at different concentrations of A and plotting a graph of rate versus concentration of A.

e) The half-life of a first-order reaction is given by T1/2 = 0.693/k, where T1/2 is the half-life and k is the rate constant. The units of the half-life are seconds.

To learn more about concentration
https://brainly.com/question/26255204

#SPJ1

What's the lewis structure of NO3- and O3?
I end up finding the apparently wrong ones for both, and am probably missing out on an important notion.

Answers

The lewis structure of NO₃⁻ is trigonal planar and the Lewis structure of ozone (O₃) has a resonance form.

What are Lewis structures?

Lewis structures which are also often referred to as Lewis dot formulas, Lewis dot structures, electron dot structures, or Lewis electron dot structures, depict the interactions between the atoms in a molecule as well as any lone pairs of electrons that may be present.

NO₃⁻ has a trigonal planar Lewis structure. It has one nitrogen atom, three oxygen atoms, and covalent bonds holding the three oxygen atoms together. The sp² hybridization of the nitrogen atom gives NO₃⁻- its trigonal planar structure.

Three oxygen atoms make up the oxygen allotrope known as ozone (O₃). One double bond and one single bond make up the Lewis structure of ozone. Additionally, two oxygen atoms in the Lewis structure of O3 carry charges.

Learn more about Lewis structures at: https://brainly.com/question/20300458

#SPJ1

in this task, you’ll observe a chemical reaction between baking soda and vinegar. How do you think the temperature of the reactants and the rate of reaction are related? Write a hypothesis to predict the relationship between the two parameters.

Answers

The temperature of both the reactants and the pace of reaction are correlated in the chemical reaction of baking soda and vinegar the warmth of the reactants causes a raise in the rate of action and vice versa.

Which is a chemical reaction *?

When two or more compounds come into touch with one another and create a new substance, the process is known as a chemical reaction (s). Reactants or reagents are the name(s) for the substance(s) or substances that are initially incorporated into the chemical process.

What's the most important chemical reactions?

A few synthesis processes can produce several products. One of the more significant chemical processes on Earth is photosynthesis. It enables some microorganisms and plants to transform carbon dioxide gas and water into storable glucose and oxygen. For life to exist on Earth, we need this oxygen.

To know more about Chemical reaction visit:

https://brainly.com/question/29762834

#SPJ1

What is the molecular weight of (NH4)2SO4

Answers

The molecular weight of [tex](NH_4)_2SO_4[/tex] would be 132 g/mol.

Calculation of molecular weights

The molecular weight, otherwise known as the molar mass of substances is the sum of the molar weights of individual atoms that make up the substance.

[tex](NH_4)_2SO_4[/tex] is made up of 2 atoms of N, 8 atoms of H, 1 atom of S, and 4 atoms of O.

Molar weight of N is 14 g/molMolar weight of H is 1 g/molMolar weight of S is 32 g/molMolar weight of O is 16 g/mol

Thus, the molecular weight of [tex](NH_4)_2SO_4[/tex] = (14x2) + (1x8) + 32 + (16x4)

                                                                     = 132 g/mol

In other words, the molecular weight of [tex](NH_4)_2SO_4[/tex] is 132 g/mol.

More on molecular weights can be found here: https://brainly.com/question/14507491

#SPJ1

No Constant Variable
A 2.00L sample of gas at STP is heated to 500K and compressed to 200 kPa. What is
the new volume of the gas?
I’ll give you all my points

Answers

The new volume of the gas will be 1.85L.

The three gas laws are what?

According to Boyle's Law, as pressure lowers, gas volume grows. According to Charles' Law, when the temperature rises, the volume of the gas also rises. Avogadro's Law also states that as the amount of gas increases, so does the volume of the gas.

Given, initial volume of gas V1 = 2L

initial temp T1 = 273K

initial pressure P1 = 101.3 kPa

final temperature, T2 = 500K

Final pressure, P2 = 200 kPa

let final or new volume be V,

now for a constant moles of gas,

by using ideal gas equation,

P1×V1/T1 = P2×V/T2

101.3×2/273 = 200×V/500

202.6/273 = 2V/5

V = 0.742×5/2

V = 1.85 L

The new volume of the gas will be 1.85L.

To know more about Gas laws visit

https://brainly.com/question/12669509

#SPJ1

Why atoms form compounds

Answers

Answer:

Because the atoms are trying to reach the most stable ( lowest energy ) state they can.

Map of structure of an Atom?

Answers

Atoms are made up of a very tiny, positively charged nucleus that is encircled by a sea of negatively charged electrons. Despite often being less than a tenth of an atom's size, the nucleus makes up more than 99.9% of the atom's mass.

What is the structure of an Atom?

The term "atomic structure" describes the structure of an atom, which has a nucleus (centre) that contains both protons (positively charged) and neutrons (neutral). The centre of the nucleus is circled by the negatively charged electrons.

Positively charged protons, negatively charged electrons, and neutral neutrons make up the three types of subatomic particles that make up an atom. Nearly equal in mass, protons and neutrons are found in the dense nucleus of the atom.

Thus, Atoms are made up of a very tiny, positively charged nucleus that is encircled by a sea of negatively charged electrons.

To learn more about an atom, follow the link;

https://brainly.com/question/29695801

#SPJ1

This is Yolanda's desk. What could Yolanda do to increase the amount of force needed to move the desk?

Answers

Answer:

The last one.

Explanation:

The other ones add more force or give the same but the last one reduces it.

Need help ASAP 100 points!
How many molecules are in 2.3 moles of Oxygen?

Question 1 options:

2.06 x 1023 molecules


6.02 x 1023 molecules


1.4 x 1023 molecules


3.8 x 1023 molecules

Answers

1.4 x 1023 molecules are present in 2.3 moles of oxygen.

How many molecules will be in the 2.3 moles of oxygen?

We know that if we multiply the 2.3 moles of oxygen with Avogadro's number which is 6.023 x 1023 then this will give us the number of molecules which is present in the 2.3 moles of oxygen and which is 13.85 x 1023.

Mole is a standard scientific unit for measuring large quantities of very small entities like atoms, molecules, or other specific particles. The mole entitles an extremely large number of units about 6.02214076 × 1023.

So we can conclude that by multiplying Avogadro's number with the 2.3 moles of oxygen then it will give us 1.4 x 1023 molecules.

Learn more about Molecules here: https://brainly.com/question/26044300

#SPJ1

Please show all of your work, I need to understand all steps:
A student collected time (t) and concentration ([A]) data at
295 K for the reaction 2A→B. These time and concentration data are shown in the table to the right. The student then plotted graphs of [A] versus t (Figure 1) , ln[A] versus t (Figure 2) , and 1/[A] versus t (Figure 3) .
Figure 1:
t (s) (A)(M) ln(A) 1/ (A)
0.00 0.500 −0.693 2.00
20.0 0.389 −0.944 2.57
40.0 0.303 −1.19 3.30
60.0 0.236 −1.44 4.24
80.0 0.184 −1.69 5.43
i.) What is the rate of the reaction?
ii.) What is the value of the rate constant for this reaction?
iii.)
Next, the student ran the same reaction at a different temperature and measured a different reaction rate, with the following results:
T(K) k(s-1)
295 0.0125
325 0.0357
What is the activation energy of this reaction?
Express your answer to three significant figures and include the appropriate units.

Answers

Answer:

a because the x and y value is the same

Which of the following best represents the structure of an amino acid in basic solution (pH = 11)?

Answers

Answer:

Explanation:

In basic solution (pH = 11), an amino acid typically exists in its zwitterionic form. This means that the amino acid has both a positive and a negative charge, due to the presence of both a basic amino group (-NH2) and an acidic carboxyl group (-COOH).

The structure of an amino acid in basic solution (pH = 11) can be represented as follows:

The central carbon atom (also known as the alpha carbon) is bonded to a hydrogen atom, an amino group (-NH2), a carboxyl group (-COOH), and a side chain R group.

The amino group is positively charged due to the loss of a proton (H+).

The carboxyl group is negatively charged due to the gain of a proton (H+).

Overall, the amino acid has a net charge of zero, due to the equal and opposite charges of the amino and carboxyl groups. This is known as the zwitterionic form of the amino acid.

Here is a visual representation of the structure of an amino acid in basic solution (pH = 11):

H |

N-C-COOH

|

R

Regenerate response

Which of these is an example of a physical property?

A. Iron combines with oxygen to rust.

B. Potassium reacts in water to form a base.

C. Sodium metal is soft and malleable.

D. Sodium ignites when placed in water.​

Answers

Option C. Sodium metal is soft and malleable is an example of a physical property.

What is a physical property?

A physical property can be defined as any feature of a substance that can be really observed and also measured without changing its chemical composition such as for example, the color, density of a metal, boiling point, conductivity, etc.

Therefore, with this data, we can see that physical properties have a significant impact on the performance and use of a given chemical product and they are associated with intrinsic features of the chemical material that forms molecules.

Learn more about physical properties here:

https://brainly.com/question/12330204

#SPJ1

Other Questions
What does it mean to revise an essay? What is the central idea of this excerpt?O the power of love the value of peace the ruthlessness of power the importance of compromise What is the smallest positive integer that is both a multiple of $7$ and a multiple of $4$? What are 3 examples of inalienable or natural rights? 1. Explain what you observed at the Walmart shareholders meeting. 2. Explain how Walmart able keeps track of its inventory. Why is this important sedimentary rocks are formed due to the (4 points) group of answer choices cooling of magma weathering of rocks changes in pressure changes in temperature A circle of radius 8 cm is cut into 6 partsof equal size, as shown in the diagram.Calculate the area of each part, givingyour answer correct to 2 decimal places. According to the circular-flow diagram GDP a. can be computed as either the revenue firms receive from the sales of goods and services or the payments they make to factors of production. b. can be computed as the revenue firms receive from the sales of goods and services but not as the payments they make to factors of production. c. can be computed as payments firms make to factors of production but not as revenues they receive from the sales of goods and services. d. cannot be computed as either the revenue firms receive or the payments they make to factors of production. The study of how students learn, the effectiveness of particular teaching techniques, the social psychology of schools, and the psychology of teaching is called Describe the Renaissance (what, where, when, effects, cause Summary of The school for good mothers Jessamine Chan Which expression simplifies to m-2 ?m-1 Equilibrium exists in a system where three forces are acting concurrently on an object. If the system includes a 5.0-newton force due north and a 2.0-newton force due south, the third force must be? What is rhe difference between Reforestation and Reclamation?? Answeres ASAP Baed on pat Supreme Court cae involving the Firt Amendment, explain whether the federal government ha the power to cancel the broadcat licene of a media company for tranmitting "fake new. "Which eay tructure i mot appropriate for thi prompt? Which term below refers to events that all have the same probability of occurring?(1) same chance occurrences(2) equal probability events(3) evenly divided happenings(4) equally likely outcomes Customary System Units Metric System Units 1 gallon 3.79 liters 1 quart 0.95 liters 1 pint 0.473 liters 1 cup 0.237 liters Approximately how many centiliters are in 3 quarts How accurate is BMI? Bjorn purchased a small duplex for use as a rental property. After the property was placed in service, he made some improvements, and later in the year, he made some repairs to the property. Which of the following statements regarding the treatment of the expenditures is CORRECT?A)The improvements and repairs must be capitalized.B)The improvements and repairs are currently deductible.C)The improvements are currently deductible; the repairs must be capitalized.D)The improvements must be capitalized; the repairs are currently deductible. Part D: Consider ConstraintsWhat limitations will there be to building an eco-friendly home in this neighborhood? Consider social, financial, and climate constraints while determining these limitations.