what would the net force be on the box in the problems shown below.( both force and direction).​ for all four diagrams. please explain answers.​

What Would The Net Force Be On The Box In The Problems Shown Below.( Both Force And Direction). For All

Answers

Answer 1

Answer:
A) object moves 20 N [West] or -20 N [East]
B) object moves 6 N [South] or -6 N [North]
C) object moves 90 N [West] or -90 N [East]
D) object does not move and is at rest*

*Rest means 0


Why:

A)both forces from north and south that are pushing against the object neutralize each other. Assume that north is positive and south is negative: 20 [N] + (-20) [S] = 0
On West and east, you can see that west has a greater force. Assume that west is negative and east is positive: 50 [E] + (-70) [W] = -20 [E]

Related Questions

A student heated 50mL of water from zero degree Celsius to 60 degree Celsius. How much energy did she use to heat the water? Remember cal = m x delta T

Answers

Answer:

Q = 12.5 kJ

Explanation:

Given that,

Mass of water, m = 50 mL = 0.05 kg

The temperature changes from 0 degree Celsius to 60 degree Celsius.

We need to find how much energy she use to heat the water. The energy required to heat the water is given by :

[tex]Q=mc\Delta T[/tex]

Where c is specific heat of water, c = 4186 J/kgºC

[tex]Q=0.05\times 4186 \times (60-0)\\\\=12558\ J[/tex]

or

Q = 12.5 kJ

So, the energy used to heat th water is 12.5 kJ.

Which of the following is true for valence electrons?
Valence electrons are always located in the outer most energy level.
Valence electrons are found only in radioactive isotopes.
Valence electrons are always located in the innermost energy level
Valence electrons are found only in negatively charged ions.

Answers

Answer:

Valence electrons are always located in the outer most energy level.

Explanation:

Valence electrons are the ones that are involved in chemical bonds. In order to take part in a chemical bonding, the outermost/valence electron needs to be involved. Thus, the answer is Valence electrons are always located in the outer most energy level.

What effect does atmospheric pressure have on density?

Answers

Answer:sometimes it commits to how it will happen

Explanation:

Answer:

Atmospheric pressure increases density

Explanation:

Atmospheric pressure decreases the volume of space, since volume is inversely proportional to density, density will increase.

what is the current definition of intelligence?

Answers

Answer:

the ability to learn, emotional knowledge, creativity, and adaptation to meet the demands of the environment effectively

Numerical Problems
A bus covers a distance of 600 metres in 30 seconds. Calculate the speed of
the bus.​

Answers

Answer:

20 m/s.

Explanation:

From the question given above, the following data were obtained:

Distance travelled = 600 m

Time taken = 30 s

Speed =?

Speed can be defined as the distance travelled per unit time. Mathematically, it is expressed as:

Speed = Distance /time

With the above formula, we can easily calculate the speed of the bus as follow:

Distance travelled = 600 m

Time taken = 30 s

Speed =?

Speed = Distance /time

Speed = 600 / 30

Speed = 20 m/s

Therefore, the speed of the bus is 20 m/s.

a book falls off a 1-meter tall table. how long will it take for the book to hit the floor ?

Answers

Answer:

0.45 s

Explanation:

Step 1: Given and required data

Displacement of the book (s): 1 mInitial velocity of the book (u): 0 m/s (rest)Acceleration due to the gravitational force of Earth (a): 9.8 m/s²

Step 2: Calculate the time that it will take for the book to hit the floor (t)

The book undergoes a Uniformly Accelerated Motion. We can calculate the time required to reach the floor using the following suvat equation.

s = u × t + 1/2 × a × t²

s = 0 m/s × t + 1/2 × a × t²

s = 1/2 × a × t²

t = √(2s/a)

t = √(2 × 1 m/9.8 m/s²)

t = 0.45 s

Use the following information to answer questions 4 and 5:
A rock is launched vertically into the air at a velocity of 14.75 m/s.
4. Toby claims that the rock must come to rest before it can fall back towards the ground. Is Toby
correct?
A. Toby is correct because the rock is experiencing a negative acceleration, causing its negative
velocity to increase until the rock reaches a velocity of O m/s before becoming positive.
B. Toby is correct because the rock is experiencing a negative acceleration, causing its positive
velocity to decrease until the rock reaches a velocity of O m/s before becoming negative.
C. Toby is incorrect because the rock is experiencing a positive acceleration, causing its positive
velocity to increase in magnitude.
D. Toby is incorrect because the rock is experiencing a negative acceleration, causing its positive
velocity to increase in magnitude.
5. Calculate the time it takes for the rock to reach its maximum height.
A. 1.50 seconds
B. 2.47 seconds
C. 3.00 seconds
D. 4.94 seconds

Answers

Question 4

B. Toby is correct because the rock is experiencing a negative acceleration, causing its positive velocity to decrease until the rock reaches a velocity of O m/s before becoming negative.

Question 5

At the maximum height, velocity is 0, so:

v = v₀ - gt

0 = 14.75 - 9.8t

t = 14.75/9.8

t = 1.5 s    (OPTION A)

4). In the given situation, the assertion that could be made regarding Toby would be:

B). Toby is correct because the rock is experiencing a negative acceleration, causing its positive velocity to decrease until the rock reaches a velocity of O m/s before becoming negative.

5). The time that would be taken by the rock to attain its greatest height would be:

1.5 second

4). Tobby correctly states as rock would be undergoing a -ve acceleration which leads its +ve velocity to fall by the time rock attains the velocity of 0 m/s.

Thus, option B is the correct answer.

5). Given that,

Initial velocity([tex]v_{0}[/tex]) = 14.75 m/s

As we know,

Velocity remains 0 m/s at the greatest height,

So,

Velocity(v) [tex]= v_{0} - gt[/tex]

where

[tex]0 = 14.75 - 9.8t[/tex]

[tex]t = 14.75/9.8[/tex]

 ∵ [tex]t = 1.5 s[/tex]

Learn more about "Velocity" here:

brainly.com/question/18084516

A little girl is walking, swinging her arms through a 20° angle every 0.25 s. The length of each arm is 30 cm. Assuming that the arms move with constant speed during each swing, find the force that the blood vessel in her arm would exert on a 1-gram drop of blood from the end of the arm if her arm were not swinging.

Answers

Answer:

The force will be "[tex]9.8\times 10^{-3} \ N[/tex]".

Explanation:

The given values are:

Mass,

m = 1 gram

Angle,

Ф = 20°

As we know,

⇒ [tex]F=mg[/tex]

On substituting the given values in the above expression, we get

⇒     [tex]=(1.0\times 10^{-3})(9.8)[/tex]

⇒     [tex]=9.8\times 10^{-3} \ N[/tex]

A solid ball is rolling along a horizontal surface at 3.7 m/s when it encounters an upward
incline. If it rolls without slipping up the incline, what maximum height will it reach?

Answers

Answer:

h = 0.697 [m]  

Explanation:

To solve this problem we must use the energy conservation theorem, where it tells us that kinetic energy is converted to potential energy or vice versa.

[tex]E_{kinet}=E_{pot}[/tex]

where:

Ekinet = kinetic energy [J]

Epot = potential energy [J]

[tex]\frac{1}{2}*m*v^{2}=m*g*h\\0.5*(3.7)^{2} =9.81*h\\h =(6.845)/9.81\\h = 0.697 [m][/tex]

In the formulas for latent heat of fusion and latent heat of vaporization, what does Q represent?

Answers

Answer:

Q is the amount of energy released or absorbed during the change of phase of the substance (in kJ or in BTU), m is the mass of the substance (in kg or in lb), and. L is the specific latent heat for a particular substance (kJ kg−1 or in BTU lb−1), either Lf for fusion, or Lv for vaporization.

I hope this helps∪ω∪

Answer:

A

Explanation:

Assume that, when we walk, in addition to a fluctuating vertical force, we exert a periodic lateral force of amplitude 25 NN at a frequency of about 1 HzHz. Given that the mass of the bridge is about 2000 kgkg per linear meter, how many people were walking along the 144-mm-long central span of the bridge at one time, when an oscillation amplitude of 75 mmmm was observed in that section of the bridge

Answers

Complete Question

The complete question is shown on the first uploaded image

Answer:

Explanation:

From the question we are told

   The amplitude of the lateral  force is  [tex]F = 25 \ N[/tex]

   The frequency is   [tex]f = 1 \ Hz[/tex]

   The mass of the bridge per unit length is  [tex]\mu = 2000 \ kg /m[/tex]

    The length of the central span is  [tex]d = 144 m[/tex]

     The oscillation amplitude of the section  considered at the time considered is  [tex]A = 75 \ mm = 0.075 \ m[/tex]

      The time taken for the undriven oscillation to decay to [tex]\frac{1}{e}[/tex]  of its original value is  t = 6T

Generally the mass of the section considered is mathematically represented as

            [tex]m = \mu * d[/tex]

=>        [tex]m = 2000 * 144[/tex]

=>        [tex]m = 288000 \ kg[/tex]

Generally the oscillation amplitude of the section after a  time period  t is mathematically represented as

                 [tex]A(t) = A_o e^{-\frac{bt}{2m} }[/tex]

Here b is the damping constant and the [tex]A_o[/tex] is the amplitude of the section when it was undriven

So from the question  

               [tex]\frac{A_o}{e} = A_o e^{-\frac{b6T}{2m} }[/tex]

=>            [tex]\frac{1}{e} =e^{-\frac{b6T}{2m} }[/tex]

=>          [tex]e^{-1} =e^{-\frac{b6T}{2m} }[/tex]

=>           [tex]-\frac{3T b}{m} = -1[/tex]

=>         [tex]b = \frac{m}{3T}[/tex]

Generally the amplitude of the section considered is mathematically represented as

           [tex]A = \frac{n * F }{ b * 2 \pi }[/tex]

=>       [tex]A = \frac{n * F }{ \frac{m}{3T} * 2 \pi }[/tex]

=>       [tex]n = A * \frac{m}{3} * \frac{2\pi}{25}[/tex]

=>       [tex]n = 0.075 * \frac{288000}{3} * \frac{2* 3.142 }{25}[/tex]

=>       [tex]n = 1810 \ people[/tex]

What is food called when it enters the pharynx?

A.Bile
B.bolus
C. Food
D. Feces

Answers

Answer:

its food this was easy

A block that slides on a rough surface slows down and eventually stops. The reverse process never occurs. That is, a block at rest never begins to move and accelerate on a rough surface without the action of an external agent. The second situation is forbidden because it would violate:_________.
a) conservation of total energy
b) conservation of momentum
c) the first law of thermodynamics
d) the second law of thermodynamics
e) both the first and second law of thermodynamics
Gracias.

Answers

Answer:

d) the second law of thermodynamics

Explanation:

Here we take an example

The entropy represents a measurement of the energy dispersal in the system. Also, the campfire would an entropy example. The burning of the solid wood and then it became the ash, smoke and gases this all would be spread the energy to the outward as compared to the solid fuel

Therefore as per the given statement, the correct option is d.

If two ___ forces are applied to an object in opposite directions, the object does not move, or moves at a ___ , this means the forces are ___. If to ___ forces are applied to an object in opposite directions, the object does move, this means the forces are ___.

Answers

Answer:

Equal and opposite

Constant speed

Balanced

Unequal and non-opposite

Unbalanced

Explanation:

Balanced forces can be defined as forces which are equal in size but opposite in direction.

Now, these forces do not cause a change in motion because when they act on an object at rest, such an object will not move. For example, when attempt to push against a wall, the wall will push back with an equal but opposite force and neither you nor the wall will move.

While unbalanced forces are those that cause a change in the motion of an object.

Thus, these forces are said not to be equal and opposite.

an unladen swallow flies 5 m/s how far has the bird traveled after 1 minute?

Answers

Answer: 300m

1 minute = 60s

the unladen swallow can fly: 60.5 = 300 (m)

Explanation:

Flying 5 m/s is the same as 300 m/minute. Therefore, it is 300 meters.

two asteroids crashed the crash caused both asteroids to change speeds scientist want to use the change

Answers

Answer:

The force each one experienced

Explanation:

Hope this helps :)

Which has a greater force: a semi-truck at rest or a moving bicycle?

Answers

Although the semi truck certainly has a larger mass, it is not in motion and therefore does not have any momentum. The bicycle however has both mass and velocity and therefore has the larger momentum of the pair.

A moving bicycle bc it’s moving

Look at this model of an atom. Where are the electrons located and how many are there?

Answers

Answer:

The electrons are on the outer shell, there are 10 of them.

Explanation:

There are two in the inner shell and eight in the outer shell, giving us a total of 10 electrons

what type of friction present when you wrench on a car?

Answers

Answer:Rolling friction is friction that acts on objects when they are rolling over a surface. Rolling friction is much weaker than sliding friction or static friction. This explains why most forms of ground transportation use wheels, including bicycles, cars, 4-wheelers, roller skates, scooters, and skateboards.

Explanation:

give 2 reasons why a person should move away from "isolating muscles"

Answers

Answer:

1) - They should move away because its cold

2) - You can get hypothermia......

Explanation:

An object whose specific gravity is 0.850 is placed in water. What fraction of the object is below the surface of the water?

Answers

Answer:

The fraction of the object that is below the surface of the water is ¹⁷/₂₀

Explanation:

Given;

specific gravity of the object, γ = 0.850

Specific gravity is given as;

[tex]specific \ gravity = \frac{density \ of the \ object}{density \ of \ water}\\\\0.85= \frac{density \ of the \ object}{1000 \ kg/m^3} \\\\density \ of the \ object = 850 \ kg/m^3[/tex]

Fraction of the object's weight below the surface of water is calculated as;

[tex]= \frac{850}{1000} \ \times\ 100\%\\\\= 85 \% \\\\= \frac{17}{20}[/tex]

Therefore, the fraction of the object that is below the surface of the water is ¹⁷/₂₀

Which statement accurately describes thermal energy?


Answers

Answer:

here are the options.

Answer:

the energy that is associated with temperature or D

Explanation:

Hope this helps

Mark all the units for speed

Answers

Answer:

Speed. I am speed.

Explanation:

The FitnessGram Pacer Test is a multistage aerobic capacity test that progressively gets more difficult as it continues. The 20 meter pacer test will begin in 30 seconds. Line up at the start. The running speed starts slowly, but gets faster each minute after you hear this signal. A single lap should be completed each time you hear this sound. Remember to run in a straight line, and run as long as possible.

A spring with a mass attached to it is stretched from the rest position of 20 cm to the position of 87 cm. If the spring constant of this spring is 1729 N/m, what is the potential energy stored in this spring?

561.29 J
120.97 J
388.07 J
254.79 J

Answers

Answer:

388.07 J

Explanation:

Answer:

C) 388.07

Explanation:

It is a spring therefore, there must be Elastic potential energy. Now what is the formula for elastic potential energy? It is 1/2 *k *x^2

K=spring constant

x= displacement  

1/2=.5 (hate fractions)

Now, Displacement simply means (how much was it moved?) So, that means subtract.

87-20= 67   x=67

Next, do x^2 (so you don't make a mistake by squaring everything :)  )

67*67=4,489

NOW, do....

.5*1729*4,489=3,880,740.5

Now convert to Joules, I just did 3,880,740.5  / 10^3 = 3880.745

round to 3880.7 J  

                                                                ~There you go loves !

A person pushing a bin with 45 N of force slides the 3 kg plastic bin on a rough surface with friction. The plastic bin is moving with a constant velocity. What is the net force acting on the box?

Answers

Answer:

F = 0

Explanation:

Given that,

Force acting to push a bin = 45 N

Mass of the plastic bin, m = 3 kg

The plastic bin is moving with a constant velocity.

We need to find the net force acting on the box. Constant velocity means the change in velocity is equal to 0. It means acceleration will be 0.

As a result, the force acting on the box is equal to 0.

a steel girder weighting 700 lb is hoisted from gund level to the roof of a 70-ft building using a chain that weighs 4lb/running foot. Find the work done

Answers

Answer:

66.475kJ

Explanation:

Work done is the product of the force and perpendicular distance in direction of the force.

Work done = Force × distance

Given

Weight = 700lb

Distance = 70ft

1lb force = 4.448N

700lb force = 700(4.448) = 3113.6N

Distance = 70(0.305) = 21.35m

Work done = 3113.6×21.35

Work done ≈ 66,475Joules

Work done = 66.475kJ

giving brainiest to correct answer.
Imagine a 0.2 kg ball moving at 5 m/s colliding with a 0.3 kg ball moving at 2 m/s in the same direction. After the collision the 0.2 kg green ball stops moving and the 0.3 kg purple ball continues moving in the same direction.
giving brainiest to correct answer.

Answers

Answer:

[tex]5.33\ m/s[/tex]

Explanation:

[tex]We\ know\ that,\\Momentum=Mass*Velocity\\p=mv\\Hence,\\Lets\ first\ consider\ the\ case\ of\ the\ two\ balls\ 'Before\ Collision':\\\\Mass\ of\ the\ green\ ball=0.2\ kg\\Initial\ Velocity\ of\ the\ green\ ball=5\ m/s\\Initial\ Momentum\ of\ the\ green\ ball=5*0.2=1\ kg\ m/s\\\\Mass\ of\ the\ pink\ ball=0.3\ kg\\Initial\ Velocity\ of\ the\ pink\ ball=2\ m/s\\Initial\ Momentum\ of\ the\ pink\ ball=0.3*2=0.6\ kg\ m/s\\\\Total\ momentum\ of\ both\ the\ balls\ 'Before\ Collision'=1+0.6=1.6\ kg\ m/s[/tex]

[tex]Hence,\\Lets\ now\ consider\ the\ case\ of\ the\ two\ balls\ 'After\ Collision':\\\\Mass\ of\ the\ green\ ball=0.2\ kg\\Final\ Velocity\ of\ the\ green\ ball=0\ m/s\\Final\ Momentum\ of\ the\ green\ ball=0\ kg\ m/s\\\\Mass\ of\ the\ pink\ ball=0.3\ kg\\Final\ Velocity\ of\ the\ pink\ ball=v\ m/s\\Final\ Momentum\ of\ the\ pink\ ball=0.3*v=0.3v\ kg\ m/s\\\\Total\ momentum\ of\ both\ the\ balls\ 'After\ Collision'=0+0.3v=0.3v\ kg\ m/s[/tex]

[tex]As\ we\ know\ that,\\Through\ the\ law\ of\ conservation\ of\ momentum,\\In\ an\ isolated\ system:\\Total\ Momentum\ Before\ Collision=Total\ Momentum\ After\ Collision\\Hence,\\1.6=0.3v\\v=\frac{1.6}{0.3}=5.33\ m/s[/tex]

HELP ASAP!! i’ll mark you the brainliest!!

Answers

Answer:

yes

Explanation:

CUP 6. A wire has a diameter of 0.032 inches. The AWG rating of this wire is most likely to be O A. 20 O B. 14. O C. 12. O D. 18.​

Answers

Answer:

A. 20

Explanation:

The AWG rating of the wire can be determined by applying the formula;

[tex]d_{i}[/tex] = 0.005 x [tex]92^{\frac{(36 - s)}{39}} }[/tex]

where [tex]d_{i}[/tex] is the diameter of wire in inches, and s is the diameter of wire in AWG.

Given that [tex]d_{i}[/tex] = 0.032 inches, then;

0.032 = 0.005 x [tex]92^{\frac{(36 - s)}{39}} }[/tex]

[tex]\frac{0.032}{0.005}[/tex] =  [tex]92^{\frac{(36 - s)}{39}} }[/tex]

6.4 = [tex]92^{\frac{(36 - s)}{39}} }[/tex]

Find the log of both sides to have,

log 6.4 = log [tex]92^{\frac{(36 - s)}{39}} }[/tex]

log 6.4 = [tex](\frac{36 -s}{39})[/tex] log 92

[tex]\frac{log 6.4}{log92}[/tex] = [tex](\frac{36 -s}{39})[/tex]

0.410523 = [tex](\frac{36 -s}{39})[/tex]

36 - s = 0.410523 x 39

         = 16.0104

⇒ s = 36 - 16.0104

      = 19.9896

s = 20

Therefore, the AWG of the wire is 20.

Just do the attachment

Answers

Answer: your answer is B I know that's what you picked but I believe it is correct! look below...

Explanation: A solution is made when one substance called the solute "dissolves" into another substance called the solvent. Dissolving is when the solute breaks up from a larger crystal of molecules into much smaller groups or individual molecules.

In order to form a solution, the solute must be surrounded, or solvated, by the solvent. Solutes successfully dissolve into solvents when solute-solvent bonds are stronger than either solute-solute bonds or solvent-solvent bonds.

BRAINLIEST?

The answer to that question is B.
Other Questions
Share a film, television show, or piece of art or music that has had a significant impact on your life. How did it challenge your view of the world Which expression is equivalent to 1/3(9x + 12) + 4x + 6?A: 7x + 18B7x + 10C:13x x +6D:13x + 18 I didnt understand how to solve this, id be happy if someone explained thank you A frame designer is making a triangular frame. She has two sidesof length 18 inches and 27 inches. What are the possible lengths(in whole inches) for the third side?Group of answer choicesx 459 < x < 45Not Possible Why was the Second Amendment so important? Which of the following is the best example of clear and concise writing for a rsum?a.explored every avenueb.last but not leastc.at this point in timed.finallyPlease select the best answer from the choices providedABCD Glenbrook Hospital finds that wrist pain is common among its lab workers. The hospital determines that the lab workersuse repetitive hand motions in sorting and storing test tubes. Glenbrook's next step should be toO compile a list of injured employee's names,O provide lab workers with pain medication,identify more hazards in the laboratory,devise a strategy to reduce the risk of wrist injury. Help me, please Thanks Which lines are parrallel check all that apply The shown quadrilateral is a rectangle. If AB is 10 what is the length of DC?_____________________A. 10B.5C.15D.12 If an idea is restated in a nonfiction article, what does this most likely signal for the reader? what is wrong with this picture????? Is y = 9x + 1/2 proportional? 3What is the decimal equivalent of 3/9? (5 points)0.20.3.40.5 Choose the best statement that explains the graph represented by these ordered pairs.These ordered pairs do NOT represent a straight line.These ordered pairs do NOT represent a straight line.These ordered pairs represent a straight line. Shelby loves to knit scarves. Normally, it takes her 15 minutes to knit 5 inches of a scarf. She plans to make a scarf that is 30 inches long.If she knits at the same rate, how many minutes will it take Shelby to knit the scarf? PLS HELP I HAVE ZERO CLUE AND NEED HELP ASAP DUE AT 12 WILL GOVE BRAINLIEST THANK U1/4th of a sample of thorium-232 remains.How long has the sample been decaying? which example is a weak base? ethyl alcohol, ammonia, potassium hydroxide or vinegar? 7 7/10 + 6 2/3 help please please if you don't know don't answer