The ∆H° for the reaction [tex]1/2 Mg_3N_2(s) + 3H_2O(l)[/tex]→[tex]1/2 Mg(OH)_2 (s) + NH_3(g)[/tex] is approximately -1372.54 kJ/mol
To calculate the ∆H° for the reaction[tex]1/2 Mg_3N_2(s) + 3H_2O(l)[/tex] → [tex]1/2 Mg(OH)_2 (s) + NH_3(g)[/tex], we need to use the given information that 3.4 kJ of energy are released when excess water is added to 0.50 g of Mg3N2(s).
First, let's calculate the moles of [tex]Mg_3N_2[/tex](s):
Molar mass of [tex]Mg_3N_2[/tex] = 3 * molar mass of Mg + 2 * molar mass of N
Molar mass of [tex]Mg_3N_2[/tex] = 3 * 24.31 g/mol + 2 * 14.01 g/mol = 100.95 g/mol
Moles of [tex]Mg_3N_2[/tex](s) = Mass / Molar mass
Moles of [tex]Mg_3N_2[/tex](s) = 0.50 g / 100.95 g/mol = 0.004955 mol
Next, we can determine the ∆H° per mole of [tex]Mg_3N_2[/tex](s):
∆H° per mole = Energy released / Moles of [tex]Mg_3N_2[/tex](s)
∆H° per mole = -3.4 kJ / 0.004955 mol = -686.27 kJ/mol
Since the balanced equation shows that only half a mole of [tex]Mg_3N_2[/tex](s) is involved, we multiply the ∆H° per mole by 2:
∆H° = 2 * ∆H° per mole
∆H° = 2 * (-686.27 kJ/mol) = -1372.54 kJ/mol
Therefore, the ∆H° for the reaction [tex]1/2 Mg_3N_2(s) + 3H_2O(l)[/tex]→[tex]1/2 Mg(OH)_2 (s) + NH_3(g)[/tex] is approximately -1372.54 kJ/mol.
Learn more about Molar mass here:
https://brainly.com/question/31545539
#SPJ11
Explain what happens using chemical equation when a piece of magnesium ribbon is dropped into dilute HCl
The reaction between magnesium ribbon and dilute hydrochloric acid results in the formation of magnesium chloride and the release of hydrogen gas.
When a piece of magnesium ribbon is dropped into dilute hydrochloric acid (HCl), a chemical reaction occurs, resulting in the formation of magnesium chloride (MgCl2) and the release of hydrogen gas (H2). This reaction can be represented by the following balanced chemical equation:
Mg + 2HCl → MgCl2 + H2
In this reaction, the magnesium (Mg) reacts with the hydrochloric acid (HCl). The magnesium atoms lose two electrons to form Mg2+ ions, while the hydrogen ions (H+) from the hydrochloric acid gain these electrons to form hydrogen gas molecules (H2). The chlorine ions (Cl-) from the hydrochloric acid combine with the magnesium ions to form magnesium chloride.
The reaction is exothermic, meaning it releases heat energy. As the magnesium ribbon reacts with the hydrochloric acid, you may observe effervescence, as bubbles of hydrogen gas are released. The solution may also become warmer due to the exothermic nature of the reaction.
For more such questions on magnesium ribbon visit:
https://brainly.com/question/23259866
#SPJ8
Which of the following metals will dissolve in nitric acid but not hydrochloric?
a. Fe
b. Pb
c. Cu
d. Sn
e. Ni
Among the given metals, copper (Cu) is the one that will dissolve in nitric acid but not in hydrochloric acid.
Option (c) is correct
Nitric acid is a strong oxidizing acid that can dissolve a variety of metals, including copper. When copper reacts with nitric acid, it undergoes oxidation, and copper(II) ions ( are formed.
However, hydrochloric acid (HCl) is not a strong oxidizing agent, and it primarily acts as a proton donor (acid) in aqueous solutions. Copper does not readily react with hydrochloric acid to form soluble copper compounds. Instead, it may undergo a slow reaction with chloride ions present in hydrochloric acid to form insoluble copper chloride compounds.
To summarize, among the given metals, copper (Cu) will dissolve in nitric acid but not in hydrochloric acid (HCl).
Therefore, the correct answer will be option (c)
To know more about metals
https://brainly.com/question/29404080
#SPJ4
combine the cations listed in the left column with the corresponding anions listed on the top row to make a neutral compound in the box where the two meet.
In order to combine the cations listed in the left column with the corresponding anions listed on the top row to make a neutral compound in the box where the two meet, we need to cross-multiply the charges of the cation and anion so that the total charge equals zero.
This is because in order for a compound to be neutral, it must have a total charge of zero.
For example, if we have sodium cation and chloride anion, we can cross-multiply their charges so that the total charge is zero. Na+ has a charge of +1 and Cl- has a charge of -1, so we can combine them to form NaCl, which is a neutral compound with a total charge of zero.
Similarly, we can combine other cations and anions in the same way to form neutral compounds. For instance, we can combine (magnesium cation) and (sulfate anion) to form MgSO₄, which is a neutral compound with a total charge of zero.
Overall, to form a neutral compound from cations and anions, we need to cross-multiply their charges so that the total charge equals zero. We can then write the resulting compound in the box where the two meet.
To know more about neutral compound click on below link:
https://brainly.com/question/30308505#
#SPJ11
The Lewis structure below represents the valence electron configuration of an element. What is the electron configuration of this element? Check all possible answers. :X a) 1522s22p63523p6306452. b) 1822s22p63s23p4. c) 1s22s22p6. d) 1s22s22p4.
Electrons.The electron configuration of this element is 1s² 2s² 2p². Thus, option D, 1s²2s²2p⁴ is correct.
The Lewis structure represents the valence electron configuration of an element. The electron configuration of the given element can be determined from the Lewis structure.The given Lewis structure indicates that the element has four valence electrons. Therefore, the electron configuration of the given element will end with 4s2 or 4p4 because both of these orbitals have a total of 4 valence electrons.The possible electron configurations for the given element are as follows:1s22s22p63s23p4or1s22s22p63s23p6or1s22s22p63s23p44s2Therefore, the correct option is d) 1s22s22p4. It is the electron configuration for the given element that has four valence electrons.The electron configuration of this element is 1s² 2s² 2p². Thus, option D, 1s²2s²2p⁴ is correct.
Learn more about the Lewis structure here,
https://brainly.com/question/30029310
#SPJ11
Draw the Lewis structure for SO₂ (by following the octet rule on all atoms) and then determine the number of nonbonding electron pairs on the central atom.
To draw the Lewis structure for SO₂ (sulfur dioxide) and determine the number of nonbonding electron pairs on the central atom, we follow the octet rule and consider the valence electrons.
Sulfur (S) has six valence electrons, and oxygen (O) has six valence electrons each. Therefore, the total number of valence electrons for SO₂ is:
Sulfur: 6 valence electrons
Oxygen 1: 6 valence electrons
Oxygen 2: 6 valence electrons
Total: 6 + 6 + 6 = 18 valence electrons
We start by placing the atoms together, with the sulfur in the center, and drawing single bonds between sulfur and each oxygen atom. This uses 4 electrons (2 from each bond), leaving us with 14 valence electrons.Next, we place the remaining electrons around the atoms to satisfy the octet rule. We distribute the remaining 14 electrons as lone pairs on each oxygen atom (6 electrons on each) and the remaining 2 electrons as a lone pair on sulfur.After drawing the Lewis structure, we find that sulfur (central atom) has one nonbonding electron pair. These nonbonding electron pairs are often referred to as lone pairs.Learn more about lewis structure here : brainly.com/question/29603042
#SPJ11
acrylonitrile, c3h3n, has the lewis structure shown in the figure. the molecule has ______ σ bonds and ______ π bonds.
The total number of σ bonds is 6 and the total number of π bonds is 2.
Acrylonitrile, C3H3N, has the Lewis structure shown in the figure. The molecule has 6 σ bonds and 2 π bonds.How is the Lewis structure of acrylonitrile drawn?The Lewis structure for acrylonitrile is shown below:A molecule with one triple bond (which contains one sigma bond and two pi bonds) and three single bonds (which contain sigma bonds) is acrylonitrile. The molecular geometry of acrylonitrile is linear with a bond angle of 180 degrees since the carbon atoms at either end are both sp hybridized. Nitrogen has one lone pair, while the carbon atoms are joined by a triple bond, and all atoms are in the same plane. There are 3 σ bonds (single bonds between N and C) and 3 σ bonds (1 in each of the C-C bonds and 1 in the C=N bond).Thus, the total number of σ bonds is 6 and the total number of π bonds is 2.
Learn more about C3H3N here,
https://brainly.com/question/31664279
#SPJ11
How many grams of CaO(s) must react with an excess of water to liberate the same quantity of heat as does the combustion of 24.4 L of CH4 (g) in excess O2 measured at 24.7°C and 753 Torr?
We need to calculate the heat released from the combustion of CH4 and then use the stoichiometry of the reaction between CaO and water to find the mass of CaO required.
To solve the problem, we follow these steps:
Calculate the heat released from the combustion of CH4:
Convert the given volume of CH4 (24.4 L) to moles using the ideal gas law.
Use the balanced equation for the combustion of CH4 to determine the moles of CH4 consumed.
Calculate the heat released using the standard enthalpy of combustion for CH4.
Use stoichiometry to find the mass of CaO needed:
Determine the balanced equation for the reaction between CaO and water.
Use the stoichiometric coefficients to relate the moles of CH4 consumed to the moles of CaO needed.
Convert the moles of CaO to grams.
By following these steps and performing the necessary calculations, you can find the mass of CaO required to liberate the same quantity of heat as the combustion of 24.4 L of CH4.
Learn more about combustion, below:
https://brainly.com/question/31123826
#SPJ11
9. A student was provided with only a thermometer, a stopwatch and a beaker. What could the student measure? A 10.5g solid and 24.8 cm³ liquid B 10.5g solid and 25°C C D 24.8 cm³ liquid and 45 seconds 25°℃ and 45 seconds
The student can measure 10.5g solid and 25°C using the given equipment (thermometer, stopwatch, and beaker). Option B.
Based on the given equipment (thermometer, stopwatch, and beaker), let's examine the options to determine what the student can measure:
A. 10.5g solid and 24.8 cm³ liquid: The student cannot directly measure the mass of a solid using a thermometer, stopwatch, and beaker. Measuring the volume of a liquid would require a graduated cylinder or a measuring pipette, which is not mentioned in the given equipment. Therefore, this option is not feasible.
B. 10.5g solid and 25°C: The student can measure the temperature of an object using the thermometer, and it is possible to measure the mass of a solid by weighing it. Therefore, this option is valid. The student can weigh the solid using the balance and measure the temperature of an object using the thermometer.
C. 24.8 cm³ liquid and 45 seconds: The student can measure the volume of a liquid using the beaker. However, the stopwatch is not suitable for measuring volume or time intervals in seconds. It is specifically used for measuring time. Therefore, this option is not valid.
D. 25°C and 45 seconds: The student can measure the temperature using the thermometer. Additionally, the stopwatch can accurately measure a time interval of 45 seconds. Therefore, this option is valid. Option B is correct.
For more such question on thermometer. visit :
https://brainly.com/question/2339046
#SPJ8
A buffer contains 0.15 mol of propionic acid (C2H5COOH) and 0.10 mol of sodium propionate (C2H5COONa) in 1.20 L. a) What is the pH of this buffer? b) What is the pH of the buffer after the addition of 0.01 mol of NaOH? c) What is the pH of the buffer after the addition of 0.01 mol of HI?
a) The initial pH of the buffer is approximately 4.76.
b) The pH of the buffer after the addition of 0.01 mol of NaOH is approximately 4.74.
c) The pH of the buffer after the addition of 0.01 mol of HI is approximately 4.61.
To solve these questions, we need to consider the acid-base reactions of propionic acid (C₂H₅COOH) and sodium propionate (C₂H₅COONa) with the added substances. Let's break down each part:
a) To find the initial pH of the buffer, we need to determine the pH based on the acid dissociation of propionic acid. Propionic acid is a weak acid, so we can use the Henderson-Hasselbalch equation:
pH = pKa + log([A⁻]/[HA])
Where pKa is the negative logarithm of the acid dissociation constant (Kₐ), [A⁻] is the concentration of the conjugate base (C₂H₅COO⁻) (in this case, from sodium propionate), and [HA] is the concentration of the weak acid (C₂H₅COOH).
First, we need to find the pKa of propionic acid. The pKa can vary depending on the source, but a commonly used value is approximately 4.87 for propionic acid.
Using the given concentrations:
[A⁻] = 0.10 mol / 1.20 L = 0.0833 M
[HA] = 0.15 mol / 1.20 L = 0.125 M
pH = 4.87 + log(0.0833/0.125)
pH ≈ 4.76
Therefore, the initial pH of the buffer is approximately 4.76.
b) After the addition of 0.01 mol of NaOH, we need to consider the reaction between NaOH and the weak acid (propionic acid). The NaOH will react with propionic acid to form sodium propionate (C₂H₅COONa) and water (H₂O). Since the concentration of propionic acid (weak acid) decreases, the pH will increase.
The reaction equation is:
C₂H₅COOH + NaOH → C₂H₅COONa + H₂O
The balanced equation shows a 1:1 stoichiometric ratio between C₂H₅COOH and NaOH. Since we added 0.01 mol of NaOH, the same amount of propionic acid will react, resulting in a decrease of 0.01 mol of C₂H₅COOH.
To calculate the new concentration of C₂H₅COOH:
[HA] = (0.15 mol - 0.01 mol) / 1.20 L ≈ 0.1167 M
Now we can calculate the new pH using the Henderson-Hasselbalch equation as we did in part a):
pH = 4.87 + log(0.0833/0.1167)
pH ≈ 4.74
Therefore, the pH of the buffer after the addition of 0.01 mol of NaOH is approximately 4.74.
c) After the addition of 0.01 mol of HI, we need to consider the reaction between HI and the conjugate base (C₂H₅COO⁻) (from sodium propionate). The HI will react with C₂H₅COO⁻ to form propionic acid (C₂H₅COOH) and water (H₂O). Since the concentration of the conjugate base (C₂H₅COO⁻) decreases, the pH will decrease.
The reaction equation is:
C₂H₅COO⁻ + HI → C₂H₅COOH + I⁻
The balanced equation shows a 1:1 stoichiometric ratio between C₂H₅COO⁻ and HI. Since we added 0.01 mol of HI, the same amount of C₂H₅COO⁻ will react, resulting in a decrease of 0.01 mol of C₂H₅COO⁻.
To calculate the new concentration of C₂H₅COO⁻:
[A⁻] = (0.10 mol - 0.01 mol) / 1.20 L ≈ 0.075 M
Now we can calculate the new pH using the Henderson-Hasselbalch equation:
pH = 4.87 + log(0.075/0.1167)
pH ≈ 4.61
Therefore, the pH of the buffer after the addition of 0.01 mol of HI is approximately 4.61.
Learn more about Buffer solution from the link given below.
https://brainly.com/question/31428923
#SPJ4
Ammonium nitrate dissolves spontaneously and endothermicaly in water at room temperature. What can be deduced about the sign of AS for this solution process? A) ΔS=0 B) ΔS <0 C) ΔS > 0
The deduced sign of ΔS for the dissolution of ammonium nitrate in water is C) ΔS > 0, indicating an increase in entropy.
The fact that ammonium nitrate dissolves spontaneously and endothermically in water at room temperature provides information about the sign of the entropy change (ΔS) for this solution process.
When a substance dissolves spontaneously, it typically indicates an increase in disorder or randomness, which corresponds to a positive entropy change (ΔS > 0).
This is because the dissolved particles become more dispersed throughout the solvent, leading to a greater number of microstates and increased randomness.
Furthermore, since the dissolution of ammonium nitrate is endothermic (absorbs heat), it suggests that the increased disorder outweighs the decrease in energy, reinforcing the idea of a positive entropy change.
Learn more about entropy here:
brainly.com/question/31066828
#SPJ4
Choose the compound below that should have the highest melting point according to the ionic bonding model.
A) AlN
B) MgO
C) NaCl
D) CaS
E) RbI
According to the ionic bonding model, the compound with the highest melting point is likely to be the one with the strongest ionic bonds.
In the ionic bonding model, compounds form when there is a transfer of electrons from one element to another, resulting in the formation of positive and negative ions. The strength of the ionic bond is influenced by factors such as the charges and sizes of the ions involved.
Among the given compounds, MgO (magnesium oxide) is expected to have the highest melting point. This is because magnesium (Mg) is a metal that tends to lose two electrons and form a 2+ cation, while oxygen (O) is a nonmetal that tends to gain two electrons and form a 2- anion. The resulting Mg2+ and O2- ions have strong electrostatic attraction due to the opposite charges. This strong ionic bond requires a significant amount of energy to break, leading to a high melting point for MgO.
On the other hand, compounds like AlN (aluminum nitride), NaCl (sodium chloride), CaS (calcium sulfide), and RbI (rubidium iodide) also exhibit ionic bonding but with different ion sizes and charges. While these compounds have varying degrees of ionic bonding strength, they are expected to have lower melting points compared to MgO.
In conclusion, based on the ionic bonding model, MgO (option B) is likely to have the highest melting point among the given compounds due to its strong ionic bond resulting from the combination of a 2+ metal cation and a 2- nonmetal anion.
To learn more about compound -brainly.com/question/14186298
#SPJ11
Determine the electron geometry (eg) and molecular geometry (mg) of SiF4.
A) eg=tetrahedral, mg=trigonal pyramidal
B) eg=octahedral, mg=square planar
C) eg=trigonal bipyramidal, mg=trigonal pyramidal
D) eg=tetrahedral, mg=bent
E) eg=tetrahedral, mg=tetrahedral
D) The electron geometry (eg) of SiF₄ is tetrahedral, and the molecular geometry (mg) is bent.
In SiF₄, silicon (Si) is the central atom bonded to four fluorine (F) atoms. To determine the electron geometry, we consider both the bonding and non-bonding electron pairs around the central atom. SiF4 has four bonding pairs of electrons and no lone pairs on the central atom. This arrangement gives a tetrahedral electron geometry.
However, when we consider the positions of the atoms only, without taking into account the lone pairs, we find that SiF₄ has a bent molecular geometry. The fluorine atoms are arranged in a V-shape, with the silicon atom at the center and the fluorine atoms slightly bent away from the central atom due to the repulsion between the bonding pairs.
Therefore, the correct answer is D) eg=tetrahedral, mg=bent. The tetrahedral electron geometry arises from the arrangement of bonding and non-bonding pairs around the central atom, while the bent molecular geometry results from the actual positions of the atoms in the molecule.
To learn more about molecular geometry, here
https://brainly.com/question/31993718
#SPJ4
Which element is oxidized in the reaction below? Fe^2+ + H+ Cr2O7^2- -----> Fe^3+ + Cr^3+ + H2O O H
O Cr
O Fe
O O
The element that is oxidized in the reaction : Fe²+ + H+ Cr2O7²- -----> Fe³+ + Cr³+ + H2O O H is Fe.
What is Oxidation?Oxidation is described as a chemical process in which an atom, ion, or molecule loses electrons.
In the scenario above, the [tex]Fe^2^+[/tex]ion is losing an electron and undergoing oxidation.
The [tex]Fe^2^+[/tex] ion is being oxidized to[tex]Fe^3^+[/tex] by transferring one electron to another species in the reaction.
We notice that reaction involves the transfer of electrons from [tex]Fe^2^+[/tex] to Cr2O7² and results in the oxidation of [tex]Fe^2^+[/tex] and reduction of Cr2O7².
Learn more about oxidation at:
https://brainly.com/question/13182308
#SPJ4
amino acids can be synthesized by reductive amination. draw the structure of the organic compound that you would use to synthesize aspartic acid.
One of the two acidic amino acids is aspartic acid. As generic acids in enzyme active sites, aspartic and glutamic acids are crucial for preserving proteins' solubility and ionic nature and aspartic acid.
Thus, The charged amino acids are primarily responsible for the buffering characteristics of proteins, which are important for preserving the body's pH balance in the serum.
A carboxylic acid group is substituted for one of the hydrogens in alanine to create aspartic acid. A polypeptide's aspartic acid's carboxyl group has a pKa of around 4.0.
A pyruvate is the -keto homolog of alanine, so too does aspartic acid have a -keto homolog in oxaloacetate. A straightforward transamination reaction can interconvert aspartic acid and oxaloacetate.
Thus, One of the two acidic amino acids is aspartic acid. As generic acids in enzyme active sites, aspartic and glutamic acids are crucial for preserving proteins' solubility and ionic nature and aspartic acid.
Learn more about aspartic acid, refer to the link:
https://brainly.com/question/9379332
#SPJ4
To make aspartic acid via reductive amination, we must start with an amine and an aldehyde or ketone.
In this case an amine compound, such as ammonia [tex](NH_3)[/tex], and an aldehyde or ketone chemical would be used.
The following describes the structure of an organic chemical that can be used to make aspartic acid via reductive amination.
[tex]H_2N-CO-CH_2-CH_2-COOH[/tex]
2-Aminobutanedioic acid, also known as -aminosuccinic acid, is the name of this substance. Aspartic acid can be made via reductive amination by reducing the chemical's carbonyl group (C=O) using a reducing agent such as sodium borohydride[tex](NaBH_4)[/tex] and reacting it with ammonia.
Learn more about reductive amination, here:
https://brainly.com/question/14207331
#SPJ4
What property is used to calculate the ph of a solution
A. The hydrogen ion concentration in mol/L
B. The hydrogen ion concentration in ppm
C. The hydrogen ion concentration in mg/dL
D. The hydrogen ion concentration in mol/kg
The property that is used to calculate the pH of a solution is (A) the hydrogen ion concentration in mol/L.
pH is a measure of the acidity or basicity of a solution. The pH scale ranges from 0 to 14, with 7 being neutral, values below 7 being acidic, and values above 7 being basic.
To calculate the pH of a solution, you need to know the concentration of hydrogen ions (H+) in mol/L (A).
pH is defined as the negative logarithm (base 10) of the hydrogen ion concentration, so the equation for calculating pH is:
pH = -log[H+]
For example, if the hydrogen ion concentration is 1 x 10^-4 mol/L,
the pH would be:
pH = -log(1 x 10^-4)
pH = 4
Note that pH is typically reported, so in this case, the pH would be reported as 4.0.
To know more about hydrogen ion visit:
https://brainly.com/question/8069088
#SPJ11
Calculate the amount of energy needed to change 441 g of water ice at -10 degree Celsius to steam at 125 degree Celsius. The following constants may be useful:
Cm (ice)=36.57 J/(mol⋅∘C)
Cm (water)=75.40 J/(mol⋅∘C)
Cm (steam)=36.04 J/(mol⋅∘C)
ΔHfus=+6.01 kJ/mol
ΔHvap=+40.67 kJ/mol
Express your answer with the appropriate units.
Therefore, the amount of energy required to change 441 g of water ice at -10 degree Celsius to steam at 125 degree Celsius is 18.1 MJ.
The given problem is about calculating the energy needed to change 441 g of water ice at -10 degree Celsius to steam at 125 degree Celsius. The following constants may be useful:Cm (ice)=36.57 J/(mol⋅∘C)Cm (water)=75.40 J/(mol⋅∘C)Cm (steam)=36.04 J/(mol⋅∘C)ΔHfus=+6.01 kJ/molΔHvap=+40.67 kJ/molThe specific heat capacity of ice: Cm (ice) = 36.57 J/(mol °C).The ice needs to be heated from -10°C to 0°C before it can be melted. The energy required will be:ΔH = Cm (ice) * mass * ΔTΔH = 36.57 * 441 * 10 = 161617.7 JThe energy required to melt ice at 0°C is given by the latent heat of fusion: ΔHfus = 6.01 kJ/mol ΔHfus = 6010 J / molAmount of energy needed to melt 441 g of ice = (ΔHfus / Molar mass) * massAmount of energy needed to melt 441 g of ice = (6010 / 18) * 441 = 1,986,850 JThe energy required to heat the water from 0°C to 100°C will be:ΔH = Cm (water) * mass * ΔTΔH = 75.40 * 441 * 100 = 3,313,440 JThe energy required to boil the water to steam is given by the latent heat of vaporization: ΔHvap = 40.67 kJ/mol ΔHvap = 40,670 J / molAmount of energy needed to boil 441 g of water = (ΔHvap / Molar mass) * massAmount of energy needed to boil 441 g of water = (40670 / 18) * 441 = 10,270,850 JThe energy required to heat the steam from 100°C to 125°C will be:ΔH = Cm (steam) * mass * ΔTΔH = 36.04 * 441 * 25 = 399,366 JTherefore, the total amount of energy needed to change 441 g of water ice at -10°C to steam at 125°C is:ΔHtotal = ΔH1 + ΔH2 + ΔH3 + ΔH4ΔHtotal = 161617.7 + 1986850 + 3313440 + 10270850 + 399366ΔHtotal = 18,081,123.7 J or 18.1 MJ.
To know more about energy visit:
https://brainly.com/question/13777679
#SPJ11
Identify the neutral element represented by this excited‑state electron configuration.
excited state: 1s2 2s2 2p6 3s2 3p1 4s1
Element symbol = ?
Write the full ground‑state electron configuration for that element.
Ground state = ?
The required correct answer is the element represented by this excited state electron configuration is gallium (Ga).Ground-state electron configuration of gallium is: 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p1.
Explanation : Given that the excited state of the electron configuration is 1s2 2s2 2p6 3s2 3p1 4s1. Gallium (Ga) is a chemical element that is classified as a metal with the atomic number 31. It is in Group 13 of the periodic table. It is found in nature in trace amounts and is used in a variety of applications, including the production of semiconductors and LEDs.
Learn more about Gallium Here https://brainly.in/question/38992811
#SPJ11
A solution that contains 100.0 mL of 0.40 M of NH4Cl is O a strong acid O a strong base O a weak acid O a weak base O a buffer
A solution that contains 100.0 mL of 0.40 M of NH₄Cl is a weak acid.
Option (c) is correct.
NH₄Cl is the salt formed from the weak base ammonia (NH₃) and the strong acid hydrochloric acid (HCl). In aqueous solution, NH₄Cl dissociates to release ammonium ions (NH₄+) and chloride ions (Cl-).
The ammonium ion (NH₄+) acts as a weak acid since it can donate a proton (H+) to water, resulting in the formation of hydronium ions (H₃O+). Therefore, the solution containing NH₄Cl can be considered as a weak acid solution due to the presence of the NH₄+ ions.
It is important to note that although NH₄Cl contains the chloride ion (Cl-), which is the conjugate base of the strong acid HCl, the presence of the weak acid NH₄+ dominates the solution's acid-base behavior.
Therefore, the correct option is (c).
To learn more about weak acid here
https://brainly.com/question/13032224
#SPJ4
Complete question is:
A solution that contains 100.0 mL of 0.40 M of NH₄Cl is
a) a strong acid
b) a strong base
c) a weak acid
d) a weak base
e) a buffer
a solution of acetic acid that has a concentration of 0.10 moles per liter has a ph of 2.87. what is the likely ph of a 0.10 mole per liter solution of the conjugate base sodium acetate?
0.10 moles per liter solution of the conjugate base sodium acetate is likely to have a pH greater than 7.
Is the pH of a 0.10 mole per liter solution of the conjugate base sodium acetate likely to be acidic or basic?When acetic acid (CH3COOH) donates a proton, it forms its conjugate base, acetate ion (CH3COO-). In the given scenario, the acetic acid solution has a pH of 2.87, indicating acidity. The lower pH value suggests a higher concentration of H+ ions. As a weak acid, acetic acid partially dissociates, releasing H+ ions and acetate ions. When sodium acetate (CH3COONa) dissolves in water, it completely dissociates into sodium ions (Na+) and acetate ions. The presence of acetate ions (the conjugate base) from sodium acetate will react with the excess H+ ions in the solution, shifting the equilibrium towards the formation of acetic acid and water. This process, called the hydrolysis of salts, will consume the H+ ions, thereby increasing the pH of the solution. Consequently, the 0.10 mole per liter solution of sodium acetate is likely to have a pH greater than 7, making it basic.
Learn more about pH
brainly.com/question/2288405
#SPJ11
an atom of 186ta has a mass of 185.958540 amu. mass of1h atom = 1.007825 amu mass of a neutron = 1.008665 amu calculate the mass defect (deficit) in amu/atom.
If an atom of 186ta has a mass of 185.958540 amu. mass of1h atom = 1.007825 amu mass of a neutron = 1.008665 amu, the mass defect of 186Ta is 2.04146 amu/atom.
The mass defect is the difference between the mass of an atom and the sum of the masses of its constituent particles. To calculate the mass defect, follow these steps:
Determine the number of protons and neutrons in the nucleus.186Ta is the isotope of tantalum with a mass of 185.958540 amu. There are Z protons and N neutrons in the nucleus. Z is the atomic number.186Ta has an atomic number of 73, indicating that it has 73 protons.
Therefore, the number of neutrons in 186Ta is N = A - Z = 186 - 73 = 113. The number of protons is 73, and the number of neutrons is 113.
Calculate the total mass of the nucleus by adding up the masses of the protons and neutrons. The mass of 73 protons is 73 x 1.007825 amu = 73.7 amu.
The mass of 113 neutrons is 113 x 1.008665 amu = 114.3 amu.
The total mass of the nucleus is 73.7 + 114.3 = 188.0 amu.
Calculate the mass defect. The mass of 186Ta is 185.958540 amu. The mass defect is equal to the mass of the nucleus minus the mass of the atom.
Therefore,
mass defect = (mass of nucleus) - (mass of the atom)
= 188.0 - 185.958540
= 2.04146 amu.
The mass defect of 186Ta is 2.04146 amu/atom.
Learn more about mass defects here:
https://brainly.com/question/19828097
#SPJ11
T/F. pipelines move liquid products very efficiently and can even move products like coal.
Pipelines move liquid products very efficiently and can even move products like coal" is False.
The reason for this is that pipelines can only move liquid products, not solid products like coal. This is because pipelines are designed specifically to transport liquids, such as oil and natural gas. They are not capable of transporting solids in any form. The movement of liquid products through pipelines is very efficient, as it allows for a constant and steady flow of product from one location to another. This is particularly important for products like oil and natural gas, which are often produced in remote locations and need to be transported long distances to reach markets or refineries. However, the transportation of solid products like coal is typically done by trucks, trains, or ships. These methods of transportation are better suited to handling solid materials, as they are designed to handle the weight and bulk of these materials. Therefore, the statement "pipelines move liquid products very efficiently and can even move products like coal" is false, as pipelines are not capable of transporting solid products like coal.
learn more about natural gas Refer: https://brainly.com/question/14870839
#SPJ11
True. Pipelines are efficient means of transporting liquid products and can also transport certain solid products like coal. They offer advantages such as high capacity, cost-effectiveness, and reduced environmental impact compared to other modes of transportation.
Pipelines are indeed capable of moving liquid products very efficiently. They are widely used for transporting various liquids, including crude oil, natural gas, petroleum products, water, and chemicals. Pipelines offer several advantages over alternative transportation methods, such as trucks or trains. They have high capacity, enabling large volumes of products to be transported at once. This efficiency reduces transportation costs and minimizes the need for multiple vehicles. Additionally, pipelines have lower fuel consumption and emissions compared to trucks or trains, resulting in reduced environmental impact.
Moreover, pipelines can transport certain solid products like coal using slurry pipelines. In a slurry pipeline, coal is mixed with water or another liquid to form a fluid-like mixture that can be pumped through the pipeline. This method allows for efficient transportation of coal over long distances.
In conclusion, pipelines are highly efficient for transporting liquid products and can even transport certain solid products like coal using slurry pipelines. They offer advantages in terms of capacity, cost-effectiveness, and environmental impact compared to other transportation modes.
learn more about pipelines here; brainly.com/question/19130804
#SPJ11
PLEASE HELP ME WITH THIS QUESTION 40 POINTS RIGHT ANSWERS ONLY!! :)
What volume in liters of 1.5 m cacl2 solution can be made using 1200.0 g cacl2
sorry ..................
The molar mass of CaCl2 is 110.98 g/mol. So, 1200.0 g of CaCl2 is equal to 1200.0 / 110.98 = 10.88 moles of CaCl2.
A 1.5 M CaCl2 solution contains 1.5 moles of CaCl2 per liter of solution. So, 10.88 moles of CaCl2 can be dissolved in 10.88 / 1.5 = 7.2 liters of solution.
Therefore, 7.2 liters of 1.5 M CaCl2 solution can be made using 1200.0 g of CaCl2.
Here is the solution in equation form:
```
Molarity = moles / volume
1.5 M = 10.88 moles / volume
volume = 10.88 moles / 1.5 M
volume = 7.2 liters
```
Approximately 7.21 liters of a 1.5 M CaCl₂ solution can be made using 1200.0 g of CaCl₂.
To calculate the volume of a 1.5 M CaCl₂ solution that can be made using 1200.0 g of CaCl₂, you need to follow these steps:
Determine the molar mass of CaCl₂: Calcium (Ca) has an atomic mass of 40.08 g/mol, and chlorine (Cl) has an atomic mass of 35.45 g/mol. Since CaCl₂ consists of one calcium atom and two chlorine atoms, the molar mass of CaCl₂ is calculated as follows:
Molar mass of CaCl₂ = (1 * atomic mass of Ca) + (2 * atomic mass of Cl)
= (1 * 40.08 g/mol) + (2 * 35.45 g/mol)
= 40.08 g/mol + 70.90 g/mol
= 110.98 g/mol
Calculate the number of moles of CaCl₂: Divide the given mass of CaCl₂ (1200.0 g) by its molar mass (110.98 g/mol):
Moles of CaCl₂ = Mass of CaCl₂ / Molar mass of CaCl₂
= 1200.0 g / 110.98 g/mol
≈ 10.81 mol
Calculate the volume of the solution: The concentration of the solution is given as 1.5 M, which means there are 1.5 moles of CaCl₂ per liter of solution. You can use the following formula to calculate the volume of the solution:
Volume (in liters) = Moles of solute / Concentration
= 10.81 mol / 1.5 mol/L
≈ 7.21 L
Therefore, approximately 7.21 liters of a 1.5 M CaCl₂ solution can be made using 1200.0 g of CaCl₂.
Learn more about Volume from the link given below.
https://brainly.com/question/28058531
#SPJ2
Use the bond energies provided to estimate ?H°rxn for the reaction below.
PCl3(g) + Cl2(g) ? PCl5(l)
?H°rxn = ?
Bond Bond Energy (kJ/mol)
Cl-Cl 243
P-Cl 331
The value of ΔH°rxn for the reaction PCl₃ (g) + Cl₂ (g) ⟶ PCl₅ (l) is -222 kJ/mol.
What is the enthalpy change, ΔH°rxn for the reaction?The ΔH°rxn for the reaction PCl₃ (g) + Cl₂ (g) ⟶ PCl₅ (l) is calculated using the concept of bond energies.
ΔH°rxn = (Bonds broken) - (Bonds formed)Given bond energies:
Cl-Cl = 243 kJ/mol
P-Cl = 331 kJ/mol
Bonds broken:
3 × P-Cl = 3 × 331 kJ/mol = 993 kJ/mol
Bonds formed:
5 × Cl-Cl = 5 × 243 kJ/mol = 1215 kJ/mol
ΔH°rxn = 993 kJ/mol - 1215 kJ/mol
ΔH°rxn = -222 kJ/mol
Learn more about enthalpy change of a reaction at: https://brainly.com/question/15174388
#SPJ4
calculate the ph when 55.0 ml of 0.150 m hno₃ is mixed with 40.0 ml of 0.250 m lioh.
The pH can be calculated as pH = -log[H+]pH = -log(9.5 x 10^-14) = 13.02. Therefore, the pH of the resulting solution is 13.02.
To determine the pH of the resulting solution, we first need to calculate the number of moles of HNO3 and NaOH that react when they are mixed together. After calculating the number of moles of reactants, we can use an ICE table to determine the concentration of H+ and OH- ions present in the solution and hence determine the pH. Let's begin by calculating the moles of HNO3 and NaOH. A number of moles of HNO3:moles of HNO3 = volume x concentration mol = 55.0 mL x 0.150 mol/L = 0.00825 molNumber of moles of NaOH: moles of NaOH = volume x concentration mol = 40.0 mL x 0.250 mol/L = 0.010 molSince NaOH and HNO3 react in a 1:1 stoichiometry (i.e. one mole of HNO3 reacts with one mole of NaOH), it can be seen that NaOH is the limiting reagent. Therefore, all of the moles of NaOH (0.010 mol) will react with an equal amount of moles of HNO3. The moles of HNO3 that remain will be equal to the initial moles of HNO3 minus the moles of NaOH used to react with it. Therefore: moles of HNO3 remaining = moles of HNO3 initially - moles of NaOH reacted moles of HNO3 remaining = 0.00825 - 0.010 = -0.00175 mol.
It can be seen that there are no moles of HNO3 remaining in the solution as the amount of NaOH added is greater than the amount of HNO3 initially present. Now, we need to determine the concentration of H+ and OH- ions present in the solution using an ICE table: NaOH + HNO3 ⇌ NaNO3 + H2ONaOH HNO3 NaNO3 H2OInitial (mol) 0.010 0.00825 0 0Change (mol) -0.010 -0.00825 +0.010 +0.010Equilibrium (mol) 0 0 0.010 0.010From the ICE table, the concentration of OH- ions can be calculated to be 0.010/0.095 = 0.1053 M. The concentration of H+ ions can be calculated by using the formula Kw = [H+][OH-] where Kw is the ion product constant of water and is equal to 1.0 x 10^-14 M^2 at 25°C.Kw = [H+][OH-]1.0 x 10^-14 M^2 = [H+][0.1053 M].
Therefore, [H+] = 9.5 x 10^-14 M.The pH can be calculated as pH = -log[H+]pH = -log(9.5 x 10^-14) = 13.02Therefore, the pH of the resulting solution is 13.02. Answer: The pH of the resulting solution is 13.02.
know more about pH
https://brainly.com/question/2288405
#SPJ11
According to Coulomb's law, which ionic compound A-D has the largest electrostatic potential energy (i.e., largest in magnitude)? CaCl2 AlCl3 CoCl2
The required correct answer is AlCl3
Explanation: According to Coulomb's law, the ionic compound with the largest electrostatic potential energy is the compound having the largest magnitude.
Electrostatic potential energy (EPE) of ionic compounds is calculated by the Coulomb's law equation which states that:EPE ∝ (Q1 × Q2) / rwhere,Q1 and Q2 are the charges of two ionic particles.r is the distance between the two ionic particles.The larger the values of Q1 and Q2, the larger will be the EPE of the compound.
Now, looking at the given compounds:
CaCl2 has two charges of 1- and 2+, thus Q1 and Q2 values are both
Calculating the EPE of CaCl2 we get;EPE of CaCl2 = (1 × 2) / (1.5 × 10⁻¹⁰) = 1.33 × 10¹⁰ J/mol
AlCl3 has three charges of 1- and 3+, thus Q1 and Q2 values are both
Calculating the EPE of AlCl3 we get;EPE of AlCl3 = (1 × 3) / (1.5 × 10⁻¹⁰) = 2.00 × 10¹⁰ J/mol
CoCl2 has two charges of 1- and 2+, thus Q1 and Q2 values are both
Calculating the EPE of CoCl2 we get;EPE of CoCl2 = (1 × 2) / (1.5 × 10⁻¹⁰) = 1.33 × 10¹⁰ J/mol
Therefore, AlCl3 has the largest magnitude of EPE of 2.00 × 10¹⁰ J/mol as compared to the other ionic compounds CaCl2 and CoCl2. Hence, the ionic compound AlCl3 has the largest electrostatic potential energy among the given compounds.
Learn more about electrostatic potential energy here https://brainly.in/question/19615914
#SPJ11
A 25-mL aliquot of a 0.0104 M KIO3 solution is titrated to the end point with 17.27 mL of a sodium thiosulfate, Na2S2O3, solution using a starch-iodide indicator. What is the molar concentration of the Na2S2O3 solution?
I know this question has been asked on Chegg before but there are a lot of different methods and answers and I am not sure which is correct.
To determine the molar concentration of the sodium thiosulfate (Na₂S₂O₃) solution, we can use the concept of stoichiometry. Therefore, the molar concentration of the Na₂S₂O₃solution is 0.015 M.
The balanced chemical equation for the reaction between KIO₃ and Na₂S₂O₃.
The balanced equation for the reaction is as follows:
2Na₂S₂O₃+ 2KI + H₂O -> Na₂S₄O₆ + 2KOH + I2
From the balanced equation, we can see that the ratio ofNa₂S₂O₃to KIO₃ is 2:1.
Given:
Volume of KIO₃solution = 25 mL = 0.025 L
Molar concentration of KIO₃ solution = 0.0104 M
Volume of Na₂S₂O₃ solution = 17.27 mL = 0.01727 L
To find the molar concentration of Na₂S₂O₃ we can use the following formula:
Molarity of KIO₃ x Volume of KIO₃ solution = Molarity of Na₂S₂O₃ x Volume of Na₂S₂O₃ solution
0.0104 M x 0.025 L = Molarity of Na₂S₂O₃ x 0.01727 L
Rearranging the equation to solve for the molarity of Na₂S₂O₃:
Molarity of Na₂S₂O₃= (0.0104 M x 0.025 L) / 0.01727 L
Molarity of Na₂S₂O₃ = 0.015 M
Therefore, the molar concentration of the Na₂S₂O₃ solution is 0.015 M.
To know more about molar concentration
https://brainly.com/question/26255204
#SPJ11
"Crystal of atom" is
a)cubical
b)rhombus
c)octahedral
d) combination of all
The answer is d) combination of all. Crystals can have different shapes and structures depending on the arrangement of atoms in the crystal lattice. Some crystals may have a cubic structure, while others may have a rhombus or octahedral structure. Therefore, "crystal of atom" can have a combination of all these structures.
[tex]\huge{\mathfrak{\colorbox{black}{\textcolor{lime}{I\:hope\:this\:helps\:!\:\:}}}}[/tex]
♥️ [tex]\large{\textcolor{red}{\underline{\mathcal{SUMIT\:\:ROY\:\:(:\:\:}}}}[/tex]
draw the reaction mechanism, using curved arrows, for the reaction converting the aminocarboxylate salt back to the carboxylic acid of ibuprofen
To convert the amino carboxylate salt back to the carboxylic acid of ibuprofen, you would typically perform a hydrolysis reaction. This reaction involves the addition of water to break the ester bond and regenerate the carboxylic acid.
The reaction mechanism can be described as follows:
The aminocarboxylate salt reacts with water, which acts as a nucleophile. The oxygen atom of water attacks the carbon atom of the ester group, forming a tetrahedral intermediate.
The tetrahedral intermediate is unstable and undergoes a proton transfer. One of the hydrogen atoms from water is transferred to the oxygen atom, while the electron pair from the oxygen atom is transferred to the adjacent carbon atom. This step leads to the formation of an alkoxide ion and a protonated amine.
The alkoxide ion, now formed from the carboxylic acid moiety, is protonated by water. This step regenerates the carboxylic acid and produces a hydroxide ion.
The overall reaction can be represented as:
Aminocarboxylate salt + H2O → Carboxylic acid + Hydroxide ion
To know more about amino carboxylate
https://brainly.com/question/30617358
#SPJ11
With the aid of a periodic table, arrange the following in order of increasing electronegativity: Li, Na Ca
B, Be, Li
S, Se, Cl
The complete order of increasing electronegativity is:Be < B < Li < Na < Ca < S < Se < Cl
Electronegativity is the tendency of an atom to attract the electrons of a covalent bond towards itself. It can be arranged using a periodic table by determining the groups and periods. The trend is the increase of electronegativity from left to right and bottom to top. The elements that are further from each other in the periodic table will have a higher electronegativity.Here's how to arrange the following elements in order of increasing electronegativity:Li < Na < CaFor B, Be, Li, it is arranged as: Be < B < LiFor S, Se, Cl, it is arranged as: S < Se < ClSo, the complete order of increasing electronegativity is:Be < B < Li < Na < Ca < S < Se < Cl.
Learn more about electronegativity here:
https://brainly.com/question/3393418
#SPJ11
a first-order reaction is 58omplete at the end of 11 min. what is the value of the rate constant?
A first-order reaction is 58% complete at the end of 11 min. The value of the rate constant is 0.0427 min⁻¹.
A first-order reaction can be defined as a chemical reaction in which the reaction rate is linearly dependent on the concentration of only one reactant.
To determine the value of the rate constant for a first-order reaction, we can use the equation for the reaction progress:
ln([A]t/[A]0) = -kt
where:
[A]t is the concentration of the reactant at time t,
[A]0 is the initial concentration of the reactant,
k is the rate constant, and
t is the reaction time.
Given that the reaction is 58% complete at the end of 11 min, we can write the equation as:
ln(0.58) = -k * 11
k = -ln(0.58) / 11
k ≈ -ln(0.58) / 11 ≈ 0.0427 min⁻¹
Therefore, the value of the rate constant for the first-order reaction is approximately 0.0427 min⁻¹.
To know more about first-order reaction here
https://brainly.com/question/31661139
#SPJ4