Which combination of elements will form an ionic bond?
O potassium and chlorine
O oxygen and fluorine
nitrogen and helium
• sodium and calcium

Answers

Answer 1

potassium and chlorine combination of elements will form an ionic bond.

What makes an ionic bond?Ionic bonding, a sort of chemical bonding that involves the electrostatic attraction between two atoms or ions. sharply differing charges, is the main interaction that takes place in ionic compounds. Along with covalent and metallic bonds, ionic bonding is one of the fundamental forms of bonding. Atoms possessing an electrostatic charge are referred to as ions.Negatively charged ions are produced when atoms gain electrons (called anions). When atoms lose electrons, they produce positively charged ions (called cations). In contrast to covalence, this transfer of electrons is known as electrovalence.

To learn more about : ionic bond

Ref : https://brainly.com/question/17289500

#jsp2


Related Questions

Write the isotope notation for an atom that has 7 protons and 9 neutrons.

Answers

Answer:

N-16

Explanation:

Atom has 7 protons so it's atomic number is 7, which is Nitrogen

so isotope is 7 + 9 = 16

then it's N-16

what intermolecular forces are present in pure samples of both ch₃ch₂ch₂f and ch₃ch₂ch₂oh? a) dispersion forces only. b) dipole-dipole forces only. c) dispersion forces, dipole-dipole forces, and hydrogen bonding. d) dispersion forces and dipole-dipole forces

Answers

Dispersion forces and dipole-dipole forces are present in pure samples of both ch₃ch₂ch₂f and ch₃ch₂ch₂oh.

What is Dispersion forces?The least attractive inter molecular forces are dispersion forces. Dispersion forces are responsible for the liquification of low molecular weight, non-polar molecules including hydrogen (H2), neon (Ne), and methane (CH4).It is crucial to think about the instantaneous distribution of electron density rather than the average distribution in order to visualize the source of dispersion forces.Molecules can be categorized as polar or nonpolar according to their polarity. In contrast to non-polar molecules, which have no charges at all on either side of the molecule, polar molecules have partial charges on both of their poles.

To learn more about Dispersion forces Refer:

https://brainly.com/question/1454795

#SPJ9

How can the number of electrons be predicted in a neutral atom? _________________________________________________________________________ _________________________________________________________________________

Answers

The number of electrons can be predicted in a neutral atom  because the number of protons and electrons in a neutral atom will be identical, we can readily calculate the electron number from the atomic number.

What can be used to predict the number of electrons?

An atom's atomic number can be used to forecast its electrical structure. The atomic number can be used to forecast the total number of electrons because neutral atoms have an equal number of protons and electrons.

So, If you know what group the atom's element belongs to and the group number correlates to the number of electrons on the valence shell and you can determine how many atoms are on the atom's valence shell.

Learn more about electrons from

https://brainly.com/question/25674345
#SPJ1

HELP QUICK PLEASE
The table shows the number of charged particles in an ion.
Charged Particles
Charge on Particle Number of Particles
Positive
Negative
3
2
A negatively charged substance is brought near the ion. What will most likely happen and why?
O a
Ob
Oc
Od
The ion will repel the substance because the ion has more electrons than protons.
The ion will repel the substance because the ion has more protons than electrons.
The ion will attract the substance because the ion has more electrons than protons.
The ion will attract the substance because the ion has more protons than electrons.

Answers

Going by the remnant charge, if a negatively charged substance is brought near the ion, an attraction will take place. The ion will attract the substance because the ion has more protons than electrons.

Attraction and repulsion of ions

According to established law, substances with like charges repel one another while those with unlike charges tend to attract.

Considering the ion in question, there are 3 positive and 2 negative charges. This means that the ion has one remnant positive charge. In other words, the ion has more protons than electrons.

If a substance that is negatively charged is brought near the ion, an attraction will take place. This is because both the ion and the substance have unlike charges.

In summary, there will be an attraction between the ion and the substance because the ion has more protons (positive charges) than electrons (negative charges).

More on the law of attractions can be found here: https://brainly.com/question/2287677

#SPJ1

Answer:

The ion will repel the substance because the ion has more protons than electrons.

Explanation:

Because the ion has more protons than electrons the ion will repel the substance :)

measurements of zircon crystals containing trace amounts of uranium from a specimen of granite yield parent/daughter ratios of 25 percent parent (uranium-235) and 75 percent daughter (lead-206). the half-life of uranium-235 is 704 million years. how old is the granite?

Answers

The age of the granite given it contains 25% parent (uranium-235) and 75% daughter (lead-206) is 1408 million years

We'll begin by calculating the number of half lives that has elapsed. This can be obtained as follow:

Original amount (N₀) = 100%Amount remaining (N) = 25%Number of half-lives (n) =?

2ⁿ = N₀ / N

2ⁿ = 100 / 25

2ⁿ = 4

2ⁿ = 2²

n = 2

How to determine the age of the granite

The age of the granite can be obtained as follow:

Half-life (t½) = 704 million years.Number of half-lives (n) = 2 Age (t) =?

n = t / t½

Cross multiply

t = n × t½

t = 2 × 704

t = 1408 million years

From the calculations made above, we can conclude that the age of the granite is 1408 million years

Learn more about half life:

https://brainly.com/question/26374513

#SPJ1

94. Determine the number of moles of oxygen atoms in each sample. a. 4.88 mol H₂O₂ b. 2.15 mol N₂O c. 0.0237 mol H₂CO3 d. 24.1 mol CO₂​

Answers

a)The 4.48 mol H₂O₂ contains 8.96 moles of oxygen atoms.

b)The 2.15 mol N₂O contains 2.15 moles of oxygen atoms.

c)The 0.0237 moles H₂CO₃ contains 0.0711 moles of oxygen atoms.

d)The 24.1 mol CO₂ contains 48.2 moles of oxygen atoms.

What is a mole ?

A mole is 6.02214076 x 1023 of any chemical unit, comprising atoms, molecules, ions, and others. Due to the large number of atom, molecules, or other components that comprise any material, the mole is an useful unit to utilize.

Briefing:

There are two moles of H and two moles of O in every mole of H₂O₂

There are two moles of N and one mole of O in every mole of N₂O

There are 2 moles of H, 1 mole of C, and 3 moles of O in a mole of H₂CO₃

1 moles of C and 2 moles of O are present for every mole of CO₂

Taking this into account:

The number of moles of oxygen atoms present in a 4.88 moles sample of H₂O₂ can be determined by:

[tex]\text { 4.48 molesof } \mathrm{H}_2 \mathrm{O}_2 x \frac{2 \text { moleso foxygen }}{1 \text { moleof } \mathrm{H}_2 \mathrm{O}_2}=[/tex]8.96 moles of oxygen atoms

The 4.48 mol H₂O₂ contains 8.96 moles of oxygen atoms.

The number of moles of oxygen atoms present in a 2.15 moles sample of N₂O can be determined by:

[tex]2.15 \text { molesof } N_2 O x \frac{1 \text { molesofoxygen }}{1 \text { moleof } N_2}=[/tex]2.15 moles of oxygen atoms

The 2.15 mol N₂O contains 2.15 moles of oxygen atoms.

The number of moles of oxygen atoms present in a 0.0237 moles sample of H₂CO₃ can be determined by:

[tex]0.0237 \text { molesof } \mathrm{H}_2 \mathrm{CO}_3 x \frac{3 \text { moleso foxygen }}{1 \text { moleof } \mathrm{H}_2 \mathrm{CO}_3}=[/tex]0.0711 moles of oxygen atoms

The 0.0237 moles H₂CO₃ contains 0.0711 moles of oxygen atoms.

The number of moles of oxygen atoms present in a 24.1 moles sample of CO₂ can be determined by:

[tex]24.1\text { molesofC } \mathrm{CO}_2 x \frac{2 \text { moleso foxygen }}{1 \text { moleof } \mathrm{CO}_2}[/tex]=48.2 moles of oxygen atoms

The 24.1 mol CO₂ contains 48.2 moles of oxygen atoms.

To know more about mole visit:

https://brainly.com/question/26416088

#SPJ13

5. If you were making a metal pot for cooking, would you want a metal that transferred heat efficiently
or a metal that did not transfer heat efficiently?

Answers

Answer:

You would want a metal that transfered heat efficiently.

Explanation:

We use metal frying pans to cook our food because they conduct heat. They are conductors of heat, if it was not so, they could not be used for cooking food.

Hope this helps! :)

true or false Infrared wavelengths can carry heat and are used in communications

Answers

Answer:

false

Explanation:

can carry heat, not communication

What is this element
1s2 2s2 2p6 3s2 3p2
has 4 valence electrons​

Answers

Answer:

Silicone

Explanation:

Silicone matches all the things

Consider the following reaction

2H20 — 2H2 + 02

The rate of production of O2 is 3.9 x 10-¹ mols/s. How many seconds will it take to decompose 175g H20

Answers

Answer:

The chemical reaction 2H2+O2→2H2O 2 H 2 + O 2 → 2 H 2 O is classified as a synthesis reaction.

Explanation:

1
Students completed a flame test lab and recorded their results in the data table
below.
Compound
Potassium chloride
Sodium chloride
Lithium chloride
Calcium chloride
Unknown
Color
Lavender
Yellow-orange
Red
Orange
Red
Which of the following choices best explains why the students were able to identify
the unknown as lithium chloride?

Answers

The student observed the solution before it wind put into the flame and realized it was similar in texture and colour to,  the lithium chloride the teacher showed them. When they  saw that both lithium chloride and the unknown produced a red flame, they were sure that the unknown must have been lithium chloride as well

What is chemical compound?

A compound refers to a substance consisting of identical molecules composed of atoms of two or more chemical elements.  That is called a chemical compound. A chemical compound means a chemical substance consisting of several similar molecules containing elements of several elements.

Most notably, these molecules are linked by chemical bonds.  A chemical formula expresses the number of atoms of each element in a molecule of a compound. In addition, this chemical formula uses standard abbreviations for chemical elements with numerical signatures.

To learn more about chemical compound, visit;

https://brainly.com/question/26487468

#SPJ13

Can someone describe what is the role of hemoglobin?

Answers

Hemoglobin contains iron, which allows it to pick up oxygen from the air we breathe and deliver it everywhere in the body. You can think of hemoglobin as the iron ("heme"), oxygen transport protein, ("globin") found in red blood cells. It's the hemoglobin that gives red blood cells their color, too.

write balanced equations for each of the following by insert- ing the correct coefficients in the blanks: (a) cu(no3)2(aq) koh(aq) ⟶ cu(oh)2(s) kno3(aq) (b) bc13(g) h2o(l) ⟶ h3(bo3(s) hc1(g) (c) casio3(s) hf(g) ⟶ sif4(g) caf2(s) h2o(l) (d) (cn)2(g) h2o(l) ⟶ h2c2o4(aq) nh3(g

Answers

The balanced reaction equations are given below. They are all examples of double displacement.

a) balanced reaction equation of the reaction between aqueous copper(II) nitrate and aqueous potassium hydroxide, resulting in the formation of solid copper(II) hydroxide and aqueous potassium nitrate

[tex]Cu(NO_{3} )_{2}(aq)+2KOH(aq)[/tex] → [tex]Cu(OH)_{2} (s) + 2KNO_{3}(aq)[/tex]

b) balanced reaction equation of the double displacement between gaseous boron cyanide and liquid water resulting in the formation of solid boric acid and gaseous hydrogen cyanide

[tex]2B(CN)_{3} (g) + 6H_{2} O[/tex] → [tex]2H_{3} BO_{3} (s)+6HCN(g)[/tex]

c) balanced reaction equation between solid calcium silicate and gaseous hydrogen fluoride resulting in the formation of gaseous silicon fluoride, solid calcium fluoride and liquid water

[tex]CaSiO_{3}(s) + 6HF (g)[/tex] → [tex]SiF_{4}(g)+CaF_{2}(s)+3H_{2}O(l)[/tex]

d) balanced reaction equation between cyanogen gas and liquid water resulting in formation of aqueous oxalic acid and gaseous ammonia

[tex](CN)_{2}(g) + 4H_{2} O (l)[/tex] → [tex]H_{2} C_{2} O_{4} (aq) +2NH_{3} (g)[/tex]

You can learn more about double displacement reactions here:
brainly.com/question/13522228

#SPJ4

using the actual moles of o2 you determined from your experiment (n) and the theoretical moles of o2 you just calculated, show your calculations from experiment 1: ideal gas law - finding percent h2o2 with yeast for determining the percent hydrogen peroxide in your experimental sample.

Answers

Theoretical mass (O₂)= H₂O₂ Volume×  H₂O₂ density× {( 1 mol O₂)/(2 mol H2O2)}×{( mol of  H₂O₂ /g  H₂O₂ )}

H2O2 Volume= 5 ml

Known density( H₂O₂ )= 1.02 g/ml

Molar mass ( H₂O₂ )= 34.01 g/mol

Reciprocal molar mass(  H₂O₂ )= 0.0294

Theoretical mass( O₂)= 5×1.02× 0.0294× 1/2= 0.0749 moles

Actual moles of O₂ and percentage of  H₂O₂

P= 753 mm Hg×1 atm/760 mm Hg= 0.991 atm

V= 45  ml× 1L /1000 ml= 0.045 L

n= PV/RT

Actual moles ( O₂)= (0.991×0.045)/(0.0821×296 K)= 0.0445/24.3016= 1.8×10^-3 moles

Percentage ( H₂O₂ )= Theoretical moles(O₂)×100= 0.0749×100= 7.49%

Mass of  H₂O₂ (percent)= 3%

Concentration by mass( H₂O₂ )= 3 gm H2O in 100 ml of H2O

Volume ( H₂O₂ )= 100 ml

1 mol ( H₂O₂ )= 34.02 g O2

(3g  H₂O₂ /100 ml Solution)×( 1 mol  H₂O₂ /34.02 g H2O2)

No. Of moles ( H₂O₂ )= 0.088 moles

Mass ( H₂O₂ )= 0.088 moles × 34.02 = 2.99 g

%  H₂O₂ = (2.99 g  H₂O₂ /100 ml Solution)×100= 2.99%

% error= (%  H₂O₂ from the bottle-experiment %  H₂O₂ )/(% H₂O₂ from bottle)×100

=[ (3-2.99)/(3) ]× 100= 0.34% error.

Learn more about H₂O₂ here:- https://brainly.com/question/25566753

#SPJ1

a pure sample of a new chemical compound was analyzed and was found to have the following mass percentages: al 31.5 %; o 56.1 %; s 12.4 %. which of these could be the empirical formula of the compound?

Answers

Answer: supercalifragilisticexpialidocuos

Explanation:

Vinegar or acetic acid has the formula CH3COOH. Based on its structure what kind of intermolecular forces would you expect in this compound?

Answers

Vinegar or acetic acid(CH3COOH) has intermolecular forces  of hydrogen bonding, dipole-dipole interactions and dispersion force.

What are intermolecular forces?

Intermolecular forces can be defined as the attractive and repulsive forces that arise between the molecules of a substance.

Intermolecular forces includes the electromagnetic forces of attraction or repulsion which act between atoms and other types of its close particles such as atoms or ions.

Vinegar or acetic acid(CH3COOH) has intermolecular forces  of hydrogen bonding, dipole-dipole interactions and dispersion force.

Vinegar or acetic acid(CH3COOH)  has an especially strong type of hydrogen bonding. In solid state, the molecules in the acetic acid form cyclic pairs connected by hydrogen bonds. Thus, making it to have a low volatility.

Learn more about intermolecular forces at:

https://brainly.com/question/2193457

#SPJ1

Student Exploration: Determining Density via Water Displacement
Directions: Follow the instructions to go through the simulation. Respond to the questions and
prompts in the orange boxes.
Vocabulary: Archimedes' principle, density, displacement, mass, volume
Prior Knowledge Questions (Do these BEFORE using the Gizmo.)
A ship floats by an iceberg as shown.
1. Based on the picture, which object is denser, the
iceberg or the ship?
2. How do you know?

Answers

1. Iceberg

2. The iceberg is more underwater than the ship.

Thanks to radar technology better crew training and iceberg monitoring systems, ship collisions with icebergs are generally avoidable, but when a collision does occur, the consequences can be devastating. These things are very rare. One of the rare but high-impact risks. The Titanic was neither the first nor the last ship to hit an iceberg and sink.

Here are the ten most sunk ships in the world in terms of lives lost due to iceberg accidents. A second study by British historian Tim Martin argued that atmospheric conditions on the night of the disaster may have caused a phenomenon called super refraction. This diffraction of light may have created a mirage or optical illusion that obscured the iceberg from the Titanic's vantage point.

Learn more about An iceberg here:-https://brainly.com/question/17873919

#SPJ1

Plss answer and I will give the brainliest.

If a typical aluminum beverage can weighs 13.5 grams, how much alum could you produce for every 210 cans collected. Show your work, based on your own experiment.

The following is what I got from my experiment.
- mass of aluminum can: 0.4996 grams
- mass of alum produced:- 5.183 grams
Molar mass of aluminum: 26.98 grams

Answers

The alum produced during experiment for every 210 can is 38.21 kg

What is experiment?

Experiment can be defined as a technique used to establish or refute a hypothesis, or to determine the efficacy or likelihood of anything new.

It can also be defined as a series of acts and observations carried out in the context of attempting to solve a specific problem or question.

According to your experiment 0.4996 gram of aluminum will produce 5.183 grams of alum.

Mass of 1 aluminum can = 13.5 g

Mass of 210 can = 13.5 x 210 = 2835g

Mass of alum produced by one gram of aluminum = 13.48 g

Mass of alum produced by 2835 g = 13.48 x 2835

                                                          = 38.21 kg

The amount of alum produced by 210 can = 38.21 kg

Thus, the alum produced during experiment for every 210 can is 38.21 kg

To learn more about experiment, refer to the link below:

https://brainly.com/question/11256472

#SPJ1

Household bleach is approximately a 0.850 m solution of sodium hypochlorite (naocl). how many grams of naocl are present in a cup (~250. ml) of bleach?

Answers

There's approximately 15.8 g of NaOCl in a cup of bleach. To calculate this we need to use the molarity of the bleach solution and the molar mass of sodium hypochlorite.

In order to convert the molarity to mass, we need the molar mass of sodium hypochlorite. We can calculate it by adding up the relative atomic masses of sodium (23), oxygen (16), and chlorine (35.5):

M (NaOCl) = (23 + 16 + 35.5) g/mol = 74.5 g/mol

Now we calculate the amount (in moles) of sodium hypochlorite present in 250 mL (0.25 L) of bleach:

c = n/V ⇒ n = c*V = 0.850 M * 0.250 L = 0.2125 mol of NaOCl

Using the molar mass, we can now calculate the mass required:

n = m/M ⇒ m = n*M = 0.2125 mol * 74.5 g/mol = 15.8 g of NaOCl

You can learn more about molarity here:
brainly.com/question/2817451

#SPJ4

a model train moves 18.3 m in 122 s. what is the train's average speed?

Answers

Given:

displacement(x)=18.3m

time(t)=122s

Average speed(v)=x/t

=18.3/122

=0.15m/s

Therefore,the train's average speed=0.15m/s

butane, c 4h {10}, reacts with o 2 to produce co 2 and h 2o. what volume of co 2 at 25 °c and 0.922 atm is produced from the reaction of 14.0 g of c 4h {10} with excess o 2? (r

Answers

Using ideal gas laws and the balanced reaction equation for the combustion of butane, we can calculate that the volume of produced carbon dioxide will be 25.6 L.

The balanced reaction equation for butane combustion looks like this:

[tex]2C_{4} H_{10} + 13O_{2}[/tex] → [tex]8CO_{2}+10H_{2} O[/tex]

We can see that 2 moles of butane (M = 58 g/mol) produce 8 moles of carbon dioxide. This allows us to set up a proportion that we can use to calculate the amount of carbon dioxide produced by the combustion of 14.0 g of butane:

116 g of butane : 8 moles of carbon dioxide = 14.0 g of butane : X

X = 8 moles of carbon dioxide * 14.0 g / 116 g = 0.9655 mol of carbon dioxide

Now, using the ideal gas laws, we can calculate the volume of released carbon dioxide.

PV = nRT ⇒ V = nRT/P = 0.9655 mol * 0.08206 Latm/Kmol * (25 + 273) K / 0.922 atm = 25.6 L

You can learn more about combustion here:

brainly.com/question/13153771

#SPJ4

Okay thanks for the update on

Answers

First, we have to know the rules to recognize significant numbers:

Zeros between two non-zero digits ARE significant.

are

All non-zero numbers are significant.

Trailing zeros to the right of the decimal are significant.

Leading zeros are not significant.

Trailing zeros in a whole number with the decimal shown are significant.

Trailing zeros in a whole number with no decimal shown are not significant.

After these rules, we can say that 890 has only 2 significant numbers.

Answer: 2 significant digits

PLSS HELP I NEED THIS ASAP!

Answers

 The correctly identified subatomic particle with its charge is  

Proton - Positive, Neutron -Neutral,  Electron - Negative

What is a neutron ?

The British physicist James Chadwick made the neutron discovery in 1932.

Neutrons are neutral subatomic particles that are a part of every atomic nucleus, except the exception of regular hydrogen. Its rest mass of 1.67927980 10-27 Kg is slightly larger than a proton but 1838.68 times greater than an electron. It has no electricity charge. The dense inner core of the atom is where protons and neutrons, collectively referred to as nucleons, are linked together and account for 99.9% of the mass of the atom.

To learn more about neutron , visit;

https://brainly.com/question/6357434

#SPJ13

fill in the missing information: symbol atom or ion? check all that apply number of protons number of electrons sr neutral atom cation anion neutral atom cation anion 35 36 si neutral atom cation anion

Answers

1) This is an Anion

2) This is a Cation

3) It is Neutral.

Atom: A chemical element is uniquely defined by its atoms, which are tiny pieces of substance. An atom is made up of a core nucleus and one or more negatively charged electrons that orbit it. The positively charged, comparatively hefty protons and neutrons that make up the nucleus may be present.

1) number of protons = 7

So, the atomic number = 7

N has an atomic number of 7.

charge = number of proton - number of electrons

= 7 - 10

= -3

So, this is an anion

symbol: N3-

atoms or ion: anion

number of protons = 7

number of electrons = 10

2) charge = +3

Pd has an atomic number of 46.

number of protons = 46

charge = number of proton - number of electrons

+3 = 46 - number of electron

number of electron = 43

since the charge is positive it is a cation

symbol: Pd3+

atoms or ion: cation

number of protons = 46

number of electrons = 43

3) number of protons is 28

So, the atomic number is 28

Ni has an atomic number of 28.

since it is neutral,

number of electron = number of proton = 28

symbol: Ni

atoms or ion: neutral atom

number of protons = 28

number of electrons = 28

To know more about Atoms, refer to this link:

https://brainly.com/question/13654549

#SPJ9

Q23. Ammonium nitrate is an important fertiliser. It is made by reacting nitric acid with the alkali
ammonia.
State the type of reaction taking place.

Answers

Answer:

It is a neutralization reaction.

ammonia reacts with oxygen according to the following equation. 4 nh3(g) 5 o2(g) equilibrium reaction arrow 4 no(g) 6 h2o(g) the enthalpy of reaction for this reaction is negative. identify two changes that could be made to the system to shift the equilibrium toward the products and two changes that could be made to shift the equilibrium toward the reactants. (select all that apply.) changes that would shift the equilibrium toward the products: increasing the volume of the system increasing the concentration of no or h2o decreasing the concentration of nh3 or o2 reducing the temperature of the system changes that would shift the equilibrium toward the reactants: increasing the volume of the system increasing the concentration of no or h2o decreasing the concentration of nh3 or o2 reducing the temperature of the system

Answers

Based on the number of particles involved and the enthalpy of the reaction, changes that would shift the equilibrium to the right would, according to Le Chatelier's principle, include increasing the volume of the system, reducing the pressure of the system, reducing the temperature of the system, increasing the concentration of ammonia and/or oxygen and reducing the concentration of NO and/or water. Changes in the opposite direction would cause the equilibrium to shift towards the reactants.

Upon increasing pressure or reducing volume, the equilibrium shifts in the direction that produces fewer gaseous particles. In this case, that's the reactants (9 molecules) and not the products (10 molecules). When considering temperature, it is useful to consider heat as one of the reaction components. When the enthalpy of the reaction is negative, heat is produced so it can be considered to be one of the products. Le Chatelier's principle states that upon changing one of the variables, the equilibrium will shift in the direction that counteracts the effects of the change. So, when reducing the temperature of the system, we are taking the heat out of the system, so equilibrium will shift to the products so that it can produce more heat, and vice versa. The same principle applies to the concentrations of ammonia, oxygen, water, and NO.

You can learn more about Le Chatelier's principle here:
brainly.com/question/2001993

#SPJ4

You discover a piece of jewelry that you think might be made of silver. You place the item on a balance and determine that it has a mass of 12.2 grams. It displaces 1.9 cm 3 of water when placed in a graduated cylinder. Is this item made of pure silver? Show your work.

Answers

No, this item is not made of pure silver because if it has been made from pure silver that it would have displaced only 1.16cm³ of water but due to the addition of some other low-density element it displaces 1.9cm³ of water.

For pure silver

density of pure silver is = 10.49 g/cm³

mass of silver = 12.2 gram

since, density = mass/volume

          volume = mass/density

                        = 12.2/10.49 cm³

                         = 1.16 cm³

But the actual displaced water is 1.9cm³, which means some other element of lower density has been added.

Therefore, it is clear that the given jewelry is not made of pure silver.

Learn more about silver here:-https://brainly.com/question/17086277

#SPJ1

Explain the difference between an ionic and covalent bond: question 1 options: covalent bonding produces electron transfer causing the atoms to become ions (cations and anions). ionic bonding allows atoms to share electrons. covalent bonding allows atoms to share electrons. ionic bonding produces electron transfer causing the atoms to become ions (cations and anions). oppositely charged atoms form ions and are attracted to each other. this can be either an ionic or covalent bond.

Answers

The difference between covalent and ionic bonds is that covalent bonding allows atoms to share electrons, but ionic bonding cause electron transfer, leading the atoms to form ions (cations and anions), and these oppositely charged ions are attracted to each other.

Atoms combine to create compounds in order to complete their octet and to achieve stability. This can be done by combining with other atoms either by electron sharing or electron transfer from one atom to another. Therefore, covalent bonds are created when electrons are shared, whereas ionic bonds are created when electrons are transferred.

Ionic bonds are generally formed between metal and nonmetal atoms. Non-metallic atoms gain electrons to form a negatively charged ion, while metallic atoms lose electrons to form positively charged ions. An atom becomes a cation when one or more of its electrons are lost, while an atom forms an anion when one or more electrons are gained. Hence, an ionic bond is formed as a result of the electrostatic attraction between oppositely charged ions.

A covalent bond, on the other hand, is formed between non-metal atoms as a result of electron sharing.

Therefore, an ionic bond is an attraction between ions with opposite charges whereas a covalent bond is the sharing of electrons between atoms.

Read more about Ionic & Covalent Bonds:

https://brainly.com/question/13640352

#SPJ9

• 1.0g of hydrogen reacts Completely with 19.0g of florine.
What is the percent by mass of hydrogen in the Compound
that is formed?

Answers

The percentage by mass of hydrogen in the Compound that is formed is found to be 5% if 1.0g of hydrogen reacts Completely with 19.0g of fluorine.

Mass Percent

A component in a particular combination or a concentration can be described using the mass percent symbol. The mass of solute contained in a specific mass of solution is indicated by the mass percentage used to characterize the solution composition. The concentration of the solute is expressed in terms of mass or moles.

What does “% by mass” mean?

As a mass percentage, an element's concentration in a compound or component of a combination can be represented. The mass percentage is calculated by multiplying the result by 100% after dividing the combined mass by the masses of each component. Also called Mass Percent or (w/w) Percent.

[tex]\frac{1}{2} H_{2} + \frac{1}{2} F_{2}[/tex] →[tex]HF[/tex]

Percentage by mass hydrogen

= (Mass of hydrogen) / (Mass of Hydrogen fluoride) x 100%

= [tex]\frac{1}{20}[/tex] x 100%

=5%

To know more about percent by mass visit:

https://brainly.com/question/14990953

#SPJ9

Can someone tell me if this is correct please

No links please

Answers

Answer:

21.107

Explanation:

because this answer gives you 10 and also 90

Other Questions
How do you tell the difference in atoms Germans address others at work using: O Sie or Du O Sie ODu OMann What makes terraced farming necessary? Insecure territory that could be attacked A society with many distinct social classes Mountainous or uneven terrain Soil that lacks adequate nutrients on its own Which of the following choices are equivalent to theexpression below? Check all that apply.A. XB. (**)D D. &E (2)19F. What is the least common multiple of 10 and 20? Write a short story about what the name "Clareese" means to youNo linksNeed this ASAP The cost to stay in a hotel room was. There was also a tax charged on the room. What was the total cost of the room with tax included? Name two species that influence each other and give examples of how this relationship between the species may have influenced the development of each species. If 15% of coins are quarters and there are 12 quarters, what is the total # of coins About IcelandWhat types of public policies should the government of this country EXPLORE based on the composition of the population pyramid? A table showing Rate in kilometers per hour, Time in hours, and Distance in kilometers. The first row shows, Trip 1, and has 40, 0.9 minus x, and 40 left-parenthesis 0.9 minus x right-parenthesis.Talia took the bus from her home to the bank and then walked back to her home along the same route. The bus traveled at an average speed of 40 km/h and she walked at an average speed of 5 km/h. To determine the time, x, that it took Talia to walk home, she used the equation40(0.9 x) = 5x.The time of Trip 2 is hours.The distance of Trip 1 is km. contract manufacturers who manage their customers' entire product lines and offer services ranging from inventory management to delivery and after-sales services are prime examples of vertical integration. Lowes counted the number of customers entering the store for a week. The results were 1,100; 950; 1,100; 1,700; 880; 920; and 1,100. What is the mode? The best answer get brainliest What is the most toxic chemical ever? Check all that apply to Daniel Boone:Born in the coloniesgained fame in the French and Indian Warblazed the Wilderness Roadchildhood friend of Abraham Lincolnthe draft of his biography lost in a canoe accident supporters of the constitution, known as , included george washington and benjamin franklin. (please spell carefully and make sure to only enter one complete word per space.) just send a packet (any type) to the destination, with its time-to-live (ttl) field set to 1 first. this packet will be dropped by the first router, which will send us an icmp error message, telling us that the time-to-live has exceeded. that is how we get the ip address of the first router. we then increase our ttl field to 2, send out another packet, and get the ip address of the second router. we will repeat this procedure until our packet finally reach the destination. Differenciate between direct and direct channel of distribution A line that includes the points (c, -10) and (-8,-8) has a slope of -1/8 what is the value of c