Answer: Rb is more reactive
Explanation: The reason rubidium is more reactive is because it loses its valence electron more readily than Mg does.
Answer:
Rb
Explanation:
Mg has 2 valence electrons to loose vs Rb has 1 valence electron to loose.
Rb wins because losing 1 electron is easier than having to lose 2, which means Rb is more reactive ("ready" to react).
Answer the following questions using the information from these videos. Be sure to use complete sentences.
1) What are the suspects accused of doing?
2) Describe how the suspects used the zinc metal and the zinc chloride solution to change the copper coins to silver.
(Hint: Additive or Displacement plating?)
3) How did the suspects make the silver coins look gold?
Based on the electroplating process video:
The suspects were accused of producing fake gold coins.The suspects used the zinc metal and the zinc chloride solution to change the copper coins to silver by additive plating.The suspects made the silver coins look gold by holding it over a roaring bunsen flame.What is electroplating?Electroplating is the process by which a metal is used to coat the surface of another substance.
The process of electroplating is done in order to improve the quality of the material being coated as well as to make it more durable.
In the video, the copper coins were plated with zinc by dipping the coins into a solution of sodium zincate.
The sodium zincate is prepared by dissolving powdered zinc in a sodium hydroxide solution.
The undissolved zinc powder in the solution will form a fine film of zinc over the copper making it looks shiny like zinc.
The zinc-coated coin is then held over a bunsen flame until it turns shiny gold.
Learn more about electroplating at: https://brainly.com/question/3913850
#SPJ1
(ii) In this lattice, the ratio of positive ions to negative ions is 1:1
In the lattice of a different ionic compound, the ratio of positive ions to
negative ions is 1:2.
Suggest why this ratio varies in different ionic compounds.
The ratio varies in different ionic compounds because different ionic compounds have different ratios of positive ions to negative ions.
How do lattices function?An ordered grid of points known as a lattice is used to visualize how crystallizing particles are structured. The unit cell of the crystal is defined by the lattice points. The smallest part of a crystal, known as a unit cell, is repeatedly translated in three dimensions to create the whole crystal.
The crystal structure (or crystal lattice) of an ionic compound is determined by the size of the ions and the stoichiometry (ratio of cations to anions) of the ions. Many ionic compounds have variations in this ratio.
A recurring three-dimensional pattern of atoms or groups of atoms in a crystal is known as a crystal lattice structure.
To learn more about lattice click on the link below:
https://brainly.com/question/4792664
#SPJ9
Question 19
How many hydrogen ions (protons; H-) would need to bond with the carbonate anion to create carbonic acid?
A. 1
B. 2
C. 3
D. 4
2 hydrogen ions (protons; H-) would need to bond with the carbonate anion to create carbonic acid.
In what bonds does carbonic acid consist?One carbon-oxygen double bond and two carbon-oxygen single bonds make up the structure of carbonic acid, as can be seen from the example given above. One hydrogen atom is joined to each of the oxygen atoms involved in a single bond with the carbon.
Do hydrogen bonds exist in carbonic acid?In the dimers of carbonic acid, bifurcated hydrogen bonds frequently occur, creating a complicated picture with several orbital interactions of different intensities. The lowest energy dimers are made up of two anti-anti monomers interacting through the strongest C=OH-O hydrogen bonds.
To know more about double bond :
https://brainly.com/question/16626126
#SPJ9
The preparation of isopentyl acetate by the method used in this experiment is an equilibrium reaction. Equilibrium must be shifted to the right-hand side because the reaction does not favor formation of the product. What method is used to accomplish this?.
The Fischer Esterification method is used to accomplish this preparation of isopentyl acetate.
The Fischer esterification is an alternative esterification mechanism that uses an equilibrium process. It is standard procedure to use an excess of one of the reactants, often alcohol or acid, to alter the equilibrium in a way that facilitates the synthesis of esters. Since acetic acid is less costly and more readily removed than alcohol, we will use a lot of it in the current procedure.
Another strategy to trigger a reaction to its products is to remove one of the products as it forms. In this experiment, we will completely remove the water produced in the reaction by directly adding silica beads to the reaction vessel and using a drying tube with a drying agent (calcium chloride), which forbids the entrance of moisture into the reaction.
Learn to know more about Fischer esterification on
https://brainly.com/question/24262393
#SPJ9
why would the secondary consumer decrease and the producer increase if the grasshopper was removed
Answer:
Explanation:
The grass hopper feeds on the plants so the secondary consumer lacking its food source would decrease as the producer increases with not predator.
Marcie fills a graduated cylinder with 15.0 mL of water (Vi). Paul finds the mass of a marble to be 2.21g, then drops the marble into the graduated cylinder. If the meniscus on the graduated cylinder is now at 16.3 mL (Vf), what is the density of the marble?
The density of the marble is 1.7kg/m³
Density is the amount of mass per unit of volume
Marcie fills a graduated cylinder with 15.0 mL of water (Vi) paul finds the mass of a marble to be 2.21g, then drops the marble into the graduated cylinder if the meniscus on the graduated cylinder is now at 16.3 mL (Vf)
We have to find density of the marble = ?
Volume = (Vi) - (Vf) = 15.0 mL - 16.3 mL
Volume = 1.3mL
Mass = 2.21g
Density = mass/volume means ρ = m/V
Density = 2.21g / 1.3mL
Density = 1.7kg/m³
The density of the marble is 1.7kg/m³
Know more about density
https://brainly.com/question/17970912
#SPJ1
what happens when an electric current is passed through a solution of an ionic compound
Whenever ionic chemicals are melted or dissolved in water, an electric current is produced. The B ions migrate toward the positive electrode in an ionic solution, while the A+ ions migrate toward the negative electrode.
Always dissociated, which means they are made up of independent cations (+) and anions, which are ionic compounds or salts (-). For instance, even in the solid state, there are just Na+ and Cl- ions in common salt, NaCl, and nothing that is "NaCl."
But the ions need to travel in order to conduct electricity. In the solid state, it is impossible to do this. Therefore, dry solid salts with no moisture at all are poor electrical conductors. The ions may travel, thus when they are in liquid form (melted) or solution (dissolved in water), they conduct electricity.
In other words, they conduct electricity because they are dissociated, not because electrical current is flowing through them.
Learn more about electric current at:
https://brainly.com/question/27003377
The density of silver is 10.5 g/cm3. What mass of silver would occupy a volume of 56.0 cm3?
Answer:
28 g
Explanation:
d = m/V
m = dV = 10.5 x 56.0 = 28 g
4. List the basic tenants of the Kinetic Molecular Theory.
Answer:
The five main postulates of the KMT are as follows: (1) the particles in a gas are in constant, random motion, (2) the combined volume of the particles is negligible, (3) the particles exert no forces on one another, (4) any collisions between the particles are completely elastic, and (5) the average kinetic energy of ...
Explanation:
You have 7 moles of H2O. How many particles are present?(Avogadro's Number is 6 x 10^23) a 4.2 x 10^23 b 4.2 x 10^24 c 4.2 d 42
Answer
b. 4.2 x 10²⁴
Explanation
Given:
Moles of H2O = 7 moles
Avogadro's Number is 6 x 10²³
What to find:
The number of articeles of H2O present in 7 moles of H2O.
Solution:
1 mole f any substanc contains 6 x 10²³ partcicles
Therefore 7 moles of H2O will contain
[tex]\frac{7\text{ }moles}{1\text{ }mole}\times6\times10^{23}\text{ }particles=4.2\times10^{24}\text{ }particles[/tex]The correct answer is option:
b. 4.2 x 10²⁴
During the determination of molar mass of co2 experiment, suppose you measure the atmospheric pressure of the lab as 752 torr and the temperature of the lab as 21°c. If the vapor pressure of water is 18. 65 torr at 21°c, what is the pressure, in atm, of the co2 collected?.
The pressure of the CO₂ collected in atm is 0.965 atm.
We need to know about pressure to solve this problem. Pressure is unit that describe how much force applied on a surface area. It can be determined as
P = F / A
where P is pressure, F is force and A is area.
From the question above, we know that
Pvapor = 18.65 torr
P = 752 torr
From partial pressure, we can conclude that
P = Pco₂ + P vapor
752 = Pco₂ + 18.65
Pco₂ = 752 - 18.65
Pco₂ = 733.35 torr
Convert to atm
Pco₂ = 733.35 torr
Pco₂ = 733.35/760 atm
Pco₂ = 0.965 atm
Find more on pressure at: https://brainly.com/question/25965960
#SPJ4
From the list below, which item is not part of beta decay?
OA. The nucleus of the atom is unstable.
B. An atom has many more electrons than protons.
C. A neutron turns into a proton.
D. An electron is ejected from the nucleus
Answer:
C
Explanation:
When Beta decay happens, the atomic number of an element goes up, and that means there is an extra proton. A is not the answer because unstable atoms cause decay. B is also not correct because this is what happens in Beta decay: a neutron becomes a proton. D is not correct because an electron is actually emitted from the nucleus.
Answer:
The correct answer is B. An atom has many fewer protons than neutrons.
I just took the test.
Explanation:
What rule can you state about the relationship between phase changes and heat energy?
The terms change of phase and change of state are synonymous. A change in phase is always accompanied by a change in heat. However, the temperature remains constant. When we heat a solid, the energy supplied is used to increase the kinetic energy of its molecules, resulting in an increase in temperature.
What happens to energy when the phases change?A system undergoing a phase change absorbs or releases energy. Energy changes are equal in magnitude but opposite in sign for systems undergoing complementary phase changes. The heat energy added during the phase change overcomes some of the forces that hold the molecules together, allowing them to move further apart. The added heat energy is stored as potential energy, or energy of position, during the phase change because the molecules are now further apart. A change in phase is always accompanied by a change in heat. However, the temperature remains constant. When we heat a solid, the energy supplied is used to increase the kinetic energy of its molecules, resulting in an increase in temperature.To learn more about phase changes, refer to:
https://brainly.com/question/25664350
#SPJ4
Can someone help me with level 17 of Covalent Bonds o the Collision app? This is the last one and it's urgent.
The covalent compounds formed from the given elements are as follows:
Water; H₂OCarbo (iv) oxide; CO₂, and Nitrogen trifluoride; NF₃What are covalent compounds?Covalent compounds are compounds that are formed as a result of covalent bonds formed between atoms of different elements.
Covalent bonds are formed as a result of sharing of electrons between atoms of different elements usually non-metals.
Due to differences between the electronegativities of atoms of nom-metals, the electrons shared in covalent compounds are not always shared equally. Thus, several other intermolecular forces exist between molecules of covalent compounds.
Some of the intermolecular forces that exist in covalent compounds include:
London Dispersion forcesDipole Dipole forcesHydrogen bondingGiven the following elements: nitrogen, fluorine, oxygen, carbon, and hydrogen.
The covalent compounds that can be formed representing the given intermolecular forces are as follows:
Water; H₂O - hydrogen bonding exists between water moleculesCarbo (iv) oxide; CO₂ - London dispersion forces are the major intermolecular forces present in carbo (iv) oxide given moleculesNitrogen trifluoride; NF₃ - dipole dipole forces predominate in nitrogen trifluoride molecules.
Learn more about covalent compounds at: https://brainly.com/question/3447218
#SPJ1
A block of steel occupies a volume of 15.0 mL and weighs 120.75 g. What is its density?
The density of a block of steel is:
8.05g/mL.
The mass of a substance per unit of volume is that the definition of density. though the sign may represent the Latin letter D, it's most often accustomed represent density. Mass divided by volume is however density is mathematically outlined.
The units of mass divided by volume accustomed live density embody grammes per cm cube (g/cm3) and kilogrammes per liter .
The equation for density is d = M/V, wherever d represents density, M is mass, and V is volume.
As a result, so as to calculate density, we tend to should divide mass by volume.
The mass is one hundred 20.75 and therefore the volume is 15.0 ml.
Divided by 120.75/15.0
8.05g/mL is the density.
To know more about density click at
https://brainly.com/question/7244058
Explain covalent bond?
Ostriches are mostly active during the day, so they should be classified as__________.
A)
crepuscular
B)
perennial
C)
diurnal
D)
nocturnal
E)
biurnal
Answer:
C
Explanation:
ostriches are classified as diurnal
Answer: The answer is diurnal!
Explanation: Nocturnal animals, such as the owl or bat, stay awake during the night and sleep during the day! Which for diurnal animals, they sleep during the night, and roam around during the day! Such as us humans are both because some people may work during the night and sleep during the day! The most common for humans is us sleeping at night though and awake during the day!
FeSO4(aq) + K3PO4 (aq) —>
K2CO3 (aq) + CdI2 (aq) —>
CaCo3 (aq) + HNO3 (aq) —>
An ionic equation is a chemical equation in which the electrolytes in aqueous solution are described as dissociated ions.
What is the difference between ionic equation and net ionic equation?A complete ionic equation also contains the spectator ions, whereas a net ionic equation just displays the chemical species that are involved in a reaction.A molecular formula has two or more atoms bonded together, whereas a chemical formula can only refer to one atom. They are both elements, and their chemical symbols are unchanged.An ionic equation is a chemical equation in which the electrolytes in aqueous solution are described as dissociated ions. It is similar to a molecular equation in that it expresses compounds as molecules.3FeSO4(aq) + 2K3PO4(aq) = Fe3(PO4)2(s) + 3K2SO4(aq)
ionic equation : 3Fe(2+)(aq) + 3SO4(2-)(aq)+ 6Na(+)(aq) + 2PO4 (3-) (aq) → Fe3(PO4)2(s)+ 6Na(+) + 3SO4(2-)(aq)
net ionic equation: 3Fe(2+)(aq) + 2PO4 (3-)(aq) → Fe3(PO4)2(s)
K2CO3(aq) + CdI2(aq) = 2KI(aq) + CdCO3(s)
net ionic equation for K2CO3(aq) + CdI2(aq) = 2KI(aq) + CdCO3(s).
2HNO3 + CaCO3 = Ca(NO3)2 + H2O + CO2
ionic equation : CaCO3(s) + 2H+(aq) → Ca2+(aq) + CO2(g) + H2O()
To learn more about : Ionic equation
Ref : https://brainly.com/question/19705645
#SPJ13
How many moles of cobalt atoms are in 29.4 grams of cobalt?
0.4988699069454786 Moles of cobalt atoms are in 29.4 grams of cobalt.
How to convert grams of cobalt into moles of cobalt ?In order to convert grams of cobalt into moles of cobalt :
n = m / M,
n - number of moles.
m in grams - specific mass.
M is the molar mass of this material.
n = 29.4 g / 58.933200 g/mol
n = 0.4988699069454786 moles
A mole is defined as 6.0221076 × [tex]10^{23}[/tex] of any chemical unit, be it atoms, molecules, ions or others. A mole is a convenient unit to use because any substance has a large number of atoms, molecules or otherwise.
To learn more about moles of cobalt , visit;
https://brainly.com/question/25506615
#SPJ13
get the average atomic mass of Candium from two other groups. What are at least 2 reasons why the average atomic mass of your Candium element that you calculated may not match the average atomic mass of any other lab?
The average atomic mass of your cadmium element is the mass and random errors in the measurement of mass and differences that arise from the nature of samples used for the experiment
The average atomic mass is the mass of the element that is obtained when you consider the masses of all the isotopes that are found in the element as well as the percentage abundance of each of the isotopes and the isotope percentages in each of the samples would not be the same and this means that the results that each group would obtain would slightly differ from each other
Know more about average atomic mass
https://brainly.com/question/28831519
#SPJ1
HELP WILL GIVE BRAINLIST
A student measures the density of a piece of plastic to be 0.90 g/ml. However, the accepted value for the density of that type of plastic is 1.1 g/ml. What is the percent error in her measurements?
Answer: The density of a substances is generally known as mass per unit volume. And The SI unit is Kg/m3. Mass Versus Weight: Always there is confusion in people between mass and weight. Actually, the mass of an object is referred to its weight. In the scientific concepts mass refers loosely to the amount of matter in an object.
Explanation:
if 100 mg of ferrocene is reacted with 75 mg of anhydrous aluminum chloride and 40 microliters of acetyl chloride and 100 mg of product is isolated, what is the percent yield assuming the product is only mono acetylferrocene? answer with just the number and no % sign.
Fe(C 5H 5) 2 describes the organometallic compound ferrocene. The molecule is a complex made up of a core iron atom and two cyclopentadienyl rings.
AlCl3 is the chemical formula for aluminum chloride, sometimes referred to as aluminum trichloride.
Acetic acid is the source of the acyl chloride known as acetyl chloride. AcCl is a frequent way to shorten its formula.
"81.3%"
One mole of ferrocene combines with one mole of acetyl chloride in accordance with the reaction's stoichiometry to produce one mole of mono acetylferrocene.
The limiting reagent is the one that is minimally present. Ferrocene is the limiting agent as a result.
The limiting reagent controls how the product is formed. So,
In a reaction, one mole of ferrocene yields one mole of mono acetylferrocene.
reaction forms with 0.0005375 moles of ferrocene Mono acetylferrocene, 0.0005375 mole
0.0005375 moles of product were produced.
Mono acetylferrocene's molar mass is 228.07 g/mole.
Produced mono acetylferrocene mass equals moles times molecular weight, or 0.0005375 x 228.07 g, or 0.123 grammes, or 123 mg.
assuming a 100 mg experimental yield
% yield is equal to (Experimental Yield / Theoretical Yield) / 100, which equals (100/ 123) / 100, or 81.3%.
To know more about mono acetylferrocene, click on the link below:
https://brainly.com/question/14211561
#SPJ9
the chemical formula for an ionic compound represents the group of answer choices number of ions in each molecule. total number of ions in the crystal lattice. number of atoms in each molecule. ratio of the combined ions present in a sample.
The chemical formula for an ionic compound represents the ratio of the combined ions present in a sample.
A sample of an ionic compound doesn't represent a multiple of distinct molecules, like a sample of a covalent compound, where the chemical formula does represent the number of atoms in a single, differentiated molecule. Ionic compounds form crystal lattices where each positively charged cation is surrounded by negatively charged anions and vice versa. Thus, the chemical formula of an ionic compound merely describes the ratio of cations and anions present in the crystal lattice.
The total number of ions in the lattice can, on the other hand, be calculated using the mass of the sample and Avogadro's number.
You can learn more about ionic compounds here:
brainly.com/question/9167977
#SPJ4
please explain why and reason
Answer:
I think the right answer was "because they have already formed bonds to become more stable"
Explanation:
the reason you got the question wrong was because not all unstable elements have to be bonded with a gas molecule. It could be a metal for example.
it's hard to find these unstable elements in natural nature because since they are so unstable, they can't "wait" so they form bonds as soon as they can when they get the chance.
nature isn't controlled by scientists too, so these unstable elements form bonds with almost anything possible when they have the chance to become more stable
A 1.0 m solution of HC1 in benzene has a freezing point of 0.4 °C. Is HC1 an electrolyte in benzene? Explain.
Based on the freezing point depression value of HCl in benzene, HCl does not act as an electrolyte in benzene.
What is the effect of solute on the freezing point of a solvent?The freezing point of a solvent such as water is lowered by the solute which ionizes in it.
The freezing point of a solution depends on the number of particles in the solution.
The formula for freezing point depression is given below:
ΔTf = i * Kf * m
HCl remains as molecules and does not ionize in a solution of Benzene. This is because benzene is a nonpolar solvent.
Therefore, the equation for the dissolution of HCl in benzene is given below:
HCl (g) → HCl (in benzene solution)
1 mol of HCl gas gives 1 mol of HCl molecules in solution.
Therefore, HCl remains a molecule and does not act as an electrolyte in benzene.
Learn more about freezing point depression at: https://brainly.com/question/24314907
#SPJ1
A gas has a volume of 6 L when its temperature is 300 K. What will the gas's new volume be if the temperature is reduced to 200 K?
The volume of fuel is 6 liters and the temperature is about 300 degrees. Gasoline laws relate to volume, strain, temperature, and amount of fuel. New fuel volume when the temperature drops to 200 ok: the old way to fine-tune gasoline. 273 ok (0°C) and pressure 1.00 atm.
Temperature is a measure of hot or cold expressed in many scales, including Fahrenheit and Celsius. Temperature indicates the route wherein heat energy will spontaneously waft—i.e., from a hotter body (one at a better temperature) to a colder frame (one at a decreased temperature). warmness is the overall energy of the motion of the molecules of a substance, while temperature refers back to the measure of the average energy of the motions of the molecules inside the substance.
Temperature is just a size that shows the average kinetic strength of one atom or molecule. hence, whilst we say something is hot or bloodless, we're normally using some other reference factor to outline the hotness and coldness of a frame. A thermometer is a tool that measures temperature. it can measure the temperature of a stable along with food, a liquid inclusive of water, or fuel along with air.
Learn more about Temperature here:
https://brainly.com/question/24746268
#SPJ1
Is milk going sour caused by heating
Answer:
Both are chemical changes and both are physical changes.
Explanation:
Milk can go sour in the fridge and I don't really know about the conserve mass one.
the atmospheric concentration of carbon dioxide increased from 278 ppm in 1790 to 383 ppm in 2007. what is the approximate percent increase in carbon dioxide concentration from 1790 to 2007?
The approximate percent increase in carbon dioxide concentration =38%
How do we measure the CO2 content of the atmosphere?For this reason, researchers regularly take air samples at several distant locations across the globe, including one atop the Hawaiian volcano Mauna Loa, to gauge the average concentration of CO2 in the atmosphere. Since the 1950s, this website has monitored the atmospheric concentration of carbon dioxide.
Percentage increase = (Increase/original value)×100
P.I.C= (ΔC/C₁)×100 ⇒ Equation 1
Where P.I.C = Percentage increase in the concentration of carbon dioxide from 1790 to 2007,
ΔC = increase in the concentration of carbon dioxide from 1790 to 2007,
C₁ = concentration of carbon dioxide in 1790.
But,
ΔC = C₂ - C₁ ⇒Equation 2
Substituting equation 2 into equation 1.
P.I.C = [(C₂ - C₁)/C₁]×100⇒Equation 2
Given: C₁ = 278 ppm, C₂ = 383 ppm
Substituting into equation 2
P.I.C = [(383-278)/278]×100
P.I.C = (105/278)×100
P.I.C = 37.77%
P.I.C ≈ 38%
The approximate percent increase in carbon dioxide concentration =38%
To know more about atmospheric concentration visit:
https://brainly.com/question/3469446
#SPJ9
which of the following is a derived unit (a) kg ( b) meter ( c) kelvin ( d ) newton
Among the given options, the derived unit is Newton. Option d is correct.
Derived units are measure units that have been derived from more than one base unit. Also understood as the units derived from the fundamental units. They either lack dimension or are the products of base units, like derived unit of force is Newton. A total of 22 derived units exist. The basic 7 derived units are Length is meter(m), Mass is kg (kilogram) ,Time is s (second), Electric Current is A (Ampere) ,Thermodynamic Temperature is K (degrees Kelvin) ,Amount of Substance is mol (mole) and Luminous Intensity is cd (candela)
Learn more about Derived units here https://brainly.com/question/4950932
How many mols of sodium are present in 6.7 grams of sodium?
The answer is 22.98977. We assume you are converting between grams Na and mole.