The answer is C) kilogram
The SI unit in the given options is kilogram, the correct option is C.
What is SI unit?The most common unit of measurement is the standard unit. These units are standardized, which means that everyone understands an object's size, weight, and other properties.
Standard Units of Measurement have fixed values that cannot be changed.
The International System of Units, abbreviated SI in all languages and sometimes pleonastically as the SI system, is the modern version of the metric system and the world's most widely used measurement system.
The SI is a coherent system of units of measurement that begins with seven base units: the second (symbol s, the unit of time), the metre (m, length), the kilogram (kg, mass), the ampere (A, electric current), and so on.
Thus, the correct option is C.
For more details regarding SI units, visit:
https://brainly.com/question/12750330
#SPJ2
tell types of instruments
Answer:
Instrument Use
Accelerometer Measures acceleration
Altimeter Measures altitude of an aircraft
Ammeter Measures electric current in ampere
Anemometer Measures wind speed
two billiard balls moving along the same line hit each other head-on. each has a mass of 0.220 kg; one has an initial velocity of 1.84 m/s, the other an initial velocity of 0.530 m/s. if the collision is elastic, what are their final velocities? ignore friction.
Hi there!
Since the collision is elastic, we must also satisfy the following condition:
Ei = Ef, or:
KEi = KEf
Begin by writing an expression for momentum. (p = mv) Remember that one ball's direction is negative; in this instance, we can let the second ball be moving LEFT.
mv1 + mv2 = mvf1 + mvf2
0.220(1.84) + 0.220(-.530) = 0.220(vf1 + vf2)
0.2882/0.220 = vf1 + vf2
1.31 = vf1 + vf2
Now, we can express this as a conservation of energy:
1/2mv1² + 1/2mv2² = 1/2mvf1² + 1/2mvf2²
Plug in values and simplify:
0.403315 = 1/2m(vf1² + vf2²)
Simplify further:
3.6665 = vf1² + vf2²
Use the equation derived from momentum above and solve for one variable:
vf2 = 1.31 - vf1
Plug in this expression for vf2:
3.6665 = vf1² + (1.31 - vf1)²
Expand:
3.6665 = vf1² + 1.7161 - 2.62vf1 + vf1²
Simplify:
1.9504 = -2.62vf1 + 2vf1²
Solve for vf1 using a graphing calculator:
vf1 = -0.53 m/s or 1.84 m/s; we must figure out which one is correct.
Since v1 is heading to the right initially with a velocity of 1.84 m/s, we know that the ball's velocity could not have stayed the same in both magnitude and direction, so the final velocity must be -0.53 m/s.
Now, we can solve for the velocity of the other ball (initial of 0.53 m/s):
vf2 = 1.31 - (-0.53) = 1.84 m/s.
Now, you could have also made the connection that when two balls of the SAME MASS experience an ELASTIC collision, the velocities are simply "exchanged" from one to another. I just used this more "extensive" method to prove this.
A 100 N crate is being pulled at a constant velocity by a rope a 30 degrees to the horizontalas depicted in the diagramFind the force of friction Show your work and explain your reasoning in two to sentences
Answer:
Explanation:
As the velocity is constant, Net force is zero. This means that the friction force must equal the applied force in the horizontal direction.
Ff = Fcosθ
if we had a coefficient of kinetic friction μ, we could quantify the friction force more precisely.
μN = Fcosθ
μ(mg - Fsinθ) = Fcosθ
μmg = Fcosθ + μFsinθ
100μ = F(cos30 + μsin30)
F = 100μ / (cos30 + ½μ)
Ff = 100μcos30 / (cos30 + ½μ)
A 100 N create is being pulled at a constant velocity by a rope a 30 degrees to the horizontal as depicted in the diagram given in question the force of friction Ff = 100μcos30 / (cos30 + ½μ).
What is force?
A force in physics is an effect that has the power to alter an object's motion. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.
As the velocity is constant, Net force is zero. This means that the friction force must equal the applied force in the horizontal direction.
Ff = Fcosθ
if we had a coefficient of kinetic friction μ, we could quantify the friction force more precisely.
μN = Fcosθ
μ(mg - Fsinθ) = Fcosθ
μmg = Fcosθ + μFsinθ
100μ = F(cos30 + μsin30)
F = 100μ / (cos30 + ½μ)
Ff = 100μcos30 / (cos30 + ½μ)
the force of friction Ff, is 100μcos30 / (cos30 + ½μ).
To learn more about force refer to the link:
brainly.com/question/13191643
#SPJ5
One of the great challenges of cosmology today is to ---
A
determine the amount of matter in the Universe
B
find intelligent signals emanating from outer space
С
look backward in time to before the Big Bang
D
locate wormholes to help define the structure of the Universe
Answer:
Steady-state theory, in cosmology, a view that the universe is always expanding but maintaining a constant average density, with matter being continuously created to form new stars and galaxies at the same rate that old ones become unobservable as a consequence of their increasing distance and velocity of recession.
Cosmic inflation is a faster-than-light expansion of the universe that spawned many others. ... Cosmic inflation solves these problems at a stroke. In its earliest instants, the universe expanded faster than light (light's speed limit only applies to things within the universe).
E TRUE OR FALSE: Write the word TRUE if the statement is correct, and FALSE if it is not. (3 points each). Write your answer on a separate sheet of paper. 1. Most EM waves has the same speed. 2. EM waves travel at the speed of 4x108 m/s. 3. Electromagnetic waves are transverse waves consisting of changing electric fields and changing magnetic fields. 4. Electromagnetic waves transfer energy through a vacuum. 5. A wave is a disturbance that transfers energy .what the answer?
Answer:
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
Explanation:
1. Most EM waves has the same speed. True
2. EM waves travel at the speed of 4x108 m/s. False
3. Electromagnetic waves are transverse waves consisting of changing electric fields and changing magnetic fields. True
4. Electromagnetic waves transfer energy through a vacuum. True
5. A wave is a disturbance that transfers energy. True
A flywheel with a diameter of 0.692 m is rotating at an angular speed of 208 rev/min. (a) What is the angular speed of the flywheel in radians per second
[tex]\omega = 21.8\:\text{rad/s}[/tex]
Explanation:
We know that there are [tex]2\pi[/tex] radians in one revolution and 60 seconds in one minute so we can easily convert the rev/min unit to rad/s using the following conversion factors:
[tex]208\:\dfrac{\text{rev}}{\text{min}}×\dfrac{2\pi\:\text{rad}}{1\:\text{rev}}×\dfrac{1\:\text{min}}{60\:\text{s}}[/tex]
[tex]\;\;\;\;\;=21.8\:\text{rad/s}[/tex]
what two things make up an ionic bond?
What is the meaning of eddy currents in electromagnetic series?
Answer:
currents which circulate in conductors like swirling eddies in a stream in electromagnetic series....
I need the answer fast for c pleaseeee
Answer:
F = - K x for spring (note that that F here is given in grams, F = m g is correct)
K here is 100 g / cm for the spring constant
x = -420 g / 100 g/cm = -4.2 cm
The spring would compress 4.2 cm for a total length of 20 - 4.2 = 15.8
d) to compress the spring 6.8 cm one can see that the load would be 680 g
Can anyone help me with question 10 a.
Answer:
it's ahfdfhhh hhgfdjjjjuyggffdddcff
A. praised
B. scolded
C. rewarded
14. Reicon's parents admonished him for breaking their antique collection,
D. silenced
15. I am an advocate of anti-corruption movement in the country.
D. supporter
C. enemy
DirectioRead the statements below. Using context clues, identify the meaning
A. opponent
B. primer
highlighted words.
16. The hotel abolishes its rice-all-you-can policy to avoid wastage of food.
b. removes
d. proposes
A. continues
17. The country has a very tropical climate where it only has dry and wet
seasons similar to other countries in Southeast Asia
a. humid
b. cold
d. normal
-
c. comfortable
d. collected
a. new
c. outdated
18. The obsolete books and other references in the library resulted to the
removal in the shelves and inventory.
b. old
19. Beverages, such as juices, milk, beers and sodas, have increased in
,
due to low supply and importation issues.
a. drinks b. food
d. pastas
20. The luxurious life of my cousin in an exclusive subdivision in Ta
makes me inspired to dream and work hard for me to escape this unp
d.
a. ordinary b. fantastic
c. uncomfortable
c. bread
Help help me plis po summative test ko po ito plis help me
Answer:
14. scolded
15. supporter
16. i am not sure but I think it is removes
17. comfortable
18. outdated
19. drink
20. it can be fantastic or wealthy
Answer:
14. Reicon's parents admonished him for breaking their antique collection,
scolded15. I am an advocate of anti-corruption movement in the country.
supporter16. The hotel abolishes its rice-all-you-can policy to avoid wastage of food.
it is removes17. The country has a very tropical climate where it only has dry and wet
seasons similar to other countries in Southeast Asia
comfortable18. The obsolete books and other references in the library resulted to the
removal in the shelves and inventory.
outdated19. Beverages, such as juices, milk, beers and sodas, have increased in,due to low supply and importation issues.
drinks20. The luxurious life of my cousin in an exclusive subdivision in Ta makes me inspired to dream and work hard for me to escape this unp.
fantasticThis is two or more elements chemically combined in a fixed ratio.
Example: water, carbon dioxide, sodium chloride
A solar collector for a hot water system absorbs solar radiation at the rate of 660 W/m^2
. Its collecting area is 3.8m^2 . Cold water at 15degrees enters the collector. What volume of
water per minute at an output temperature of 60 degrees can this collector deliver?
This question involves the concepts of the law of conservation of energy and specific heat capacity.
This collector can deliver "7.96 x 10⁻⁴ m³/min" of water at an output temperature of 60°C.
According to the law of conservation of energy:
Solar Energy = Energy Required to raise the temperature of the water
Solar Power = Energy Required to raise the temperature of the water
[tex]IA=\frac{mC\Delta T}{t}\\\\\frac{m}{t}=\frac{IA}{C\Delta}[/tex]
where,
[tex]\frac{m}{t}[/tex] = mass flow rate = ?
I = solar radiation = 660 W/m²
A = Area = 3.8 m²
ΔT = change in temperature = 60°C - 15°C = 45°C
C = specific heat capacity = 4200 J/kg.°C
Therefore,
[tex]\frac{m}{t}=\frac{(660\ W/m^2)(3.8\ m^2)}{(4200\ J/kg.^oC)(45^oC)}\\\\\frac{m}{t}=(0.0133\ kg/s)(\frac{60\ s}{1\ min})\\\\\frac{m}{t}=0.796\ kg/min[/tex]
Now, the volume flow rate will be:
[tex]\frac{V}{t}=\frac{(\frac{m}{t})}{(density\ of\ water)}=\frac{(0.796\ kg/min)}{(1000\ kg/m^3)}\\\\\frac{V}{t}=7.96\ x\ 10^{-4}\ m^3/min[/tex]
Learn more about the law of conservation of energy here:
brainly.com/question/20971995?referrer=searchResults
The attached picture explains the law of conservation of energy.
Which item is not a solid-state component?
an integrated circuit
a vacuum tube
a diode
a transistor
Answer:
a vacuum tube is NOT a solid state component
This question has two parts. First, answer part A. Then, answer part B. Part A: Which statement best summarizes the theme of the text? O A. You do not always recognize what is most valuable. O B. Keep your friends close, but your enemies closer. W O C. Fine possessions do not make a fine person. h 0 D. The best things come in small packages. Part B: Which evidence from the text best supports your answer in part A? O A. "The other animals of the forest bowed to him, and they often spoke of his antlers with admiration." B. "The Stag was so engrossed that he did not notice that a Lion had crept up alongside him." C. ". . . but the branches of some of the trees hung low, and vines curled around them." D. "The long legs that I hated would have saved me, but the antlers that I loved have led to my destruction!"
Answer: for part A Its A the ANSWER for part B its D
Explanation:
Answer:
a and b
Explanation:
A clothes dryer in a home draws a current of 10 amps when connected on a special 220-volts household circuit.what is the resistance of the dryer?
Answer:
22Ω
Explanation:
if V ⇒ voltage
I ⇒ current
R ⇒ resistance
V = IR
220 = 10 x R
220 / 10 = R
22 = R
I need your help with this question, it’s my final exam for physics
Answer:
●Bx=Bcos40
Bx=10 × 0.76
Bx=7.6
●By=Bsin40
By=10×0.64
By=6.4
Hope it will help you.
A magnesium ion has a charge of +2 and an oxygen ion has a charge of –2. What is the chemical formula of the compound made of these ions? (correct answer gets brainliest)
A) Mg2O2
B) MgO
C) MgO2
D) Mg2O
According to the table what was the hikers total displacement the graph has 4km 6km 4km 6km
Answer:
0
Explanation:
0 is the answer
plz answer the question.
Answer:
A. Determine the equation of constraints
Help pls!
A 3 kg mass is raised a distance of 14 m above the earth by a vertical force of 93 N.
The final kinetic energy of the mass, to 3 significant figures, if it was originally at rest is:
[tex] \large★·.·´¯`·.·★ {Answer}★·.·´¯`·.·★[/tex]
As we know that Kinetic Energy is the Energy that is possessed by a moving object. and if the object is at rest then it doesn't have velocity therefore there is no kinetic Energy.
In the numerical terms we can express it as : -
[tex] \sf0.00 \: \: joules[/tex][tex]꧁ \: \large \frak{Eternal \: Being } \: ꧂[/tex]
A 5kg mass is pushed with a force of 10N for a distance of 2.5 meters. The work done is
W = 25 J
Explanation:
Work done on an object is defined as
[tex]W = Fd = (10\:\text{N})(2.5\:\text{m}) = 25\:\text{J}[/tex]
what is the velocity of this graph between points a and b? 0.0m/s 2.5m/s 5.0m/s 6.0m/s?
Answer:
Pick c is the right one
Explanation:
5.0m/s
A 1300 watt hair blow dyer is designed to operate on 120 Volts. How much current does the dryer require
Answer:
10.83 Amperes
Explanation:
if A ⇒ current
W = VA
1300 = 120 x A
1300 / 120 = A
10.83 = A
Nikolai is using a hand-operated grain mill to grind wheatberries into flour. The mill is operated by spinning a fly-wheel with radiusR= 23 cm, which has a handle attachedto the outer edge. After grinding for a few minutes at a con-stant angular speedωi, he lets go of the handle and allows themechanism to come to rest as it undergoes constant angularacceleration. This happens over the course oft= 0.50 s, andthe flywheel undergoes a quarter of a rotation during this time.What is the linear tangential accelerationaof the handle as itcomes to rest? For the limits check, investigate what happenstoaas the time required to stop the flywheel becomes small(t→0).
Answer:
Explanation:
α = Δω/t = (0 - ωi)/0.50 = -2ωi rad/s²
ωf² = ωi² + 2αθ
θ = (ωf² - ωi²) / 2α
2π/4 = (0² - ωi²) / (2(-2ωi))
2π/4 = ωi / 4
ωi = 2π rad/s
α = -2(2π) = -4π rad/s²
a = rα = 0.23(-4π) = 0.92π m/s² ≈ -2.89 m/s²
as the time to stop approaches zero, acceleration goes toward infinity.
A 0.50-kg mass is attached to a spring of spring constant 20 N/m along a horizontal, frictionless surface. The object oscillates in simple harmonic motion and has a speed of 1.5 m/s at the equilibrium position. What is the total energy of the system?
Hi there!
With the work-energy theorem for oscillating springs:
ME = KE + PE
[tex]ME = \frac{1}{2}mv^2 + \frac{1}{2}kx^2[/tex]
Where:
m = mass (kg)
v = velocity (m/s)
k = Spring Constant (N/m)
x = displacement from equilibrium (m)
If the object is at the equilibrium position, there is NO potential energy since:
[tex]\frac{1}{2}k(0^2) = 0 J[/tex]
Thus:
[tex]ME = \frac{1}{2}mv^2[/tex]
Plug in the given values:
[tex]ME = \frac{1}{2}(0.50)(1.5^2) = \boxed{0.5625 \text{ J}}[/tex]
Water has higher specific heat than aluminum. This is all what you should know to answer following questions. An aluminum rod of mass 1 kg at temperature of 80^0C is placed into 1l of water of temperature 10^0C . there is no heat exchange with surroundings. Which material experiences greater change in temperature while system is reaching the thermal equilibrium
Answer:
The Aluminum
Explanation:
With a larger specific heat, water requires more heat to raise its temperature by a temperature degree.
In this system, with equal masses of water and aluminum, the heat moving from the aluminum lowering its temperature by one degree is not sufficient to raise the water temperature by one degree.
PLEASE HELP!
A 9kg particle is initially at rest at x=0. It is subject to a single force Fx (N) which varies with x (m) as shown in the
diagram
F
2
1
0
ББ by
x
- 1
1
-2
The kinetic energy of the particle when it is at x = 3 m is:
Hi there!
With a Force/Displacement curve, we must take the integral (area underneath the curve) to calculate the work done.
We know that:
W = ΔKE
Calculate the work by finding the area underneath the force curve from
x = 0 to 3 m:
We can use a trapezoid:
A = 1/2(3 + 2)(3) = 7.5 J
This is the amount of work done, and since the object starts from rest:
7.5J = KEf - KEi (0 J)
7.5J = KEf = 7.5 J
If the voltage across a 5-F capacitor is 2*e^-3
V find the current and the power
A car travelling at 79.3 Km/h on a highway has 4.22x10 5 J of kinetic energy.
a. What is the mass of the car?
b. If brakes are applied with a force of 2100 N, what distance will it take for the car to slow down to a speed of 56 Km/h?
Answer:
[tex]1.74\times10^3 kg; 100m[/tex]
Explanation:
Step a: mass of the car. Let's grab the definition of kinetic energy: [tex]K= \frac12 mv^2[/tex]. We have K, we have v (which we should convert in meters per second, dividing by 3.6) to get:[tex]4.22\times10^5 = \frac12m(22.03)^2 \rightarrow m= 2\times4.22 / 495.22 \times 10^5 = 1.74 \times 10^3 kg[/tex]
Point a is done.
Now for the (b)reaking part. (I'm sorry, it's an horrible joke, but I couldn't resist)
In theory we have the mass, we have the force, so we could find the acceleration, find how long it takes to slow down, and then find the distance traveled. Too long. Let's do things more easily: when the car slows down to 56 km/h it will have a different kinetic energy. The difference in kinetic energy is the work done by the breaking force ofer the slowing distance.
[tex]K_f-K_i=W[/tex] A quick note on signs: if you look carefully the final kinetic energy will be less than the initial value, thus the work will be negative: it means it's correct, since the work is against the motion, slowing it down. Let's get calculating, first by converting 56 kmh in m/s (15,56 m/s), then finding the final kinetic energy:
[tex]K_f =\frac12 (1.74\times10^3) (15.56)^2 =2.11 \times 10^5 J[/tex]
The difference will be the work done by the force, or
[tex](2.11 - 4.22) \times 10^5 = \vec F\cdot \vec x=Fx[/tex] where we are assuming that force and displacement have the same line of actions to simplify the dot product.
[tex]2.11\times 10^5 = 2100x = 1.00\times 10^2 m[/tex]