Which of the following is the equation for acceleration?

The density of the liquid will be equal to   [tex]\rho=0.892 \ \dfrac{g}{cm^3}[/tex]

The density of an object is defined as the ratio of the mass of an object to the volume of the object.

Volume of tube = 2^2 * pi * 30 = 377 cm^3

Volume of tube submerged = 25* 377 / 30 = 314 cm^3

Buoyancy = weight of liquid displaced

Volume of liquid displaced = 314 cm^3

Mass of tube and lead = 250 + 30 = 280 g

Now from the mass density by definition

[tex]\rho = \dfrac{m}{v}[/tex]

[tex]m=\rho \times v[/tex]

Mass of liquid displaced = Mass being supported

[tex]314 \times \rho = 280 g[/tex]

[tex]\rho= \dfrac{280}{ 314 } = .892 \frac{g}{cm^3}[/tex]

Thus the density of the liquid will be equal to   [tex]\rho=0.892 \ \dfrac{g}{cm^3}[/tex]

To know more about density follow

https://brainly.com/question/6838128

The density of the liquid is 1.67 g/[tex]cm^3[/tex].

The volume of the tube is

30 * 4 * 3.14 * 0.25 = 94.2 [tex]cm^3[/tex].

The mass of the lead pellets and the plastic tube is

30 + 250 = 280 g.

The volume of the lead pellets is

250 / 11.34 = 22 [tex]cm^3[/tex].

The volume of the liquid that the tube displaces is

94.2 - 22 = 72 [tex]cm^3[/tex].

The density of the liquid is

280 / 72 = 1.67 g/ [tex]cm^3[/tex].

Therefore, the density of the liquid is 1.67 g/ [tex]cm^3[/tex].

To know more about density here

https://brainly.com/question/29775886

#SPJ3

Calorimetry :

the process of measuring the amount of heat released or absorbed during a chemical reaction.

Calorimeter :

device for measuring the heat developed during a mechanical, electrical, or chemical reaction, and for calculating the heat capacity of materials.

Answer:

v² = u² + 2gh

8.9² = 0² + 2(9.8)h

h = 4.0 m

v = at

t = 8.9/9.8

t = 0.91 s

Answer:

Chronic Condition or Long-term Illness

Explanation:

They can also be known as Chronic Conditions or Long-Term Illnesses, hope this helps.

Answer:

Chronic condition, also called long-term condition.

Explanation:

Answer:

Explanation:

7a) t = d/v = 100/45cos14.5 = 2.29533...= 2.30 s

7b) h = ½(9.81)(2.29533/2)² = 6.46056... = 6.45 m

  or

  h = (45sin14.5)² / (2(9.81)) = 6.47 m

which rounds to the same 6.5 m when limiting to the two significant digits of the initial velocity.

Answer:

1. 3 N

2. The total force being put on the car by the men is 943 while the friction is going in the opposite direction with a force of 940.

3. Yes

4. The net force is not equal to zero

Explanation:

1. 345 + 203 + 291 + 101 = 943 + -940 = 3

Answer:

Q1. A measurable extent of a particular kind, such as length, breadth, depth, or height.

Q2. A dimensional constant is a physical quantity that has dimensions and has a fixed value. Some of the examples of the dimensional constant are Planck's constant, gravitational constant, and so on.

Q3. Physical quantities which posses dimensions and have variable are called dimensional variables. Examples are length, velocity, and acceleration etc.

Q4. Dimensionless variables are the quantities which doesn't have any dimensions the the value is a variable. Eg: angle = arc/ radius. Dimensions = L/L. = 1. So angle does not have any dimensions and the value can vary.

Q5. Principle of Homogeneity states that dimensions of each of the terms of a dimensional equation on both sides should be the same. This principle is helpful because it helps us convert the units from one form to another.

Q6. Dimensional analysis has been around a long time, Newton called it the "Great principle of Similitude", but the modern form can be traced back to James Clerk Maxwell. It was Maxwell who distinguished mass [A/], length [£], and time [7"] as the independent dimensions from which others could be derived.

Q7. Mass, length, time, temperature, electric current, amount of light, and amount of matter.

Q8. Dimensional analysis is used to convert the value of a physical quantity from one system of units to another system of units. Dimensional analysis is used to represent the nature of physical quantity. The expressions of dimensions can be manipulated as algebraic quantities.

Hope that helps. x

Answer:

13.5

Explanation:

Mass: 5kg

Initial Velocity: -15

Final Velocity: 12

Force: 10

We can use the equation: Vf = Vi + at

We need to find acceleration, and we can use the equation, F=ma,

We have mass and the force so it would look like this, 10=5a, and 5 times 2 would equal 10, so acceleration would be 2.

Now we have all the variables to find time.

Back to Vf = Vi + at, plug the numbers in, 12 = -15 + 2(t)

Plugging them in into desmos gives 13.5 for time.

Answer:

The axis is tilted and points to the North Star no matter where Earth is in its orbit. Because of this, the distribution of the Sun's rays changes. ... It also means that the angle at which sunlight strikes different parts of Earth's surface changes through the year.

Explanation:

Pls sub to bdoggaming if this helped

Answer:

[tex]47 \ \frac{m}{s}[/tex]

Explanation:

s = displacement (m)

u = initial velocity [tex](\frac{m}{s})[/tex]

v = final velocity [tex](\frac{m}{s})[/tex]

a = acceleration [tex](\frac{m}{s^{2} })[/tex]

t = time (s)

s = 235

a = -4.7

v = 0

v² = u² + 2as

(0)² = u² + 2(-4.7)(235)

u² - 2209 = 0

u² = 2209

u = 47

Answer:

[tex]\boxed {\boxed {\sf 47 \ m/s}}[/tex]

Explanation:

We are asked to find the initial velocity of the car before it began to accelerate.

We are given the acceleration, distance, and final velocity, so we will use the following kinematic equation:

[tex]{v_f}^2 = {v_i}^2 + 2ad[/tex]

The car's acceleration is -4.7 meters per second square. It traveled a distance of 235 meters. It came to rest, or a final velocity of 0 meters per second.

Substitute the values into the formula.

[tex](0 \ m/s)^2 = {v_i}^2 + 2 (-4.7 \ m/s^2)(235 \ m)[/tex]

[tex]0 = {v_i}^2 + 2 (-4.7 \ m/s^2)(235 \ m)[/tex]

Multiply the numbers in parentheses.

[tex]0= {v_i}^2 + (-2209 \ m^2 / s^2)[/tex]

Add -2209 to both sides of the equation.

[tex]0+ 2209 \ m^2 /s^2 = {v_i}^2+ ( -2209 \ m^2 /s^2 )+ 2209 \ m^2 /s^2[/tex]

[tex]2209 \ m^2 /s^2 = {v_i}^2[/tex]

Take the square root of both sides.

[tex]\sqrt {2209 \ m^2 /s^2} = \sqrt {{v_i}^2[/tex]

[tex]\sqrt {2209 \ m^2 /s^2} = v_i[/tex]

[tex]47 \ m/s = v_i[/tex]

The inital velocity of the car was 47 meters per second.

Answer:

no

Explanation:

u flipped it i cant see

All metals are solid at (our) living temperatures except for mercury which is a liquid. Metals are shiny for a while at least when properly finished. Metals are good conductors of both heat and electricity. This is due to the excess electrons in their valence clouds that facilitate energy transfer.What are 5 characteristics of metal?

Metals are lustrous, malleable, ductile, good conductors of heat and electricity

Silver conducts electricity better than any other metal.

Brass is an alloy made from zinc and copper.

Pure gold is too soft for many things so most gold is combined with other metals to make it stronger. ...

World time periods are often listed by the metal used.

Answer:

Id say beat it with a hammer and light it on fire. Then if it doesn't work, sacrifice it.

Explanation:

The statement that describes the motion of a block while it is in equilibrium is: The block moves at a constant speed.

A state of equilibrium in physics refers to a state of rest or the forces exerted on the object is in a balanced state.

In dynamic equilibrium, the acceleration of a body is zero. This means that the body is moving at a uniform speed.

Therefore, the statement that describes the motion of a block while it is in equilibrium is: The block moves at a constant speed.

Learn more about equilibrium at: https://brainly.com/question/13524990

0.8 seconds

Explanation:

time of flight = 2u/g

u=4m/s

g=10

= 8/10

= 0.8 sec

just a trial...not sure!!!

Given :

∅ = 60⁰

u = 4 m/s

g = 10m/s²

to find :

T = ?

Solution :

as per formula,

[tex]t = \frac{2u \: sin \theta}{g} [/tex]

now put the value : [tex]t \: = \frac{2 \times 4 \times sin \: 60}{10} [/tex]

as we know [tex] sin60 \: = \frac{ \sqrt{3} }{2} [/tex]

therefore,

[tex]t \: = \frac{8 \times \frac{ \sqrt{3} }{2} }{10} [/tex]

as we solve this we get,

[tex]t \: = \frac{ 2\sqrt{3} }{5} [/tex]

that's t = 0.69 sec

[tex]\sf\fbox\red{\:I \:hope \:it's \:helpful \:to \:you}[/tex]

Explanation:

12N by first law of newton is net force after colloision

Answer:

Explanation:

Answer:

The one falling from the greatest height will have the greatest speed.

h = 1/2 g t^2        time for ball to fall distance h

h2 / h1 = t2^2 / t1^2       dividing equations

h2 / t2^2 = h1 / t1^2

Let v be the average speed (v2 = h2 / t2)

1 / t2 * v2 = 1 / t1 * v1

v2 / v1 = t2 / t1      the one taking the longest to fall has the greater av. speed

Check:

h4 / h1 = t4^2 / t1^2     or

t4 / t1 = (h4 / h1)^1/2

In this case t4 / t1 = (4 / 1)^1/2 = 2  or twice the average speed

t1 = (2 h / g)^1/2 = .2^1/2 = .447       using g = 10

t4 = (2 h / g)^1/2 = .8^1/2 = .894

v1 = 1 / .447 = 2.24 m/s average speed

v4 = 4 / .894 = 4.47    or twice the average speed

Answer:

OPTRIMUM PRIDE URGH URGH URGH

Explanation:

AHHAAHAHAHAHA

Answer:

10-

Step-by-Step Explanation:

Answer:

Explanation:

constant acceleration???

assume it to be so

average speed is (10 + 30) / 2 = 20 m/s

t = d/v = 60/20 = 3 s

Answer:

kinetic energy is given as KE = (0.5) m v²given that : v = speed of the bottle in each case =  4 m/s when m = 0.125 kg KE = (0.5) m v² =  (0.5) (0.125) (4)²

Explanation:

Answer:

1. 0.5    2.  2    3. 3.75    4.  5

Explanation:

The time of motion of the 5 kg object will be the same as 1 kg since both objects are dropped from the same height.

The given parameters;

Mass of the first object, m1 = 1 kg

Mass of the second object, m2 = 5 kg

The final velocity of the objects during the downward motion is calculated as follows;

[tex]v_f = v_0 + gt\\\\v_f = 0 + gt\\\\\v_f = gt[/tex]

The time of motion of the object from the given height is calculated as;

[tex]h = v_0 t + \frac{1}{2} gt^2\\\\h = 0 + \frac{1}{2} gt^2\\\\h = \frac{1}{2} gt^2\\\\gt^2 = 2h\\\\t^2 = \frac{2h}{g} \\\\t = \sqrt{\frac{2h}{g} }[/tex]

The time of motion of each object is independent of mass of the object.

Thus, the time of motion of the 5 kg object will be the same as 1 kg since both objects are dropped from the same height.

Learn more about time of motion here: https://brainly.com/question/2364404

Explanation:

it's called a wave frequency

im pretty sure but than again I'm in Middle School but just trust me

Answer:

wave frequency i think. hope its helps

Answer:

the speed of the object has become constant.

Explanation:

At terminal velocity, air resistance equals in magnitude the weight of the falling object. Because the two are oppositely directed forces, the total force on the object is zero, and the speed of the object has become constant.

The locations where the riders feel less than their normal weight are Location A, Location C and Location D.

The given parameters;

The normal weight of the riders is calculated by applying Newton's second law of motion as follows;

W = mg

W = 9.8m

The apparent weight of the riders for the upward acceleration is calculated  as follows;

[tex]R = m(g + a)[/tex]

The apparent weight of the riders for the downward acceleration is calculated  as follows;

[tex]R = m(g - a)[/tex]

The apparent weight of the riders at location A is calculated as follows;

[tex]R_ A = m(9.8 - 10)\\\\R_ A = -0.2 m[/tex]

The apparent weight of the riders at location B is calculated as follows;

[tex]R_B = m(9.8 + 2)\\\\R_B = 11.8 m[/tex]

The apparent weight of the riders at location C is calculated as follows;

[tex]R_C = m(9.8 - 6)\\\\R_C = 3.8 m[/tex]

The apparent weight of the riders at location D is calculated as follows;

[tex]R_D = m(9.8 - 12)\\\\R_D = -2.2 m[/tex]

The apparent weight of the riders at location E is calculated as follows;

[tex]R_E = m(9.8 + 6)\\\\R_E = 15.8 m[/tex]

Thus, the locations where the riders feel less than their normal weight are;

Learn  more about Newton's second law and reading of a scale here: https://brainly.com/question/11603452

Answer:

True;   ar = v^2 / R      Radial acceleration because it moves in a circular path

    at = α R = tangential acceleration because its speed changes

a = at + ar    total acceleration equals sum of radial and tangential

Answer:

Explanation:

Speed is total distance traveled over time taken to do so.

If AB is measured in kilometers, time (t) for the whole trip is

t = AB/60 + AB/40  

t = 2AB/120 + 3AB/120

t = 5AB/120 hrs

Average speed is distance over time

s = 2AB / (5AB/120)

s = 2(120)/5

s = 48 km/hr

s = 48(1000 m/km / 3600 s/hr) = 13.333333.... 13 m/s

Velocity is displacement over time.

As displacement is zero, velocity is zero

v = 0 km/hr = 0 m/s

Pretty harsh reporting answers just because they are wrong.

Answer:

pressure = force / area

then pressure = 25 / 5 = "5" N/m^2