Cu = 0.385 J/gC, show smallest temperature change upon gaining 200 J.
Calculation:-
50.0 g Cu , Cu = 0.385 J/gC, will show the smallest change in temperature.
Temperature is the measure of hotness or coldness expressed in terms of any of several scales, including Fahrenheit and Celsius.
In A temperature change = (50 × 0.903)/ 200 = 0.22575 °C
In B temperature change = (50 × 0.385)/200 = 0.09625 °C,
Therefore, 50.0 g Cu , Cu = 0.385 J/gC, will show the smallest change in temperature.
Learn more about temperature here:- https://brainly.com/question/8382495
#SPJ4
Disclaimer:- Your question is incomplrte, please see below for complete question.
which of the following (with specific heat capacity provided) would show the smallest temperature change upon gaining 200.0 j of heat? which of the following (with specific heat capacity provided) would show the smallest temperature change upon gaining 200.0 j of heat?
a. 50.0 g fe,
b. 0.385 J/gC
c. both
d. none
Your job is to order and connect lead-acid cells used to supply an uninterruptible power supply (UPS). The battery output voltage must be 126 V and have a current capacity of not less than 250 A-hr. Each cell has a rating of 2 V and 100 A-hr. How many cells must be ordered and how would you connect them?
In order to achieve an output of 126 Volts and a current capacity of at least 250 Ahr, the three sets of 63 lead acid cells that were connected in series should be connected in parallel, which means that a total of 189 solar cells are needed to connect in series and parallel.
What is cell?
An electrical current can be produced by a cell, a unit structure, in addition to a conductor moving through a magnetic field. For instance, a semiconductor junction in a solar cell turns sunlight directly into energy.
As is well known, when cells are connected in series, their voltages are increased while maintaining the same current capacities, and when cells are connected in parallel, their voltages are maintained while increasing the current capacities.
The quantity of lead-acid cells that must be connected in parallel in order to generate 126 Volts is,
126 / 2 = 63
The no of lead acid cells required to connect in parallel to produce 250 Ahrs is,
250 / 100 = 2.5 ≈ 3
Therefore, three sets of 63 lead acid cells that were connected in series should be connected in parallel are required.
To know more about Cells:
https://brainly.com/question/28195966
#SPJ1
a searchlight uses a parabolic mirror to cast a beam of light in parallel rays where the light bulb is located at the focus of the parabola in order to give the best illumination. the mirror is modeled by y2
This can be calculated by using parabolic mirror concept, so the location of the light bulb is (15, 0).
A parabolic mirror is a kind of dish or a mirror that is said to have a reflective surface which is often used to take in or project any kind of energy e.g., light, sound, etc. A parabolic mirror is also known as paraboloid or paraboloidal reflector. This parabolic mirror works on a parabolic equations. which are in the form of
y^2 = 2ax
where focus is (a/2, 0)
Considering the equation for parabolic mirror modelling is
y^2 = 20(x – 10)
lets say, x- 10 = u
so, y^2 = 20u
So, the focus for U = ( 20/4; 0)
The focus for x = ( 5+ 10, 0)
= (15, 0)
Therefore, the bulb should be placed at focus and that is (15, 0)
To learn more about parabolic mirror, visit here
brainly.com/question/9710549
#SPJ4
with the aid of a string, a gyroscope is accelerated from rest to 36 rad/s in 0.7 s. (a) what is its angular acceleration in rad/s2? 51.43 correct: your answer is correct. rad/s2 (b) how many revolutions does it go through in the process?
The principles of angular motion's equations of motion are relevant to this query.
a) An angular acceleration of "80 rad/s2" will occur.
b) During the procedure, it completes "1.02 revolutions."
What is angular acceleration?Acceleration is the effect of a changing velocity. We refer to an object as speeding angularly if it is spinning and its speed is changing
To determine the angular acceleration, we shall utilize the first equation of motion for angular motion:
where,
= angle-moving speed =?
= 32 rad/s for the final angular speed
= 0 rad/s for the initial angular speed
t = time spent = 0.4 s
Therefore,
b)To determine the number of rotations, we will now utilize the second equation of motion for the angular motion:
where,
Angle displacement equals:?
Therefore,
Following are the numbers for the number of revolutions (N):
1.02 rotations per N
To know more about angular acceleration ,visit:
https://brainly.com/question/15311727
#SPJ4
how would an increase in time for the application of a given torque (e.g., 200 nm) affect angular impulse?
By increase impulse we can increase in time for the application of a given torque (e.g., 200 nm) affect angular impulse.
A force's magnitude and its line of action's angle of perpendicularity with respect to the axis of rotation are multiplied to form torque. Usually, the lowercase Greek letter tau is used to represent torque. It is typically indicated by the letter M when used as a moment of force. The term "torque" refers to the twisting force that an engine exerts when it works, and it expresses the rotational force. The use of a wrench, turning a doorknob, opening a soda bottle, or peddling a bicycle all involve torque. The equivalent of linear force in rotation is torque. The distance traveled in one unit of time is referred to as speed. Inverse proportionality describes the relationship between speed and torque.
Learn more about torque here:
https://brainly.com/question/6855614
#SPJ4
The weight of the child causes the spring to compress elastically from a length of 30cm to a new length of 23cm. Write down the equation which links compression, force and spring constant.
Answer:
its just 30/23 or 30 over 23
Explanation:
30
23
Which of the following are units that can be used to describe vector
quantities?
Check all that apply.
A. Seconds
B. Miles per hour
C. Meters
D. Grams
UBMIT
Units that can be used to describe vector quantities are :
For velocity B.) Miles per hour
For displacement C.) Meters
What is vector quantity?The physical quantities for which magnitude and direction are defined are known as vector quantities. Some examples are displacement, force, torque, momentum, acceleration and velocity.
Meter is the only basic SI unit that is a vector and others are scalars. Derived quantities can be vector or scalar, but vector quantity must have meters in its definition and unit. Although speed is a scalar quantity but velocity is a vector quantity that specifies both a direction and magnitude.
To know more about vector quantity, refer
https://brainly.com/question/626479
#SPJ1
✓= √219.8113) ✓=5.8 m/s RE=1/6/240)100.07²: / 44,946.75
Suzie Lavtaski (m=56 kg) is skiing at Bluebird Mountain. She is moving at 16 m/s across the crest of a ski hill
located 34 m above ground level at the end of the run.
+719
775
a. Determine Suzie's kinetic energy.
b. Determine Suzie's potential energy relative to the height of the ground at the end of the run.
c. Determine Suzie's total mechanical energy at the crest of the hill.
d. If no energy is lost or gained between the top of the hill and her initial arrival at the end of the run, then
what will be Suzie's total mechanical energy at the end of the run?
e. Determine Suzie's speed as she arrives at the end of the run and prior to braking to a stop.
• Audio Guided Solution
• Show Answer
The final answer is:
(a) Kinetic energy is 7168 J
(b) Potential energy is 18,678.24 J
(c) Total energy = 25,846.24 J
Given,
mass = 56 kg
Speed = 16 m/s
Distance = 34 m above ground level.
Now lets solve with he above value
(a) Kinetic energy = 1/2 × mv^2
=1/2 × 56 × 16^2
=7168 J
(b) Potential energy = m .g. h
=56 ×9.8 ×34
=18,678.24 J
(c) Total energy = kinetic energy + potential energy
=7168+18,678.24
=25,846.24 J
(d) Because no energy is lost or gained between the top of the hill and her initial arrival at the end of the run, then the total mechanical energy at the top of the hill or any place across the crest and the bottom of the crest .
Thus , Total mechanical energy = 25,846.24 J
(e) As we know, total energy = potential energy + kinetic energy
but at the end of the run it's potential energy is zero.
So, Total energy = 1/2 ×m ×v^2
25,846.24= 1/2 ×56 ×v^2
V= 30.38 m/s
Hence, Suzie's speed as she arrives at the end of the run is 30.38 m/s
Therefore, the kinetic energy can be responsible for all other energies as well as the speed of that object.
To know more about the kinetic energy, refer: brainly.com/question/15764612
#SPJ1
A large truck of mass 4m is traveling at a speed of v when it collides with a small car of mass m that is at rest. The truck and car stick together after the collision. Question the speed of the center of mass of the truck-car system as the truck and car move off together is.
The speed of the center of mass of the truck-car system as the truck and car move off together is 4/5v.
State the principle of conservation of momentum
An explanation of the law of conservation of momentum is provided below.
For an isolated system, the total momentum of the two objects prior to their collision and their total momentum following it are identical.
The aforementioned statement asserts that a system of objects has a constant or stable total momentum. Momentum conservation refers to this.
The following informations are given in the question,
The mass of the large truck = 4m
The velocity of the large truck = v
The mass of the small car = m
According to the conservation of momentum,
m1vi1 +m2vi2 = m1vf1 + m2vf2
where,
m1 = mass of the truck
m2 = mass of car
vi1 = initial velocity of truck
vf1 = final velocity of truck
vi2 = initial velocity of car
vf2 = final velocity of car
After the collision the car and the truck move together with the same velocity say v.
After the collision the conserving momentum will be:
m1v + m2x0 = (m1 + m2)V
4mv + 0 = 5mV
4mv = 5mV
V = 4/5
As the momentum of the system is conserved as such there is no acceleration and the center of mass of the car-truck system move with the velocity of 4/5v.
Hence, the answer is 4/5v.
To learn more about conservation of momentum from the given link
https://brainly.com/question/7538238
#SPJ4
At constant mass, the __________________ of an object varies (directly, inversely) with the net external force applied. That is to say, that an object’s acceleration increases as the force applied is (decreased, increased), but its acceleration decreases if the force applied is (decreased, increased).
At constant mass, the acceleration of an object varies (directly) with the net external force applied. That is to say, an object’s acceleration increases as the force applied is (increased), but its acceleration decreases if the force applied is (decreased)
Acceleration is the rate of change of the velocity of an item with appreciation to time. Accelerations are vector portions. The orientation of an item's acceleration is given by the orientation of the net pressure appearing on that object.
Acceleration is the charge at which velocity modifications with time, in terms of each speed and route. A factor or an object moving in a straight line is accelerated if it quickens or slows down. movement on a circle is extended despite the fact that the rate is consistent because the course is continually changing.
Learn more about acceleration here:- https://brainly.com/question/29110429
#SPJ4
Which is an outer planet?
Please look at picture
Thanks so much! Have a great day!
Anonymous :)
The third one maybe??
If not then my bad
radar, the first link in the cosmic distance chain, is used to establish the baseline distance necessary for the second link, parallax. what baseline distance must we know before we can measure parallax? view available hint(s) for part a radar, the first link in the cosmic distance chain, is used to establish the baseline distance necessary for the second link, parallax. what baseline distance must we know before we can measure parallax? the distance from earth to venus the distance to the nearest star besides the sun the earth-sun distance the distances of all the planets in our solar system from earth
To learn about the parallax and solar system.
What is parallax?
An object's apparent displacement or apparent direction difference when viewed from two separate positions that are not in a straight line with the object Specifically: the angle between the directions of two celestial bodies as seen from two locations on the earth's orbit.
What is solar system?
The solar system includes the Sun and all the celestial bodies that revolve around it. The solar system is made up of many different objects, such as planets, comets, asteroids, and meteors.
Distance between the Earth and the Sun. Explanation: The Earth-Sun distance is the baseline measurement that we need to be aware of in order to estimate parallax.
Therefore, the Earth-Sun distance is the baseline measurement that we need to be aware of in order to estimate parallax.
Learn more about parallax from the given link.
https://brainly.com/question/29210252
#SPJ4
white light spans the wavelength range between about 400 nm and 700 nm. if white light passes through two slits 0.257 mm apart and falls on a screen 3 m from the slits, what is the distance between the first-order violet and the first-order red fringes?
The separation on the screen between the two wavelengths' first-order bright fringes is 0.0031m, or 3.10 mm.
A wavelength in terms of what?mathematical illustration When describing travelling sinusoidal waves mathematically, their velocity (in the x direction), frequency, and wavelength are typically written as follows: where y is the value of the wave at any position x and time t, and A is the wave's amplitude.
y = Fringe distance
d= Distance between slits = 0.257mm
L = Screen distance = 3m
λ = Wavelength
When constructive interference occurs
y/L = mλ/d
In terms of first order wavelength
y₁/4 = 1×400×10⁻⁹/0.257×10⁻³
y₁ = 4 × 1×400×10⁻⁹/0.257×10⁻³
y₁ = 0.0062m
y₂/4 = 1×700×10⁻⁹/0.257×10⁻³
y₂ = 0.0093m
The fringe separation is determined by
y₁ - y₂ = 0.0062 - 0.0093
y₁ - y₂ = 0.0031.
The separation on the screen between the two wavelengths' first-order bright fringes is 0.0031m, or 3.10 mm.
To know more about wavelength visit:
https://brainly.com/question/13986329
#SPJ4
the wheel of a car needs to generate a total kinetic energy of 401.0 n to keep the car moving. if the wheel weighs 6700 g, find the linear velocity with which it must rotate. consider the wheel to be a flat cylinder.
The linear velocity with which the wheel must rotate is 7.48 m/s.
The wheel of a car needs to generate a total kinetic energy of 401.0 n to keep the car moving.
If the wheel weighs 6700 g, find the linear velocity with which it must rotate.
Consider the wheel to be a flat cylinder.
Assuming you want the final answer in terms of velocity, we can use the equation:
KE = 1/2×mv²
where KE is the kinetic energy, m is the mass, and v is the velocity.
We can rearrange this equation to solve for velocity ,
v = sqrt(2×KE/m)
Now we just plug in the known values and solve:
v = sqrt(2×401.0 n/6700 g)
v = 7.48 m/s
Hence , the linear velocity with which the wheel must rotate is 7.48 m/s.
Learn more about kinetic energy at : https://brainly.com/question/26472013
#SPJ4
craig is trying to push a heavy crate up a wooden ramp, but the crate won't budge.
A. Up the ramp
B. Down the ramp
C. The friction force is zero
D. There is not enough information to tell
Craig is trying to push a heavy crate up a wooden ramp, but the crate won't budge Up the ramp.
Frictional force refers to the pressure generated via two surfaces that touch and slide toward every other. a few factors affect the frictional pressure: those forces are specifically stricken by the surface texture and the amount of pressure impelling them together.
Friction can gradually things down and prevent desk-bound matters from shifting. In a frictionless global, extra gadgets would be sliding about, clothes and footwear might be difficult to keep on and it might be very difficult for human beings or vehicles to get shifting or change direction.
using lubricants such as oil or grease can reduce the friction between the surfaces. by using polishing the floor, sprucing makes the floor easy and friction may be decreased.
To learn more about frictional force visit here:
brainly.com/question/1389727
#SPJ4
Al tomar 5 medidas de masa para monedas de 25 centavos, obtuvimos masas de 12.45 g, 12.32 g, 12.54 g, 12.30 g y 12.50 g. Se te pide ofrecer el error relativo para el valor promedio de las 5 medidas. ¿Cuál es el error relativo si la masa teórica es 12.0 g?
a) 3.2%
b) 5%
c) 2.8%
d) 3.5%
Alguien me podria ayudar con esta pregunta??? :,D
Answer:
Explanation:
∑ m / 5 = (12.45 + 12.32 + 12.54 + 12.30 + 12.50) / 5 = 12.42
Δm = 12.42 - 12.0 = 0.42
ε·100% = Δm·100% / m = 0.42·100% / 12 ≈ 3.5 %
Answer:
d) 3.5%
3. (High Elevation Upward)
A baseball player throws a baseball straight upward with a velocity of 12.0 m/s from an initial
height of 2.2 m.
a.) How long does it take for the baseball to hit to the ground?
b.) What is the velocity of the baseball just before it hits the ground?
c.) What is the maximum height attained by the baseball?
Answer:
Below
Explanation:
a) d= 2.2 + 12 t + 1/2 at^2 d= 0 when it hits the ground
a = - 9.81 m/s^2
solve for t = 2.62 s ( Use Quadratic Formula or graphing method)
b) vf = vo + at
= 12 - 9.81 (2.62) = -13.7 m/s ( or 13 m/s DOWNWARD)
c) vf = 0 at max height
0 = vo + at
= 12 - 9.81 t finds t = 1.22 s
the d = 2.2 + 12 (1.22) - 1/2 * 9.81 (1.22^2) = 9.53 m ( if you graphed the equation for part a you can see this value at the peak)
Answer is 8 however I do not know how to get there
Answer:
C. 10 m·s⁻¹
Explanation:
The velocity is numerically equal to the area of the figure lying under the acceleration graph
V = 2·1.0 + (1.0 + 3.0)·(6 - 2) / 2 = 2.0 + 4.0·4 / 2 = 10 m·s⁻¹
Two identical conducting spheres are placed with their centers 0.80 m apart. One is given a charge of +6 × 10−9 C, and the other is given
a charge of −11 × 10−9 C.
Find the electric force exerted on one sphere by the other.
Please help asap
The electric force exerted on one sphere by the other is equal to 9.27 × 10⁻⁷ N.
What is coulomb's law?According to Coulomb’s law, the force of attraction between two charged bodies is the product of their charges and is inversely proportional to the square of the distance by which they are separated. This force acts along the line joining the two-point charges.
The magnitude of the electric force is given by:
[tex]F = k\frac{q_1q_2}{r^2}[/tex]
where k is constant proportionality and has a value of 8.99 × 10⁹ N.m²/C².
Given the charge on one sphere, q₁ = + 6 ×10⁻⁹ C
The charge on the other sphere, q₂ = -11 × 10⁻⁹C
The distance between these two charges, r = 0.80 m
The magnitude of electric force between the spheres will be:
[tex]F = 8.99 \times 10 ^9(\frac{6\times 10^{-9}\times 11\times 10^{-9}}{(0.80)^2} )[/tex]
F = 927.09 × 10⁻⁹ N
F = 9.27 × 10⁻⁷ N
Learn more about Coulomb's law, here:
https://brainly.com/question/506926
#SPJ1
A woman walks a distance of 240 m with an average speed of 1.2 m/s. What time was required to walk this distance? Answer in Minutes
Answer:
Explanation:
Given:
D = 240 m
V = 1.2 m/s
___________
t - ?
t = D / V
t = 240 / 1.2 = 200 c or t = 200 / 60 ≈ 3,33 min
Uv rays are a type of ""ionizing radiation"" and are energetic enough to damage biological tissue such that they degrade into ions and electrons. What other forms of electromagnetic radiation do you think could be ionizing?.
Electromagnetic radiation that possesses ionizing properties apart from UV radiation is x- rays and gamma rays.
In comparison to shorter wavelengths, higher frequency waves like X and gamma rays, longer wavelengths, lower frequency waves like heat and radio have less energy.
Electromagnetic (EM) radiation is not always ionizing. Ionization only occurs in the high-frequency region of the electromagnetic spectrum, which includes X and gamma rays.
When we refer to x-rays as "ionizing," we mean that they have the special ability to strip electrons from the atoms and molecules in the material they pass through. Our body's cells' molecules can change due to ionizing activity. That action might ultimately be harmful and can lead to cancer.
For more information on ionizing radiation kindly visit to
https://brainly.com/question/9621276
#SPJ4
A 1000 N object is pulled along a level surface with a horizontal force of 200 N. The object moves with a constant velocity of 2 m/s. Calculate the k.
0.2 is the value of coefficient of friction (k)
F=kN
F=horizontal force
n=Normal Force
k=coefficient of friction
k=F/N
k=200/1000
k=0.2
The ratio of the normal force pushing two surfaces together to the frictional force preventing motion between them is known as the friction coefficient. Usually, the Greek letter mu is used to indicate it .N is the normal force, and F is the frictional force, hence F = N/N.
Due to the fact that both F and N are measured in units of force, the coefficient of friction has no dimensions (such as newtons or pounds). The coefficient of friction can have a variety of values for both static and dynamic friction. Static friction occurs when an object encounters friction that resists any applied force, keeping the object at rest until the static frictional force is released. In kinetic friction, the frictional force resists the motion of the object.
To know more about coefficient of friction visit brainly.com/question/136431
#SPJ1
a 15.0 mf capacitor is charged by a 150.0 v power supply, then disconnected from the power and connected in series with a 0.280 mh inductor. calculate: (a) the oscillation frequency of the circuit; (b) the energy stored in the capacitor at time t
Given,
Capacitance of capacitor = 15.0 mf
Voltage = 150.0-V
Inductance = 0.280 m H
What is oscillation?
The act of any variable or measure fluctuating repeatedly about its equilibrium position in time is known as oscillation. A periodic change in a substance's value between two values or around its central value is another way to define oscillation.
(a) In the circuit, the oscillation of frequency is,
f = 1/2[tex]\pi[/tex] sqrt 1/ 0.280×10⁻3×20×10⁻6
f = 2126.9 Hz
(b) U = 1/2 CV²
U = 1/2(20×10⁻6)(150)²
U = 0.225J
To learn more about oscillation
here: https://brainly.com/question/27193056
#SPJ4
a) The oscillation frequency of the circuit is 2126.9 Hz.
b)The energy stored in the capacitor at time t is 0.225J.
What is oscillation?
The act of any variable or measure fluctuating repeatedly about its equilibrium position in time is known as oscillation. A periodic change in a substance's value between two values or around its central value is another way to define oscillation.
Given,
Capacitance of capacitor = 15.0 mf
Voltage = 150.0-V
Inductance = 0.280 m H
(a) In the circuit, the oscillation of frequency is,
f = 1/2 sqrt 1/ 0.280×10⁻3×20×10⁻6
f = 2126.9 Hz
(b) U = 1/2 CV²
U = 1/2(20×10⁻6)(150)²
U = 0.225J
To learn more about oscillation
brainly.com/question/27193056
#SPJ4
pluto differs significantly from the eight solar system planets in that
Pluto differs significantly from the eight solar system planets in that it has not cleared its orbit.
The solar system is the gravitationally sure system of the solar and the items that orbit it. It is shaped four.6 billion years in the past from the gravitational crumble of a large interstellar molecular cloud. The extensive majority (99.86%) of the gadget's mass is within the solar, with the maximum of the final mass contained inside the planet Jupiter. The four inner machine planets—Mercury, Venus, Earth, and Mars—are terrestrial planets, being composed generally of rock and metal. The four large planets of the outer machine are significantly large and greater big than the terrestrials. the two biggest, Jupiter and Saturn, are gasoline giants, being composed mainly of hydrogen and helium; the next, Uranus and Neptune, are ice giants, being composed mostly of volatile substances with quite excessive melting points in comparison with hydrogen and helium, together with water, ammonia, and methane. All 8 planets have almost circular orbits that lie near the aircraft of Earth's orbit, referred to as the ecliptic.
There are an unknown wide variety of smaller dwarf planets and innumerable small sun system our bodies orbiting the solar. Six of the predominant planets, the six biggest possible dwarf planets, and a few of the smaller bodies are orbited via natural satellites, generally known as "moons" after Earth's Moon. herbal satellites, Jupiter's moon Ganymede and Saturn's moon Titan, are large but no longer more massive than Mercury, the smallest terrestrial planet, and Jupiter's moon Callisto is sort of as massive.
To learn more about solar systems visit here:
brainly.com/question/11953855
#SPJ4
a 50 kg crate is pulled across the ice with a rope. a force of 100n is applied at some angle with the horizontal. the vertical component of the force in the rope is 40n. neglecting friction, calculate the acceleration of the crate and the upward force the ice exerts on the crate as it is pulled.
The acceleration of the crate is 1.83 m/s² and the upward force is 40 N.
We need to know about force to solve this problem. According to second Newton's Law, the force applied to an object will be proportional to mass and acceleration. Hence, it can be written as
F = m . a
where F is force, m is mass and a is acceleration
From the question above, we know that
Fy = 40 N
F = 100 N
m = 50 kg
Find the horizontal force
F² = Fy² + Fx²
100² = 40² + Fx²
Fx² = 100² - 40²
Fx² = 8400
Fx = 91.65 N
Find the acceleration of the crate
Fx = m . a
91.65 = 50 . a
a = 1.83 m/s²
Find more on force at: https://brainly.com/question/25239010
#SPJ4
A student is the pitcher on a baseball team. They pitch the ball toward home plate. It begins in a straight line and then curves toward the ground. What forces are acting on the ball?
a. inertia and nuclear
b. magnetism and inertia
c. friction and gravity
d. friction and electricity
Answer: The answer is C) Friction and Gravity.
Explanation: Friction acts against an object or slows an object down whereas, gravity pulls an object. In this case, the ball is curving towards the ground because gravity is pulling it and friction is slowing the ball down.
Answer:
C
Explanation:
What conditions can cause hurricanes to change direction?
need now please
According to the research, the correct answer is that higher latitudes are conditions that can cause hurricanes to change direction.
What are hurricanes?It is a meteorological phenomenon that usually originates in the tropical areas of the lower atmosphere, being a wind of extraordinary force that forms a whirlwind.
In this sense, the direction of these winds is influenced by the rotation of the Earth (Coriolis effect) and that as they move a little towards the higher latitudes, the direction winds are reversed and blow from west to east.
Therefore, we can conclude that the condition that affects the direction of hurricanes is when these tropical phenomena reach the highest latitudes.
Learn more about hurricanes here: https://brainly.com/question/18221136
#SPJ1
how does the big island of hawaii compare to the mount everest of the himalayas in terms of mass (weight)?
Its total height is close to 33,500 feet (10,211 meters), which is significantly higher than Mount Everest, which is 29,029 feet (8,848 meters) above sea level and is the tallest mountain on earth (Chomolungma in Tibetan).
The Mahalangur Himal sub-range of the Himalayas is home to Mount Everest, which is the tallest mountain on Earth above sea level. Crossing its top point is the China-Nepal border. The Chinese and Nepali governments most recently established its elevation in 2020, at 8,848.86 m. A mountain summit in the Himalaya mountain range is Mount Everest. Between Nepal and Tibet, a Chinese autonomous region, it is situated. It is regarded as the highest point on Earth because it is 29,032 feet (8,849 meters) tall. George Everest, a former Surveyor General of India, was honoured with the mountain's naming in the nineteenth century. Mount Everest is thought to be between 50 and 60 million years old, according to National Geographic. Regarding the perception of "Mount Everest" in the public mind.
Learn more about Mount Everest here:
https://brainly.com/question/15169116
#SPJ4
If f = 8. 0 n and m = 1. 0 kg, what is the tension in the connecting string? the pulley and all surfaces are frictionless.
Using Newton's second law we can find that the tension in the spring is
3.8 N.
What is tension?
Tension can be defined as a force which acts along the length , a force carried by a flexible medium like rope or cable . It can be defined as an action-reaction pair of forces acting at each end of the said elements.
It can be calculated by the given formula : T = mg + ma. It can be defined as a pulling force as it exerts a certain amount of pressure in the given area. Tension is a force so it is expressed in Newtons (N).
Newton second law and tension are related in the following way
The wire which is under tension is proportional to the force of pulling. The final application of Newton’s law deals with the tension.
To know more about Tension from the given link
https://brainly.com/question/24994188
#SPJ4
Free fall acceleration 9.8m/s2 means that when sn object falls down
Free fall acceleration 9.8 m/s² means that when an object falls down due to gravity, its velocity increases by 9.8 m/s every second.
What is free fall?Free fall refers to the motion of an object due to the attractive force of the earth known as gravity only acting on the object.
When an object is experiencing free fall, the object experiences acceleration due to gravity which has a constant value of 9.8 m/s².
This constant varies at several points on the earth's surface. The farther away an object is from the earth's surface, the lower the value of the free fall acceleration or acceleration due to gravity will be.
Learn more about free fall at: https://brainly.com/question/12167131
#SPJ1
an important news announcement is transmitted by radio waves to people sitting next to their radios 11 km from the station and by sound waves to people sitting across the newsroom 5.84 m from the newscaster. taking the speed of sound in air to be 343 m/s, who receives the news first?
As we see the far people receive the news before the people across the news-station room because the electromagnetic wave is much greater than sound wave.
What is electromagnetic wave?In physics, electromagnetic wave consists of electromagnetic field waves that propagate through space and carry electromagnetic radiation energy. These include radio waves, microwaves, infrared rays, light, ultraviolet rays, X-rays, and gamma rays.And we call these electromagnetic waves 'electric' because they have an electric field, and we call them 'magnetic' because they have a magnetic field, and the wave equation Because it propagates outward according to the , it resembles all the other waves we have seen.Electromagnetic waves differ from mechanical waves in that they do not require a medium for propagation. This means that electromagnetic waves can propagate not only in air and solids, but also in vacuum space. An electromagnetic wave consists of two waves oscillating perpendicular to each other.One is an oscillating electric field and the other is an oscillating magnetic field. The wave propagation direction is perpendicular to the electric and magnetic fields.To learn more about electromagnetic wave from the given link :
https://brainly.com/question/3101711
#SPJ4