Let's see the definition of each concept:
An element is a substance only formed by atoms of the same element. For example, Na (sodium), O2 (oxygen), C (carbon).
A compound is a substance formed by the combination of two or more elements, through a chemical bond. For example, H2O (water), and CO2 (carbon dioxide).
A pure substance can be an element or a compound, which is alone in the media. For example, the O2 present in an oxygen bullet is pure, because it is only oxygen.
A mixture is when you have 2 or more elements or compounds present in the same media. For example, the air is a mixture of oxygen and nitrogen.
Then, the answer is that NaCl is a compound and a pure substance.
What is the mass of 7.10 moles of magnesium chloride, MgCl₂?
Answer:
675.99 g
Explanation:
1 mole of MgCl2 = 24.31 + 2(35.45) = 95.21 g
so mass of 7.10 moles = 7.10 x 95.21 = 675.991 g or 675.99 g
help me please if you can
nswer
C. Cr₂O₃ (s)
Explanation
[tex]Cr_2O_3(s)+2Al(s)\rightarrow2Cr(s)+Al_2O_3(s)[/tex]An oxidizing agent is a substance that causes oxidation by accepting electrons; therefore, its oxidation state decreases.
A reducing agent is a substance that causes reduction by losing electrons; therefore its oxidation state increases.
The simplest way to answer this is that the oxidizing agent is the substance that is reduced, while the reducing agent is the substance that is oxidized.
Therefore, CrA
In the reaction of magnesium nitrate (aq) and sodium hydroxide (aq), the spectator ions are:
Answer:Magnesium nitrate will react with sodium hydroxide to form magnesium hydroxide and sodium nitrate.
Explanation:
Calculate the mass of water produced if 12.1 g of ethanol (C2H6O) undergoes the reaction below:
C2H6O (l) + O2 (g) → CO2 (g) + H2O (l)
The mass of water produced if 12.1 g of ethanol (C₂H₆O) undergoes the reaction is 14.2 g.
Ethanol is a natural compound. it is simple alcohol with the chemical components C₂H₆O. Its formula may be also written as CH₃−CH₂−OH or C₂H₅OH. Ethanol is a risky, flammable, colorless liquid with a characteristic wine-like odor and smelly taste.
Ethanol is used in the manufacture of medication, plastics, lacquers, polishes, plasticizers, and cosmetics. Ethanol is used in medicine as a topical antiinfective, and as an antidote for ethylene glycol or methanol overdose.
Balancing the reaction,
C₂H₆O (l) + 3O₂ (g) → 2CO₂ (g) + 3H₂O (l)
Mass of ethanol given = 12.1g
the molar mass of ethanol = 46 g
Therefore given mole = 46/12.1
= 3.80 mole.
1 mole of ethanol = 3 moles of H₂O
∵ 46 g of ethanol = 54g of water
∴ 12.1 g of ethanol = 54g / 46 g × 12.1 g
= 14.2 g of ethanol produced.
Learn more about ethanol here:-https://brainly.com/question/13423304
#SPJ1
Hydrochloric acid reacts with potassium hydroxide, according to the following equation:
HCl + KOH → KCl + H2O
If 15 cm3 of 0.5 M HCl are exactly neutralized with 24 cm3 of solution of
KOH. What is the concentration of the KOH solution?
The concentration of KOH solution if 15 cm³ of 0.5 M HCl are exactly neutralised with 24 cm3 of solution of KOH is 0.313M.
How to calculate concentration?The concentration of a solution can be calculated by using the following formula;
C₁V₁/C₂V₂ = na/nb
Where;
C₁ = initial concentrationV₁ = initial volumeC₂ = final concentrationV₂ = final volumena = number of moles of acidnb = number of moles of baseAccording to this question, a reaction between hydrochloric acid and potassium hydroxide forms water and potassium chloride as follows:
HCl + KOH → KCl + H2O
This suggests that na and nb values are both 1.
15 × 0.5 = 24 × C₂
7.5 = 24C₂
C₂ = 7.5/24
C₂ = 0.313M
Therefore, the concentration of KOH solution if 15 cm³ of 0.5 M HCl are exactly neutralised with 24 cm3 of solution of KOH is 0.313M.
Learn more about molarity at: https://brainly.com/question/16587536
#SPJ1
Convert
21 miles/hr to cm/s
Show two digits after decimal.
By converting 21 miles/hr to centimeter we get :
938.784 cm/s
Explanation:Miles per hour is a unit of speed that expresses the distance traveled in miles in one hour. The mile per hour is a customary and imperial unit of speed in the United States. Miles per hour is commonly abbreviated as mph, but it is also abbreviated as mi/h or MPH. 1 mile per hour, for example, can be written as 1 mph, 1 mi/h, or 1 MPH.The following formula can be used to calculate miles per hour:
dmi /thr = vmph
Distance in miles divided by time in hours equals velocity in miles per hour.Steps to convert miles per hour to cm :
Multiply the speed by the conversion ratio to convert a mile per hour measurement to a centimeter per second measurement.Because one mile per hour equals 44.704 centimeters per second, you can convert using this simple formula:44.704 centimeters per second = miles per hourThe speed in centimeters per second is calculated by multiplying the miles per hour by 44.704.To convert 21 miles/hr to cm/s:
21 mph =
= (21 × 44.704)
= 938.784cm/s
21mph is 938.784cm/s
To learn more about unit conversions refer to :
https://brainly.com/question/13016491
#SPJ13
In the longstanding war between coyotes and sheep ranchers in New Mexico, studies show that coyotes kill sheep. The percentage of sheep lost from
herds in areas where coyotes have been exterminated (killed off) is about the same as the percentage lost in areas where coyotes are still present.
What is the most likely explanation for the similarity on the percentage of sheep lost in bother areas. Coyotes were protective sheep. Another predator it was killing sheep. Did she die from overcrowding. Coyotes we’re praying on sicker week sheep
In the longstanding war between coyotes and sheep ranchers in New Mexico, studies show that coyotes kill sheep. The most likely explanation for the similarity in the percentage of sheep lost in other areas is that Another predator was killing sheep. Option B
This is further explained below.
What is a predator?Generally, A biological relationship known as predation occurs when one creature, known as the predator, hunts down and consumes another organism, known as the prey.
It belongs to the same group of common feeding behaviors as parasitism, micropredation, and parasitoids. Parasitism is a subtype of parasitoids.
In conclusion, Studies have shown that coyotes are the aggressors in the conflict that has been going on for a long time in New Mexico between sheep farmers and coyotes.
The hypothesis that another kind of predator was responsible for the loss of sheep in the same proportion in other locations is the one with the highest probability of being correct. Alternative B
Read more about predator
https://brainly.com/question/3775053
#SPJ1
Gannymeade is the largest satellite (moon) in the Solar System, larger than the planet Mercury. Why is Gannymeade classified as a satellite instead of a planet?
Please help.
Ganymede is the largest satellite (moon) in the Solar System, larger than the planet Mercury. Ganymede is classified as a satellite instead of a planet as it orbits a planet, and not the Sun.
One has to directly orbit a star to be a planet, and Ganymede orbits a planet, Jupiter, therefore, it is not a planet but a satellite. Ganymede is a satellite as it has an irregular shaped orbit. Ganymede rotates at a faster speed than Mercury and it is composed of ice at the uppermost layer and beneath that is rock. Ganymede takes about seven Earth-days to orbit the planet Jupiter.Ganymede has a lower density even though it is larger in size. It is larger than the planet Mercury.To learn more about satellites,
brainly.com/question/2477483
#SPJ1
Identify the reactants and products,explain what the (aq) and (s) represent in the reaction in the washing machine
In a chemical reaction, usually, we have something very standard, whatever is on the left side of the arrow will be Reactant, and whatever comes after the arrow will be product, so for this reaction:
Na2CO3 (aq) + MgSO4 (aq) -> Na2SO4 (aq) + MgCO3 (s)
The reactants will be: Na2CO3 and MgSO4
The products will be: Na2SO4 and MgCO3
The aq or s representation means the physical state in which the compound will be found in water, if it is aq, this means that the compound will dissolve in water and it will be found in an aqueous state. If the letter is s, therefore the compound will be a solid in water, forming a precipitate.
Since we have a double change in the positions of the elements, this will be called a Double Displacement reaction, in which we have:
AB + CD -> AC + BD
Heavy metal ions like lead(II) can be precipitated from laboratory wastewater by adding sodium sulfide, Na2S. Will all the lead be removed from 11.8 mL of 7.40×10-3 M Pb(NO3)2 upon addition of 13.7 mL of 0.0117 M Na2S? If all the lead is removed, how many moles of lead is this? If not, how many moles of Pb remain?
All the lead ions will not be removed and 6.502 ×10-8 moles of lead ions remain in solution.
The equation of the reaction is;
Pb(NO3)2(aq) + Na2S(aq) ---------> PbS(s) + 2NaNO3(aq)
Number of moles of Pb(NO3)2 = concentration × volume
Number of moles of Pb(NO3)2 = 11.2 mL/100 × 7.10×10-3 M = 7.952 ×10-8 moles
Number of moles of Na2S = 12.4 mL/1000 × 0.0117 M = 1.45 × 10-8 moles
Since the reaction is 1:1, 7.952 ×10-8 moles of Pb(NO3)2 should react with 7.952 ×10-8 moles of Na2S in order to remove all the Pb^2+ ions but we have only 1.45 × 10-8 moles of Na2S hence all the lead ions will not be removed.
Amount of lead ions remaining = 7.952 ×10-8 - 1.45 × 10-8 moles
= 6.502 ×10-8 moles of lead ions
Learn more: brainly.com/question/13516179
The rate constant for this first‑order reaction is 0.0960 s−1
at 400 ∘C.
A⟶products
After how many seconds will 11.6%
of the reactant remain?
The time taken for 11.6% of the products to remain is 22.4 s.
What is the rate of reaction?The rate of reaction is the rate at which the reactants are depleted from the system or the rate at which the products appear in the system. Now we have a first order reaction. Recall that the formula of the first order reaction is written as;
ln[A] = -kt + ln[A]o
ln[A] = concertation at time t
t = time taken
k = rate constant
[A]o = initial concentration
Given that;
[A] = 0.116[A]o and k = 0.0960 s−1
Then;
ln0.116[A]o = -0.0960t + ln[A]o
0.0960t = ln[A]o - ln0.116[A]o
0.0960t = ln([A]o/0.116[A]o)
0.0960t = ln(1/0.116)
0.0960t = 2.154
t = 2.154/0.0960
t = 22.4 s
Learn more about first order reaction:https://brainly.com/question/12446045
#SPJ1
Why do gas particles spread out and occupy (take up) as much space as possible? (Why does it make sense that their volume can increase or decrease based on the size of their container?)
Gas particles have not definite volume, so they spread out and occupy much space as possible.
There's a great deal of empty space between particles, that have plenty of kinetic energy and are not particularly interested in each other. Gas particles circulate very fast and collide with one another, causing them to diffuse, or spread out until they're evenly distributed all through the quantity of the container.
A gas is depend that has neither a hard and fast extent nor a set form. rather, a gas takes each the quantity and the form of its container. It spreads out to take up all to be had area.
They don't have any precise volume. This means that gases always spread out in all instructions to fill the field into which they may be positioned. This spreading out of gases to fill all of the available space is referred to as diffusion. They may be compressed effortlessly.
Learn more about Gas particles here:- https://brainly.com/question/28787971
#SPJ1
If you dissolved 54 grams of ammonia in 100 grams of water at 400C would it be considered saturated, unsaturated, or supersaturated? Why?
How many grams of copper(II)sulfate would dissolve in 200g of water at 3○C?
How many grams of ammonia could be dissolved in 50g of water at 150C?
We have the responses as;
1) The solution is unsaturated
2) The solubility is 30 g of copper(II)sulfate
3) The solubility is 100g of ammonia
What is solubility?The term solubility has to do with the amount of solute that can dissolve in solution at a given temperature. Let us recall that a solution is composed of a solute and a solvent. The solvent is the medium wherein the solute is dissolved.
1) Given the fact that the solubility of ammonia in water at 40 degrees Celsius is actually about 300 g/L t the follows that If you dissolved 54 grams of ammonia in 100 grams of water at tat temperature, the solution is regarded as unsaturated.
2) if about 15 g of copper(II)sulfate dissolves in 100 g of water at 3○C
x would dissolve in 200 g of water
x = 15 g * 200 g / 100 g
x = 30 g of copper(II)sulfate
3) About 100g of ammonia could be dissolved in 50g of water at 150C.
Learn more about solubility:https://brainly.com/question/28170449
#SPJ1
Use this reaction to answer the questions and explain :
CO(g)+2H2(g)-CH3OH(g) Delta H= -91.8kJ
1- If the pressure increases, what is the effect on the value of the equilibrium constant k?
2- If the pressure increases, Will the concentration of H2 increase , decrease or stay the same ? Why?
1) If the pressure increases, the equilibrium constant K does not change.
2) If the pressure increases, the concentration of H₂ decreases.
The reaction is given by:
CO + 2H₂ ⇄ CH₃OH ΔH = -91.8 KJ
1) If the pressure increases, the equilibrium constant K does not change because the only factor affect the equilibrium constant k is the temperature.
2) If the pressure increases the equilibrium position shifted to right and increases the yield of product for this reaction .
p ∝ n
Thus, using the given reaction
CO + 2H₂ ⇄ CH₃OH ΔH = -91.8 KJ
1) If the pressure increases, the equilibrium constant K does not change.
2) If the pressure increases, the concentration of H₂ decreases.
To learn more about equilibrium reaction here
https://brainly.com/question/2009610
#SPJ1
Please help I don’t get this
The molar mass of a chemical compound is defined as the mass of the sample divided by the quantity, or number of moles, in the sample, measured in moles. The total grams of Nacl needed to get 0.241 moles exists 14.084 g.
What is meant by Molar mass?The molar mass of a chemical compound is determined by dividing its mass by the quantity of that compound, expressed as the number of moles in the sample, measured in moles. The molar mass of a substance is a bulk attribute rather than a molecular one.
The molar mass of a chemical compound is defined as the mass of the sample divided by the quantity, or number of moles, in the sample, measured in moles.
Molar mass of Nacl = 58.44g
Total grams of Nacl needed to get 0.241 moles = moles number × molar mass
= 0.241 × 58.44
= 14.084 g
Therefore, the total grams of Nacl needed to get 0.241 moles exists 14.084 g.
To learn more about Molar mass refer to:
https://brainly.com/question/837939
#SPJ13
Investigating Energy Systems
Harnessing Human Energy Chapter 1 Lesson 1.2
Reasoning Tool
Possible subclaims:
The Battery System does have energy.
or
The Battery System does not have energy.
The Hand-Crank Generator System does have energy.
or
The Hand-Crank Generator System does not have energy.
The Solar Cell System does have energy.
or
The Solar Cell System does not have energy.
Evidence
(observations about whether the system does or does not have energy)
This matters because . . .
(How does this evidence support the subclaim?)
Therefore, . . .
(subclaim)
The Possible sub-claim in relation to Investigating Energy Systems is the Solar Cell System does have energy.
Evidence is that -
As the sun shines on a solar panel, energy is captured by the Photovoltaic cells on the panel. This is significant as it generates electrical charges which causes the flow of electricity.
These are accelerated by shifting an internal electrical field within the cell. Therefore, a solar cell system is one that has amount of energy.
A solar cell is also known as a photovoltaic cell. It is an electrical device which uses a natural physical and chemical phenomenon, a photovoltaic effect to convert light energy directly into the electricity.
Solar cells are known as photovoltaic cells. These PV cells converts sunlight directly into electricity. Solar cells produces electricity in remote locations which allows machines to be powered very far from the nearest electrical outlet. Solar cells are reliable and low-maintenance source of renewable energy.
Therefore, A PV cell can reflect and absorb, or pass via light that strikes it. The semiconductor material in PV cell conducts electricity better than an insulator.
To learn more about Solar Cells,
brainly.com/question/28843907
#SPJ1
A sample of gas has a volume of 2.50 L at 536 kPa and 75.0 °C. What is the pressure (in atm) of the gas if it expands to 3.75 L at 25.0 °C?
Answer:
P₂ = 1.18 atm
Explanation:
To find the final pressure, you need to use the Combined Gas Law equation:
[tex]\frac{P_1V_1}{T_1} =\frac{P_2V_2}{T_2}[/tex]
In this equation, "P₁", "V₁", and "T₁" represent the initial pressure, volume, and temperature. "P₂", "V₂", and "T₂" represent the final pressure, volume, and temperature. After plugging the given variables into the equation, you can simplify/rearrange the equation to solve for "P₂".
P₁ = 536 pKa P₂ = ? pKa
V₁ = 2.50 L V₂ = 3.75 L
T₁ = 75.0 °C T₂ = 25.0 °C
[tex]\frac{P_1V_1}{T_1} =\frac{P_2V_2}{T_2}[/tex] <----- Combined Gas Law
[tex]\frac{(536 pKa)(2.50L)}{75.0^oC} =\frac{P_2(3.75 L)}{25.0^oC}[/tex] <----- Insert variables
[tex]17.87 =\frac{P_2(3.75 L)}{25.0^oC}[/tex] <----- Simplify left side
[tex]446.7 = P_2(3.75 L)[/tex] <----- Multiply both sides by 25.0
[tex]119 = P_2[/tex] <----- Divide both sides by 3.75
Finally, you need to convert the pressure from kilopascals (pKa) to atmospheres (atm).
101.3 pKa = 1 atm
119 pKa 1 atm
--------------- x -------------------- = 1.18 atm
101.3 pKa
Ideal gas law is valid only for ideal gas not for vanderwaal gas. Combined Boyle's and Charles' gas law is used here. Therefore the new pressure of gas is 1.18 atm.
What is ideal gas equation?Ideal gas equation is the mathematical expression that relates pressure volume and temperature.
Mathematically the relation between Pressure, volume and temperature can be given as
PV=nRT
where,
P = pressure of gas
V= volume of gas
n =number of moles of gas
T =temperature of gas
R = Gas constant = 0.0821 L.atm/K.mol
Combining Boyle's and Charles' gas law
P₁V₁/T₁ = P₂V₂/T₂
{ (5.28atm) (2.50 L)} ÷348 K ={ (P2) (3.75 L)} ÷298 K
P2 =1.18 atm
Therefore the new pressure of gas is 1.18 atm when the temperature is changed to348K and volume is increased to 3.75 L.
To learn more about ideal gas equation, here:
https://brainly.com/question/14826347
#SPJ2
Because you want to study how botulinum toxin works, but you do not want to paralyze an animal, you decide to determine the effect of botulinum toxin on yeast. Botulinum toxin has a MW= 149323.05 and you have a 5ml stock bottle that contains 70% w/v botulinum toxin, 50mL of yeast growing in a liquid culture, and 25ml H2O. Your lab protocol performs treatments in 500µL samples.
The effect of botulinum toxin cannot be determined using a yeast.
Botulinum toxin is produced by the bacterium called Clostridium botulinum. It is a neurotoxin that affects the nervous system. It is done by inhibiting a chemical called as acetylcholine.
Acetylcholine is a neurotransmitter that carries the message from the brain. It relays the message thus resulting in movement. If it is inhibited, the person would be paralyzed.
Yeast is a single-celled organism. It does not have well-developed systems as in multicellular organisms. In addition to that, the test organisms used to measure the effect of toxicity should be similar genetically to humans which would result in higher efficiency.
Thus, yeast cannot be used to determine the effect of botulinum toxin
To know more about Yeast
https://brainly.com/question/14117480
#SPJ1
30cm3 of 0.1m HCl (aq) were titrated against 25cm3 of a solution containing 15.0g/dm3 of a mixture of NaCl and KHCl and KHCO3.
1.Calculate concentration of KHCO3 in mol/dm3
2.Mass of KHCO3 in g/dm3
3.Percentage Purity of KHCO3
Titration is a common laboratory method for quantitative chemical analysis to determine the concentration of an identified analyte. The reagent, sometimes referred to as the titrant or titrator, is prepared as a standard solution with a specified concentration and volume.
Titration is the continuous addition of one solution with a known concentration (referred to as a titrant) to a known volume of another solution with an unknown concentration when a reaction reaches neutrality, which is occasionally marked by a color change.
Utilizing methyl orange indicator, a sodium carbonate solution and a hydrochloric acid solution can be titrated. The solution will be mildly acidic at the end point when a weak base is titrated with a strong acid. The solution becomes slightly basic when a weak acid is titrated with a strong base because the salt that results will partially hydrolyze.
Below is a list of the chemical processes that took place during this titration.
NaCl(aq) + CO2(g) + H2O → Na2CO3(aq) + 2HCl(aq)
CO2(g) + H2O → CO32-(aq) + 2H+(aq)
Acid and base titrations have an end point when the acid and base amounts are chemically identical. When a strong acid and a strong base are titrated, the solution neutralizes at the end point.
To know more about titration, click on the link below:
https://brainly.com/question/11522314
#SPJ9
I need help with this homework assignment problem
The chemical symbol for the ion will be [tex]Ar^2^+[/tex]
The ion has a total of 16 electrons
The ion has a total of zero 3d electrons
Electron configurationsThe atom in question is a cation with a charge of +2.
The electron configuration goes thus: [tex]1s^2, 2s^2, 2p^6, 3s^2, 3p^4[/tex]
The total number of electrons of the ion of the atom can be calculated as:
2+2+6++2+4 = 16
With a charge of +2, it means two electrons have been lost. The total number of electrons in the atom would be:
16 + 2 = 18.
The symbol of an atom of a neutral element with 18 electrons is Ar. A neutral atom will have an equal number of protons and electrons. The number of protons in an atom is equivalent to the atomic number.
Thus, the atom is Argon with the symbol Ar.
The chemical symbol for the ion would, therefore, be [tex]Ar^2^+[/tex]
From the electron configuration, the ion has no 3d electrons. In other words, there are zero 3d electrons in the ion.
More on electron configurations can be found here: https://brainly.com/question/14283892
#SPJ1
Sergeant Jeffers likes to use a photo array when he is conducting an investigation. Because of this, what is he MOST likely to do in his current case?
A.
He uses a 35mm camera, a digital camera, and a video camera at the scene.
B.
He takes photos of every piece of evidence before it is sent to the lab.
C.
He has a sketch artist draw the subject based on descriptions.
D.
He asks eyewitnesses to pick out the subject from many options.
He takes photos of every piece of evidence before it is sent to the lab is what Sergeant Jeffers who likes photo array will do in this case and is denoted as option B.
What is Investigation?This is defined as the process in which something is examined and it is usually accompanied with thorough search for facts so as to get accurate and meaningful results.
The use of photo arrays for investigation means that photos of every piece of evidence is taken which is worked on by the professional through series of techniques so as to catch the culprit and ensure justice is served.
Read more about Investigation here https://brainly.com/question/25578076
#SPJ1
Now we will examine a more complex system. Watch the animation portraying the combustion of propane. The unbalanced chemical equation is given below.
__ C3H8(g) + __O2(g) → __CO2(g) + __H2O(ℓ)
Begin by balancing an element that appears in the fewest different formulas. What coefficient must be added to the CO2 to balance the element C?
By balancing the element that appears in the fewest different formulas of the combustion reaction of propane, the coefficient that must be added to the CO₂ to balance the element C is 3.
What is a combustion reaction?A combustion reaction is a reaction that involves the release of large amounts of heat and light energy.
Combustion reactions include the burning of hydrocarbons in the air to produce carbon dioxide and water.
Considering the given question below:
What is the balanced equation of the reaction for the combustion of propane?
The balanced equation of the reaction for the combustion of propane is given below as follows:
C₃H₈ (g) + 5 O₂ (g) ---> 3 CO₂ (g) + 4 H₂O (l)
Learn more about combustion reactions at: https://brainly.com/question/9425444
#SPJ1
List four types of observations that indicate when a chemical change has occurred.
Four types of observations that indicates occurring of a chemical change are -
Change in ColorExothermic reaction - Large amount of heat is given offPrecipitation reaction - Precipitate is formedRelease of gas - Gas is given off when chemical change occursWhen a chemical change occurs, color of the product is changed. Chemical change is an irreversible change. It cannot be undone as physical change.
A chemical change is an exothermic reaction. A large amount of heat is released when a chemical change occur. As the product formed in a chemical change is changed in its state, color, etc. which requires a large amount of heat.
Precipitate formation occurs in a chemical change as chemical change occurs in aqueous solution where two ionic bonds combine and forms insoluble salt called precipitate.
A chemical reaction releases off a gas. An example is reaction of baking soda and lemon juice. It releases carbon dioxide gas.
To learn more about chemical changes,
brainly.com/question/15606462
#SPJ1
1. What is the [H3O+] of 0.145M HNO2 ? Assume that the Ka=7.2x10^−4 at 25 ∘C .
Express your answer using two significant figures.
2. What is the pH of 0.145M HNO2 ?
Express your answer using two decimal places.
The concentration of the oxonim ion is 0.0099 M while the pH of the solution is 2.
What is the Ka?The term Ka means the acid dissociation constant. This speaks of the extent to which the acid is able to become dissociated in water. We know that is an acid is able to dissociate completely in water then the acid is a strong acid. However, if the acid is not able to dissociate complete in solution then the acid is a weak acid.
We can now set up the ICE table as we would show below;
HNO2(aq) + H2O (l) ⇔ H3O^+(aq) + NO2^-(aq)
I 0.145 0 0
C -x +x +x
E 0.145 - x x x
Ka = 7.2x10^−4
Ka = [H3O^+] [NO2^-]/[ HNO2]
7.2x10^−4 = x^2/0.145 - x
7.2x10^−4(0.145 - x) = x^2
1.044 * 10^-4 - 7.2x10^−4x = x^2
x^2 + 7.2 * 10^-4x - 1.044 * 10^-4 = 0
x=0.0099 M
Then we know that [H3O^+] = [NO2^-]
Thus;
pH = - log( [H3O^+])
pH = - log(0.0099 M)
pH = 2
Learn more about pH:https://brainly.com/question/15289741
#SPJ1
In the following acid-base reaction,H₂PO₄⁻ is theH₂PO₄⁻ (aq) + NH₃ (aq) ---> HPO₄²⁻ (aq) + NH₄⁺ (aq)a) conjugate acidb) acidc) base
Explanation:
H₂PO₄⁻ (aq) + NH₃ (aq) ---> HPO₄²⁻ (aq) + NH₄⁺ (aq)
acid base conjugate base conjugate acid
H₂PO₄⁻ is donating a proton to NH₃. So H₂PO₄⁻ is acting like an acid, and NH₃ is acting as the base. Then, HPO₄²⁻ is the conjugate base of H₂PO₄⁻ and NH₄⁺ is the conjugate acid of NH₃.
Answer: b) acid
24. Which of the following is an example of homozygous pure recessive?
A. TT
B. tt
C. Tt
D. Tall
TT is an example of homozygous pure recessive.
An homozygous trait is what?When the gene pairs (sometimes referred to as alleles) that regulate a trait's development are identical, the trait is said to be homozygous. Being heterozygous for a trait means having multiple alleles for that trait. A homozygous trait will always show itself in the same way.
Is TT homozygous and recessive?An organism could be homozygous dominant (TT) or homozygous recessive (RR) ( tt ). When an organism has two separate alleles (Tt) for the same gene, it is said to be heterozygous (hetero- means different).
To learn more about Traits click on the link below:
https://brainly.com/question/26434916
#SPJ9
True or false. An ion is an electrically neutral atom that has the same number of protons and neutrons
Answer:
False
Explanation:
Atoms are neutral Ions carry a charge. Take a look at the groups in the periodic table for extra help in understanding this.
What does it mean it for a solution to be supersaturated?
O A. The maximum amount of solute has been dissolved.
O B. More solute can still be dissolved in the solvent.
O C. More solute has dissolved than should be possible.
D. The dissolving speed was increased thtough heating.
A solution to be supersaturated means more solute can still be dissolved in the solvent.
What does a solution being supersaturated mean?A solution is said to be supersaturated if it contains more solute than can effectively dissolve at a certain temperature. The injection of a tiny crystal of solute, known as a seed crystal, can start the recrystallization of the excess dissolved solute in a supersaturated solution.
What does saturated vs supersaturated mean?A saturated solution is one that has dissolved the most solute possible at the temperature specified. A supersaturated solution is one that contains more solute than is necessary to reach saturation.
To know more about saturation :
https://brainly.com/question/28215821
#SPJ9
Multiply 643.78 quarts by 4.3562. What is the answer in the correct significant figures?
Calculated with significant figures is 2804.4, which contains 5 sig figs and 1 decimal.
Three rules are used to determine the number of significant digits Non-zero numbers are always valid. All zeros between two significant digits are valid. Only trailing zeros or trailing zeros in the fractional part are significant. Enter a number or formula to calculate the number of digits and decimal places in your answer. contains 1 significant digit.
All zeros between two non-zero digits are valid. For example, 108.0097 contains 7 significant digits. Zeros to the right of the decimal point and to the left of non-zero digits have no meaning. For example, 0.00798 contained 3 significant digits. For example, the 3-digit power of 20,499 is 20,500. The first digit to round down is 9 so round up. 0.0020499 to 3 significant digits are 0.
Learn more about Significant figure here:-https://brainly.com/question/24491627
#SPJ1
Question 10 of 40
At equilibrium, a reaction vessel contains 4.50 atm of Br2 and 1.10 atm
of NBr3. According to the reaction: 2 NBr3 (g) = N2 (g) + 3 Br₂ (g) Kp = 4.8
Determine the equilibrium partial pressure of N2.
The equilibrium partial pressure of Nitrogen would be 0.0638 atm when a reaction vessel contains 4.5 atm of Br2 and 1.1 atm of NBr3.
What is equilibrium and equilibrium partial pressure and how it comes out to be 0.0638 atm for Nitrogen?As always studied in earlier classes equilibrium is a state of equality between the reactant and product .Equilibrium is a condition where the rate of formation of reactant is equal to the rate of formation of product.Partial pressure is the pressure exerted by individual molecule of the container contained gas.The total pressure is the total pressure exerted by total molecules of the container.Here Kp= P N2 x( P Br 2 )^3/ p ( NBr3) ^2, 4.8 = ( PN2) (4.50)^3/(1.10)^2 , 5.8.8 = 91.125 ( PN2) = 0.0638 atm.To know more about equilibrium pressure visit:
https://brainly.com/question/17049019
#SPJ13