Which option explains the benefit of a newly designed fluid power system in the following scenario? A new fluid power rail system is being designed to travel across a large expanse of China. The new system will have a state-of-the-art hydraulic power system. The new fluid power system will have microstructures in the inner tubing to decrease friction and allow for more efficient dispersion of the fluid. The new fluid power system will have microstructures in the inner tubing to decrease friction and allow for more efficient dispersion of the fluid. The new fluid power system will have microstructures in the inner tubing to increase friction and allow for more efficient dispersion of the fluid. The new fluid power system will have microstructures in the inner tubing to increase friction and allow for more efficient dispersion of the fluid. The new fluid power system will have smooth surfaces to decrease friction and allow for more efficient dispersion of the fluid. The new fluid power system will have smooth surfaces to decrease friction and allow for more efficient dispersion of the fluid. The new fluid power system will have smooth surfaces to increase friction and allow for more efficient dispersion of the fluid.

Answer:

socket wrench or ratchet wrench

Explanation:

..........23÷357=0.0644257703........

Answer:

You would have to use a chisel.

.Explanation:.

.

Answer:

  any of AND, NOR, XOR

Explanation:

An AND gate will give a Low output for any input Low. The logic circuit could be an AND gate.

A NOR gate will give a Low output for any input High. The logic circuit could be a NOR gate.

An XOR gate will give a Low output for an even number of High inputs. The logic circuit could be an XOR gate.

The logic circuit could be any of ...

  AND or NOR or XOR

__

Additional comment

What you consider a "basic" gate is not defined here. All of these are catalog items. If you consider only AND, OR, and NOT to be the basic gates, then your answer is AND.

Answer:

Encryption enhances the security of a message or file by scrambling the content. To encrypt a message, you need the right key, and you need the right key to decrypt it as well.It is the most effective way to hide communication via encoded information where the sender and the recipient hold the key to decipher data.

Answer:

thrust angle

Explanation:

good luck.........

First, the 'power unit' or 'tractor' in trucking refers to the head of a truck, i.e., the engine and driver's cab. The tractor is used to pull the second main part, which is the trailer, a sort of box on wheels in which the cargo is placed.

Answer:

true

Explanation:

Answer:

Numerals

Dimensions

Extension Lines

Arrowheads

Dimension Figures

Isometric Dimensioning

Orthographic Dimensioning

If a drawing is to be complete, so that the object represented by the drawing can be made as intended by the designer, it must tell two complete stories. It tells this with views, which describe the shape of the object, and with dimensions and notes, which give sizes and other information needed to make the object.

Therefore, your next step is to learn the basics of dimensioning. In that way, you will understand not only how to interpret a drawing to get the information you need, but also how to dimension your sketches so that they can be used to communicate size information to others.

Numerals

It may seem a bit basic, but a few exercises with the shapes of numbers come before dimensioning. The reason for such a review is simply that incorrectly or carelessly made numbers on a drawing or sketch can easily be misinterpreted by someone on the job. That can be costly.

Therefore, the study of numbers forms is justified.

The number forms presented here have been determined to be the most legible, and are used by industry nationwide. The United States standardized 1/8” vertical

Explanation:

It is best to organize dimensions for easy reading. The drawing should have constant distances between dimension lines. If clarity cannot be achieved, avoid dimensioning inside objects or having the dimension line touch them.

There are two categories of dimensions: size dimensions and location dimensions.

The measures for the size of features and objects are provided by size dimensions. To locate features and objects, location dimensions are utilized. Drawings may also contain notes.

A measurement is referred to as a Size Dimension if it represents an object's size. A measurement is referred to as a Location Dimension if it represents an object's location.

This method is known as the Unidirectional Method if the dimension is written in the same direction throughout the entire drawing.

Therefore, When the same type of arc is used in more than one place,  numerals  note is included with the dimension.

Learn more about dimension here:

https://brainly.com/question/28688567

#SPJ2

The Digital Processing is not part of the OBD II implementation.

OBD II is known to be a kind of acronym for On-Board Diagnostic II. This is known to be the second generation of on-board self-diagnostic equipment that is needed for light- and medium-duty California vehicles.

The OBD-II is said to be a kind of on-board computer that handles emissions, , speed, etc.

learn more about  OBD II implementation from

https://brainly.com/question/14281435

To archive a concentration of 40%, you need to add 62.5 kg of salt.

First, we have 150kg of aqueous salt solution with a concentration of the 15%, which means that the 15% of 150kg is salt, so we have:

0.15*150kg = 22.5 kg of salt.

Now we want to add a quantity M of salt, such that the new concentration of salt is of 40%.

The new mass of the mixture will be:

150kg + M

The new mass of salt will be:

22.5kg + M

The concentration of salt, in decimal form, will be:

(22.5kg + M)/(150kg + M)

The above quotient must be equal to 0.4 (40% in decimal form), then we solve:

(22.5kg + M)/(150kg + M) = 0.4

(22.5kg + M) = 0.4*(150kg + M)

(22.5kg + M) = 60kg + 0.4*M

M - 0.4*M = 60kg - 22.5kg

0.6*M = 37.5kg

M = (37.5 kg)/0.6 = 62.5kg

So you need to add 62.5kg of salt.

If you want to learn more about concentrations, you can read:

https://brainly.in/question/14278665

Answer:

To read electrical blueprints one must understand the flow of the circuit, identify critical nodes, understand Ohm’s Law, [ and have a deep comprehension of the National Electrical Code. ]

Explanation:

Answer:

In 1st class levers, the fulcrum is always between the effort force and the load. It may or may not provide a mechanical advantage, depending on the location.

Explanation:

Brake housing and lining is the answer I guess :'

The examples of engineering controls is Biohazard waste containers and Spill clean up kits.

An engineering controls is a workplace process that protect workers by removing hazardous conditions or by placing a barrier between the worker and the hazard.

An example of engineering controls is installation of exhaust ventilation to remove airborne emissions to shield the worker.

Hence, the examples of engineering controls is Biohazard waste containers and Spill clean up kits.

Therefore, the Option C and D is correct.

Read more about engineering controls

brainly.com/question/17483083

The total rate of energy emission is 2786.9 W.

Radiation is a type of heat transfer where the heat energy is conveyed from photons or electromagnetic waves.  The rate of energy emission can be calculated multiplying the Stefan–Boltzmann law (σ[tex]*T^4[/tex]) by area (A). Therefore, you have:

Total Rate of Energy Emission (E)= σ[tex]*A*T^4[/tex], where:

σ = Stefan–Boltzmann constant = [tex]5.67*10^{-8}[/tex] [tex]\frac{W}{m^2K^4}[/tex]

A= area

T=temperature (K)

For solving this exercise, you should apply this formula. For your question:

σ = Stefan–Boltzmann constant = [tex]5.67*10^{-8}[/tex] [tex]\frac{W}{m^2K^4}[/tex]

A= 0.12 m²

T=527+273=800 K

Thus, the Total Rate of Energy Emission (E) will be:

E=σ[tex]*A*T^4[/tex]

[tex]E=(5.67*10^{-8}\frac{W}{m^2K^4})*(0.12*m^{2} )*(800K)\\ \\ E=2786.9 W[/tex]

Read more about radiation heat transfer about:

https://brainly.com/question/16191304

Answer:

  Vab = 80V

Explanation:

The only current flowing in the circuit is supplied by the 100 V source. Its only load is the 40+60 ohm series circuit attached, so the current in that loop is (100V)/(40+60Ω) = 1A. That means V1 = (1A)(60Ω) = 60V.

Vab will be the sum of voltages around the right-side "loop" between terminals 'a' and 'b'. It is (working clockwise from terminal 'b') ...

  Vab = -10V +60V +(0A×10Ω) +30V

  Vab = 80V

Answer:

A

Explanation:

Answer:

"cool"

Explanation:

Answer:

I agree

Explanation:

Answer:

AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA

funny question of no reason but k

Explanation:

The turbine engine described above is a Single-entry Centrifugal Compressor.

Also known as a Single-Stage Centrifugal compressor, this type of engine combines one impeller with an inlet guide vane that is associated and a diffuser.

It is used for increasing the kinetic energy of the gas with a high-speed impeller. This energy is then converted into heightened pressure within the diffuser. The correct answer, thus, is A.

In order words, they are used for compressing large volumes of gas into small pressures.

See the link below for more about turbine engines:

https://brainly.com/question/894340

Answer:

abrir candados y abrir puertas

Explanation:

Answer:

The answer is V = √2FD ÷ CD × PA

Explanation:

FD = CD × PV²A ÷ 2

V² = 2FD ÷ CD × PA

V = √2FD ÷ CD × PA

Thus, The value of V is V = √2FD ÷ CD × PA

-TheUnknownScientist 72

Explanation:

Structure controls the major elements of a story, including plot, characters, setting, and theme. ... In this, we see the plot introduced, a crisis or complication, and a resolution. The structure affects the meaning of the story by organizing the theme of the writing.

We have that the rate at which the concentrated sugar solution be added is mathematically given as

A=36.93kg/min

Question Parameters:

Orange juice flowing through a pipe at a rate of 40 kg/min is sweetened by adding concentrated sugar solution (25 % sugar) to the pipe line at constant rate.

Generally the equation for the Over balance  is mathematically given as

A+40=B

Salt balance

A(0.25)=B(0.12)

A(2.083)=B

Hence

A+40=A(2.083)

A=40/1.083

A=36.93kg/min

For more information on Concentration

https://brainly.com/question/16979235