Answer:
B & C
Explanation:
RA is basically the time and longitude coordinates, and dec. is N/S coordinates.
Which if the following is the most commercially successful fiber, responsible for about half of all fiber production in the world? *
1 point
Cotton
Rayon
Silk
Polyester
Answer:
The correct answer is - polyester.
Explanation:
Polyester is a synthetic, petroleum-based fiber that is used more than any other fiber due to its cost-effectiveness, easy to produce, and able to spun together with other natural and synthetic fibers like cotton, silk, and rayon.
Polyester is the commercially most successful fiber as it has more than 51 percent market share approximately which is more than any other fiber and produced more than half of all fibers.
I'm just not quite sure.
Answer:
Answer is option (c) because after meiosis cell possess only ones set of chromosome i.e (n)...... 23 chromosome......
HURRY PLEASE I NEED A PARAGRAPH. Describe how cell membranes are selectively permeable.
Explanation:
Cell membranes are selectively permeable. Some solutes cross the membrane freely, some cross with assistance, and others do not cross at all. A few lipophilic substances move freely across the cell membrane by passive diffusion. ... Large molecules do not cross intact cell membranes, except in certain special cases.
which of these factors will affect a population regardless of the populations density ? PLEASE HELP
Answer:
Density independent factors affect populations regardless of their size. Examples are winter, drought, forest fires. These factors are mostly abiotic (non-living). Predation affects population size.
disease
The factors that will affect a population regardless of population density is flooding. The correct option is C.
What is population?A population is the entire group about which you want to draw conclusions. A sample is the specific group from which you will collect data.
The sample size is always less than the total population size. A population for this research does not necessarily refer to people.
A population is a subset of individuals from one species that live in a specific geographic area and interbreed in reproducing species. Some species' geographic boundaries are easy to establish, while others are more difficult.
Population change is influenced by three factors: birth rate, death rate, and migration. Though one or two of these factors may have an impact on a population in a specific area, all three have an impact on population change.
Thus, the correct option is C as the population can be get affected by flooding without regarding their density.
For more details regarding population, visit:
https://brainly.com/question/27991860
#SPJ2
How is Sexual Reproduction is more successful than sexual reproduction
Answer:
The offspring of sexually reproducing organisms are all genetically unique. Because of this, sexually reproducing organisms may have more successful survival of offspring in environments that change than asexually reproducing organisms, whose offspring are all genetically identical.
Explanation:
Looked it up. I'm sorry if it's wrong.
Please answer ASAP! 50 points
Assuming that species 1 is the ancestral species of the group,
(a) What type of mutation do you observe in species III? (1pt)
(b) A change in DNA may cause a change in the protein coded by that specific DNA. Give the main steps of transcription (make sure to mention the antisense strand and the enzyme involved) (3 pts)
(c) In Eukaryotes, the molecule produced by DNA must be modified in order to leave the nucleus. Explain TWO of those modifications. (2 pts)
What process is the fastest at releasing oxygen into the atmosphere
Answer:
i believe it would be photosynthesis
Explanation:
Describe skin cells and their function
A biome is defined by four characteristics
Answer:
Biomes contain many ecosytems within the same area. Land-based biomes are called terrestrial biomes. Water-based biomes are called aquatic biomes. Temperatures, precipitation amounts and prevalent organisms characterized the biomes of the world.
Explanation:
Which of the following is NOT an example of mechanical weathering?
A.A large rock splits due to ice wedging.
B.Oxidation causes rust on the rock.
C.Moving water causes abrasion as rocks collide with one another and break apart.
D.Plant roots grow in the crack of a rock.
Which statement best summarizes how the light-dependent reactions and light-independent reactions (Calvin cycle) work together during photosynthesis
The light-dependent reactions capture energy and the light-independent reactions use that energy to make glucose
The light-dependent reactions capture energy and the light-independent reactions use that energy to make ATP
The light-dependent reactions take in glucose (food energy) and the light-independent reactions use the glucose to make ATP
The light-dependent reactions capture bees and the light-independent reactions blend those bees up into golden cheddar mac and cheese... watch
out for the stingers though
The light-dependent reactions take in glucose (food energy) and the light-independent reactions use the glucose to make energy in the form of
sunlight
The light-dependent reactions capture energy and the light-independent reactions use that energy to make glucose
The energy captured in the light-dependent reactions is stored in ATP and NADPH and is used in Calvin's cycle to fixateCO2 in order to synthesize glucose
Some organisms consist of one cell. Other organisms consist of multiple cells. Which of the following is true of cells in a multicellular organism?
All cells have the same function.
Every cell has a different function.
Different types of cells have the same function.
Different types of cells have different functions.
Which statement describes how heat flows from the coffee to the part of the spoon in the coffee?
Heat flows from the coffee to the spoon through radiation.
Heat flows from the coffee to the spoon through convection.
Heat flows from the coffee to the spoon through conduction.
Heat flows from the coffee to the spoon through radiation, convection, and conduction.
Answer:
C. Heat flows from the coffee to the spoon through conduction.
The heat movement known to move from one area to elsewhere has been called heat transfer. Thermal conduction allows the coffee's heat to reach the spoon. Thus, option C is correct.
What is thermal conduction?A type of heat transfer called thermal conduction occurs when heat flows from one spot to some other place due to the disparity in temperatures between the bodies.
When a body is subjected to thermal conduction, heat energy is dissipated from the body towards the colder or less heated objects. Because the spoon and coffee are at different temperatures, the heat from the coffee is passed to the spoon through conduction.
Therefore, thermal conduction is the process through which the coffee heats the spoon in the cup.
Learn more about thermal conduction here:
https://brainly.com/question/16416512
#SPJ2
The evolution of new organs usually builds on preexisting structures that are modified in form and sometimes function. The embryos of fish, amphibians, reptiles, birds, and mammals all have pharyngeal pouches or gill slits. These pouches develop into gills in adult fish and they are used to absorb oxygen from their watery environment. These same pouches become parts of the in_________ humans.
a) eyes and lungs
b) ear and throat
c) eyes and nose
d) lungs and heart
Answer:
lungs and heart
Explanation:
lungs and heart is the answer because human lungs is use for gas exchange during respiration or while you breathe. When humans breathe, the lungs absorb oxygen from the inhaled sir into the blood and carbondioxide leaves the blood when we breathe out. The heart pumps the blood, and oxygenated blood are carried in the blood when air is inhaled and carbondioxide leaves the blood when you exhale. The blood carries nutrients and oxygenated blood. Therefore, lungs and heart work hand in hand in absorbtion of oxygen from it's environment.
Provide an
example of how energy from the sun affects patterns of movement in the ocean.
Answer:
The sun's heat evaporates some water and raises the concentration of the salt, causing the water to be more dense. Or it could be the gravitational pull of the sun from Earth, just like how the moon affects tides. I hope this helps you :)
Explanation:
What is a way that society controls science?
Answer:
I think it's D. Governments give research funding.
Who was one of the first people to identify and observe cells from cork?
Answer:
The first person to observe cells was Robert Hooke. Hooke was an English scientist. He used a compound microscope to look at thin slices of cork.
Explanation:
Sorry if I am wrong let me know if I am.
HELP ASAP
What is the main part of the cells of a plant that contributes to it being an autotroph?
A . ribosomes
B . chloroplasts
C . vacuoles
D . mitochondria
Autotroph means that it can create it's own food and get the energy from other sources (like eating things)
The thing that makes plants autotrophs are chloroplasts.
So the answer is: B
What part of a tree conducts electricity when hit by lightning?
Answer:
In most trees, the area just under the bark layer contains moisture in the form of sap and water. And since water is a better electrical conductor than wood, lightning striking a tree tends to travel just underneath the bark.
What are groups of great white sharks believed to have established
Answer:
Mackerel sharks
Explanation:
Answer:
dominance hierarchies
Explanation:
how does an organism reproduce by budding
The chemical equation of cellular respiration contains information about?
a. the relative amount of products and reactants.
b. the formation of glucose.
c. the intermediate reactions needed to break down glucose.
d. the environment in which cellular respiration occurs.
The chemical equation of cellular respiration comprises information regarding the relative amounts of products and reactants.
• The process, which takes place within the mitochondria of all the organisms is termed cellular respiration. In this process, the simple sugars are dissociated into water and carbon dioxide and release energy in the form of ATP.
• A chemical reaction is a procedure in which one or more components, that is, the reactants get transformed into one or more different components called the products.
• The substances, which start the reaction are called reactants, while the ones that get produced in the reaction are called products.
• The association between the reactants and products in a chemical reaction can be signified with the help of a chemical equation.
Thus, the chemical reaction of cellular respiration comprises information regarding the relative amount of products and reactants.
To know more about:
https://brainly.com/question/425991
6. Which of the following is NOT a characteristic of metallic substances?
A. Are malleable and ductile
B. Conduct electricity
C. Have low melting points
I
D. Are usually solids are room temperature
Answer: C. Have low melting points.
Explanation: Metals have high melting points, not low; therefore, C does not belong.
Cells in one type of body tissue are identical to cells in other types.
Agree or disagree?
Can someone help me plz ! I’ll cash app
list two examples of temporary change in human
Answer:
#IN GIRLS
* adolsence
* menstruation
#IN BOYS
* penis strts turning big
*beard starts coming of face
Answer:
Changes in humans
Explanation:
Girls develop breast and start their period.
Where as boys develop a deeper voice and facial hair will start to appear.
4 substances containing nitrogen or phosphorous that are related to biological processes
Answer:
DNA, RNA, ATP, and the phospholipids that form all cell membranes
Explanation:
Distinguish the types of forgetting: anterograde amnesia, retrograde amnesia, encoding failure, retrieval failure, and interference (both retroactive and proactive).
Answer:
Anterograde amnesia is the inability to create new memories after the onset of amnesia, while memories from before the event remain intact. Brain regions related to this condition include the medial temporal lobe, medial diencephalon, and hippocampus. Anterograde amnesia can be caused by the effects of long-term alcoholism, severe malnutrition, stroke, head trauma, surgery, Wernicke-Korsakoff syndrome, cerebrovascular events, anoxia, or other trauma. Retrograde amnesia is the inability to recall memories made before the onset of amnesia. Retrograde amnesia is usually caused by head trauma or brain damage to parts of the brain other than the hippocampus (which is involved with the encoding process of new memories). Brain damage causing retrograde amnesia can be as varied as a cerebrovascular accident, stroke, tumor, hypoxia, encephalitis, or chronic alcoholism. The there is encoding failure. Encoding is the process of converting sensory input into a form able to be processed and stored in the memory. However, this process can be impacted by a number of factors, and how well information is encoded affects how well it is able to be recalled later. On the other hand, retrieval failure is the failure to recall information in the absence of memory cues. Proactive interference occurs when old memories hinder the ability to make new memories. In this type of interference, old information inhibits the ability to remember new information, such as when outdated scientific facts interfere with the ability to remember updated facts. This often occurs when memories are learned in similar contexts, or regarding similar things. It’s when we have preconceived notions about situations and events, and apply them to current situations and events.Retroactive interference occurs when old memories are changed by new ones, sometimes so much that the original memory is forgotten. This is when newly learned information interferes with and impedes the recall of previously learned information. The ability to recall previously learned information is greatly reduced if that information is not utilized, and there is substantial new information being presented. This often occurs when hearing recent news figures, then trying to remember earlier facts and figures.
Explanation:
Found it on a similar question
Metamorphic rocks are a bit harder to identify because they can share traits with the other rock types. Again, thinking about the formation process can help. Metamorphic rocks have been heated and squashed. This can lead the minerals in them to line up, creating ribbon-like layers called bands. These rocks are called foliated metamorphic rocks. You can see these bands in gneiss. If a metamorphic rock has fossils, you know it was formed from a sedimentary rock. Because of the heat and pressure, the fossil will be hard to recognize and out of shape.
Which of the following best describes foliated metamorphic rocks?
A
There are easily recognizable fossils.
B
The rock has ribbon-like layers of bands.
C
They have crystals like igneous rocks.
D
Different sized sediments can be see
Answer:
b
Explanation:
the fourth sentence in the passage: "This can lead the minerals in them to line up, creating ribbon-like layers called bands."
Dark and light bands may alternate due to the separation of mafic (dark) and felsic (light) minerals. Having different grain sizes in the same mineral can also result in banding. Thus, option B is correct.
What are the ribbon layer present in the rock?Under the surface of the earth, metamorphic rocks are formed. The extreme heat and pressure cause them to alter. Their layers resemble ribbons. Some of them are covered in bright crystals.
Under the earth's surface, metamorphic rocks are created as a result of the transformation brought on by extreme heat and pressure (squeezing).
These processes produce rocks that frequently have layers that resemble ribbons and may have glittering crystals on their surface that were created by minerals slowly growing over time.
Therefore, This can lead the minerals in them to line up, creating ribbon-like layers called bands
Learn more about rock here:
https://brainly.com/question/19679511
#SPJ6
Two parents, both with brown eyes, have four children. One child has brown eyes, like his parents, but the other three all have blue eyes. One of the children has been learning about genetics in science class and knows that brown eyes are dominant to blue eyes in humans. The student developed the following model of a Punnett square to predict the genotypes of his parents and his siblings.
Based on his model, the student claims that only one of the four children should have blue eyes. Which of the following explanations best describes why the Punnett square does not model the traits in the student’s family? (DOK 3)
Answer:
Punnett squares are not exact answers, they are only used to predict traits.
A.
The student is forgetting that a Punnett square is used to predict the outcomes of a genetic cross. The actual results do not always match up to the predicted outcomes.