Which planet is the farthest away from the Sun? Is this always true? Explain
your answer.

Answer:

the periodic table

Explanation:

Elements with similar properties are in columns called groups. Elements to the left of this line are metals. Elements in the same group of the periodic table have the same number of electrons in their outer shell. This gives them similar chemical properties.

Hope this helps!

The marginal density function of X and Y is 1 and thus they are probability density functions and the probability of the conditions in (c) and (d) is 0.2 and 0.8 respectively.

A probability is a number that expresses the likelihood or chance that a given event will occur. Probabilities can be stated as proportions ranging from 0 to 1, as well as percentages ranging from 0% to 100%.

A probability density function, also known as the density of a continuous random variable in probability theory, is a function whose value at each given sample in the sample space may be read as offering a relative likelihood that the random variable's value will be near to that sample. Probability density functions are statistical measures that are used to predict the outcome of a discrete value. The probability density function is nonnegative all the way through, and the area under the entire curve is equal to one.

a) The marginal density of X is

[tex]f_X (x) = \int\limits^x_0 {f_{X,Y} (x,y)} \, dx = \int\limits^x_0 {2} \, dx = 2x[/tex]

If it is a pdf, then

[tex]\int\limits^1_0 {f_X(x)} \, dx = 1[/tex]

[tex]\int\limits^1_0 {2x} \, dx = x^2 |_0^1 = 1[/tex]

Since integral is 1, marginal density function of X is pdf.

b) The marginal density of Y is

[tex]f_Y (y) = \int\limits^y0 {f_{X,Y} (x,y)} \, dy = \int\limits^y_0 {2} \, dy = 2y[/tex]

If it is a pdf, then

[tex]\int\limits^1_0 {f_Y(y)} \, dy = 1[/tex]

[tex]\int\limits^1_0 {2y} \, dy = y^2 |_0^1 = 1[/tex]

Since integral is 1, marginal density function of Y is pdf.

c)

       [tex]P (x < 0.2,y > 0.5) = \int\limits^1_{0.5}\int\limits^{0.2}_0 {f_{X,Y} (x,y) \, dx \, dy = \int\limits^1_{0.5}\int\limits^{0.2}_0 2dxdy[/tex]

       [tex]= \int\limits^1_{0.5} [2x]_0^{0.2}dy = 0.4[y]_{0.5}^1 = 0.4 (1 - 0.5) = 0.2[/tex]

d)

      [tex]P (x < 0.8,y > 0.5) = \int\limits^1_{0.5}\int\limits^{0.8}_0 {f_{X,Y} (x,y) \, dx \, dy = \int\limits^1_{0.5}\int\limits^{0.8}_0 2dxdy[/tex]

      [tex]= \int\limits^1_{0.5} [2x]_0^{0.8}dy = 1.6[y]_{0.5}^1 = 1.6 (1 - 0.5) = 0.8[/tex]

The complete question is:

A chemical system that results from a chemical reaction has two important components in a blend among others. The joint distribution that describes the proportion X and Y of these two components is given by f(x,y) = 2 for 0 < x < y < 1 and f(x,y) = 0 otherwise. (a) Find the marginal density function of X and verify if it is a pdf. (b) Find the marginal density function of Y and verify if it is a pdf. (c) Find the probability that the component proportions produce results X < 0.2, Y > 0.5. (d) Find the probability that the component proportions produce results X < 0.8, Y > 0.5.

Learn more about Probability density functions here:

https://brainly.com/question/14410995

#SPJ4

When pressure is constant. Temperature and volume is directly proportional.

According to Gay-Law, Lussac's the pressure of a given amount of gas, while the volume is held constant, changes directly with the absolute temperature of the gas.

Since one mole of The any ideal gas is meant to be 22.4L at STP, the gay-Lussacs law holds true. The ratios of the number of moles of gases to one another should continue to be factors and multiples of one another since this changes directly with heat (and inverse with pressure), but operates the same for all gases.

Under circumstances of constant mass and volume, Gay-law, Lussac's also known as Amonton's law, asserts that the absolute pressure and temperature of an ideal gas are directly related.

learn more about  Gay-Law, Lussac's refer

https://brainly.com/question/24691513

#SPJ13

To neutralize hydrochloric acid (HCl, strong acid), students should Titrate a strong base into the strong acid.

HCL or hydrochloride acid is strong acid found in the digestive system of animals and humans , this acid in gut helps in break down of protein and absorb essential nutrients, and it helps to control viruses and bacteria that might infect the stomach. It is formed when hydrochloride gas mixes with the water.

A strong acid like HCL can be neutralize with a help of strong base like sodium hydroxide (NaOH). The reaction between sodium hydroxide (NaOH) and hydrochloric acid (HCl) is a neutralization reaction which results in the formation of a salt, sodium chloride (NaCl), and water (H2O).

To learn more about hydrochloride acid click here,

https://brainly.com/question/15806247

#SPJ1

The shortest wavelength emitted from the initial configuration of 6 d1 is 327 nm. Here the first energy level is 6 and the last level is infinity.

Wavelength is of a radiation is the distance travelled by a wave. As the wavelength of a wave gets smaller its energy increases.

The relation between wavelength and energy levels is given below:

[tex]\frac{1}{\lambda } = R [\frac{1}{n_{1}^{2}}-\frac{1}{n_{2}^{2}}][/tex]

here, R is a constant equal to 1.1 × 10⁷ and n₁ and n₂ are two energy level.

The smallest wavelength of light emitted from hydrogen with n₁ =6 and n₂ = ∞ can be calculated as follows:

[tex]\frac{1}{\lambda } = 1.1\times 10^{7} [\frac{1}{6^{2}}-\frac{1}{\infty ^{2}}] =30.5\times 10^{5} cm[/tex]

[tex]\lambda = \frac{1}{30.5\times 10^{5}}= 327 \textup{ nm}[/tex]

Hence, wavelength of the light emitted is 327 nm.

To find more about wavelength, refer the link below:

https://brainly.com/question/4112024

#SPJ1

Using the specific heat capacities of water and ice, and taking into account the latent heat of melting for ice, we can calculate that the final temperature of the mixture will be 17.6 °C.

The negative value of the amount of heat lost by liquid water is equal to the amount of heat absorbed by the ice. The equation for calculating the amount of heat needed to change the temperature of a material looks like this:

Q = (t₂ - t₁) * c * m

t₂ - final temperature

t₁ - starting temperature (32.1 °C for water, -20.0 °C for ice)

c - specific heat capacity (4.186 J/g°C for water, 2.108 J/g°C for ice)

m - the mass of the material (325 for water, 44.0 for ice)

In addition, we have to take into account that some of the heat released by water is expended on melting the ice:

heat used for melting = m * l = 44.0 g * 334 J/g = 14696 J

l = latent heat of melting ice

This means that the heat released by water is expended on heating ice to 0°C, then melting that ice, then heating the ice water to the final temperature.

Heat expended by water:

Q = (32.1 °C - X) * 325 g * 4.186 J/g°C = 43670.445 J - 1360.45 J/°C * X

Heat absorbed by ice and ice water:

Q = 20.0 °C * 44.0 g * 2.108 J/g°C + 14696 J + X * 44.0 g * 4.186 J/g°C = 16551.04 J + 184.184 J/°C * X

These amounts of heat are equal:

43670.445 J - 1360.45 J/°C * X = 16551.04 J + 184.184 J/°C * X

27119.405 J = 1544.634 J/°C * X

X = 27119.405 J / 1544.634 J/°C = 17.6 °C

You can learn more about specific heat capacity here:

brainly.com/question/28302909

#SPJ4

According to the given statement chemical reactions occur when atoms are rearranged in different combinations

The correct option is C.

The fact that Dalton's atomic theory does not break a number of fundamental rules of chemical combination, including the law of definite proportions, the law of multiple proportions, and the law of conservation of mass, is one of its most significant advantages.

To know more about Dalton's atomic theory visit:

https://brainly.com/question/11855975

#SPJ13

Answer:

gases have no definite volume and shape

The factors for dissolving sugar.

Warmth or Fahrenheit minus 0.2 ranges Celsius dissolves the sugar in water. because of sugar's soluble nature, it's miles present at any temperature or stress in liquid water. about 10 mins for this.

Sugar dissolves quicker in hot water than it does in bloodless water due to the fact warm water has extra strength than bloodless water. whilst water is heated, the molecules benefit energy and, therefore, pass quicker. As they flow faster, they come into contact with the sugar more often, inflicting them to dissolve more quickly.

The dissolution of sugar in water is a bodily change because it no longer brings about the formation of a new substance. it's miles a reversible alternative as sugar and water may be extracted and returned from the solution through the method of crystallization observed by evaporation.

Learn more about dissolving sugar here:-https://brainly.com/question/26239531

#SPJ1

The solubility in moles/liter for aluminum hydroxide at 25 degrees Celcius is  2.47×109 M

What is solubility?

The maximum amount of a substance that can be dissolved in a given volume of a solvent at a particular temperature is referred to as the substance's solubility. The solubility of a given solute-solvent combination is a quality that is unique to that combination; yet, the solubility of individual compounds can vary substantially.

Given that,

Temperature= 25 degrees Celcius

Ksp value= 1.0 X 10^-33

Al(OH)3(s) ==> Al3+(aq) + 3OH-(aq)

Ksp = [Al3+][OH-]3

Let x = [Al3+], then [OH-] = 3x

1.3x10-33 = (x)(3x)3

1.3x10-33 = 27x4

x4 = 4.8x10-35

x = 2.5X10-9 M = molar solubility of Al(OH)3

Hence, the answer rounded off to one decimal point since in decimal part .466 digits in 2nd and 3rd place (66) and greater than 50. the previous digit is converted to the next digit (4-5) Even if you want to give the answer up to two decimal points then the digit in 3rd place (6) is greater than (5) so the digit in 2nd decimal place converts to (67) the answer will be 2.47×109.

To learn more about the solubility the link is given below:

https://brainly.com/question/15891599?

#SPJ4

According to the Bronsted-Lowry concept, acids are proton donors and bases are proton acceptors. In this reaction, NH3 gains protons and H2O loses protons. NH3 is therefore a Bronsted-Lowry base.

NH3   +   H2O    ⇒   NH4+                            + OH-

Base       Acid       Conjugate acid       Conjugate base

A basic solution is formed when ammonia dissolves in water. A small amount of dissolved ammonia reacts with water to form ammonium hydroxide which dissociates into ammonium and hydroxide ions. All these processes are reversible. Hydrogen bonds are weak bonds that are easily broken to form H+ and OH ions. This reaction also has multiple reactants, but only one product.

Learn more about Substance classified here:-https://brainly.com/question/487243

#SPJ1

Answer:Atomic radius gets bigger

Explanation:

Atomic radius bigger because not only do the atoms have more and more protons and neutrons, and thus more mass in general, there is also stronger shielding affect. Shielding affect is when electrons closer to the nucleus block the positive charge from reaching electrons farther from the nucleus, and thus those far electrons are not drawn towards the nucleus as strongly, and spread out more, increasing atomic radius.

21.0 g of hydrogen is mixed with 7.0 g of nitrogen then the maximum mass of ammonia that can be produced from this reaction is 8.51gram.

Limiting agent is reactant in a reaction which is in smallest amount, that is totally consumed when a chemical reaction is completed

The balanced reaction is

[tex]N_{2}+3H_{2}\rightleftharpoons 2NH_{3}[/tex]

moles of nitrogen= 7.0÷28=0.25

moles of hydrogen=21.0÷2.016=10.41

To know the limiting reagent we have to divide moles by stoichiometry

0.25÷1=0.25

10.41÷3=3.47

0.25 is lesser than 3.47 so Nitrogen is limiting reagent so reaction will run according this only

1 Moles of nitrogen=2 mole of ammonia

0.25 mole of nitrogen = 2×0.25=0.5 mole of ammonia

mass of ammonia= 0.5mole×Molar mass of ammonia

                             = 0.5×17.031

                                =8.51g

Thus the mass of ammonia formed is 8.51g

TO know more about limiting reagent, here:

https://brainly.com/question/26905271

#SPJ1

In the titration of acetic acid and NaOH, the excess bases added in order to detect the indicator color change endpoint will cause the calculated and reported mass percent of acetic acid in vinegar to be too high because it is assumed more base has reacted other than has actually reacted.

An indicator is a substance that changes color as the pH of the solution in which it is present changes.

Indicators are usually solutions of weak organic acids or bases. Some examples of indicators are methyl orange, methyl red, phenolphthalein, etc.

In a titration experiment, the color changes that occur in an indicator indicate the endpoint or equivalent point of the reaction.

Some indicators produce a sharp color change at the endpoint of a titration, whereas others do not.

Indicators are chosen to produce a suitable sharp color change at the endpoint of a given reaction.

Learn more about indicators at: https://brainly.com/question/1918667

#SPJ1

Let's count the moles of gaseous oxygen first. Using n= m/M

=n(O)= 32.00/2×15.99)mol

= n(O)= (32.00/31.98) mol

=n(O)= 1.00mol

Let's now change every relevant value in the equation PV=nRT.

=P× 20.0L= 1.00mol× 0.0821[tex]L atm mol^{-1} K^{-1}[/tex]× 303.15K

= P× 20.0= 1.00× 0.0821atm× 303.15

[tex]P=(0.0821*300/20) atm[/tex]

P= 1.24atm

Therefore, 1.24 atm is the pressure that the oxygen gas is exerting.

The ideal gas equation is what.

The macroscopic characteristics of ideal gases are related by the ideal gas law (PV = nRT). A gas is said to be ideal if its particles don't interact with one another and don't occupy any space.

For more information about enthalpy change, visit-

https://brainly.com/question/14239793

#SPJ4

The reaction where electrons are removed from carbon initially present in glucose is the formation of Glyceraldehyde-3-phosphate and Dihydroxyacetone phosphate.

Glycolysis is the process of the formation of glucose into 2 molecules of pyruvate. It is a cellular process, the molecule reduces in carbon number to form pyruvate thus electrons are removed in the fourth step of glycolysis. The reaction is:

Fructose-6-phosphate(6 carbon) →→→ Glyceraldehyde-3- phosphate(3 carbon) +  Dihydroxyacetone phosphate (3 carbon)

This reaction occurs in the presence of the enzyme Fructose bisphosphate aldolase. The reaction generates a reduced electron carrier NAD⁺

Dihydroxyacetone phosphate further reverses into glyceraldehyde-3-phosphate, thus leading to the formation of 2 molecules of pyruvate(a 3-carbon molecule).

Learn more about glycolysis here https://brainly.com/question/737320

#SPJ4

Answer:

It will not change, even if you still heat it.

Explanation:

Consider the combustion of methane:

CH₄(g) + 2O₂(g) → CO₂(g) + 2H₂O(g)

The reactant is decreasing at the fastest rate is CH₄.

Combustion of methane CH₄ is a reaction between methane and oxygen present in the air to produce carbon dioxide and water.

the reaction involved is

CH₄(g) + 2O₂(g) → CO₂(g) + 2H₂O(g)

The limiting reagent in this reaction is methane because the other reactant is oxygen which is present in air is always there ion excess. thus, the amount of carbon dioxide and water produced in the combustion of methane will depend upon the amount of methane burnt .

Thus,  Consider the combustion of methane:

CH₄(g) + 2O₂(g) → CO₂(g) + 2H₂O(g)

The reactant is decreasing at the fastest rate is CH₄.

To learn more more about combustion of methane here

https://brainly.com/question/6817761

#SPJ1

The best way to dry a liquid with a drying agent is to add it in small batches and observe the solution between each addition. It is also very helpful to swirl the mixture after each batch.

The ideal drying process involves using the least amount of drying agent possible. If too much of the reagent is used, a certain amount of the liquid being dried will be lost as it is adsorbed on the surface of the drying agent. The swirling in between each batch serves to check if enough of it has been added. The drying agent clumps together when it absorbs water, so when all the water has been absorbed, it will swirl free as a powder.

You can learn more about drying agents here:
brainly.com/question/21119355

#SPJ4

The correct answer of chemical reaction is option (C) an odor is produced by burning a sugar.

An odor is produced by burning a sugar is a statement which indicates that a chemical reaction has taken place.

A chemical reaction is a manner that leads to the chemical transformation of 1 set of chemical substances to some other. A chemical reaction is a technique in which one or extra materials, also called reactants, are converted to 1 or greater special materials, known as merchandise. substances are both chemical factors or compounds.

A chemical reaction is a system in which reactants react chemically and convert into merchandise by chemical transformation. as an example, breathing we inhale oxygen which reacts with glucose and produces carbon dioxide, water and energy.

Learn more about chemical reaction here:- https://brainly.com/question/11231920

#SPJ1

Answer:

C: 4

H: 1

Mg: 2

O : 6

Explanation:

You can quickly find out the number of valence electrons by looking at where the element is on the periodic table and referring to the table that is attached.

Water has a 1 g/cm3 density. Weight of water in grammes when a bottle is completely filled with that amount of water.

Density bottle volume:

The empty density bottle weighs M1 = 4 kg.

Bottle weight plus water equals 12.5 kg Bottle weight plus water equals 12.5 kg Mass of water filling the density container to the top equals M2 — M1 (12.5—4=8.5 kg).

However, 1 g of water has a volume of 1 cc.

∴ water volume equals 8.5 cubic centimetres, or 8.5 ml, in a density bottle.

Define density.

The ratio between a substance's mass and volume is referred to as its density.

Volume/Mass = Density

The substance's mass per unit of volume is known as its density (volumetric mass density or specific mass). Although the Latin letter D may also be used, the sign most frequently used for density is (the lower case Greek letter rho). Mass divided by volume is the definition of density in mathematics: where is the density, m is the mass, and V is the volume.

To learn more about Mass of an empty bottle, visit

https://brainly.com/question/28005600

#SPJ13

To check in case the splitting of a long-chain hydrocarbon has created alkenes, the gas created can be bubbled through natural gas or aromatic rich petroleum gas.

The first beginning of cracking of hydrocarbons is alkanes. The items of splitting incorporate alkanes and alkenes, individuals of a different homologous series.

An alkene could be a hydrocarbon that contains a carbon-carbon twofold bond. The longer alkanes are warmed, and their vapors are passed over a hot catalyst. This causes covalent bonds to break and change.

In thermal breaking, tall temperatures (ordinarily within the run of 450°C to 750°C) and weights (up to approximately 70 climates) are utilized to break the huge hydrocarbons into littler ones.

Thermal splitting gives blends of items containing tall extents of hydrocarbons with two-fold bonds - alkenes.

Catalytic cracking uses a temperature of approximately 550°C and a catalyst known as a zeolite which contains aluminum oxide and silicon oxide. Steam cracking uses a higher temperature of over 800°C and no catalyst.

Learn more about hydrocarbons at

https://brainly.com/question/3614247

#SPJ9

The volume of concentrated aqueous ammonia must be diluted to 1.00 l to make a solution that has a molarity of 1.85 m. concentrated nh3 (aq) is 15 m. report the volume of concentrated aqueous ammonia in milliliters is 123 mL

The number of moles of solute must always remain constant while diluting solutions, which is the most crucial thing to remember.

In other words, the amount of solute in the concentrated sample must be identical to the amount of solute in the diluted solution.

The concentration is the number of moles per unit volume. So

c=n/V

n=CV

n= 1.85x1

n=1.85

Now your task is to determine what volume of the concentrated solution would contain this many moles of ammonia.

Plugging the values, we get

V=1.85/15

V=0.123 L

Now for dilution calculations, we have

C1V1=C2V2

V1=C2/C1.V2

V1=1.85/15x1.00= 123 mL

To learn more about dilution visit:

brainly.com/question/13949222

#SPJ4

The amount of water vapor in the atmosphere is measured as blank humidity whereas blank relative humidity is the ratio of the amount of water vapor to the maximum amount of water vapor that can be held by an air mass.

Solar energy is absorbed and stored as latent heat, which is then transported to higher latitudes and released as the water cools and changes phase. any gas that absorbs infrared radiation (net heat energy) emitted from the Earth's surface and reradiates it back to the Earth's surface, thereby contributing to the greenhouse effect The most significant greenhouse gases are carbon dioxide, methane, and water vapour. Water vapor is the most abundant greenhouse gas on Earth. It is responsible for roughly half of the greenhouse effect, which occurs when gases in the Earth's atmosphere trap the Sun's heat. Greenhouse gases enable us to live on our planet.

Learn more about water vapor here-

https://brainly.com/question/11194381

#SPJ4

No. We cannot crystalline one enantiometer of mandolin acid from a racemic mixture without preparing a disatereomeric salt because enantiomers have the same solubility in achiral solvents, one enantiomer can not be selectively crystallized from the solution.

What is crystallization?

A supersaturated solution nucleates the solute in the process of crystallization, which is a technique for turning a solution into a solid under the control of chemical equilibrium. The result is the formation of uniform particles with well defined morphologies that easily dissolve again. Crystals are frequently fragile.

Precipitation from a solution, freezing, and, less frequently, direct deposition from a gas are a few processes that can result in the formation of crystals.

Hence, it cannot be crystallized.

To learn more about crystallization, click:
https://brainly.com/question/4155452

#SPJ4

The ideas on atoms proposed by Dalton constitute a theory, while the ideas proposed by Democritus do not because Democritus' theories did not explain chemical behavior and were not supported by experimental findings.

Dalton's theories were scientifically based and did explain chemical behavior; his tests revealed that the ratios in which elements were mixed were whole numbers. Democritus' theories were in line with later scientific theories, but they did not account for chemical activity. Democritus' method was not based on science, so it also lacked experimental support.

 According to the first section of Dalton's theory, all matter is composed of indivisible atoms. According to the second component of the theory, the mass and characteristics of every atom in a specific element are the same. Compounds, according to the third section, are combinations of two or more different kinds of atoms.

Learn to know more about atoms on

https://brainly.com/question/900457

#SPJ1

Answer:

Unbalanced forces affect motion of objects by causing them to accelerate, decelerate or change direction.