Which rock type is most likely to compsoed of just one mineral?

rock salt
conglomerate
basalt
rhyolite

Answer:

pOH = 0.3

Explanation:

As KOH is a strong base, the molar concentration of OH⁻ is equal to the molar concentration of the solution. That means that in this case:

With that information in mind we can calculate the pOH by using the following formula:

Answer:

Rust forms on iron filings faster than on a large iron block

Explanation:

Because the surface area exposed to air in the refrigerator is greater than its area by mass, the rust-forming reaction occurs faster.

Answer:

(b) Chlorine takes electrons from potassium in the reaction.

Explanation:

Oxidation-Reduction: A reaction in which electrons are exchanged from one substance to another, also called redox.

In K(s) + Cl2(g) → 2KCl(s) , the electrons are being exchanged between one another. In this case, Chlorine atoms are taking electrons from potassium.

you're welcome

The reaction has been termed the oxidation-reduction reaction, as Chlorine takes electrons from potassium. Thus, option C is correct.

The reaction between Chlorine and Potassium has resulted in the formation of Potassium Chloride. The reaction has been termed the ionic redox reaction.

The redox reaction can be described as the oxidation-reduction reaction in which the oxidation of an atom by the loss of electrons, results in the reduction of another atom by the gain of the electron.

In the reaction of Chlorine and Potassium, there has been the loss of electron potassium and the gain of electrons by Chlorine. Thereby Potassium is getting oxidized, and Chlorine is getting reduced.

Thus, the reaction has been termed the oxidation-reduction reaction, as Chlorine takes electrons from potassium. Thus, option C is correct.

For more information about the oxidation-reduction reaction, refer to the link:

https://brainly.com/question/4222605

Explanation:

Air is a combination of other gases, dust particles, pollens, spores etc. This means that air is a heterogeneous mixture where particles are unevenly distributed.

Air is not considered as a pure substance because there is not one element present in air. A substance which contains only one type of element is called a pure substance.

Therefore, it is wrong to use the term 'Pure Air' in Science.

Answer:

70.137 °C

Explanation:

The reaction generated from the question can be expressed as:

[tex]2NaOH_{(s)} + H_2SO_{4(aq)} \to Na_2SO_{4(aq)} +2H_2O_{(l)}[/tex]

The enthalpy reaction:

[tex]\Delta H^0 _{rxn} = \sum \Delta H^0 _{f (products)} - \sum \Delta H^0 _{f (reactants)}[/tex]

[tex]\Delta H^0 _{rxn} =[2 \times \Delta H^0 _f (H_2O) + \Delta H^0 _f (Na_2SO_4) ] -[2 \Delta \times H^0 _f (NaOH) + \Delta H^0 _f (H_2SO_4) ][/tex]

Repacing the values of each compound at standard enthalpy conditions;

[tex]\Delta H^0 _{rxn} =[2 \times -279.4 + (-1384.49)]-[(2\times -418) -913]\ kJ[/tex]

[tex]\Delta H^0 _{rxn} =-194.29 \ kJ[/tex]

no of moles of NaOH = 12.618g/39.99 g/mol

= 0.3155 mol

no of moles of H₂SO₄ = molarity of H₂SO₄ × Volume

= 1.3553 mol/L × 100 × 10⁻³ L

= 0.13553 mol

From the reaction,

1 mol of NaOH = 2 × mol of H₂SO₄

Since mol of NaOH is greater than that of  H₂SO₄, then NaOH is the excess reagent and H₂SO₄ is the limiting reactant

∴

1 mol of H₂SO₄ yields = - 194.29 kJ

0.13553 mol of H₂SO₄ will yield;

[tex]= \dfrac{-194.29 \ kJ}{1 \ mol} \times 0.13553 \ mol[/tex]

= -26.332124 kJ

= -26332.12 J

Finally,

Heat(q) = [tex]m_{(copper)} \times C_{(copper)}\times \Delta T[/tex]

26332.12 J = 1.317 × 10³ g × 0.375 J/g°C ×ΔT

26332.12 J = 493.875 J/° C  × ΔT

26332.12 /  493.875 = ΔT

ΔT = 53.317 °C

[tex]T_f - T_i = 53.317 ^0 C[/tex]

[tex]T_f[/tex]- 16.82 °C = 53.317 °C

[tex]T_f[/tex] = (53.317 + 16.82) °C

[tex]T_f[/tex] = 70.137 °C

Answer:

.094 M

Explanation: 0.32molNaCl/ 3.4L = .094M

Answer:

Explanation:

fluorine have gained one electron that is why the sign is -1. they both have different number of protons. They have different neutron numbers. F have 10 and O have 8.

hope this helps :)

Answer:

Constitutional Isomers

Explanation:

Constitutional isomers can be regarded as structural isomers ,these are compounds that have the same molecular formula with different structural formulas. Example is Butane and isobutane; both compound posses the same molecular formula(C4H10) with different structural formulas. compounds of Constitutional isomers are differ in term of connectivity, which

is the way the constituent atoms are been connected to another. It should be noted that Constitutional Isomers Share the same molecular formula but have different connectivity of atoms and different physical properties.

Answer:

5Atm

Explanation:

I just guess and it’s right

Answer:

The milk takes shape of the round glass.

Answer:

0.127M

Explanation:

Molarity of a solution = number of moles (n) ÷ volume (V)

Molar mass of Mg(NO3)2 = 24 + (14 + 16(3)}2

= 24 + {14 + 48}2

= 24 + 124

= 148g/mol

Using the formula, mole = mass/molar mass, to convert mass of Mg(NO3)2 to mole

mole = 14g ÷ 148g/mol

mole = 0.095mol

Volume = 750mL = 750/1000 = 0.75L

Molarity = 0.095mol ÷ 0.75L

Molarity = 0.127M

Answer:

0.00370 g

Explanation:

From the given information:

To determine the amount of acid remaining using the formula:[tex]\dfrac{(final \ mass \ of \ solute)_{water}}{(initial \ mass \ of \ solute )_{water}} = (\dfrac{v_2}{v_1+v_2\times k_d})^n[/tex]

where;

v_1 = volume of organic solvent = 20-mL

n = numbers of extractions = 4

v_2 = actual volume of water = 100-mL

k_d = distribution coefficient = 10

∴

[tex]\dfrac{(final \ mass \ of \ solute)_{water}}{0.30 \ g} = (\dfrac{100 \ ml}{100 \ ml +20 \ ml \times 10})^4[/tex]

[tex]\dfrac{(final \ mass \ of \ solute)_{water}}{0.30 \ g} = (\dfrac{100 \ ml}{100 \ ml +200 \ ml})^4[/tex]

[tex]\dfrac{(final \ mass \ of \ solute)_{water}}{0.30 \ g} = (\dfrac{1}{3})^4[/tex]

[tex]\dfrac{(final \ mass \ of \ solute)_{water}}{0.30 \ g} = 0.012345[/tex]

Thus, the final amount of acid left in the water = 0.012345 * 0.30

= 0.00370 g

Answer:

0.515 M

Explanation:

The reaction that takes place is:

First we convert 1.22 g of malonic acid into moles, using its molar mass:

Then we convert 0.01172 malonic acid moles into NaOH moles, using the stoichiometric coefficients of the balanced reaction:

Finally we calculate the concentration of the NaOH solution, using the number of moles and given volume:

Converting 45.5 mL ⇒ 45.5/1000 = 0.0455 L

Answer:

Sound travels through the air in approximately 332 metres per second?

Explanation:

is this what you are looking for>

Answer: 88 grams

Explanation:

Answer:

jhhhhhhhhh

Explanation:

dffffffffffffg

Answer:

The equation: (NH₄)₂SO₄ = 2NH4(+) + SO4(-2)

The number of moles = 5 g / 132.14 g/mol = 0.038 mol

The number of molecules = 0.038 X 6.022x10^23 = 2.29x10^23

the number of positive ions present in the ammonium sulphate solution:

2 positive ions for every 1 molecule of (NH₄)₂SO₄

so 2 x 2.29x10^23 = 4.58x10^23

the number of negative ions present in the ammonium sulphate solution

1 negative ion for every 1 molecule of (NH₄)₂SO₄

so 1 x 2.29x10^23 = 2.29x10^23

the total number of ions present in the ammonium sulphate solution​

4.58x10^23 + 2.29x10^23 = 6.87x10^23

Answer: The correct option is A) a nitrogen molecule.

Explanation:

Polar covalent molecules are defined as chemical compounds in which the difference in electronegativity between the atoms is not equal to 0. These molecules are formed by heteronuclear molecules.

Heteronuclear molecules are defined as the molecules which are formed by the combination of more than one type of atom having a different nucleus.

Non-polar covalent molecules are defined as chemical compounds in which the difference in electronegativity between the atoms is equal to 0. These molecules are formed by homonuclear molecules.

Homonuclear molecules are defined as the molecules which are formed by the combination of one type of atom having the same nucleus.

From the given options:

It is a homonuclear molecule formed by the combination of 2 nitrogen atoms

It is a heteronuclear molecule formed by the combination of 1 nitrogen and 1 oxygen atoms

It is a heteronuclear molecule formed by the combination of 2 nitrogen and 1 oxygen atom and has some dipole moment. Thus, is considered a polar molecule

It is a heteronuclear molecule formed by the combination of 1 nitrogen and 2 oxygen atoms and has some dipole moment. Thus, is considered a polar molecule

Hence, the correct option is A) a nitrogen molecule.

Answer:

35.75 days

Explanation:

From the given information:

For first-order kinetics, the rate law can be expressed as:

[tex]\mathsf{In \dfrac{C}{C_o} = -kt}[/tex]

Given that:

the rate degradation constant = 0.12 / day

current concentration C = 0.05 mg/L

initial concentration C₀ = 3.65 mg/L

[tex]\mathsf{In( \dfrac{0.05}{3.65})= -(0.12) t}[/tex]

㏑(0.01369863014) = -(0.12) t

-4.29 = -(0.12)

t = -4.29/-0.12

t = 35.75 days

Answer:

P = pressure T = temperature

Answer: The amount of heat needed to melt the given amount of octane is 84.6 kJ

Explanation:

We know:

Boiling point of Octane = [tex]125.6^oC[/tex]

Few processes involved are:

(1): [tex]C_8H_{18} (s) (-57^oC, 219K) \rightleftharpoons C_8H_{18}(s) (-57^oC, 219K[/tex]

(2): [tex]C_8H_{18}(l) (-57^oC, 219K) \rightleftharpoons C_8H_{18}(l) (99.2^oC,372.2K)[/tex]

Calculating the heat absorbed for the process having same temperature:

[tex]q=n\times \Delta H_{(f)}[/tex] ......(i)

where,

q is the amount of heat absorbed, n is the moles of sample and [tex]\Delta H_{(f)}[/tex] is the enthalpy of fusion

Calculating the heat released for the process having different temperature:

[tex]q=n\times C_{l}\times (T_2-T_1)[/tex] ......(ii)

where,

n = moles of sample

[tex]C_{l}[/tex] = specific heat of liquid

[tex]T_2\text{ and }T_1[/tex] are final and initial temperatures respectively

The number of moles is defined as the ratio of the mass of a substance to its molar mass.

The equation used is:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(3)

Given mass of octane = 160. g

Molar mass of octane = 114.23 g/mol

Plugging values in equation 3:

[tex]\text{Moles of octane }=\frac{160.g}{114.23g/mol}=1.40 mol[/tex]

We are given:

[tex]n=1.40mol\\\Delta H_{fusion}=20.740 kJ/mol[/tex]

Putting values in equation (i), we get:

[tex]q_1=1.40mol\times 20.470kJ/mol\\\\q_1=28.658kJ[/tex]

We are given:

[tex]n=1.40mol\\C=255.68J/mol^oC\\T_2=99.2^oC\\T_1=-57^oC[/tex]

Putting values in equation (ii), we get:

[tex]q_2=1.40mol\times 255.68J/mol^oC\times (99.2-(-57))\\\\q_2=55912.10J=55.912kJ[/tex]

Calculating the total amount of heat released:

[tex]Q=q_1+q_2[/tex]

[tex]Q=[(28.658)+(55.912)]kJ=84.6kJ[/tex]

Hence, the amount of heat needed to melt the given amount of octane is 84.6 kJ

Answer:

B - The high temperature makes the gas molecules spread apart according to Charles's law because this law describes how a gas will behave at constant pressure.

Explanation:

Charle's Law describes the relationship between temperature and volume, where increased temperature leads to increased volume. When volume is increased, that means the gas molecules are more spread apart and have more random motion. Therefore, the answer is B.

The high temperature causes the gas molecules to spread apart according to Charles's law because explain how a gas, behave at constant pressure.

The physical principle called Charles' law which  states that the volume of a gas equals a constant value many by its temperature as measured on the Kelvin scale.

Volume regaled by a clinched amount of gas is directly proportional to its temperature and pressure if remains steady.

Thus, option "B" is correct, the volume of a gas equals a constant value.

To learn more about Charles law click here:

https://brainly.com/question/14842720

Answer:

Reactions in which a multiple bond between two atoms becomes partly or fully saturated by covalent attachments... A typical addition reaction may be illustrated by the hydrochlorination of propene (an alkene), for which the equation is CH3CH = CH2 + HCl → CH3C+HCH3 + Cl− → CH3CHClCH3.

Explanation:

thank me later

CH3CH = CH2 + HCl → CH3C+HCH3 + Cl− → CH3CHClCH3.

This reaction is the example of addition reaction.

An addition reaction is defined as a chemical reaction in which two or more molecules combine to produce a bigger molecule. This type of reaction is called addition reaction.

So we can conclude that the formation of bigger molecule is the example of addition reaction.

Learn more about reaction here: https://brainly.com/question/26018275

#SPJ2

Answer:

Wearing goggles or other eye protection will remove the risk or danger for these students

Explanation:

Soft contact lenses are usually worn in the eyes and Ammonia compound may fog the lens thereby retaining the particles of ammonia which could spread to the eye and cause a lot of damage to it.

Using a goggle is usually more effective in dealing with the risks involved as they prevent the Ammonia from having any contact at all with the eyes due to the far proximity to the eyes when compared to contact lenses.

Answer: pH = 2,897 , basic[tex][H+][OH-] = 10^{-14} ==> [H+] = \frac{10^{-14}}{7,89*10^{-12} } =\frac{1}{789} \\pH= -lg([H+]) = 2,897 \\pH<7 ==> basic[/tex]

Explanation:

Answer:

maybe it's c. An endothermic reaction

An endothermic reaction is a chemical reaction that absorbs heat. Therefore, the correct option is option C.

An endothermic reaction in thermochemistry would be any thermodynamic process that results in a rise in the system's enthalpy H (or heat capacity U). A closed system typically helps to absorb thermal energy from the surroundings during such a process, which causes heat transfer through into system.

It could be a physical process, like the melting of ice cubes, or a chemical process, like the dissolution of ammonium nitrate (NH[tex]_4[/tex]NO[tex]_3[/tex]) throughout water (H[tex]_2[/tex]O).  An endothermic reaction is a chemical reaction that absorbs heat.

Therefore, the correct option is option C.

To know more about an endothermic reaction, here:

https://brainly.com/question/23184814

#SPJ7

Answer:

See explanation and image attached

Explanation:

The reaction between benzophenone and phenylmagnesium bromide is a Grignard reaction.

A Grignard reagent is any alkyl magnesium halide compound. In this case, the Grignard reagent is phenylmagnesium bromide.

Reaction of Grignard reagent with a ketone yields all alcohol. Thus, the reaction of benzophenone with phenylmagnesium bromide yields triphenyl methanol.

The mechanism of the reaction and all electron movements are shown in the image attached to this answer.

Fluids are liquid and gases. They take the shape of their containers. They are called fluids because of their ability to flow.

Answer:

sending heat waves and vibrations