Answer:
Gas
Explanation:
During which step of this procedure does a chemical change occur?
A. 1
B. 2
C. 3
D. 4
................ is the organic molecule that is the main energy source for cell processes and is made with the energy released from the breakdown of glucose.
Answer:
ATP
Explanation:
it is made by breaking glucose down
Answer:
Once the last phosphate group is removed from the ATP molecule by hydrolysis, it will form ADP plus inorganic phosphate. ADP is a lower energy molecule. The release of energy during hydrolysis of ATP can be harnessed by the cell to do work. Living things continuously use ATP but it is renewable and can be recycled.
Explanation:
That was to your second question in the description part
A fruit juice has a very sour taste. What does this most likely indicate?
A. The juice is a metal
B. The juice is a salt
C. The juice is an acid
D. The juice is a base
Explanation:
its hard its either B or C i dont wanna be wrong;-;
Answer:
The Juice wouldnt be a metal, Salt isnt that effective in juice if you have sensitive tastebuds. Your answer is C. THe Juice is an acid
Explanation:
what is the effect of molecular weight on melting and boiling point of alkanes??
Answer:
Their melting and boiling points of alkanes are relatively low. The higher the molecular weight (the greater the number of carbons), the higher the boiling point.
In the reaction 4Al+__O2→2Al2O3, what coefficient should be placed in front of the O2 to balance the reaction?
Question 2 options:
1
2
3
a muscle fiber contracts when myosin filaments pull actin filaments closer together and thus shorten sarcomeres within a fiber. When all the sarcomeres in a muscle fiber shorten, the fiber contracts
Answer:According to the sliding filament theory, a muscle fiber contracts when myosin filaments pull actin filaments closer together and thus shorten sarcomeres within a fiber.
Explanation:
No need for an explanation if i just answered it
Adaleigh is learning about renewable and non-renewable resources in her science class. She decides to take
a nature walk and makes notes of all the renewable resources that she sees. Which of the following is an
observation that Adaleigh could have made on her walk?
A. The seeds on the ground are going to grow into new trees.
B. The tallest trees had the most seeds around their bases.
C. When trees decay, they could eventually turn into coal.
D. Pine trees are older than oak trees.
Answer:
A. The seeds on the ground are going to grow into new trees.
Explanation:
Trees are renewable resources.
consider the reaction between acetylene C2H2 and oxygen in a welding torch 2C2H2 + 5O2 = 4CO2 + 2H2O of 5.4 moles of acetylene react with sufficient oxygen how many grams of CO2 should form
Answer:
C. 4.8*10² g.
Explanation:
The average speed of an oxygen molecule is 6.14 x 104 cm/sec at a certain temperature. What is the average speed of a CO2 molecule at the same temperature? (molar mass O2 = 31.9988; CO2 = 44.0098)
Answer:
the average speed of [tex]V_{av} CO_2[/tex] is 5.24 × 104 cm/s
Explanation:
The computation of the average speed of a [tex]CO_2[/tex] is as follows:
[tex]\sqrt{average} = \sqrt{\frac{8 RT}{\pi M} }[/tex]
where,
M = Molar mass
[tex]V_{av} = \frac{\sqrt{1}}{M}[/tex]
Given that
[tex]V_{av} \ of\ oxygen= 6.14 \times 10^4 cm/s[/tex]
The molar mass of oxygen i.e. (MO_2) = 31.9988 g/mol
And, the molar mass of CO_2 is 44.0098 g/mol
Now
[tex]\frac{V_{av} CO_2}{V_{av} O_2} = \frac{\sqrt{M_{O2} }}{M_{CO2}}[/tex]
Now place these values to the above formula
[tex]\frac{V_{av}CO_2}{6.14\times 104 cm/s} = \frac{\sqrt{31.9988} }{44.0098}[/tex]
So,
V_av CO_2 is 5.24 × 104 cm/s
hence, the average speed of [tex]V_{av} CO_2[/tex] is 5.24 × 104 cm/s
Which of the following shows correctly an ion pair and the correct formula for the ionic compound the two ions form?
A) Cu1+, O2–; CuO
B) Cr3+, I–; CrI
C) Sn4+, N3–; Sn4N3
D) Fe3+, O2–; Fe2O3
Answer:
D) Fe³⁺, O²⁻; Fe₂O₃
Explanation:
Option D shows correctly an ion pair and the correct formula for the ionic compound the two ions form.
Ion pairs of iron and oxygen react to form iron (III) oxide. The iron (III) oxide is one of the oxides of iron. The compound is usually attacked by acids and it is often called rust. It is used in the feedstock of the steel and iron industries. This means that the compound is used in the production of iron, steel, and many alloys.
Below are some equations:
4 Fe + 3 O₂→ 2 Fe₂O₃
Fe⁰ + 3O₂⁰ → Fe³⁺O₃²⁻
QUE CONTIENE EL CROMO QUE SE UTLIZA EN LAS TINTURAS PARA TATUAJES
Answer:
Hexavalent chromium
Explanation:
Examples of nuclear fusion and fission.
Answer: For example, uranium can fission to yield strontium and krypton. Fusion joins atomic nuclei together. The element formed has more neutrons or more protons than that of the starting material. For example, hydrogen and hydrogen can fuse to form helium.
Explanation:
Hope this helped!
Answer:
Explanation:For example, uranium can fission to yield strontium and krypton. Fusion joins atomic nuclei together. The element formed has more neutrons or more protons than that of the starting material. For example, hydrogen and hydrogen can fuse to form helium.
The reaction of HCl with NaOH is represented by the equation
HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l)
What volume of 0.417 M HCl is required to titrate 11.9 mL of 0.151 M NaOH?
a. 4.3 mL
b. 2.39 mL
c. 0.749 mL
d. 32.8 mL
e. 11.9 mL
Answer:
a. 4.3 mL
Explanation:
Step 1: Write the balanced neutralization reaction
HCl(aq) + NaOH(aq) → NaCl(aq) + H₂O(l)
Step 2: Calculate the reacting moles of NaOH
11.9 mL of 0.151 M NaOH react.
0.0119 L × 0.151 mol/L = 0.00180 mol
Step 3: Calculate the reacting moles of HCl
The molar ratio of HCl to NaOH is 1:1. The reacting moles of HCl are 1/1 × 0.00180 mol = 0.00180 mol.
Step 4: Calculate the volume of 0.417 M HCl that contains 0.00180 moles of HCl
0.00180 mol × (1000 mL/0.417 mol) = 4.3 mL
According to the question,
Mass,
[tex]M_1 = 0.417[/tex][tex]M_2 = 11.9[/tex]Volume,
[tex]V_1 = ?[/tex][tex]V_2 = 0.151[/tex]As we know the relation,
→ [tex]M_1V_1 = M_2 V_2[/tex]
or,
→ [tex]V_1 = \frac{M_2 V_2}{M_1}[/tex]
By substituting the values, we get
[tex]= \frac{11.9\times 0.151}{0.417}[/tex]
[tex]= \frac{1.7969}{0.417}[/tex]
[tex]= 4.3 \ mL[/tex]
Thus the above answer is right.
Learn more about reaction here:
https://brainly.com/question/12205810
Density of molecules
For the presentation you will research and provide summaries for manned and unmanned explorations of your choice. The presentation should be about twelve slides in length. Your presentation will include:
Title
Introduction – gives an overview of the presentation
Time line of missions – must include 3 manned and 3 unmanned missions
Description of each of the missions in the timeline (1 mission per slide)
Name and date of mission
Purpose of missions
Results or findings from missions
Scientific advance – describe a scientific advancement that has led to an engineering improvement in space exploration
Engineering advance – describe an engineering advance that has led to greater knowledge about the solar system
Sources – list the websites and other sources you used
Remember to make a list (i.e., bullet points) on each slide. The slides should feature the highlights of the main idea. The bullet points should be short phrases (at most, one sentence) that highlight key points.
Answer:
Thank u ?
Explanation:
i don't get your question can you rephrase it pls
Answer:
Look this up on g00gle it will give it right to you! :)
Explanation:
Sodium chloride (NaCl) can be broken down to produce
pure sodium (Na) and chlorine gas (CI).
Which equation represents this chemical reaction?
A. 2NaCl + Cl2
2Na
B. 2NaCl + 2Na
Cl2
C. 2Na
2NaCl + Cl2
D. 2Naci - 2Na+ Cl2
Answer:
Explanation:
B
Answer:
Explanation:
It D I’m taking it right nowwww
What is the difference between a purine and a pyrimidine?
Answer: Adenine and guanine are the two purines and cytosine, thymine and uracil are the three pyrimidines. The main difference between purines and pyrimidines is that purines contain a sixmembered nitrogencontaining ring fused to an imidazole ring whereas pyrimidines contain only a sixmembered nitrogencontaining ring. They both are types or categories of nitrogen containing bases present in nuclei acids of DNA and RNA.
Purines are 2 Ring or Carbon Ring, Nitrogen containing bases. That consist of these 2 rings next placed next to each other. These examples include - Adenine and Guanine.
Pyrimidines are 1 or single Ring Nitrogen containing structures. There are 3 nitrogenous bases that are categorized as pyrimidines. Cytosine, Thymine, and Uracil.
Joshua wants to create something to put between a hot pot and a table, so he doesn't burn the table. He
knows he needs to choose a material that does not conduct heat well. Which material would be the best for
him to choose?
A. Wood
B. Aluminum
C. Copper
D. Glass
Determine the number of hydrogen atoms in an alkyne with one carbon–carbon triple bond and 4 carbon atoms.
number of hydrogen atoms: ?
Answer:
There are 6 hydrogen atoms.
Explanation:
The formula for an alkyne that has only one triple bond is as follows:
CₙH₂₍ₙ₎₋₂Where n is any natural number greater than 2.
For this problem, n=4. This would mean the formula is:
C₄H₂₍₄₎₋₂Thus
C₄H₈₋₂C₄H₆Thus the answer is 6, there are 6 hydrogen atoms.
A chemist combine did 3.50g of potassium level with chlorine gas to yield 6.6 7g of potassium for it. Assuming all the potassium was consumed, and that potassium chloride was the only product that formed, what mass of chlorine reacted?
Answer: mass of chlorine reacted is 3.18 g
Explanation:
2 K + Cl2 = 2KCl
no. of moles of K = mass / molar mass
= 3.50 / 39
= 0.0897
no. of moles of KCl = mass / molar mass
= 6.67 / 74.5
= 0.0895
no. of moles of Cl2 required = number of moles of KCl / 2
= 0.0895 / 2
= 0.0448 moles
mass of Cl2 required = no. of moles of Cl2 required x molar mass
= 0.0448 x 71
= 3.1808 g ≈ 3.18 g
Therefore mass of chlorine reacted is 3.18 g
An object that has kinetic energy must be?
A at rest
B stopped
C in motion
Or
D at an elevated position
Answer:
C in motion
Explanation:
trust
To measure the amount of nickel in some industrial waste fluid, an analytical chemist adds 0.110 M sodium hydroxide (NaOH) solution to a 25.0 g sample of the fluid and collects the solid nickel(I) hydroxide (Ni (OH2) product. When no more Ni(OH)2 is produced, he filters, washes and weighs it, and finds that 343. mg has been produced The balanced chemical equation for the reaction is: Ni2+(aq) + 2NaOH(aq) Ni(OH)2(s) + 2 Na.
What kind of reaction is this?
a. precipitation
b. acid-base
c. redox
Answer:
a. precipitation
Explanation:
In the reaction:
Ni²⁺(aq) + 2NaOH(aq)→ Ni(OH)₂(s) + 2 Na⁺
Nickel is precipitated as Ni(OH)₂ producing Na⁺ ions.
In a precipitation two soluble ions react with each other to produce an insoluble salt.
In our problem, Ni²⁺ is reacting with OH⁻ to produce Ni(OH)₂, an insoluble salt
The reaction is a precipitation
In an acid-base reaction, an acid reacts with a base to produce water and a salt. In this problem is a base reacting (NaOH) but there are no acids in the reaction.
And in a redox reaction an ion is been oxidized whereas the other is been reduced (Loosing electrons and gaining electrons).
As you can see, Ni²⁺ still with oxidation number of 2+ in Ni(OH)₂ and Na⁺ is always +1-. Thus, this is not a redox reaction.
Which of the following describes an atom that is neutral?
15 protons, 14 neutrons, and 14 electrons
15 protons, 14 neutrons, and 15 electrons
15 protons, 15 neutrons, and 14 electrons
15 protons, 14 neutrons, and 16 electrons
Answer:
the answer is the third or fourth one
____________ sedimentary rocks form from the remains of living things.
a.
organic
c.
detrital
b.
chemical
d.
foliated
Answer:
I believe the answer is A. Organic.
Hope it helps!
Answer:
Organic
Explanation:
living things are organic, so chemical is wrong, detrital is when rocks form from broken down rocks left behind, again not from living things so that's also wrong, that leave Organic and foliated, foliated makes no sense which leave only Organic, so organic will be your answer
what coefficients used to balance chemical equation below? ___ Ag2O ----> ____ Ag + ___ O2
A 2,4,1
B 2,2,2
C 2,1,2
D 1,1,1
The coefficients used to balance the chemical equation given in the question are 2, 4, 1 (Option A)
What is a chemical equation?Chemical equations are representations of chemical reactions using symbols and formula of the reactants and products.
The reactants are located on the left side while the products are located on the right side.
Reactants —> Products
The balancing of chemical equations follows the law of conservation of matter which states that matter can neither be created nor destroyed during a chemical reaction but can be transferred from one form to another.
How to balance the equationAg₂O —> Ag + O₂
There are 2 atoms of O on the right side 1 on the left. It can be balance by writing 2 before Ag₂O as shown below
2Ag₂O —> Ag + O₂
There are 4 atoms of Ag on the left side and 1 atom on the right side. It can be balance by writing 4 before Ag as shown below
2Ag₂O —> 4Ag + O₂
Now, the equation is balanced.
Thus, the coefficients are: 2, 4, 1
Learn more about chemical equation:
https://brainly.com/question/7181548
#SPJ2
Which of the following observations would be the expected indication that a reaction has taken place when a solution of cesium sulfate is mixed with strontium perchlorate.
Bubbling
Formation of percipitate
Formation of soluble salts
Formation of a gas
Answer:
Formation of precipitate
Formation of soluble salts
Explanation:
Let's consider the molecular equation that takes place when an aqueous solution of cesium sulfate is mixed with an aqueous solution strontium perchlorate.
Cs₂SO₄(aq) + Sr(ClO₄)₂(aq) ⇒ 2 CsClO₄(aq) + SrSO₄(s)
According to the solubility rules:
CsClO₄ is a soluble salt.SrSO₄ is an insoluble salt that precipitates as a solid.For a double displacement reaction to occur, at least one of the products must be insoluble or volatile.
Answer:
It's b) Formation of a precipitate
Explanation:
I took the quiz and got it right.
Which balance equation represents a single replacement reaction
Answer: A single replacement reaction looks sort of like this
A + BC —> AC + B
Explanation: It would be a LOT more helpful for us if you had provided the answer choices for this question, but I'll try to help by explaining WHAT single-replacement reactions are.
Single-replacement reactions are reactions in which one ion displaces another to form a new compound . One reactant is an element; one reactant is a compound . One product is an element; one product is a compound . The reactant element is part of the compound product .
I hope this helped!
(6
32. Calcium carbide, CaC2, is an important preliminary chemical for industries producing
synthetic fabrics and plastics. CaC2 may be produced by heating calcium oxide with
CaO + C CaC2+CO
What is the mass of CaC2 which can be produced from the reaction of excess calcium oxi
10.2 g of carbon? (Hint: Balance the equation first)
Answer:
18.1 g
Explanation:
Step 1: Write the balanced equation
CaO + 3 C ⇒ CaC₂ + CO
Step 2: Calculate the moles corresponding to 10.2 g of C
The molar mass of C is 12.01 g/mol.
10.2 g × 1 mol/12.01 g = 0.849 mol
Step 3: Calculate the moles of CaC₂ produced from 0.849 moles of C
The molar ratio of C to CaC₂ is 3:1. The moles of CaC₂ produced are 1/3 × 0.849 mol = 0.283 mol
Step 4: Calculate the mass corresponding to 0.283 moles of CaC₂
The molar mass of CaC₂ is 64.10 g/mol.
0.283 mol × 64.10 g/mol = 18.1 g
What kind of reaction has the general form A+B → AB?
O A. Combination
OB. Decomposition
O C. Combustion
O D. Displacement
Pls help ASAP
Answer: combination (it is synonymous with synthesis)
An unknown substance visually appears to be a white powder. The substance is analyzed in the laboratory and its melting point is found to be 264 °C.
What can you predict about the intramolecular forces and intermolecular forces in this substance?
Answer:
See explanation
Explanation:
The substance under analysis must be a polar organic substance of high molecular mass. We must remember that as the magnitude of dispersion forces increases with increase in molecular mass, the melting point increases accordingly. Also polar organic substances have very high melting points due to the presence of polar bonds in the molecule..
Hence the intramolecular forces in the substance are covalent bonds while the intermolecular forces are both dispersion forces and dipole forces.
The substance may likely be 1,2,3,4,6,7,8-Heptachlorodibenzo-p-Dioxin which a white powder and melts at 264 °C.