Answer:
You can describe, the state, the color, the texture, and the odor of matter using your senses. ... As the motion of particles continues to increase, they move even farther apart. ... For example water is normally a liquid at room temperature. When it ... Gases have the most kinetic energy because their particles move very quickly.
Explanation:
Hopefully this helps!
Answer:
They vibrate in place and have very strong bonds.
Explanation:
All solids, in their form, have particles that vibrate in place and strong bonds to keep their form.
John is performing an experiment in which a solution alternates between a clear color and a bluish-purple color at a regular time interval. He observes that the time interval between color changes is 30 seconds (s). Sally replicates the experiment with the same solution, but at a temperature that is 10 degrees Celsius (°C) higher. What is the most likely time interval between color changes at this higher temperature? *
Answer:
15 sec
Explanation:
Match the term with the example that shows its definition [please].
Compressibility
Flammability
Heat of combustion
Toxicity
A) The burning of coal releases heat
B) Gasoline catches fire
C) Gas is squeezed into a small container
D) High lead levels in a lake kill fish
You observe 2 waves named alpha and beta. The alpha wave has a frequency of 5 Hz and the beta wave has a frequency of 2 Hz. Based on these observations which wave has a shorter wavelength? Group of answer choices
Answer:
shorter wavelength = alpha wave
Explanation:
Given that,
The alpha wave has a frequency of 5 Hz and the beta wave has a frequency of 2 Hz.
We need to compare the wavelengths of these two waves.
For alpha wave,
[tex]\lambda_1=\dfrac{c}{f_1}\\\\\lambda_1=\dfrac{3\times 10^8}{5}\\\\=6\times 10^7\ m[/tex]
For beta wave,
[tex]\lambda_2=\dfrac{c}{f_2}\\\\\lambda_2=\dfrac{3\times 10^8}{2}\\\\=15\times 10^7\ m[/tex]
From the above calculations, we find that the wavelength of the alpha wave is shorter than the wavelength of the beta wave.
If the pressure on the surface of water in the liquid state is
40 kpa, the water will boil at?
Answer:
sdfs
Explanation:
dfsdfsdfs
HeLlo, HeLp Me PleAsE, Ill MaRk YoU BrAiNlIeSt !
[tex]\huge\boxed{Option C}[/tex]
_____________________________________CALORIMETER:Calorimeter is device used for the measurement of heat. In a calorimeter we can use the temperature change of water to quantify an amount of heat. A calorimeter just captures all the energy released (or absorbed) by a reaction in the water. So Option A and B are wrong as calorimeter don't have anything to do with providing the heat or letting the the heat in, as it is the insulated calorimeter too.
_____________________________________Energy in the reaction:In the formation of any bond there is equal amount of heat required as to break that bond. It means Energy released in the making of bond is equal to the energy required in the breaking of the bond. So Option D is wrong as it says we need more energy in making then breaking.
_____________________________________Enthalpy:Enthalpy is the total heat content of the system. As we provide energy to the reactants and the product is formed, so The enthalpy(heat content) of product is more than the Enthalpy of the reactant, Thus Option C is correct.
Enthalpy is denoted by H or Q, its formula is,
H = U + PV
Where,
U is internal energy
PV is equals to Work done ; P = Pressure, V = Volume
_____________________________________Best Regards,'Borz'Devin had a bucket of shredded metals the metals consist of aluminum steel and copper he tried sorting the mixture by running it through a filter but this did not sort the mixture into separate components what can devin conclude
Answer:
Devin's problem can be solved by exploiting the activity series of metals.
Explanation:
This determines what metals are more reactive and would be readily displaced in a reaction.
Seeing as they are both metals scraps of similar sizes, filtration isn't a solution. But since Copper is lower on the activity series than Aluminium, adding an acidic solution (say tetraoxosulphate VI solution) to the mixture, would have aluminium in solution and Cu as residue which can then be filtered off.
I hope this was helpful.
When their is a new moon the sun and moon are on the same side of the earth this leads to a combination of gravitational forces causing usually high tides called
Neap tides
Low tides
Supreme tides
Spring tides
Answer:
Low Tides
Explanation:
Took the test
100%
can someone tell me how I find the atomic radius of atoms and what they are. Thank youuuuuuuuu
Answer:
The radius of an atom can only be found by measuring the distance between the nuclei of two touching atoms and then halving that distance. Measuring the atomic radii of chemical elements is a complicated task as the size of an atom is of the order of 1.2×10-10 m. The electron cloud forming the shell of an atom does not have any fixed shape which makes it difficult to determine the atomic size of an atom. So we can say that practically we cannot determine the size of an individual atom.
Atomic Radius:
Atomic radius is the distance from the center of the nucleus to the outermost shell containing electrons.
Explanation:
Why does a plant based diet provide fewer resources to produce
Answer: A plant-based diet requires less water to produce the food as it suppress all animal based products. In addition to consuming a lot of water to produce meat , livestock farming also pollutes water source because of the waste produced by the livestock ends up in waterways.
Explanation:
Answer:
I'm doing this so you can give smithpaige347 Brainliest
Explanation:
8. An atom of element Z has the
electronic configuration 2.8.6. Which
one of the following statements
about element Z is correct? *
Answer:
See explanation
Explanation:
The question is incomplete but i will try to answer it to the best of my ability.
An element of configuration 2.8.6 is in group 16. This element will form a divalent anion Z^2-
Z is a nonmetal which combines with metals to form ionic bonds. Z can also react with other non metals to form covalent compounds.
Z is expected to have high electronegativity and electron affinity since it is a nonmetal of group 16.
The oxides of Z will dissolve in water to yield acidic solutions.
is xenon a metal and is Beryllium a metal
Answer:
No and yes
Explanation:
Xenon is a noble gas and beryllium is a metal
Answer: no and yes i also agree
Xenon is a noble gas and Beryllium a metal
Explanation:
A mixture contains 20% iron ions by mass. What mass of iron chloride (FeCl) would
you need to provide the iron ions in 50 g of the mixture? A of Fe = 56, A of Cl = 35.5.
.
Mass of iron chloride (FeCl₂) : 22.68 g
Further explanationProust stated the Comparative Law that compounds are formed from elements with the same Mass Comparison so that the compound has a fixed composition of elements
In the same compound, although from different sources and formed by different processes, it will still have the same composition/comparison
With this law, we can calculate how many grams an element is needed to make a compound with a certain mass, as desired
[tex]\tt mass~Fe=\dfrac{Ar~Fe}{MW~FeCl_2}\times mass~FeCl_2[/tex]
The iron ions in 50 g mixture :
[tex]\tt 20\%\times 50~g=10~g[/tex]
[tex]\tt 10=\dfrac{56}{127}\times mass~FeCl_2\\\\mass~FeCl_2=22.68~g[/tex]
At which temperature and pressure would a sample of helium behave most like an ideal gas?
1
75 K and 500 kPa
2
150. Kand 500 kPa
3
300. Kand 50 kPa
4
600. K and 50 kPa
Submit Answer
Answer: 600K and 50kPa
Explanation:
600k as well as 50kPa since the pressure seems to be the lowest as well as the temperature is the greatest throughout this situation.
Under high temperatures and low pressures, actual gases behaved like ideal gases. such as the rule
[tex]PV=nRT[/tex]Even though at high temperatures, the kinetic energy of such gas particles surpasses the intermolecular attractive forces, — in other words this same potential energy of something like the molecules (gaseous).
Thus the above answer i.e., "option 4" is right.
Learn more:
https://brainly.com/question/1371338
PLS HELP
True or False: Water molecules, as a liquid, are very spread apart because of their attractions for one another. *
Answer:
False
Explanation:
Water molecules are spread up but slightly, enough that none of the molecules actually move freely around each other. Only gas and plasma molecules are very spread apart.
When energy is changed from one form to another, _____.
all of the energy is changed to a useful form
a physical change occurs
all of the energy can be accounted for
some of the energy is lost entirely
Answer:
some of the energy is lost entirely
Explanation:
The speed in which the moon orbits the earth is 500 mph.
a. True
b. False
Answer: False
Explanation: The moon travels at 1.42 mph around the Earth.
Answer:
false
Explanation:
Which electron notation is incorrect?
1s 2s 2p 3s 3p 10
1s 2s 2p 3s 3p3
1s2 282 2p 3s 3p6
Which of the following most completely describes a redox reaction?
O A. A chemical decomposition reaction
B. A hydrocarbon combustion reaction
O c. A reaction resulting in electron sharing
D. An oxidation and reduction reaction
Answer:
D.
Explanation:
Because i just copied the person above tbh, and i also got it right in the quiz
To solve such this we must know the concept of redox reaction. Therefore, the correct option is option D that is an oxidation and reduction reaction.
What is chemical reaction?Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, double displacement reaction.
Redox reaction is a chemical reaction where oxidation and reduction takes place simultaneously. Oxidation is loss of electrons and reduction is gain of electrons. The electron transfer from oxidant to reductant.
Therefore, the correct option is option D that is an oxidation and reduction reaction.
Learn more about the chemical reactions, here:
https://brainly.com/question/3461108
#SPJ2
Describe, in terms of electrons, the difference between a calcium atom and a calcium ion
The Calcium atom has 2 valence electrons but a Calcium ion will have no electrons because it is a cation ion. Meaning that there are more protons than electrons. Also, the normal calcium symbol is Ca but the calcium ion is Ca²⁺
I hope this wasn't too late
How do I do an energy profile diagram
Answer:
first u have to like draw like a number line uk how dey do in math but instead of num u add wht eva da question askin u
Explanation:
pls help me!!!!!!!
what are the elements found within the inner core of the earth??
im getting graded for this!! tyyyy
Answer:
Explanation:
iron
if your mass was 200 grams what would your weight be on this planet.
Answer:
200
Explanation:
Explanation:
take your weight times by the amount of newtons in a pound, which is 4.45
then convert newtons into grams.
PLEASE HELP! THIS A TIMED QUIZ!!
Scientists found an artifact that has 25% of Carbon-14 left. Based on how much Carbon-14 is remaining, how old is the artifact that was found?
A). 17,100 years
B). 5,700 years
C). 22,800 years
D). 11,400 years
Answer: D
Explanation:
If a sample of nitrogen gas is compressed to fit in a smaller container, what happens to the
pressure, assuming the temperature remains constant?
Answer:
The pressure increases
Explanation:
In this action it is best to apply Boyle's law to resolve the problem. This is an interplay between Volume, Pressure and Temperature.
According to Boyle's Law "the volume of a fixed mass of a gas varies inversely as the pressure changes, if the temperature is constant". Since the volume is being reduced to cram into the container, the pressure of the gases increases. In the smaller container, pressure rises and the volume reduces if temperature remains constant.HELP 20 points!
In a manufacturing process why would you prefer not to have a limiting reactant?
Answer:
The limiting reagent is the reactant that is completely used up in a reaction, and thus determines when the reaction stops. ... The limiting reagent is the one that is totally consumed; it limits the reaction from continuing because there is none left to react with the in-excess reactant.
Explanation:
The limiting reagent is the reactant that is completely used up in a reaction, and thus determines when the reaction stops. ... The limiting reagent is the one that is totally consumed; it limits the reaction from continuing because there is none left to react with the in-excess reactant.
PLEASE HELPPP :[
When a chemical change occurs a new substance is created. Harvey put hamburgers on his barbecue, and they cooked. He left fruit out on the counter and they started to rot.
What evidence about chemical changes can Harvey use to support the examples in his experiment?
A.The chemical changes occurred because the chemicals changed.
B. The chemical changes occurred because there was a change in light energy.
C. The fruit and the hamburgers were affected by an increase in heat energy.
D. The fruit and the hamburgers were affected by a decrease in heat energy.
Answer:
C. The fruit and the hamburgers were affected by an increase in heat energy.
Explanation:
One claim Harvey can use to support the examples from his experiment is that the hamburgers and fruits were affected by an increase in the heat energy.
This chemical change is one that is solely driven. This action Harvey is carrying out is cookingWhen meals are cooked, the raw substances undergoes chemical change via the action of heat.Answer:
btw it's not c
Explanation:
a fruit rotting or infected is a chemical reaction therefore,its close to d
What is the ionic charge of elements in column 1?
Answer:
こんにちは
Explanation:
For each element in the table below, use the Gizmo to find the number of valence electrons and the list the
valence based on the Lewis diagram. Then find the sum of these numbers.
IF SOMEONE COULD JUST HELP ME OR EXPLAIN HOW TO DO IT PLEASE! THANK YOU
Answer:
It's funny cause i'm doing the same exact thing as you.
Explanation:
You need to go to the Gizmo, and it explains everything. But When you're looking at "Valence Electrons" thats how many "dots" (electrons) there are on the outermost circle, so Fluorine has 7 Valence Electrons. To find the valency, you need to first identify the Valence Electrons. Fluorine has 7 valence electrons, and it would be a lot easier for this atom to gain an electron, rather than lose 7. So 8-7 is 1, meaning the Valency of Fluorine will be 1. For the sum, just add the total number, so 7+1 is 8, so the sum of Fluorine will be 8. This is confusing, so I'm sorry if this doesn't make sense.
Answer:
Explanation:
not sure if this is totally correct but checked with classmates and this seems to be around what most got
What is a chemical reaction
GIVING BRAINLYY
Tracy is looking at the section of the periodic table shown below. Based on the positions of sodium (Na) and potassium (K) in the table, Tracy can predict that sodium what?
[tex]\huge\boxed{Option B}[/tex]
____________________________________PERIODIC TABLE:The periodic table, arranges the chemical elements ascording to their recurring properties. The number of each element corresponds to the number of protons in its nucleus.
-------------------------------------------------------------------------------------------Groups and PeriodsThere are 8 groups and 7 periods in the periodic table.
_________________________________________________________
Each element within a group has similar physical or chemical properties because of its atom's outermost electron shell. The outermost shell of every element in a specific group has same number of valence shell (most chemical properties are determined by the the outermost valence shell electron). The group number of an element represents the number of electrons in its outermost orbit. This shows that elements arranged in the same group have the same number of electrons in their outermost orbit.
_____________________________________Sodium and PotassiumSodium and Potassium belong to the same group i.e. GROUP 1 which is also called S BLOCK Group or IONIC GROUP. They have the similar properties,
__________________________________________________________
Properties of S block Elements
1- They are soft metals
2- possess low melting and boiling points
3- They have the largest atomic radii in their corresponding periods
4- are good conductors of heat and electricity.
5- They have low values of ionization energies and are hence highly electropositive.
_____________________________________Best Regards,'Borz'