Which statement describes how this diagram could be changed so that it
shows an electromagnet?
so
Battery
Ammeter
A. Place a second battery between the ammeter and the wire coil.
B. Add a magnetic metal core inside the coil of wire.
C. Add magnetic field lines around the wire coil,
D. Move the ammeter to the other side of the wire coil.

Answer:

2.66 m/s² .

Explanation:

Initial velocity , u = 0 m/s

Final Velocity , v = 8 m/s

Time Taken , t = 3 s

So , Acceleration = (v-u)/t = (8 m/s - 0 m/s) /3 sec . = 8/3 m/s² = 2.66 m/s²

Answer: The choices?

Explanation:

Answer:

i think is a

Explanation:

Increasing the pressure would increase the boiling point of water at 100°C and at 1 atmospheres as increasing pressure will cause molecules to come close together and boil  at a higher temperature.

Pressure is defined as the force applied on an object perpendicular to it's surface per unit area over which it is distributed.Gauge pressure is a pressure which is related with the ambient pressure.

There are various units by which pressure is expressed most of which are derived units which are obtained from unit of force divided by unit of area . The SI unit of pressure is pascal .

It is a scalar quantity which is related to the vector area element with a normal force acting on it.It is distributed over solid boundaries and across arbitary sections of fluid normal to the boundaries at every point.

Learn more  about pressure,here:

https://brainly.com/question/18107358

#SPJ5

Answer:

C

Explanation:

Answer:

Newton’s Three Laws of Motion has a great impact.

Explanation:

Newton’s Three Laws of Motion has a great impact on the bowling game for the 2 students. When the student one throw ball to the student 2, the ball decrease its speed due to the gravity and opposing air. If these forces are removed from the system the ball will continue its motion till another force is applied on it. When the force applied to the ball it produces acceleration in the direction to the applied force. If the ball touches the ground it bounce back with equal force which is a reaction of the ground.

Answer:

That should be true because bile is ¨a bitter greenish-brown alkaline fluid that aids digestion and is secreted by the liver and stored in the gallbladder.¨

Explanation:

as the surface  area increases the rate of reaction  also increases.

Explanation:

Answer:

A.) The rate is faster.

C.) 28 Seconds

Answer:

B is the answer

Explanation:

When A is divided by 7x, it multiplies to0.81

Answer:

the answer is D

Explanation:

Since the velocity of the object is the derivative of the position graph, the area under the line in the velocity vs. time graph is the displacement of the object.

a)5m/s b)5

the 5 is because you add the seconds to get 8 seconds and then do the same with the distance to get 40. 40/8 = 5. speed = 5

Velocity = displacement/change in time

V = 40/8

I just realized how unorganised my math looks but I hope this is helpfull

Answer:

88.2 J

Explanation: Hope I helped <3

Answer:

The forces of push and pull

Explanation:

In the egg drop experiment, the egg is balanced on top of a toilet paper tube and balanced on a pan. The pan itself is placed on top of a glass of water. When the experimenter uses his hands to push the pan, the force of gravity pulls the egg downwards making it move down, right into the glass of water.

So the two forces which are applied in opposite directions are;

1. The force of push applied horizontally by the hand when it pushes the pan away, and

2. The force of pull caused by gravity which makes the egg move vertically downwards.

Answer:

Forces of push and pull

Answer:

20743.24 Nm¯²

Explanation:

From the question given above, the following data were obtained:

Initial pressure (P1) = 20000 Nm¯²

Initial temperature (T1) = 23 °C

Final temperature (T2) = 34 °C

Final pressure (P2) =?

Volume = constant

Next, we shall convert celsius temperature to Kelvin temperature. This can be obtained as follow:

T(K) = T(°C) + 273

Initial temperature (T1) = 23 °C

Initial temperature (T1) = 23 °C + 273 = 296 K

Final temperature (T2) = 34 °C

Final temperature (T2) = 34 °C + 273 = 307 K

Finally, we shall determine the final (i.e the new) pressure of the tyre.

Initial pressure (P1) = 20000 Nm¯²

Initial temperature (T1) = 296 K

Final temperature (T2) = 307 K

Final pressure (P2) =?

Volume = constant

Since the volume is constant, the final (i.e the new) pressure of the tyre can be obtained by using the following formula:

P1/T1 = P2/T2

20000 / 296 = P2 /307

Cross multiply

296 × P2 = 20000 × 307

Divide both side by 296

P2 = (20000 × 307) /296

P2 = 20743.24 Nm¯²

Therefore, the new pressure of the tyre is 20743.24 Nm¯²

Answer and Explanation in one:

In physics, potential energy is the energy held by an object because of its position relative to other objects, stresses within itself, its electric charge, or other factors. So basically, you could possibly demonstrate with a variety of examples. One example may be just sitting on a table, waiting to get rolled off. I know it sounds silly, so here's another example. You are holding a bow and arrow, you pull back the arrow, aiming at the target. You are holding the arrow, filling it with potential energy. When it is let go, it is kinetic energy, the act of an object in motion, slowly riding of it's potential energy.

Answer:

If the line is curved, the slope is changing, which also means the velocity is changing. In a distance-time graph, the gradient of the line is equal to the speed of the object. The more the gradient (and the steeper the line) the faster the object is moving.

Answer:

3

Explanation:

Answer:

A = 0.188 m²

Explanation:

First we find the distance between the plates by using the formula of electric field intensity:

E = ΔV/d

d = ΔV/E

where,

d = distance between plates = ?

ΔV = Potential Difference = 4 KV = 4000 V

E = Electric Field = 2 x 10⁸ V/m

Therefore,

d = 4000 V/(2 x 10⁸ V/m)

d = 2 x 10⁻⁵ m

Now, we find the Area of Plates by using formula of capacitance:

C = A∈₀∈r/d

where,

C = Capacitance = 0.25 μF = 0.25 x 10⁻⁶ F

A = Area of Plates = ?

∈₀ = Permittivity of free space = 8.85 x 10⁻¹² C/N.m²

∈r = Dielectric Constant = 3

Therefore,

0.25 x 10⁻⁶ F = A(8.85 x 10⁻¹² C/N.m²)(3)/(2 x 10⁻⁵ m)

A = (0.25 x 10⁻⁶ F)(2 x 10⁻⁵ m)/(3)(8.85 x 10⁻¹² C/N.m²)

A = 0.188 m²

Answer:

True

Explanation:

In a physical change such as melting, can change its form but the total mass will remain the same. For example, in a chemical reaction, the total mass of substances that react will equal the mass of the products. However, it is important to mention that some phase changes such as from solid to liquid, the mass of an ice will be turned to the liquid what and during this phase change period, the mass of the ice consequently decreases.

Answer:

Net Force is 92N and acceleration is 3.22 m/s/s

Explanation:

Fnet = Net force

FR = Force of friction

m = mass

a = acceleration

Fnet = ma

Fnet = F - FR = 302 - 210 = 92N

F - FR = ma

302 - 210 = (28.6)a

a = 3.22 m/s/s

Answer:

b. bird

i am pretty sure this is right, but i cant be sure bcause i  know what the sentence is.  

Answer:

daddy went to get milk really quick.

Explanation:

he will come back ;)

Answer:

i believe it is gravity

Explanation:

the gravitational force is a force that attracts any two objects with mass. it pulls things together does not pushes them.

Answer:

C. It keeps the electric current flowing in one direction.

Explanation:

just got it correct on my quiz.

The commutator in a DC generator keeps the electric current flowing in one direction option (C) is correct.

A direct current generator's principal job is to transform mechanical energy into electricity. Internal combustion engines, water, gas, steam turbines, and even hand cranks are all sources of mechanical energy for DC generators.

The commutator in a DC generator converts the alternate current into the direct current.

Thus, the commutator in a DC generator keeps the electric current flowing in one direction option (C) is correct.

Learn more about the DC generator here:

https://brainly.com/question/17144871

#SPJ2

Answer:

B because I remember that's what peer pressure is

Answer:

C

Explanation:

I think it is C because peer pressure is doing something you don't want to do and you think it is wrong to do that, but it could aslo be B.  

Answer:

Explanation:

Visible light has a wavelength that ranges from 380 nm – 750 nm on the electromagnetic spectrum while infrared light is just beyond it, ranging from 700 nm – 1 mm, the start of the non-visible portion of the spectrum. As a result, infrared cannot be seen except with special equipment like a security camera

Visible light is the common lighting method and we see it all around us. It is used in homes, work areas, factory floors, parking lots, loading docks, etc. They are also used as warning systems and to provide lighting for CCTV cameras in public places. The presence of floodlights warns intruders that their actions are being monitored.

Infrared light, however, is used when the intention is to monitor intruders covertly. Without a bright light to warn them about the presence of security cameras, intruders no longer feel the need to avoid surveillance, leaving them exposed to the IR-illuminated cameras.

Answer:

1. For humans, we can only see visible light, but can't see infrared.

2. Infrared have longer wavelengths than visible light.

Explanation:

The force acting on an object given it's mass and acceleration can be found by using the formula

force = mass × acceleration

From the question we have

force = 6 × 4

We have the final answer as

Hope this helps you

Answer:

24 n is the answer

Answer:

Explanation:

A)  The function of a switch is to shut the circuit down. There is a current flow of zero. Press the switch again and the circuit works.

Answer: D

B) a. This is a parallel circuit. It is the way all house wiring works.

B) b. Nothing happens. The other two bulbs continue on as before until someone presses the switch.