Which statement is true about the potential energy diagram for an endothermic reaction? (5 points)
The potential energy of the products is equal to the potential energy of the reactants.
It starts at a higher energy value and ends at a lower energy value.
The energy value remains the same throughout the diagram.
Products have more potential energy than reactants.
Answers
Answer:
Products have more potential energy than reactants.
As shown in the image.
Related Questions
Question (1 point)
Given the model, answer the following questions regarding effusion. The orange spheres have a greater root-mean-square speed than the blue spheres. Assume the balloon has a tiny opening for gas molecules to escape.
1st attempt
Part 1 ( 0.5 point)
See Periodic Table See Hint
Which balloon, A or B, most accurately illustrates the effusion of a gas from the central balloon?
Calculate the relative rate of effusion for the orange to blue spheres. The root-mean-square speed for the orange spheres is 495.0m/s. The root-meah-5quare speed for the blue spheres is 380.0m/ s.
Answers
According to the claim, Balloon A, which has more blue and less orange, exhibits accurate effusion at a relative effusion rate of 1.303. (orange is 1.303 times more effused than blue).Relative rate of effusion for the orange to blue spheres = 1.531.
What is effusion ?The process of effusion is when a gas escapes from a container through a hole that is significantly smaller in diameter than the molecules' mean free path.
Gas molecules flow through a small opening in one container and into another by effusion. Graham's law allows rates of effusion to be compared at the same temperature. Diffusion is the random molecular motion-based movement of gas molecules through one or more other types of gas.
Rate of effusion of Orange / Rate of effusion of blue
= [Mblue / Morange]^1/2
Vrms = sqrt [(3RT/M)]
Vorange / Vblue = [ Mblue / Morange]^1/2
Rate of effusion of Orange / Rate of effusion of blue
= 565/ 369
= 1.531
Thus, Balloon A, which has more blue and less orange, exhibits accurate effusion at a relative effusion rate of 1.303.
To learn more about the effusion, follow the link;
https://brainly.com/question/26882632
#SPJ1
For the reaction H2(g) +O2(g) — H2O (g) how many liters of water can be made from 5 L of oxygen gas at 37.0 Celsius, 1.76atm and an excess of hydrogen?
Answers
Answer:
12.5 L
Explanation:
Part 1 - Finding Number of moles
First thing we need to find out is number of moles of oxygen gas. We can achieve this using the formula: PV=nRT
Pressure (Pa) x Volume (cubic meters) = no. moles x gas constant (8.31 J/K*mol) x Temperature (K)
We can rearrange this formula to solve for no. moles:[tex]n=\frac{PV}{RT}[/tex] and plug in the values to solve.
1 atm = 1.01325 x 10^5 Pa, therefore 1.76atm = [tex]1.76*1.01325*10^{5} =178332Pa[/tex]
1 L = 1 x 10^-3 m^3, therefore 5L = [tex]5*1*10^{-3}=5*10^{-3}m^{3}[/tex]
Finally Kelvin = Celsius + 273.15, therefore 37.0C = [tex]37.0+273.15=310.15K[/tex]
Substituting this all back into the formula we get:
[tex]n=\frac{(178332)(5*10^{-3})}{(8.31)(310.15)}[/tex]
[tex]n=\frac{891.66}{2577.3465}[/tex]
[tex]n=0.346[/tex] moles (3.s.f)
Part 2 - Balancing Equation
The equation given is not balanced so we need to balance it to find the correct molar ratio. We can start by balancing the oxygens as there are less of them. We can see that there are 2 oxygen atoms on the left as denoted by 'O2' but only one on the right in 'H2O', therefore we can add a two in front of the H2O on the right side to balance the oxygen atoms:
[tex]H_{2(g)} +O_{2(g)} - > 2H_{2} O_{(g)}[/tex]
Now we have four hydrogens on the right side so we have a 2 in front of H2 on the left hand side to balance the hydrogens:
[tex]2H_{2(g)} +O_{2(g)} - > 2H_{2} O_{(g)}[/tex]
And voila! The equation is balanced and shows the correct molar ratio.
Part 3 - Calculating moles of water
As we can see from the molar ratio in the balanced equation, every mole of O2 will produce two moles of H2O- the ratio is 1:2. As we have an excess of hydrogen, we only need to worry about the amount of oxygen we have. Therefore to calculate the number of moles of water that can be made we simply need to multiple by the ratio:
[tex]0.346*2=0.692[/tex] moles of water
Part 4 - Converting to Liters
Finally, to convert our amount of moles into volume, we can use water's molecular mass to find the mass and then its density to find its volume. Water's molecular mass is 18.02gmol^-1 (2x1.01+16.00) and its density is 997kg/m^3.
m=nM (mass = no. moles x molecular mass): m=[tex]0.692*18.02=12.46984g[/tex]
rho = m/v (density = mass/volume): [tex]997=12.46984/v[/tex], therefore [tex]v=0.0125m^{3}[/tex]
Finally as mentioned above, 1 L = 1 x 10^-3 m^3, therefore the volume of water that can be made is 12.5 Liters.
2. A small block of a metal with a mass of 223.1 grams when
submerged in a beaker containing water, the water level rises to
150.0 mL as shown in the figure here. If the density of the metal
block is 7.41 g/cm³ at 22°C, then what was the original water level
in the beaker?
Water leve
150 mL
Answers
The volume of the metal block can be calculated using the density and mass of the block is 30.0 cm³
What is metal block?A metal block is a solid piece of metal that is typically used for machining and other industrial applications. It is usually made from aluminum, steel, or other metals, and can be machined into a variety of shapes and sizes depending on the application. Metal blocks are also used for casting, forging, and other manufacturing processes. Metal blocks may also be used for decorative purposes, such as sculpture or engraving. They are also used in jewelry making and engraving, as well as in medical and dental applications.
The volume of the metal block can be calculated using the density and mass of the block:
Volume = Mass/Density = 223.1 g/7.41 g/cm³ = 30.0 cm³
Since the metal block was submerged in the water, the volume of the block will be added to the volume of water in the beaker. Therefore, the original water level in the beaker can be calculated using the following equation:
Original Water Level = 150 mL + (30.0 cm³/1000 cm³/mL) = 180.0 mL
To learn more about metal block
https://brainly.com/question/30142110
#SPJ1
7
QUICK CHECK
Predicting Spontaneity
Identify each of these reactions as being spontaneous or nonspontaneous.
2C₂H₂(g)+50₂(g) → 4CO₂(g)+2H₂O(g)
AG-2,453.1 kJ
3H₂(g)+N₂(g) → 2NH₂(g)
CO₂(g) +2H₂O(g) → CH₂(g) +20₂(g)
DONE
AG=-33.3 kJ
AG=800.7 kJ
Answers
1. The reaction: 2C₂H₂(g) + 5O₂(g) → 4CO₂(g) + 2H₂O(g) ΔG = -2,453.1 KJ is spontaneous
2. The reaction: 3H₂(g) + N₂(g) → 2NH₂(g) ΔG = -33.3 KJ is spontaneous
3. The reaction: CO₂(g) + 2H₂O(g) → CH₂(g) + 2O₂(g) ΔG = 800.7 KJ is nonspontaneous
How do I determine which reaction is spontaneous or nonspontaneous?The Gibbs free energy is a core factor in determining whether a reaction is spontaneous or nonspontaneous. Gibbs free energy is given by the following formula:
ΔG = ΔH – TΔS
Where
ΔG is the Gibbs free energy ΔH is the enthalpy changeT is the temperature ΔS is the change in entropyNOTE
ΔG = Positive (non spontaneous) ΔG = Zero (equilibrium) ΔG = Negative (spontaneous)With the above information, we can determine which of the reaction is spontaneous and also the one which is nonspontaneous as shown below:
2C₂H₂(g) + 5O₂(g) → 4CO₂(g) + 2H₂O(g) ΔG = -2,453.1 KJ. The reaction is spontaneous since ΔG is negative3H₂(g) + N₂(g) → 2NH₂(g) ΔG = -33.3 KJ. The reaction is spontaneous since ΔG is negativeCO₂(g) + 2H₂O(g) → CH₂(g) + 2O₂(g) ΔG = 800.7 KJ. The reaction is nonspontaneous since ΔG is positiveLearn more about spontaneity of reaction:
https://brainly.com/question/9552459
#SPJ1
3. Silances are more reactive than alkanes. Explain.
Answers
The lower bond energy of the silicanes make them more reactive than the alkanes.
What are the silicanes?We know that the members of group four has the ability to catenate and this is a property that characterizes all the elements that we can find in the group. However the extent to which the members of the group can be able to catenate is what we use to determine the stability of the bonds.
The alkanes are composed of the bonds that exist between carbon and hydrogen and the alkanes can be able to form very long chains and this can be used to explain the fact that you can be able to find the alkanes in various kinds of applications.
However, the bond energy of the silicanes is less than that of the alkanes hence they tend to be more reactive then the alkanes.
Learn more about alkanes:https://brainly.com/question/3648919
#SPJ1
When the conductivity is at a minimum, what must be true about the amount of Ba(OH)2?
Answers
When the conductivity is at a minimum, the true thing about the amount of Ba(OH)₂ is that the amount of the two reactants are the same when conductivity is low.
What is conductivity?The ability of an aqueous solution to carry an electric current is measured by its conductivity. Ionic strength is measured by conductivity monitors. In automated chromatography systems, conductivity is the main input control parameter used to enable the generation of salt gradients or to control buffer dilution or in-line buffer preparation.
Conductivity monitors can be used to automate and monitor cleaning and equilibration procedures. It's important to remember that temperature affects measurements of conductivity and pH.
When conductivity is low, the amounts of the two reactants are equal. Between the reactants, there are no excesses. The aqueous solution cannot dissolve the precipitate BaSO₄. Since there are no ions, the conductivity is at its lowest.
Learn more about conductivity on:
https://brainly.com/question/1851658
#SPJ1
Complete question
The Ba(OH)₂ dissociates as Ba+2 + 2 OH-. H₂SO₄ dissociates as 2 H+ + SO₄-2. When the conductivity is at a minimum, what must be true about the amount of Ba(OH)₂ compared to H₂SO₄
18-38 Name the following ketones and aldehydes. When possible, give both a common name and an IUPAC name.
(a) CH₃CO(CH₂) ₄CH₃
(b) CH₃(CH₂)₂CO(CH₂)₂CH₃
(c) CH₃(CH₂)CHO₅
(d) PhCOPh
(e) CH₃CH₂CH₂O
(f) CH₃COCH₃
(g) CH₃CH₂CHBrCH₂CH(CH₃)CHO
(h) Ph --- CH = CH ----CHO
(i) CH₃CH= CH---CH = CH --CHO
Answers
The IUPAC name of the following organic compounds are,a) hept-2-one b) hept-4-one c) heptanal d) diphenylmethanone e) propan-1-one f) acetone g) 3-bromo-1-hexanal h) 3-phenylprop-2-enal i) 2,4-hexdiene-1-al.
What is a compound?Compound is defined as a chemical substance made up of identical molecules containing atoms from more than one type of chemical element.
Molecule consisting atoms of only one element is not called compound.It is transformed into new substances during chemical reactions. There are four major types of compounds depending on chemical bonding present in them.
They have a unique chemical structure held together by chemical bonds Compounds have different properties as those of elements because when a compound is formed the properties of the substance are totally altered.
Learn more about compound,here:
https://brainly.com/question/13516179
#SPJ1
PROBLEM 1.22 Give the hybridization state of each carbon in the following
compounds:
(a) Carbon dioxide (0 = C = O)
(d) Propene (C*H_{3}*CH = C*H_{2})
(b) Formaldehyde (H_{2}*C = O)
(e) Acetone [(CH 3 ) 2 C = OI
(c) Ketene (H_{2}*C = C = O)
(f) Acrylonitrile ( C*H_{2} =CHC equiv N)
SAMPLE SOLUTION
(a) Carbon in C*O_{2} is directly bonded to two other atoms. It
is sp-hybridized.
Answers
To solve this we must be knowing each and every concept related to hybridisation. Therefore, the hybridisation of the given molecule can be given as below.
What is hybridisation?Only during bond formation does hybridization occur, not in an individual gaseous atom. If the bonding of a molecule is known, the geometry of the molecule may be predicted.
compound hybridisation
Carbon dioxide (0 = C = O) sp
Propene (CH[tex]_3[/tex]CH = CH[tex]_2[/tex]) sp³, sp²,sp²
Formaldehyde (H[tex]_2[/tex]C = O) sp²
Acetone [(CH[tex]_3[/tex] )[tex]_2[/tex] C = O sp³, sp², sp³
Ketene (H[tex]_2[/tex]C = C = O) sp², sp
Therefore, the hybridisation of the given molecule can be given as above.
To learn more about hybridisation, here:
https://brainly.com/question/29290058
#SPJ1
Combustion of 1.125 of an unknown compound containing carbon, hydrogen, and oxygen resulted in 1.649g of CO2 and 0.675g of H2O. If the molar mass is 180g/mol What is the molecular formula?
CxHyOz + O2 → CO2 + H2O
Answers
The molecular formula of the unknown compound, given that it contains carbon, hydrogen, and oxygen is C₆H₁₂O₆
How do I determine the molecular formula?First, we'll begin by obtaining the mass of carbon, hydrogen and oxygen. Details below:
For Carbon
Mass of CO₂ = 1.649 gMolar mass of CO₂ = 44 g/mol Molar of C = 12 g/mol Mass of C =?Mass of C = (12 / 44) × 1.649
Mass of C = 0.45 g
For Hydrogen
Mass of H₂O = 0.675 gMolar mass of H₂O = 18 g/mol Molar of H = 2 × 1 = 2 g/mol Mass of H =?Mass of H = (2 / 18) × 0.675
Mass of H = 0.075 g
For Oxygen
Mass of compound = 1.125 gMass of C = 0.45 gMass of H = 0.075 gMass of O =?Mass of O = (mass of compound) - (mass of C + mass of H)
Mass of O = 1.125 - (0.45 + 0.075)
Mass of O = 0.6 g
Next, we shall determine the empirical formula. details below:
C = 0.45 gH = 0.075 gO = 0.6 gEmpirical formula =?Divide by their molar mass
C = 0.45 / 12 = 0.0375
H = 0.075 / 1 = 0.075
O = 0.6 / 16 = 0.0375
Divide by the smallest
C = 0.0375 / 0.0375 = 1
H = 0.075 / 0.0375 = 2
O = 0.0375 / 0.0375 = 1
Thus, the empirical formula of the compound is CH₂O
Finally, we shall determine the molecular formula. Details below:
Molar mass of compound = 180 g/molEmpirical formula = CH₂OMolecular formula =?Molecular formula = empirical × n = mass number
[CH₂O]n = 180
[12 + (2×1) + 16]n = 180
30n = 180
Divide both sides by 30
n = 180 / 30
n = 6
Molecular formula = [CH₂O]n
Molecular formula = [CH₂O]₆
Molecular formula = C₆H₁₂O₆
Learn more about molecular formula:
https://brainly.com/question/21568927
#SPJ1
A dairy is mainly involved in the operations of bottling of milk, making ice-cream and limited production of cheese. Calculate the BOD produced per 1000kg of milk processed and its population equivalent from the following data;
Quantity of milk processed daily=150000kg Waste water produced daily =240m3 BOO of waste water =1400mg/I Population equivalent per capita per day of 5-days BOD at 20C°=75g
Answers
Answer:
BOD produced per 1000kg of milk processed = (1400mg/I x 240m3) / 150000kg = 0.192mg/I
Population equivalent = (0.192mg/I x 75g) / 5 = 0.576g
Explanation:
2. The nonmetals in the Groups 16 and 17________.
a) lose electrons when they form ions
b) gain electrons making them an anion
c) all have ions with a -1 charge
d) end in -ate
Answers
The nonmetals in the Groups 16 and 17 gain electrons making them an anion.
Why gaining electrons is a significant characteristic of nonmetals in Groups 16 and 17?The nonmetals of group 16 are made up of Oxygen, Sulfur, and Selenium whereas group 17, also called the halogen group is made up of Fluorine, Chlorine, etc.
The further right we go in the periodic table, the atomic size decreases. Due to the increase in the number of protons, the electrons are more tightly bound and the atom shows strong attraction to electrons.
The gain of additional electrons helps in the completion of octets for the atoms further making their configuration stable, and more alike to that of the noble gases.
To learn more about electron gain click here:
brainly.com/question/14351799
#SPJ1
If 160 grams of a 200-gram sample of gold-198 decay in 6.25 days, what is the half-life of gold-198?
Answers
The half-life of gold-198 is 2.77 days
What is half-life of gold-198?Gold-198 decays with a half-life of 2.7 days to stable mercury-198 by emission of ß particles of maximum energy 0.960 Mev and Y -rays of energies 0.412, 0.68 and 1.09 Mev as shown schematically in In a gold grain, the thickness of the enveloping sheath of platinum is such that the ß particles: The amount of time it takes to disintegrate by half an initial amount. For a given reaction, a reactant's half-life t1/2 is the time it takes for its concentration to reach a value which is the arithmetic mean of its initial and final (equilibrium) value.Since Au-198 is 200 g originally and it decays to 160 g, so 40g leftthe fraction decay is 40/200 = 0.2the time base is 6.25 daysln0.2/6.25 = -0.25k=ln2/half life therefore half-life = ln2/k = ln2/0.25half life = 2.77 daysSo, half life of gold is 2.77 daysTo learn more about half-life of gold-198 refers to:
brainly.com/question/28174852
#SPJ1
Explain how an incorrect of dietary information on high blood sugar could potentially affect the patient’s
Answers
Long-term (months or years) high blood sugar levels can cause irreversible harm to organs such the kidneys, blood vessels, eyes, nerves, and nervous system. Speak with your doctor or the diabetes care team if you frequently have hyperglycemia.
What effects could an extremely high blood sugar level have on us?If left untreated, having excessive blood sugar levels for an extended length of time might lead to major health issues. In addition to raising the risk of heart disease, stroke, kidney illness, vision issues, and nerve issues, hyperglycemia can harm the blood arteries that provide blood to essential organs.
What dietary requirements are impacted by diabetes?A high-fat, high-calorie, and high-cholesterol diet
To know more about high blood sugar visit:-
https://brainly.com/question/29749982
#SPJ1
I need help in this please
Answers
it reflects back into the glass with a 45 degree angle of reflection.
What is refraction?The direction of the light changes as it passes through the air-water barrier. Refraction is the name for this phenomenon. Filling a glass with water and inserting a straw will make it simple to see. It will seem as though the straw is shattered.
Because light travels at a different speed in air and water, refraction takes place. The electromagnetic properties of a specific medium, which differ for air and water, determine the speed at which a light wave propagates in that medium. The speed of light in the air is very near to the vacuum's speed of light, which is 3*108 m/s. The speed of light is slower underwater. Consequently, The direction of the light changes as it passes through the air-water barrier. Refraction is the name for this phenomenon. Filling a glass with water and inserting a straw will make it simple to see. It will seem as though the straw is shattered.
A form of break occurs in the wavefront of propagating light when it encounters the air-water barrier, causing the ray of light to diverge from its original path. (Please go to the reference link for a more thorough explanation and instructions on how to calculate the light's refraction angle.)
Learn about Refraction here: https://brainly.com/question/27932095
#SPJ1
Which of these is an example of a physical property?
A. Potassium ignites when placed in water.
B. Iron melts at 1,535 °C.
C. Hydrogen combines with oxygen to form water.
D. Chlorine oxidizes bacterial cells.
Answers
Answer: B is correct.
Explanation:
Answer A is a chemical change because of intense changes of color and expansion.
Answer C is a chemical change, as hydrogen and water are chemically bonding together.
Answer D is a chemical change because oxidation involves loss of electrons during a chemical reaction.
On the other hand, melting is a physical change. Therefore, answer B is the correct answer.
I need help please in this:(
Answers
Answer:
That would be A sir or Miss
Explanation: Tell me if I am wrong, Also hope this helped you!
what is van't hoff factor?
state the formulas to calculate " i " during association or dissociation.
tysm! :)
Answers
The relationship between the calculated concentration of a material and the actual concentration of particles is known as the Van't Hoff factor.
I is the difference between a typical or theoretical colligative quality and an observable one.
What does the connection van t Hoff factor mean?The van 't Hoff factor is the difference between the concentration of a material determined by its mass and the concentration of particles actually formed when the substance is dissolved. The van 't Hoff factor is virtually 1 for the majority of non-electrolytes dissolved in water.
What does Van t Hoff factor mean in terms of connection and dissociation?For dissociation, association, and the non-electrolyte solute, the Van't Hoff factor value is more than one, less than one, and equal to one respectively.
to know more about concentration visit :-
https://brainly.com/question/12970323
#SPJ1
Chemicals released into the air from human activity, such as sulfur dioxide and nitrous oxide, interact with the atmosphere to make acid rain.
in which atmosphere layer does this process happen?
A, thermosphere
B, mesosphere
C, troposphere
D, stratosphere
I NEED HELP ASAP!!!!!!
Answers
Troposphere atmosphere layer does this process happen The acidity of rainwater comes from the natural presence of three substances (CO2, NO, and SO2) found in the troposphere
What is troposphere?The lowest part of Earth's atmosphere is called the troposphere. The troposphere contains the majority of the mass of the atmosphere (about 75–80%). The troposphere is where most clouds of all varieties may be found, and this is also where most weather takes place.The lowest portion of our atmosphere is called the troposphere. It begins below the surface and rises to a height of roughly 10 kilometers (6.2 miles, or about 33,000 feet) above sea level. The troposphere, where we are located, is the lowest layer where most weather happens.Most weather occurrences occur in the troposphere, which is the first and lowest layer of the Earth's atmosphere. It includes 99% of the planet's water vapour and aerosol mass and 75% of the total mass of the planetary atmosphere.To learn more about troposphere refers to:
brainly.com/question/30126863
#SPJ1
consider this a reaction 2H+ + CO3²- → H₂O + CO₂ . Identify each of the following as a product, a reactant, or a coefficient.
Answers
The reactant, product and coefficient of the chemical equation are 2H⁺ and CO₃², H₂O and CO₂ and 2 respectively. Chemical reaction is the reaction between two or more substances to form a new substance.
How do you identify a product and reactant?The left side of the equation lists reactants as the initial materials. The right-hand side of the equation lists the products, which represent the outcome of the reaction. Products are the compounds created during a chemical reaction, whereas reactants are the substances that cause the reaction. The general chemical formula can be used to express a chemical reaction. During chemical reactions, bonds disintegrate and reassemble. Additionally, the reverse response takes place. Reactants and products are involved in every chemical reaction. In a combustion reaction, the reactants are air and candle wax. Products are the compounds created during a chemical reaction, whereas reactants are the substances that cause the reaction.To learn more about product and reactant refer to:
https://brainly.com/question/11424888
#SPJ1
What is a flame test used for?
A. To identify an unknown sample by its emission spectrum
B. To determine the ionization energies of electrons
C. To remove impurities from a sample through burning
D. To identify an unknown sample by its melting point
Answers
The flame test used for to identify an unknown sample by its emission spectrum
What is the purpose of a flame test?A metal or metalloid ion discovered in an ionic compound can be identified, or at least its potential identification, using the flame test, a qualitative chemical test. It's possible for the compound to emit a distinctive colour that may be seen with the unaided eye if it's placed in a gas burner's flame. To determine whether metal and metalloid ions are present in the sample, chemists employ a qualitative examination known as a flame test. The metal ions heated in the gas burner don't all produce colour. The quickest and most straightforward method for determining whether group 1 metal ions are present in the chemical is a flame test. A wire or wooden splint is dipped into a sample solution or coated with the substance to be tested.To learn more about flame test refers to:
brainly.com/question/26873482
#SPJ1
Answer: to identify an unknown sample by its emission spectrum
Explanation:
Which of these is an example of a physical property?
A. Iron combines with oxygen to rust.
B. Potassium reacts in water to form a base.
C. Sodium metal is soft and malleable.
D. Sodium ignites when placed in water.
Answers
Which fuels are non-renewable
Answers
Answer:
fossil fuels
Explanation:
Well I had some topics on this stuff last quarter in science and from what I can remember it should be fossil fuels I think that fossil fuels are technically renewable but they are considered non-renewable since they are either in small supplies, are hard to obtain or take a long time to form.
How to solve this problem? I am stuck
Answers
The functional group of molecules as follows :
Molecule 1. is aldehyde and ketone, Molecule 2 is acid and thio, Molecule 3 is acid and amide, Molecule 4 is alcohol and ether, Molecule 5 is Alcohol and acid. The image attached below show the functional group and molecules are labeled.
What is polar compound ?The polar compounds are those compound having different positive and negative charge, therefore the bonding with atoms such as nitrogen, oxygen, or sulfur.
A buffer is a solution the can control the pH change along with the addition of an acidic or basic substance. It is able to neutralize small amounts of added acid or base, So it maintains the pH of the solution. This is important to maintain pH ranges.
Thus, Molecule 1. is aldehyde and ketone, Molecule 2 is acid and thio, Molecule 3 is acid and amide, Molecule 4 is alcohol and ether, Molecule 5 is Alcohol and acid.
To learn more about the polar compound, follow the link;
https://brainly.com/question/29869649
#SPJ1
A fluid flowing in a pipe has 1.05 in diameter. If the fluid has density, viscosity and
volumetric flow rate are 62.3 , 1.2 cP and 35 gpm respectively. Calculate: 3
a) The velocity.
b) Reynolds number ()
[2]- Find the following
a) Drive an expression to find a pressure of methane gas at point B b) If the temperature of methane is 100 F, Calculate pressure of
methane gas at point B.
c) Calculate pressure of oil at point C.
PA = 1, 000 psig
[3]- If the water is pumped down one well and the displaced oil which flows up through well exit (see the fig below), drive an expression to find a pressure of inlet water Pw needed to displace oil when the water/oil interfacial tension σ is applied.
Answers
Velocity is a vector quantity that describes the rate and direction of an object's motion.
a) The velocity of the fluid:
V = 35 gpm / (π * (1.05 in)^2 / 4) = 7.09 ft/s
b) Reynolds number:
Re = (62.3 lbm/ft^3 * 7.09 ft/s * 1.05 in) / (1.2 cP) = 4,211.9
[2]- a) Expression to find pressure of methane gas at point B:
PB = PA + rgh
b) Pressure of methane gas at point B:
PB = 1,000 psig + (0.072 lbm/ft^3 * 32.2 ft * 0.0689 psia/ft) = 1,233.5 psig
c) Pressure of oil at point C:
PC = PB - 0.433 psia/ft * 32.2 ft = 1,093.3 psig
[3]- Expression to find pressure of inlet water Pw needed to displace oil:
Pw = PC + (σ / r) * (h2 - h1)
Pw = 1,093.3 psig + (σ / 0.072 lbm/ft^3) * (32.2 ft - 0 ft) = 1,093.3 psig + (σ / 0.072 lbm/ft^3) * 32.2 ft.
What is velocity?
Velocity is a vector quantity that describes the rate and direction of an object's motion. It is commonly represented by the symbol 'v' and is measured in meters per second (m/s). Velocity includes both the speed and the direction of the object. For example, if an object is moving north at 10 m/s, its velocity would be 10 m/s north. Velocity can also be determined by taking the derivative of the position function with respect to time.
To know more about velocity,
https://brainly.com/question/80295?source=archive
#SPJ1
when might the BAC of a dead body be misleading or unhelpful
Answers
Answer: Blood alcohol levels at autopsy are valid up to 48 hours after death when simple principles are observed in the collection and storage of samples. Alcohol levels in samples of blood taken from the intact heart are as significant as levels of blood from the femoral veins.
Explanation:
Answer:
If the victim was submerged in water
Explanation:
Help me please please i is in middle school need help ple
Answers
the answer is that it is a
Why don’t different varieties of corn plants grow to the same size under similar growing conditions?
Answers
An experiment requires 65.00 g of sodium chloride. Sodium chloride is available at a price of $179.0 per 5.000 kg sodium chloride. What is the cost of the sodium chloride in the experiment (reported to the hundredths place because we're working with dollars)?
Answers
Answer: on
Explanation:5
The price of sodium chloride per 5 kg is 179 dollars. The experiment requires 65 g of NaCl. The price of65 g or 0.065 kg is 2.3 dollars.
What is sodium chloride?Sodium chloride is an ionic compound formed by the combination of sodium metal and chlorine atom. Sodium metal has extra one electron in its valance shell and chlorine needs one more electron into its valence shell. Hence sodium donates its valence electron to chlorine forming NaCl.
NaCl is used as the table salt in food. It is a very important compound in our daily diet. Similarly NaCl is industrially important for many reaction especially in electrochemical processes.
It is given that, the price of 5 kg of NaCl = $179
required mass of NaCl = 65 g = 0.065 Kg
then , price of 0.065 kg = (0.065 × 179 /5) = $2.31
Therefore, the cost of NaCl in the experiment is 2.31 dollars.
Find more on NaCl:
https://brainly.com/question/4487559
#SPJ2
What is the mass of a 8.45 m3 piece of copper?
Answers
The mass of a 8.45 m3 piece of copper is 7537.4 grams.
What is mass?Mass is described as a dimensionless quantity representing the amount of matter in a particle or object.
density of copper =8.92g/cm^3
volume = 8.45 x 100 cm^3
mass = (8.45 x 100) x 8.92
mass = 7537.4 grams.
The relationship between mass, density and volume is that density offers a convenient means of obtaining the mass of a body from its volume or vice versa.
This means that the mass is equal to the volume multiplied by the density (M = Vd), while the volume is equal to the mass divided by the density (V = M/d).
Learn more about mass at: https://brainly.com/question/19385703
#SPJ1
Antigens are substances that may induce immune response as they are recognised and bound by antibodies or cells of the immune system.
Based on your knowledge of the structures of bacteria and viruses, can you suggest some examples of molecules that are antigenic?
Answers
Some examples of molecules that are antigenic may be proteins and or polysaccharides in the cell wall of pathogenic bacteria which may be targeted by the immune system during the production of antibodies.
What is the relationship between antigens in pathogenic bacteria and antibodies of the immune system?The relationship between antigens in pathogenic bacteria and antibodies of the immune system is based on the fact that antigens are biomolecules in the pathogens that can be targeted to bond antibodies that are produced by the organism in immune responses against bacteria, viruses, and allergens in the air and foods, etc.
Therefore, with this data, we can see that antigen molecules be any type of biomolecule present in the pathogen and the relationship between antigens in pathogenic bacteria and antibodies of the immune system is based on the binding between them (antigens and antibodies) which is fundamental during certain specific immune responses.
Learn more about antigens here:
https://brainly.com/question/7597406
#SPJ1