In the given explanations, Newton’s law of universal gravitation can be explained by the statement, "Heavier objects fall faster than lighter objects". Thus, Option A is the correct answer.
What is Universal Law?Gravity is a natural phenomenon that causes all massive objects to attract each other. The magnitude or force of this interaction depends on the masses and distance of the bodies. This causes objects to fall toward Earth, for example, and keep satellites and celestial bodies in their orbits, such as the Earth's orbit around the Sun. Gravity also causes the tidal phenomenon.
In physics, gravity can be approximated by Isaac Newton's laws of gravity. Although the accuracy of the law is sufficient, for example, when calculating the orbits of spacecraft, gravity is best described by Albert Einstein’s general theory of gravity, in which it is considered the curvature of space-time.
Newton's law of universal gravitation states that a particle attracts every other particle in the universe with a force which is directly proportional to the product of their masses and inversely proportional to the square of the distance between their centers.
Hence, Option A is the correct answer.
Learn more about Law of gravitation,
https://brainly.com/question/24190883
#SPJ1
dielectric breakdown in air occurs when the electric field is approximately 3 × 106 v/m. t or f
There is an air dielectric breakdown (10 mT). This happens when air (a dielectric) breaks down and charges are transferred from the sky to the earth.
How to fix?In an electromagnetic wave, the connection between the strength of the electric and magnetic fields is E=cB.
where E is the size of the electric field.
The speed of light is c.
B is the magnetic field's strength.
E=3.106V/m is the electric field, and c=3.108m/s is the speed of light in this equation.
When we solve for B, we get B=E/c=3.106 V/m/3.108 m/s=0.01T=10mT.
Where is the site of dielectric breakdown?When the electrical voltage across a material is greater than the substance's dielectric strength, dielectric breakdown occurs, leading to partial ionization. When a gas breakdowns, the ionization dramatically diminishes the gas' electrical insulating qualities, producing a spark or an arc.
How does a liquid dielectric breakdown happen?High electric strengths (on the order of 1 MV/cm) and phenomena resembling those for gases control breakdown in highly purified liquid dielectrics. Liquids, which can contain particles, other liquids in suspension, and dissolved gases, are sadly readily polluted.
Learn more about electric field here:
https://brainly.com/question/8971780
#SPJ4
find the ratio of turns on the primary coil to turns on the secondary coil in a transformer that will stop the 110v household voltage down to 4.1 v .
Ratio of turns on the primary coil is 26
Briefing
So to solve for this problem this is computed by the following steps
Vp/Vs (=Np/Ns)
Briefing
Where;
Vp = Voltage primary
Vs = Voltage Secondary
Np =Turn ratio primary
Ns = Turn ratio Secondary
So plugging in our Valves
110/4.1 =Np/Ns
Np/Ns= 26.82
So the answer is 26 Coils
Learn more about Voltage
Visit:
https://brainly.com/question/2364325
#SPJ4
What three conservative double latter
One possible response is WOOLLEN, which is pronounced "double U, double O, double L." The only terms with consecutive triple doubles that are commonly used are BOOKKEEPER (or BOOKKEEPING), which offers a more gratifying solution.
which three double-letter states are there?
If you're looking for a single word with three consecutive letters, "ghi" is the one you desire!
What word has three double letters in it?
An ancient joke asks, "Can you think of a term with three consecutive double letters?" One possible response is WOOLLEN, which is pronounced "double U, double O, double L." The only terms with consecutive triple doubles that are commonly used are BOOKKEEPER (or BOOKKEEPING), which offers a more gratifying solution.
To know more about (Consecutive word)
Visit:
https://brainly.com/question/18500956
#SPJ1
A 213 kg crate slides 7.6 m until coming to a stop after being pushed by a large man.
The effective coefficient of kinetic friction between the crate and the surface is 0.37.
Calculate the work done by friction.
A)1,133.16 J
B)772.34 J
C)2,087.4 J
D)5,869.78 J
Answer:D
Explanation:
The compound formed has a(n) ___________ bond and is a(n) _________________. Responses
Answer:
The compound formed has ionic bonds and is a crystalline solid
Explanation:
A metal plus a nonmetal chemical combine to form an ionic compound, with ionic bonds
what is the molecular mass of an ideal gas of rms speed 542 m/s and average translational kinetic energy 6.93e-21 j
The Molecular Mass of ideal gas as per kinetic theory is 12.541 g.
The square root of the average square velocity is known as the root mean square or RMS velocity. Its units of velocity reflect this. Since all of the particles in a typical gas sample are moving in all directions, the net velocity for that sample is zero, which is why we use the rms velocity instead of the average. The square root of the average square are of the velocity is the root mean square velocity. Since the particles in a typical gas sample are moving in all directions, the net velocity is zero, which is why we use the rms velocity rather than the average velocity.V=√[3RT/M]
squaring both sides of equation
V²=3RT/M
M=3RT/V²M= 3 x 8.3 x 273/542
=12.541 g
To learn about Molecular Mass -
https://brainly.com/question/14122402
#SPJ4
Find the value of the decay constant of a radioactive substance having a half-life of
0.02 seconds.
34.65 is the value of the decay constant of a radioactive substance having a half-life of 0.02sec.
Half-Life: It is the amount of time it takes for half of a Radioactive particular sample to react particular quantity requires to reduce its initial value to half. That means the time taken by the radioactive substance or isotopes to decay half.
Half-Life Formula :t₁/₂ = 0.693/λ
Where as t1/2 is Half-Life of a radioactive substance
λ= decay constant
We have t1/2 = 0.02sec substitute in the formula
0.02=0.693/λ ⇒λ= [tex]\frac{0.693}{0.02}[/tex]
λ= 34.65
The decay constant of a radioactive substance having a half life-life of 0.02 is 34.65.
To learn more about Radioactive:https://brainly.com/question/2320811
What is the acceleration of a 50 kg object pushed with a force of 200N?
Answer:
40 m/s
Explanation:
F = ma (force = mass * acceleration)
a = F/m
a = 200 N / 50 kg
a = 40 m/s
Which surfaces tend to have the largest and smallest coefficients of friction? Explain why.
Ice on steel has low coefficient of friction whereas rubber on pavement has high coefficient of friction. Object such as silicone rubber can have a coefficient of friction much greater than one.
Which surfaces have the largest and smallest coefficients of friction?Polytetrafluoroethylene has the lowest friction coefficient of any solid-state material but the coefficient of friction depends on the materials used.
Ice on steel has a low coefficient of friction as the two materials slide past each other very easily whereas rubber on pavement has a high coefficient of friction that is the materials do not slide past each other easily. We can say that rougher surfaces have a higher coefficient of friction.
Coefficient of friction more than one means that the frictional force is stronger than the normal force. An object such as silicone rubber, for example, can have a coefficient of friction much greater than one.
to know more about coefficient of friction, refer
https://brainly.com/question/14121363
#SPJ1
what is expected to happen to the total peripheral resistance (tpr) when the hand is placed in the ice cold water?
Blood pressure decreases is expected to happen to the total peripheral resistance (tpr) when the hand is placed in the ice cold water.
Why is total peripheral resistance important?Hypertension is characterized by an increase in peripheral resistance overall brought on by both functional and structural changes in the arterioles, and endothelial malfunction is a significant factor in the rise in arteriolar tone. TPR is influenced by a number of variables, including blood viscosity and volume as well as hormone and neurotransmitter levels in the blood.
What occurs when total peripheral resistance is raised?Hypertension is characterized by an increase is total peripheral resistance brought on by both changes in structure and function in the arterioles, and angiogenesis is a significant factor in the rise in arteriolar tone.
To know more about Total peripheral resistance visit:
https://brainly.com/question/15001073
#SPJ4
a sodium photoelectric surface with work function 2.3 ev is illuminated by electromagnetic radiation and emits electrons. the electrons travel toward a negatively charged cathode and complete the circuit shown below. the potential difference supplied by the power supply is increased, and when it reaches 4.5 v, no electrons reach the cathode. (a) for electrons emitted from the sodium surface, calculate the maximum kinetic energy, end the maximum speed. (b) calculate the wavelength of the radiation that is incident on the sodium surface. (c) calculate the minimum frequency of light that will cause photoemission from this sodium surface.
(a) The highest possible rate of kinetic energy is -2.2 eV and the highest possible rate of speed is 2.3 × 10⁶ m/s.
(b) The length of the radiation's wave is 86 nm.
(c) The lowest frequency of visible light is 3.5 x 10¹⁴ Hz.
SOLUTION
To solve this problem, we can use the following equations:
- The maximum kinetic energy of the electrons emitted from the sodium surface is given by:
KEmax = Work function - Potential difference
- The maximum speed of the electrons is given by:
vmax = sqrt (2 × KEmax ÷ m)
where m is the mass of the electron.
- The incident radiation wavelength can be calculated using the Planck-Einstein equation:
E = h × f
where E is the energy of the incident radiation, h is the Planck constant, and f is the frequency of the radiation.
- The minimum frequency required for photoemission can be calculated using the work function of the sodium surface:
fmin = Work function ÷ h
- Using these equations, we can calculate the following:
(a) The maximum kinetic energy of the electrons is given by:
KEmax = 2.3 eV - 4.5 V = -2.2 eV
Hence, the maximum kinetic energy is -2.2 eV.
- The maximum speed of the electrons is given by:
vmax = sqrt(2 × (-2.2 eV) ÷ (9.1 × 10⁻³¹ kg)) = 2.3 × 10⁶ m/s
Hence the maximum speed is 2.3 × 10⁶ m/s.
(b) The incident radiation wavelength can be calculated using the Planck-Einstein equation:
E = h × f
f = E ÷ h
f = 2.3 eV / (6.6 × 10⁻³⁴ J × s) = 3.5 × 10¹⁴ Hz
lambda = c ÷ f
lambda = (3.0 x 10⁸ m/s) ÷ (3.5 x 10¹⁴ Hz) = 8.6 x 10⁻⁷ m = 86 nm.
Hence, the wavelength of the radiation is 86 nm.
(c) The minimum frequency required for photoemission can be calculated using the work function of the sodium surface:
fmin = 2.3 eV ÷ (6.6 × 10⁻³⁴ J × s) = 3.5 × 10¹⁴ Hz
Hence, the minimum frequency of light is 3.5 × 10¹⁴ Hz.
Learn more about kinetic energy here:
brainly.com/question/26472013
#SPJ4
Suppose you are camping on a mountain and the air temperature is very cold. How would you keep warm? Would you build a fire or set up a tent?
with explenation..
Answer:
build a tentExplanation:
it provides warmth and protection
A 70.0 kg astronaut is training for accelerations that he will experience upon reentry. He is placed in a centrifuge (r = 10.0 m) and spun at a constant angular velocity of 16.3 rpm. Answer the following:
What is the angular velocity of the centrifuge in rad/s ?
What is the linear velocity of the astronaut at the outer edge of the centrifuge?
What is the centripetal acceleration of the astronaut at the end of the centrifuge?
How many g’s does the astronaut experience?
What is the centripetal force and net torque experienced by the astronaut? Give magnitudes and directions.
The astronaut faces 1.71 rad/s angular velocity, 17.1 m/s linear velocity, 29.2 centripetal acceleration, 3 g's are experienced, and 2044 N of centripetal force. The torque experienced is zero
What is rotational motion?
An object is said to be in rotational motion when it is travelling in a circular route around a fixed axis. Centrifugal force is a radially outward force that the item experiences as a result of this motion.
The image given below explains the conversion. The torque is zero since there is no tangential force.
To learn more about centrifugal force click here
https://brainly.com/question/13259103
#SPJ1
A ball weighing 10kg traveling a 1.4m/s hits and rebounds back off a wall and now travels 1.4m/s in the opposite direction. What is the work done on it?
Answer:
the work done on it is if it bounces of the wall then it can bounce back to you
Explanation:
if a system does 57.0 kj of work on its surroundings and releases 105 kj of heat, what is the change in the internal energy of the system, in kj?
The changes in the internal energy of the system -164 KJ.
Solution:
change in internal energy = q + w
= -105 KJ(+ 57 kg)
= -164 KJ.
The change in internal energy of the system is the sum of heat transferred and work done. The heat flux is equal to the change in internal energy of the system plus the PV work done. The change in internal energy of the system is the sum of heat transferred and work done.
The heat flux equals the change in internal energy of the system plus the PV work. An isolated system cannot exchange heat or interact with its surroundings, so its internal energy change is equal to zero. But in a cyclical process, the total change in the internal energy of the system is zero.
Learn more about The internal energy here:- https://brainly.com/question/25737117
#SPJ4
a student pushes a 51.5 kilogram bookshelf across a smooth floor with a net force of 67 n. what is the approximate acceleration of the bookshelf?
Acceleration of the bookshelf is 1.30 m/[tex]s^{2}[/tex] when mass is 51.5 kg and force is 67 N.
To find the acceleration, we use newton's second law of motion. According to newton's second law of motion,
" The acceleration of an object is directly proportional to the net force acting on the object while being inversely proportional to its mass." Newton's second law of motion gives the measurement of force.
Acceleration is the result of force on an object.
The formula for finding acceleration from this law is.
Acceleration = Force/ Mass
a = F/m
So, a = 67/51.5 m/[tex]s^{2}[/tex]
= 1.30 m/[tex]s^{2}[/tex]
Acceleration in this case is 1.30 m/[tex]s^{2}[/tex]
To know more about acceleration here
brainly.com/question/12550364
#SPJ4
the amount of air drag on an 0.8n flying squirrel dropping vertically at terminal velocity is
The velocity of a vehicle is typically expressed relative to ground.
What is velocity?Velocity is the speed of something that is given direction.
velocity is the measurement to a body's "pace of change of the displacement in relation to time" whenever the main body is traveling through along a straight route.
It is common knowledge of that the word "linear" refers to be something that is totally straight; therefore, when the body moves in a straight path, it is said to be linear velocity .
Alternatively, velocity is the distance traveled by a body traveling in a specified to the direction during of a predetermined period of time. Thus, the fundamental idea of linear velocity is the provided by the union of these two quantities.
Because it always has the direction of velocity is a vector.
To know more about velocity click-
https://brainly.com/question/25749514
#SPJ1
a neon yellow 75g ball is launched at an angle of 50 with the level ground. it has an initial velocity of 15 m/s. assume that there is no air resistance and that the ball lands at the same elevation that it was launched . what is the maximum height that the ball reaches ? what is the reange of the ball ?
The maximum height that the ball reaches is 8.79 m and the range of the ball is 12.29 m
To find the maximum height that the ball reaches, you will need to use the equation for the vertical displacement (y) of the ball:
y = Vy * t - (1/2) * g * t^2
Where Vy is the vertical component of the initial velocity, t is the time elapsed, and g is the acceleration due to gravity.
To find the time at which the ball reaches its maximum height, set the vertical displacement (y) to zero and solve for t:
0 = Vy * t - (1/2) * g * t^2
This equation can be rearranged to:
t = √(2Vy/g)
Then, substitute the given values for the initial velocity (Vy) and the acceleration due to gravity (g), and solve for t:
t = √(2 * 15 m/s * sin(50) / 9.8 m/s^2)
t = 1.16 s
y = Vy * t - (1/2) * g * t^2
y = 15 m/s * sin(50) * 1.16 s - (1/2) * 9.8 m/s^2 * (1.16 s)^2
y = 8.79 m
To find the range of the ball, you will need to use the equation for the horizontal displacement (x) of the ball:
x = Vx * t
Where Vx is the horizontal component of the initial velocity and t is the time elapsed.
To find the time elapsed (t), use the equation for the time at which the ball reaches its maximum height:
t = √(2Vy/g)
Substitute the given values for the initial velocity (Vy) and the acceleration due to gravity (g), and solve for t:
t = √(2 * 15 m/s * sin(50) / 9.8 m/s^2)
t = 1.16 s
To find the horizontal component of the initial velocity (Vx), use the equation:
Vx = V0 * cos(θ)
Where V0 is the initial velocity of the ball and theta is the angle of launch. Substitute the given values for the initial velocity (V0) and the angle of launch (theta), and solve for Vx:
Vx = 15 m/s * cos(50)
Vx = 10.6 m/s
To find the range of the ball, substitute the values for the horizontal component of the initial velocity (Vx) and the time elapsed (t) into the equation for the horizontal displacement (x):
x = Vx * t
x = 10.6 m/s * 1.16 s
x = 12.29 m
To know more about range visit : https://brainly.com/question/16543060
#SPJ4
Describe a situation where you have applied a lot of force (and maybe even felt tired afterward) but did no work in the sense we study it in Science class.
An example of no work after the effort is work done by the collie to travel a distance in a straight line by lifting a mass.
What is Work?In physics, the word "work" involves the measurement of energy transfer that takes place when an item is moved over a range by an externally applied, at least a portion of which is applied within the direction of the displacement.
The length of the path is multiplied by the element of a force acting all along the path to calculate work if the force is constant. The work W is theoretically equivalent towards the force f times the length d, or W = fd, to portray this concept.
The amount of work done by the coolie to travel a certain distance in a straight line by lifting a certain amount of mass. Here the work done is zero because when the coolie lifted the mass the force exerted in the upward direction makes an angle of 90° and as per the formula of work done it will be equal to zero.
To know more about Work:
https://brainly.com/question/13662169
#SPJ1
which two measurements are needed in order to calculate the speed of an object in motion?
The two measurements, which are needed in order to calculate the speed of an object in motion, be: amount of distance travelled at a particular time interval and the time interval.
what is speed?The pace at which an object's position changes in any direction is what is meant by speed.
Speed is measured as the ratio of the distance traveled to the time it took to cover that distance. Speed is a scalar quantity since it just has a direction and no magnitude. Be meter/second is the SI unit of speed.
The equation, s = d/t, offers the speed formula.
Where,
s is the speed in m.s⁻¹
d is a representation of the distance in m.
The duration in s is t.
your question is incomplete, but most probably your full question was
Which two measurements are needed in order to calculate the speed of an object in motion?
Distance and time
Time and mass
Force and distance
Volume and time
Learn more about speed here:
brainly.com/question/28224010
#SPJ4
how does the size of the habitable zone around a star of spectral class g compare to the size of the habitable zone around a spectral class m star?
The size of the habitable zone around a star of spectral class g is larger to the size of the habitable zone around a spectral class m star.
What is a habitable zone?The range of orbits around a star within which a planetary surface may sustain liquid water given sufficient atmospheric pressure is known as the habitable zone, sometimes known as the circumstellar habitable zone (CHZ) or simply the habitable zone.The CHZ's boundaries are determined by Earth's location within the Solar System and the quantity of solar radiation it receives.Given the significance of liquid water to Earth's biosphere, the nature of the CHZ and the things contained inside it may be crucial in defining the range and distribution of planets capable of supporting Earth-like extra terrestrial life and intelligence.Due to the possibility that there are more planetary-mass moons in the CHZ than planets, the region is also of great interest to the newly growing topic of the habitability of natural satellites.To learn more about habitable zone, refer:
https://brainly.com/question/29908245
#SPJ4
a crate of grapes lifted 10 meters gains 200 j of potential energy. if the same crate is instead lifted 20 meters, its gain in potential energy is
A same crate gains twice as much potential energy when it is raised 20 meters alternatively.
What is potential energy, exactly?Potential energy is a form of energy that is dependent on the relationship between different system components. When a springy is stretched or stretched, its potential energy increases. If a steel ball is pushed above the ground as opposed to descending to the ground, it has more energy stored.
What kind of potential energy is that?An object has the capacity to store energy because of its position. As an example, a destruction machine's large ball is conserving energy by being held in a high position. This positional force that has been saved is known as electric potential.
To know more about potential energy visit:
https://brainly.com/question/24284560
#SPJ4
the electron-group arrangement around a central atom is defined by the number of –electron groups. the molecular shape is defined by the relative positions of the around the central atom. two species may have the same electron-group arrangement but have different molecular shapes. t or f
The total number of Valence electron groups determines the configuration of electron groups around a core atom. The relative placements of the atoms around the core atom determine the shape of the molecular structure.
There are three bonding electron groups and one nonbonding electron group in a molecule with four total electron groups surrounding the center atom. Its molecules have a trigonal pyramidal configuration.Molecules are made up of one or more atoms connected by covalent (chemical) connections. Atoms can be visualized as circles with a nucleus at the centre (made up of protons and neutrons) and one or more concentric circles surrounding them. These circles represent the "shells" or "levels" in which the electrons surrounding the nucleus of the atom are located, along with markings indicating the electron at each level.A molecule is the smallest unit into which a substance may be subdivided and still remain the same thing. It has two or more atoms in it.
To know more about Valence electron
https://brainly.com/question/29104023
#SPJ4
You are waiting in line to use the diving board at your local pool. While watching people dive
into the pool from the board, you realize that using a diving board to spring into the air before a
dive is a good example of Newton’s third law of motion. Explain how a diving board illustrates
Newton’s third law of motion.
Answer:
because the diving board is helping the diver jump and helping increase the force of the diver's jump, they work together to help the jumper have a jump.
Electricity flows in a circle. It flows from the outlet to the electric device and back to the outlet. If something gets in the way of this flow, what is it called?.
The things that get in the way of electrical flow is called insulator.
An insulator is a material (body or substance) that resists electrical flow through it. Therefore, it can be said that the insulator gets in the way of electricity flow. Electrical insulators usually have electrons that are tightly bounded to each other, making them not able to move freely.
Electrical insulators are usually used to support and separate electrical conductors in various electrical equipment. The purpose is to hold the conductors in position without allowing electrical current through itself.
Some examples of electrical insulators are:
GlassPaperWoodPlasticLearn more about insulator at https://brainly.com/question/492289
#SPJ4
Answer: Insulator
Explanation:
If something gets in the way or breaks the flow of electricity, it is called an insulator.
if a motorcycle with a mass of 250 kg has a kinetic energy of 200,000 j, what is the motorcycle's speed in m/s?
The motorbike travels at a speed of 40 m/s
What is speed?the speed at which an object's location changes in any direction. The distance traveled divided by the time it took to travel that distance indicates how fast something is moving.
Describe kinetic energy.Kinetic energy, which may be seen in the movement of an item or subatomic particle, is the energy of motion. Kinetic energy is present in every particle and moving object.
KE = ½ m[tex]V^{2}[/tex]
We have kinetic energy of 200,000 j, mass of 250 kg , so to fine [tex]v^{2}[/tex]
using KE = ½ m[tex]V^{2}[/tex]
kinetic energy will be multiply by 2 and divided by mass
[tex]v^{2}[/tex]= KE / 1/2 * m
[tex]v^{2}[/tex] = 200000 * 2 / 250
[tex]v^{2}[/tex] = 1600
v = [tex]\sqrt{1600}[/tex]
v = 40 m/s
The motorbike travels at a speed of 40 m/s
To know more about speed click:
brainly.com/question/28224010
#SPJ4
A car, ma 1225 kg, traveling at 105 km/h, low to a top in 53 m. What i the ize of the force that acted on the car
Answer:9700 N
Explanation: i js know
Should the graphs of Weight vs. Forces of Friction of the shoes be linear? Explain.
Weight being X and Forces of Friction being Y
Graph of weight vs. forces of friction of the shoes would be linear. Greater is the weight (X) of shoes, greater is friction (Y) between the object and the surface on which the object is kept.
What is the graph pf weight vs force of friction?Given let weight being X and forces of friction being Y.
As we know that the gravitational force is equal to mass multiplied by acceleration due to gravity. When mass increases, weight of the shoes (X) increases, therefore normal force increases and so friction (Y) also increases.
Friction is directly dependent on the weight acting between two surfaces. When the mass is more, weight will be more and hence friction will also be more.
To know more about force of friction, refer
https://brainly.com/question/24386803
#SPJ1
when the boy realizes he is late for dinner. he doubles his acceleration. whats the forcethat the boy is pulling the wagon now.
When the boy realizes he is late for dinner, he doubles his acceleration. The force that the boy is pulling the wagon now will also be doubled.
What is Newton's first law?
Unless influenced by an imbalanced force, an item at rest stays at rest, and an object in motion keeps moving in a straight path at a constant pace.
An item that is stationary is one that is not shifting or considered the beginning. In such posture, all the forces exerting pressure on it are balanced out or their combined magnitudes are zero.
Based to their inertia, stationary objects which have already balanced forces acting on them prefer to stay that way. When an unbalanced force is operating on a stationary item will it move.
As we continuously increases the force some particular object the acceleration also increases proportionally. so, the mass does not change as the acceleration increases, we can say that force that the boy is pulling the wagon is equal to acceleration. Therefore, if the boy double the force double the acceleration.
Learn more about Newton's first law,
https://brainly.com/question/26108169
#SPJ1
if the ring is off-center when it drops on the disk, how will that affect the results? think about the effect on the moment of inertia.
The disk will continue to spin if the ring strikes it off-center, but the moment of inertia will be affected.
The disk will be out of balance due to the ring's off-center placement, which will result in a lower moment of inertia than it would have if the ring were centered. The disk will therefore not spin as quickly or for as long as it would if the ring were in the middle.
This implies that the ring's rotational energy will not be dispersed uniformly, leading to an uneven, or skewed, rotation. The off-center ring's inability to accurately reflect the moment of inertia will result in an erroneous measurement of it.
What is moment of inertia?
The term "moment of inertia" refers to a physical quantity that quantifies a body's resistance to having its speed of rotation along an axis changed by the application of a torque (turning force).
To know more about moment of inertia, check out https://brainly.com/question/3406242
#SPJ4