Whoever answers get 10 points

Whoever Answers Get 10 Points

Answers

Answer 1

If a full moon is visible on November 2, then waning crescent would be the next phase on November 13. If 21 October has waning crescent moon then 29 would have waxing crescent moon.

How long are moon phases?

Moon phases vary in length, depending on the position of the Moon relative to Earth. During a single orbit of the Moon, it passes through eight distinct phases, each lasting an average of three and a half days. The phases in order are the New Moon, Waxing Crescent, First Quarter, Waxing Gibbous, Full Moon, Waning Gibbous, Last Quarter and Waning Crescent. During a lunar cycle, the Moon passes through each of these phases in the same order, taking an average of 29 days, 12 hours, and 44 minutes to complete the cycle.

After 11 days a full moon transitions to a waxing crescent moon. After 8 days a waxing crescent moon goes from waning to waxing crescent moon.

To learn more about moon phase from the given link
https://brainly.com/question/2285324
#SPJ1


Related Questions

what tangential velocity must block a have so that block b remains at the same height under the table?

Answers

The tangential velocity must block a have so that block b remains at the same height under the table is rw.

Any object moving in a circular motion has a linear speed known as tangential velocity. One full rotation of a turntable will move a point farther from the outside edge than it will from the center. At any point in time, the velocity of a body traveling along a circular path at a distance r from the center is directed tangentially. Tangential velocity is the term used to describe this. In other words, the tangential velocity is always equal to the linear velocity.

[tex]Vtan=Rw\\\\R=path\\\\w=angular- velocity\\\\Vtan=Tangential-Velocity[/tex]

To learn more about tangential velocity -

https://brainly.com/question/28738284

#SPJ4

What is the efficiency of a 10 hp DC motor that draws 31 amps at 300 volts?

Answers

The efficiency of a 10 hp DC motor that draws 31 A at 300 volts is equal to 80 %.

How to calculate the efficiency of a motor?

The efficiency of a motor can be calculated from the ratio of the mechanical power output to the electric power input to the motor.

Given the horsepower of the DC motor = 10 hp

Conver the hp into watt:

1hp = 745.7 W

Output power = 10 hp = 10× 745.7 = 7457 W

Input power = 31 × 300 = 9300 W

The efficiency of the motor = Output/Input ×100

Efficiency = (7457/9300) ×100 = 80 %

Learn more about the efficiency of the motor, here:

https://brainly.com/question/4596640

#SPJ1

Question 16 During a rocket launch, the action force is considered the force of explosion from the burning fuel and expanding gases. Which of the following would be considered the reaction force? ​

Answers

Answer:

Explanation:

The reaction force to the action force during a rocket launch would be the force exerted by the ground or launch pad on the rocket. The action force is the force of explosion from the burning fuel and expanding gases, which propels the rocket upward. The reaction force is the force exerted by the ground or launch pad in response to this action force, which keeps the rocket grounded and prevents it from moving. The action and reaction forces are equal in magnitude but opposite in direction, and they act on different objects. The action force acts on the rocket, while the reaction force acts on the ground or launch pad.

a 2.50-m segment of wire supplying current to the motor of a submerged submarine carries 1000 a and feels a 4.00-n repulsive force from a parallel wire 5.00 cm away. what is the direction of the current in the other wire?

Answers

The 400 A current flowing through the wire will be going the other way from the other wire.

What sort of force is repulsive?

An electroscope is a straightforward instrument that consists of a metal piece protruding from a glass jar with thin metal leaves suspended inside. This design demonstrates the electrostatic repulsive force. The leaves spread apart by the Coulomb force when a charged body touches the external metal piece.

We will apply the equation to determine the current in the other wire

F/l = µ₀I₁I₂/2πr and solve it for I₂.

The other wire's current will flow in the opposite direction to the first one because the force is repulsive.

I₂ = F.2πr/µ₀I₁l

I₂ = 4×2π×0.05m/4π×10⁻⁷T.m/A×1000A×2.50m

I₂ = 400 A.

The 400 A current flowing through the wire will be going the other way from the other wire.

To know more about repulsive force visit:

https://brainly.com/question/1514813

#SPJ4

The kinetic energy of a 3 kg object moving at a speed of 4 m/s is: please I need it fast

Answers

Answer:

[tex]\huge\boxed{\sf K.E. = 16 \ J}[/tex]

Explanation:

Given data:

Mass = m = 3 kg

Speed = v = 4 m/s

Required:

Kinetic Energy = K.E = ?

Formula:

[tex]\displaystyle K.E. =\frac{1}{2} mv^2[/tex]

Solution:

[tex]\displaystyle K.E. =\frac{1}{2} (3)(4)^2\\\\K.E. =\frac{1}{2} (3)(16)\\\\K.E. = (2)(8)\\\\K.E. = 16 \ J\\\\\rule[225]{225}{2}[/tex]

A solid sphere of radius R is placed at a height of 40 cm on a 15∘ slope. It is released and rolls, without slipping, to the bottom.From what height should a circular hoop of radius R be released on the same slope in order to equal the sphere's speed at the bottom?

Answers

A solid sphere of radius R is placed at a height of 40 cm on a 15∘ slope. It is released and rolls, without slipping, to the bottom. A circular hoop of radius R be released on the same slope in order to equal the sphere's speed at the bottom with height of 57.14 cm

The height that a circular hoop should be released can be calculate as follows:

Generally the equation for the potential energy of the sphere is mathematically given as

mgh= 1/2Iw² =1/2 mv²

where,

inertia of sphere

I = 2/5 mr²

and

angular velocity

w = v/r

therefore, we can input inertia of sphere and angular velocity to potential energy equation

mgh= 1/2Iw² =1/2 mv²

mgh = 1/2 ( 2/5mr²) ((v/r)² + 1/2mv²

mgh = 1/2 ( 2/5(v/r)²mr²) + 1/2mv²

mgh = 1/5 mv² +  1/2 mv²

mgh = 7/10 mv²

v² = 10gh

        7

generally the equation for the inertia of circle of sphere is mathematically given as

I = mr²

mgh = mv²

h = v²/g

therefore h = 10gh/7

                        g

h = 57.14 cm

learn more about height at https://brainly.com/question/15798657

#SPJ4

A block is pushed across a 10 m rough surface quickly by a boy. Which of the following would not increase the power needed by the boy to move the block?

Question 5 options:

A .Increase the mass of the block


B. Decrease the time of the block slid


C. Increase the roughness of the surface


D. Increase the time of the block was slid

Answers

The option that would not increase the power needed by the boy to move the block is "Increase the time of the block was slid".

Option D is the correct answer.

What is the power applied by the boy?

The power applied by the boy to push the block across the 10 m rough surface is the measure of the energy expended over a given time interval.

Mathematically, the power applied by the boy is given as;

P = E/t

where;

E is the energy expended by the boyt is the time over which the boy applies the force

P = (F x d)/t

where;

F is the applied forced is the displacement of the block

According to Newton's second law of motion, the applied force is given as;

F = ma

P = (ma x d) / t

where;

m is the mass of the blocka is the acceleration of the blockd is the displacement of the blockt is time of motion

From the formula above, the following will increase the power needed by the boy to move the block.

increase in the mass of the blockincrease in the displacement of the blockdecrease the time of block slid

Learn more about power here: https://brainly.com/question/20137708

#SPJ1

In an aneurysm, the cross-sectional area of a vessel expands. With the approximation that blood is non-viscous and incompressible, and that you have a laminar flow, which one of the following is true in the expanded segment, compared to the normal vessel?
a) The velocity is higher.
b) The flow is higher.
c) The density of the blood increases.
d) The velocity is the same.
e) The density of the blood decreases.
f) None of the above.

Answers

No, if The cross-sectional diameter of a vessel increases in an aneurysm. Considering that blood is roughly non-viscous and incompressible and that there is a laminar flow,

Why do liquids not have viscosity?

A non-viscous fluid is one that offers zero resistance to internal friction or has no resistance at all. A fluid is described as being viscous if there is greater flow resistance.

Which substances are viscous?

Because of their high viscosity, some liquid, like pitch, glass, and peanut butter, act like solids. A liquid is referred to as "viscous" in common parlance if it has a viscosity that is clearly higher than water, and "mobile" if it has a viscosity that is noticeably lower.

To know more about  non-viscous visit:

https://brainly.com/question/17087482

#SPJ4

I energy ever created or detroyed? Why or why not? How doe thi relate to a roller coater

Answers

The energy can neither be created nor destroyed. It can be transformed from one form to another.

The law of conservation of energy states that, the total energy of an isolated system remains constant and it is said to be conserved over time. This means that the system always has the same amount of energy unless added from outside.

In the above question, it is asked if law of conservation of energy can be applied on a roller coaster. The answer is yes. On a roller coaster, energy changes from potential to kinetic and back again repeatedly over and over the course of the ride.

The two forms of energy which are important on a roller coaster are gravitational potential energy and kinetic energy. The roller coaster has the greatest amount of potential energy at the top of the first hill as it is the highest point of the roller coaster.

To know more about roller coaster:

https://brainly.com/question/26381323

#SPJ4

A green katydid looks very much like a green leaf.


If the katydid above has ten offspring, why might it be advantageous for some to be green, some yellow, and others brown?

Answers

Answer:

because they can all blend in with different surroundings

The wheel of moving car is driven by the engine. The car is accelerating in the direction
shown. In which direction does the frictional force act on the wheel?

Answers

Answer:

B

Explanation:

always opposing the forward force which is the direction of the acceleration of the car.

A woman does 236 J of work

dragging her trash can 24. 4 m to

the curb, using a force of 18. 9 N.

At what angle was her force

directed?

(Unit = degrees)

Answers

According to the given statement is the 59.21° angle was her force directed.

What is a force?

The word "force" has a specific meaning in science. At this level, calling a force a shove or a pull is entirely appropriate. A charge is not really something an object "has in it" or that it "contains." One thing experiences a force from another. Living organisms or inanimate objects are not the only things that can be considered forces. Every time two items interact, a force is exerted on every one of the objects. The force is no longer felt by the two objects when the interaction ends.

Briefing:

Work done = force × distance

236J = 18.9cos(o) × 24.4

236/24.4 = 18.9cos(o)

(0.5117)cos^-1 = (o)

59.21°

To know more about Force visit:

https://brainly.com/question/13191643

#SPJ4

A grocery shopper tosses a(n) 8.7 kg bag of
rice into a stationary 18.1 kg grocery cart.
The bag hits the cart with a horizontal speed
of 5.3 m/s toward the front of the cart.
What is the final speed of the cart and bag?
Answer in units of m/s.

Answers

Answer:

I don't know

Explanation:

I don't know

10. An airplane is flying east at 150m/s. If the forces on the airplane add to 0, describe what will
happen to its motion.

Answers

Answer:k

Explanation:k

k

if the planets pull on the sun as much as the sun pulls on the planets, why are we able to approximate the sun as a fixed position when studying the planetary orbits?

Answers

If the worlds pull it on sun more than the sun does on the planets, then the above statement is true because of sun's acceleration is significantly smaller.

What is the name of the sun?

Even though it is a star, and our own local star at that, our sun lacks a widely used and distinctive English proper name. We English people just refer to it as the sun. English speakers occasionally refer to our sun as Sol.

What really is sun in living?

It emits heat and light, also known as solar energy, which enables life to live on Earth. To flourish, plants require sunshine. Humans and other animals alike depend on plants for nourishment as well as the oxygen they release. Earth would freeze absent solar heat.

To know more about Sun visit:

https://brainly.com/question/12528243

#SPJ4

which statement is true about an object that is traveling in uniform circular motion? group of answer choices the net force on the object is directed away from the center of the circular path.

Answers

The statement that is true about circular motion is that; the net force on the object is directed toward the center of the circular path. Option D

What is the circular motion?

We know that the circular motion is the kind of motion that occurs along a circular path. We know that in a circular motion, the direction of the motion is also important.

Now we know that the whirling of a stone around a circular path is one of the very typical examples of a circular motion in the context of our discussion here.

Learn more about circular motion:https://brainly.com/question/2285236

#SPJ1

Which statement is true about an object that is traveling in uniform circular motion? O A. The speed of the object varies. O B. The direction of the object's velocity is constant. OC. The net force on the object is directed away from the center of the circular path. O D. The net force on the object is directed toward the center of the circular path.

What is the mass of an 8oz styrofoam cup?

Answers

The mass of an 8oz styrofoam cup is approximately 227 grams .

What is the mass of a substance?

The mass of a substance is a measure of the quantity of matter present in that substance,

The mass of a substance is measured with a chemical balance and is independent of gravity. The SI  unit of the mass of a substance is the kilogram. kg.

Other smaller multiples of the kg include grams, milligrams, centigrams, etc.

Some other unit of measurement of the mass of a substance is ounces (oz), pounds (lb), tonnes (t), etc.

The conversion from ounces to gram is 1 oz = 28.3495 grams

Hence, 8 oz = 8 * 28.3495 grams

8 oz = 226.796 grams or approximately 227 grams

Learn more about mass in ounces at: https://brainly.com/question/13381077

#SPJ1

If the swimmer starts at rest, slides without friction, and descends through a vertical height of 2.41 m

, what is her speed at the bottom of the slide?

Answers

Answer:

6.88 m/s

Explanation:

The Conservation of Energy states that:

Initial Kinetic Energy + Initial Potential Energy = Final Kinetic Energy + Final Potential Energy

So we can write

[tex]mgh_{i}+\frac{1}{2}mv_{i} ^{2}=mgh_{f}+\frac{1}{2}mv_{f} ^{2}[/tex]

We can cancel the common factor of [tex]m[/tex] which leaves us with

[tex]gh_{i}+\frac{1}{2}v_{i} ^{2}=gh_{f}+\frac{1}{2}v_{f} ^{2}[/tex]

Lets solve for [tex]v_f[/tex]

[tex]gh_{i}+\frac{v_{i} ^{2}}{2}=gh_{f}+\frac{v_{f} ^{2}}{2}[/tex]

Subtract [tex]gh_f[/tex] from both sides of the equation.

[tex]gh_{i}+\frac{v_{i} ^{2}}{2}-gh_{f}=\frac{v_{f} ^{2}}{2}[/tex]

Multiply both sides of the equation by 2.

[tex]2(gh_{i}+\frac{v_{i} ^{2}}{2}-gh_{f})={v_{f} ^{2}[/tex]

Simplify the left side.

Apply the distributive property.

[tex]2(gh_{i})+2\frac{v_{i} ^{2}}{2}+2(-gh_{f})={v_{f} ^{2}[/tex]

Cancel the common factor of 2.

[tex]2gh_{i}+v_{i} ^{2}-2gh_{f}={v_{f} ^{2}[/tex]

Take the square root of both sides of the equation to eliminate the exponent on the right side.

[tex]{v_{f}=\sqrt{2gh_{i}+v_{i} ^{2}-2gh_{f}}[/tex]

We are given [tex]g,v_{i},h_{i},h_{f}[/tex].

We can now solve for the final velocity.

[tex]{v_{f}=\sqrt{(2*9.81*2.41)+(0^{2})-(2*9.81*0)[/tex]

Anything multiplied by 0 is 0.

[tex]{v_{f}=\sqrt{2*9.81*2.41[/tex]

[tex]{v_{f}=\sqrt{47.2842[/tex]

[tex]v_f=6.88[/tex]

What is the velocity of a football thrown?, when the mass of the football is 0.425 kg, and the momentum is + 10.1 kg.m/s?

Answers

The velocity of the football thrown is approximately 23.76 meters per second.

What is the velocity of the thrown football?

Momentum is simply the product of the mass of an object and its velocity.

This is expressed as;

P = m × v

Where m is the mass of the object and v is its velocity.

Given that;

Momentum P = 10.1kgm/sMass m = 0.425kgVelocity v = ?

Plug the given values into the above formula and solve for v.

P = m × v

v = P / m

v = 10.1kgm/s / 0.425kg

v = 23.76 m/s

Therefore, the velocity of the ball is 23.76 m/s.

Learn more about momentum: brainly.com/question/14952164

#SPJ1

Which object had more kinetic enerjy while it was being lifted?

Answers

The object that had a mass of 4 kilograms and was lifted at a rate of 3 m/s has a greater kinetic energy.

What is the kinetic energy?

We know that the kinetic energy has to do with the energy of an object that is in motion. Thus the kinetic energy is the energy that is said to be possessed by a moving object.

In the first case we have;

Kinetic energy = 1/2 mv^2 = (0.5 * 2 * 2^2)

= 4 J

In the second case;

Kinetic energy =  1/2 mv^2 = (0.5 * 4 * 3^2)

= 18 J

The second object had more kinetic energy.

Learn more about kinetic energy:https://brainly.com/question/26472013

#SPJ1

how long (in s) does it take a child on a swing to complete one swing if her center of gravity is 4.54 m below the pivot?

Answers

If a child on a swing has a center of gravity 4.54 m just below pivot, it takes her T =4.05s to complete one swing.

What makes gravity a force?

But in a larger sense, gravity is a force because it represents the interaction that happens when two masses are in close proximity to one another. Fundamentally, the warping of reality and the motion of entities through the stretched spacetime are what produce gravitational effects. However, the outcome appears to be the result of applying force.

How is gravity terminated?

Dr. Ryan Stone, played by Sandra Bullock, returns to Earth at the end of "Gravity" and crashes into a lake. After taking off her spacesuit, Dr. Ryan swims towards the surface but initially finds it difficult to stand up straight.

Briefing:

T=2π√(l/g)

T=2π√(4.54/9.81)

T=4.052s

T =4.05s

To know more about gravity visit:

https://brainly.com/question/14874038

#SPJ1

what is scientific law ​

Answers

Answer: A scientific law describes a natural occurrence, but doesn't attempt to clarify how the event occurs. Or there is an 'if, then' statement that can be made and tested.

Answer: Scientific law are principles that are accepted by an overwhelming majority of scientists. Scientific laws or laws of science are statements, based on repeated experiments or observations, that describe or predict a range of natural phenomena.

Explanation: Hope this was helpful

From what height above the surface of the earth should an object be dropped to initially experience an acceleration of 0.54g? (G=6.67x10^-11 N*m^2/kg^2, M-earth = 5.97x10^24kg, R-earth = 6.38x10^6m)

Answers

The height above the surface of the earth should be [tex]2.294 * 10^{6} m[/tex].

The Acceleration due to earth gravity is known as the acceleration due to gravity. It means when an object falls from a certain height towards the surface of the earth, its velocity changes. The change in velocity produces the acceleration in the object is called the gravitational acceleration

We know that acceleration due to gravity at height h is given by : [tex]g' = GM/(R+h)^{2}[/tex]

Where, G = gravitational constant = [tex]6.67 * 10^{-11}[/tex]

            M = mass of earth = [tex]5.97 * 10^{24} kg\\[/tex]

             R = radius of earth = [tex]6.38 * 10^{6} m[/tex]

             h = height

Given g' = 0.54

Putting these values in above equation  we get h = [tex]2.294 * 10^{6} m[/tex]

i.e. to experience an acceleration of 0.54g , the object should be at [tex]2.294 * 10^{6} m[/tex] above the earth's surface.

To know more about gravitation visit:

https://brainly.com/question/19714458

#SPJ1

A parallel plate capacitor with circular plates of radius R = 16.0 cm and plate separation d = 9.00 mm is being charged at the rate of 8.00 C/s.What is the displacement current through a circular loop of radius r = 21.00 cm centered on the axis of the capacitor? 8.00 You are correct.What is the displacement current through a circular loop of radius r = 3.00 cm centered on the axis of the capacitor?What is the magnitude of the magnetic field between the capacitor plates at a radius r = 3.00 cm from the axis of the capacitor?

Answers

The displacement current is 0.28125 C/s and the magnitude of the magnetic field is 2T.

Magnetic field strength is a quantitative measure of the strength or weakness of a magnetic field.

SI unit for the magnetic field is Tesla (T).

According to the displacement current and the Biot-Savart law, the displacement current and magnetic field can be calculated.

radius of the circular plate = R = 16.0

radius of circular loop = r = 21.0 cm

rate of charge =  (dq/dt) = 8 C/s

displacement current id = (dq/dt) * [tex]\pi r^{2}[/tex] / [tex]\pi R^{2}[/tex]

since r > R therefore in displacement current the formula can be changed as

id = (dq/dt) * [tex]\pi R^{2}[/tex] / [tex]\pi R^{2}[/tex]

id = (8) * [tex]\pi 16^{2}[/tex] / [tex]\pi 16^{2}[/tex]

id = 0.28125 C/s

magnetic field can be calculated by B = μ₀I/2πr

μ₀ = 4[tex]\pi[/tex] * [tex]10^{-7}[/tex] H/m

i = id = 0.28125 C/s

r = 3.0 cm

B = {4[tex]\pi[/tex] * [tex]10^{-7}[/tex] * 0.258125} / 2*[tex]\pi[/tex]*3*[tex]10^{-2}[/tex]

B = 1.87 T

B ≈ 2 T

The displacement current through a circular loop of radius r = 3.00 cm is 0.28125 C/s.

The magnitude of the magnetic field between the capacitor plates at a radius r = 3.00 cm from the axis of the capacitor is 2T.

To know more about magnetic field,

https://brainly.com/question/12478296

#SPJ4

a typical person has a surface area of about 2m^2 and a layer of fat about 1cm thick (it can vary from 0.5 cm to 1.5 cm) . estimate the rate of heat loss in watts for someone who is lightly dressed sitting in a comfortable room with a temperature of 20 c

Answers

The energy output is 714 Watts is loss.

According to the thermal conductivity equation, the rate of heat loss H is given by:

H=\swhere,

K is the heat conductivity coefficient.

A is for Area of Cross Section.

H = Heat loss rate

Temperature differential between the two sides of the body in the given situation: x-Thickness of the material 71 -1

T = 37°C, or body temperature, and 12°C, or room temperature

initial instance.

A=2m x=0.01 m

H=174watt

to know more about Watt, visit to:

https://brainly.com/question/29034284

#SPJ4

Two objects, A and B, are pushed across the floor. Object B experiences a greater applied force. Which statement best describes what must be true for Object A to have a greater value of work? (2 points) Group of answer choices Objects A and B are pushed the same distance. Object B is pushed a much smaller distance. Object A is pushed a much smaller distance. Equal forces are applied to Objects A and B.

Answers

The greater value of work for object A can be true if object B is pushed at a much smaller distance. Therefore, option B is correct.

What is the work?

Work can be described as the energy utilized when a force is exerted to move a body through a specific distance. The work done describes both the exerted force as well as the displacement of the object.

The action of the applied force is to move a system in a straight line in the direction of the exerted force over a distance 'd'.

W= F ×d

Where 'd' is the displacement by an object, F' is the exerted force, and W is work done.

Given the force experienced by the object B is greater than object A:

[tex]F_{B} > F_A[/tex]

Now we know that the work done only depends upon the force and distance. In order to have a greater value of the work for object A. Object B is pushed a much smaller distance than object A.

Learn more about work, here:

brainly.com/question/13662169

#SPJ1

the source of all magnetism is * 1 point a) tiny pieces of iron. b) tiny domains of aligned atoms. c) ferromagnetic materials. d) moving electric charge.

Answers

According to the claim, all magnetism originates through moving electric charge.

What are 2 examples of magnetism?

There are always two magnetic poles. Stainless steel, iron, nickel, cobalt, and several rare earth metals are a few examples of magnetic materials. An magnetic field weakly repels diamagnetic materials like copper and gold. An magnetic field has a weak attraction for paramagnetic materials like calcium and aluminum.

Why is magnetism important?

Mathematically, Maxwell demonstrated how a shifting magnetic field generates a shifting electric field (and vice versa). As a result, magnetism is crucial because it helps humans produce electrical energy. In actuality, spinning magnets are the source of the majority of the energy we consume today.

To know more about magnetism visit:

brainly.com/question/13026686

#SPJ4

The genetic researchers at Bay Medical Company are interested in spiders with the trait for medium silk flexibility. They think this silk can be used for medical purposes such as for making stitches and for creating artificial tendons. Why do you think offspring B has the medium silk flexibility trait?

Answers

Bay Medical Company's genetic researchers are interested in spiders with medium silk flexibility. They believe this silk can be employed in medical applications such as stitching and constructing artificial tendons.

What is the genetics of spider silk?

Siblings may inherit various features from their parents and from each other depending on the specific gene combinations that each seeds carries. The variance in silk inflexibility among spider seed is explained by random gene recombination.

The inflexibility of silk is another issue. This point is shared by all of Darwin's dinghy spiders (they all have spider silk with some flexibility), yet some spiders create silk that is more flexible than other spiders' silk. There are three levels of silk inflexibility: high, medium, and low.

To know more about silk refer to:

https://brainly.com/question/1120072

#SPJ1

which type of solar energy technology(s) can continue to generate electricity for a while after the sun goes down? select all that apply.

Answers

Grid-Tied Residential Solar Cells energy technique (or technology(s)) can keep producing electricity after the sun sets for a while.

How can we harness the sun's energy?

Solar energy collectors and photovoltaic solar systems are two ways that human ingenuity has created to harness solar energy and convert it into electricity. A solar thermal process utilizes the heat from the sun to create steam, which powers a turbine and ultimately creates electricity.

What exactly is a solar power system?

In addition to the components that convert the immediate (DC) electricity generated by modules into the ac current (AC) electricity needed to power all of the home's appliances, systems also feature mounting structures that guide panels toward the sun.

To know more about energy visit:

https://brainly.com/question/1932868

#SPJ4

Grid-Tied Residential Solar Cells energy technique (or technology(s)) can keep producing electricity after the sun sets for a while.

How can we harness the sun's energy?

Solar energy collectors and photovoltaic solar systems are two ways that human ingenuity has created to harness solar energy and convert it into electricity. A solar thermal process utilizes the heat from the sun to create steam, which powers a turbine and ultimately creates electricity.

What exactly is a solar power system?

In addition to the components that convert the immediate (DC) electricity generated by modules into the ac current (AC) electricity needed to power all of the home's appliances, systems also feature mounting structures that guide panels toward the sun.

To know more about energy visit:

brainly.com/question/1932868

#SPJ4

calculate the angular velocity of a 30 cm radius car tire when the car travels at 30.0 m/s (about 54 km/h).

Answers

The angular velocity of a car tire is 1 rad/s.

What is angular velocity?

Angular velocity is the speed at which the angle between two bodies changes when an object rotates or revolves around an axis. This displacement is depicted in the image by the angle formed by a line on one body and a line on the other.

We know,

Angular velocity = ω = [tex]\frac{V}{R}[/tex]

Given,

V = 30 m/s

R = 30 cm

Putting values in the formula

ω = [tex]\frac{30}{30}[/tex] rad/s

= 1 rad/s.

To know more about angular velocity, check out https://brainly.com/question/20432894

#SPJ4

Other Questions
when the nurse is teaching patients about postmenopausal estrogen replacement therapy, which statement is correct? when the nurse is teaching patients about postmenopausal estrogen replacement therapy, which statement is correct? oral forms should be taking on an empty stomach for best absorption. the smallest dose that is effective will be prescribed. if estrogen is taken, supplemental calcium will not be needed. estrogen therapy should be long-term to prevent menopausal symptoms. a collective bargaining agreement is a. another term for a standard player contract. b. a statute that sets forth the rights of a player as a member of a team. c. an advising agreement between a player and an agent that is mandated by the players association. d. a contract for all players in the league covering their hours, wages and terms and conditions of employment. An employee who earns $12/hour, worked 37 hours this week, is paid a commission of $40 for each sale, and makes 9 sales during the same week, has earned total commissions of $ . You receive paychecks every two weeks. Your first paycheck is for $217. The second is for $258. The third is for $229. What is the combined value of these three paychecks? Which sentence from the passage supports the claim in the 1879 speech by chief joseph that actions speak louder than words?. Please Help! (Language=Java) This is due really soon and is from a beginner's computer science class!Assignment details:CHALLENGESPrior to completing a challenge, insert a COMMENT with the appropriate number.1) Get an integer from the keyboard, and print all the factors of that number. Example, using the number 24:Factors of 24 >>> 1 2 3 4 6 8 12 242) A "cool number" is a number that has a remainder of 1 when divided by 3, 4, 5, and 6. Get an integer n from the keyboard and write the code to determine how many cool numbers exist from 1 to n. Use concatenation when printing the answer (shown for n of 5000).There are 84 cool numbers up to 50003) Copy your code from the challenge above, then modify it to use a while loop instead of a for loop.5) A "perfect number" is a number that equals the sum of its divisors (not including the number itself). For example, 6 is a perfect number (its divisors are 1, 2, and 3 >>> 1 + 2 + 3 == 6). Get an integer from the keyboard and write the code to determine if it is a perfect number.6) Copy your code from the challenge above, then modify it to use a do-while loop instead of a for loop. Which bacterial infection affects the membranes surrounding the brain and spinal cord and forwhich college students living in dormitories are at a higher risk than other populations?O meningitisO influenzatuberculosispneumonia The game Just Dance involves players copying the dance moves of the actors in the game. What kind of game mode does Just Dance use? A. turn-based game mode B. card-based game mode C. King of the Hill game mode D. movement game mode Question regarding Modulus attached below. A 10.5 kg board 6.00 m long issupported by two sawhorses, one at each end. A 4.45 kg saw sits on the board 1.80 m from the left end. Find the upward force that the LEFT sawhorse exerts on the board. (Pick 5 Lotto) Write a program to simulate a pick-5 lottery game. Your program generates and stores 5 distinct random integers between 1 and 9 (inclusive) into an array. The program then prompts the user to enter 5 distinct integers between one and nine and stores the numbers into a second array. The program then compares and determines whether the two arrays are identical. If the two arrays are identical, then the user wins the game; otherwise, the program outputs the number of matching digits and their position in the array.Use default_random_engine and unitform_int_distribution to generate the random numbers. See discussions to see engines and distributions details. Divide (25)1,658.To find the quotient, start by dividinginto____. A type of fossil fuel, known as ________, consists of deposits of moist sand and clay containing bitumen, a thick and heavy form of petroleum that is rich in carbon and poor in hydrogen. in what ways did the civil rights movement not only advance the rights of african americans but other minority groups as well? Please Help!What is the molar mass of phenol (CH5OH)? The atomic masses of C, H and Oare 12.0, 1.01 and 16.00 amu respectively.O 94.1 g/moleO 29.0 g/moleO 46.0 g/moleO 100 g/mole Who deposited goods in New Orleans for shipment to the Gulf, Europe, or the East Coast of the United States? ou need sutures to close a cut on your hand, and lidocaine is used to numb the area. lidocaine works by The low temperature on Saturday was 10 degrees below zero degrees Celsius. On Sunday, the low temperature was 30 degreeswarmer.Which two statements apply to the low temperature on Sunday?A Temperature on Sunday was 40C.BCTemperature on Sunday was 20C.The temperature on Sunday was 20 degrees below zero degrees Celsius.The temperature on Sunday was zero degrees Celsius.LE 4. What is the area of the triangle shown on the graph below?(1) 10(2) 11(3) 14(4) 25 1. a set of p orbitals can accommodate a maximum of 6 electrons. 2. there are 10 d orbitals in a set. 3. none of the p orbitals are spherically symmetric. 4. the fifth shell with n