Advantages and disadvantages of titration?
Answer:
What are the advantages of titration?
Titrimetric analysis commonly referred to as volumetric analysis offers distinct advantages over cumbersome gravimetric methods:
Speed of analysis.
Instantaneous completion of reactions.
Greater accuracy due to minimization of material loss involved in decanting, filtration, precipitation or similar operations.
Explanation:
Disadvantages
It is a destructive method often using up relatively large quantities of the substance being analysed.
It requires reactions to occur in a liquid phase, often the chemistry of interest will make this inappropriate.
It can produce significant amounts of chemical waste which has to be disposed of.
It has limited accuracy.
hope this helps Please inform me if its helpful
The advantages of titration:
It is generally cheap, requiring little in the way of equipment.It does not require a high level of skill.It can often be done rapidly.Results are immediately available.Disadvantages
It is a destructive method often using up relatively large quantities of the substance being analysed.It requires reactions to occur in a liquid phase, often the chemistry of interest will make this inappropriate.It can produce significant amounts of chemical waste which has to be disposed of.What is titration?Titration is a quantitative technique where a solution of a known concentration is used to determine the concentration of the unknown solution.
Titration is a technique where a solution of known concentration is used to determine the concentration of an unknown solution.
The Titration Process Is Influenced by the Following Factors:
Measuring methodInstrument (instrument uncertainty/abrasion of the burette)Electrodes (electrode uncertainty/alteration of electrodes)HandlingBalance (weighing error)TemperatureVolumetric solution (change of the concentration, through alteration, carbon dioxide, vaporation of water/solvent)Learn more about titration here:
https://brainly.com/question/13307013
#SPJ2
Pls help if you only know the correct answer! Thanks!!
Answer:
1. H=2, O=1
2. H=4, O=2
3. C=1, O=1
4.
a. reactants C=1, O=2
b. products C=1, O=2
5.
a. reactants H=4, O=2
b. products H=4, O=2
6
a. reactants C=1, O=1, H=4
b. products C=1, O=1, H=4
What is the percent, by mass, of water in MgSO4.2H20
Answer:51.1%
Explanation:
Mass percent : It is defined as the mass of the given component present in the total mass of the compound. Formula used : First we have to calculate the mass of and . Mass of = 18 g/mole Mass of = 7 × 18 g/mole = 126 g/mole Mass of = 246.47 g/mole Now put all the given values in the above formula, we get the mass percent of in . Therefore, the mass percent of in is, 51.1%
is change in color a physical change
Answer: A change in color is not always a chemical change. If one were to change the color of a substance in a non-chemical reaction scenario, such as painting a car, the change is physical and not chemical.
Solid → Liquid: Melting
Solid → Gas: Sublimation
Liquid → Gas: Vaporization
Gas → Liquid: Condensation
Explanation:
Anyone down to start a convo
HELP PLEASE ASAP ILL GIVE BRAINLEST
Answer:
D
Explanation:
braineist pls???????????
Answer:
C
Explanation:
gram is bigger than atom duh
draw the lewis structure for co with an arrow representing the dipole moment. refer to figure 10.10 to estimate the percent ionic character of the co bond.
The formation of molecule can easily be shown by drawing Lewis dot structure. Since atom's Lewis dot structure has three dots. Therefore, in below given ways, we can have Lewis dot structure of CO.
What is Lewis dot structure?Lewis dot structure is a way to represent the valence electron of an element in the form of dot. These are mainly beneficial in understanding the chemical formula of covalent compound.
Carbon contains four valence electrons, whereas oxygen has six. Carbon has five electrons but oxygen has seven electrons if just one link is established among carbon and oxygen atoms.
The solitary connection formed in between two atoms is insufficient to form an octet on every atom. A triple bond is required to finish the octet of the each atom in CO. The six electrons shared by these two atoms create a triple bond. The dipole moment arrow will point between carbon to oxygen.
Therefore, in above given ways, we can have Lewis dot structure of CO.
To learn more about Lewis dot structure, here:
https://brainly.com/question/20300458
#SPJ5
How did President Wilson anger civil rights advocates?
Answer:
He put segregationists in charge of federal agencies...
Explanation:
...
Answer:
He placed segregationists in charge of federal agencies.
Explanation:
Fast pls due rn help fast pls
Answer:
Section a:
1. stratosphere
2. radio waves
3. nitrogen, oxygen
4. humidity
5. smoke, fog
Section b:
1. ozone layer
2. stratosphere
3. carbon dioxide (CO2)
4. smoke
5. tropical areas
Section c:
1. false, it is clear
Hope those help and are all correct
a) how many moles of o2 are needed to burn 1.50 mol of c8h18?
Answer:
Moles of oxygen needed to burn given amount of octane is 16.875 moles.
Explanation:
20. A way to describe a chemical reaction
a. Equations
c. Molecules
b. Metals
d. Elements
PLEASE HELP I AM FAILING
Answer:
160.3 g S
Explanation: there you go
why do solids maintain their shape whereas fluids do not
What is the formula for the binary ionic compound formed between
zinc and nitrogen.
Answer: Zinc nitride (Zn3N2) is an inorganic compound of zinc and nitrogen, usually obtained as (blue)grey crystals. It is a semiconductor. In pure form, it has the anti-bixbyite structure.
Chemical formula: Zn3N2
Space group: Ia-3, No. 206
EC Number: 215-207-3
Appearance: blue-gray cubic crystals
Explanation:
which two groups of the periodic table contain the most chemically reactive metals?
Answer:
group 3 and 12 alkali and alkaline earth metal
If I remove the table from under the book, what will happen to the book? Think about Newton’s second law of motion. Is there an acceleration? What caused the acceleration?
Newton’s second law of motion is a dot product of mass and acceleration, if you remove the table from, under the book, gravity will act on the book and pull it downwards to the centre of the earth
Newton's Second law of motion states that "the acceleration of an object depends upon two variables – the net force acting on the object and the mass of the object."
In our case the mass of the book and the force of gravity
Learn more about Newton's Laws of motion:
https://brainly.com/question/10454047
a terminal alkyne was treated with nanh2 followed by propyl iodide. the resulting internal alkyne was treated with ozone followed by water, giving only one type of carboxylic acid. provide a systematic, iupac name for the internal alkyne.
The systematic Iupac name for the internal alkyne is : 4-octyne
When only one type of carboxylic acid is made the internal alkyne will be symmetric and the compounds can be 3-hexane or 4-octyne but given that one of the reactants is propyl iodide. Therefore
The Internal alkyne will have an Iupac name 4-octyne
Hence we can conclude that the systematic Iupac name for the internal alkyne is 4-octyne
Learn more about 4-octyne : https://brainly.com/question/24355559
AC current is produced by which of the following things?
A. Remotes
B. Generators
C. Lights
D. Lasers
Answer:
B
Explanation:
A wave with a smaller wavelength has _______ energy than one with a larger wavelength.
A wave with a smaller wavelength has UV radiation energy than one with a larger wavelength.
Additional information :- It is harmful rays as a continuous effect on humans can cause skin and eye disorders. ... A large amount of UV rays comes from the sun is absorbed by the ozone layer in the atmosphere. Some other sources of UV rays are black lights, mercury lamps, and tanning lights.Uses of UV Rays
The UV light is found in nature from sunlight and the application of sunlight is present in every field. It is present in both commercial and industrial purposes. Generally, it is used in purifying air, water treatment, skin treatment, indoor gardening, things identifying, and more uses by UV lamps.The UV rays are used in a wide range, ranging from medical therapy to photography.▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
PLEASE PEOPLE I NEED HELP PLEASE IF YOU SEE THIS HELP ME ! :,( !!!!! PLEASEEEEEEEEE
PLEASE NO LINKSSS !!!!! HELP ME THIS ITS FOR HOMEWORK PLEASE HELPP!
Answer:
year 1 is 5.5%
year 2 is 7.5%
year 3 is 10.2%
Explanation:
since,
length of the transect covered in seaweed / total lenth of transect x 100
then,
0.55 / 10.0 x 100 = 5.5
and
0.75 / 10.0 x 100 = 7.5
and
1.02 / 10.0 x 100 = 10.2
you could also just move the decimal to the right once
:)
how many grams are in 4.07x10^15 molecules of calcium hydroxide
There are 5.01 × 10-⁷grams in 4.07 x 10¹⁵molecules of calcium hydroxide.
HOW TO CALCULATE MASS:
The mass of a substance can be calculated by multiplying the number of moles in the substance by its molecular mass.
However, given that the number of molecules in calcium hydroxide is 4.07 x 10¹⁵molecules, we need to calculate the number of moles in Ca(OH)2 as follows:
no. of moles of Ca(OH)2 = 4.07 x 10¹⁵ ÷ 6.02 × 10²³
no. of moles = 0.676 × 10-⁸
no. of moles = 6.76 × 10-⁹ moles.
Molar mass of Ca(OH)2 = 74.093 g/mol
Mass of Ca(OH)2 = 74.093 × 6.76 × 10-⁹ moles
Mass = 5.01 × 10-⁷grams.
Therefore, there are 5.01 × 10-⁷grams in 4.07 x 10¹⁵molecules of calcium hydroxide.
Learn more about how to calculate mass at: https://brainly.com/question/8101390?referrer=searchResults
How long is a sunflower seed? Select the best estimate.
15 meters
15 kilometers
15 millilmeters
15 centimeters
Answer:
15 millimeters
Explanation:
the other answer choices are too large.
Answer:
15 millimeters
Explanation:
The other options are too long.
PLEASE HELP QUICK I NEED 14-16 (JUST 6 PROBLEMS) ANSWERED AND FULL WORK SHOWN FOR FACTOR LABEL METHOD ITS 100 POINTS AND I WILL MARK BRAINLYEST.
Answer:
14. 21.51 liters
15. 12.9 centimeters
16. 3400 milliliters
Explanation:
I don't really know how to show the work
Minerals are _______ substances with a fixed crystal structure and a unique chemical composition. Processing ore sometimes involves _______ or grinding minerals. Prehistoric people used _______ for knives and arrowheads. The average American house contains about _______ pounds of minerals. Early _______ used rocks as simple tools as early as 2. 6 million years ago.
Minerals are solid substances with a fixed crystal structure and a unique chemical composition. Processing ore sometimes involves crushing or grinding minerals. Prehistoric people used flints for knives and arrowheads. The average American house contains about 250,000 pounds of minerals. Early Human culture used rocks as simple tools as early as 2. 6 million years ago.
What are minerals?Minerals are solid substances and are characterized by a fixed crystal structure and a unique chemical composition.
Early hominids used rocks as simple tools before the advent of modern civilization where other materials were used.
Read more on minerals:
https://brainly.com/question/25477252
Answer:
1. naturally occurring
2. crushing
3. flint
4. 250,000
5. hominids
The diagram below shows the Moon at four positions in its orbit around Earth
An observer on Earth could see a solar eclipse when the Moon is at position
the answer is position no. 4
How many moles are in 34.6 g of sulfur oxide (SO)?
What rule predicts the, stability of a atoms forming compounds.
Answer:The octet rule
Explanation:that there is eight electrons in the valence shell to make it stable.
Explanation:
atom with greater stability have less energy, so a reaction that the stability of the atom will release in the form of heat or light.
SERIOUS INQUIRES ONLY
does anyone like pistachio ice cream? fr fr bc like everyone says it’s weird but it’s so good yk like fr. don’t just be answering me for point yo i’ll come after you.
Answer:
I feel it's an extremely underrated Ice cream flavor!
Explanation:
Answer:
it's pretty good
Explanation:
Some acids like acetic acid and tartaric acid cannot be tasted
TRUE OR FALSE
The statement is a false.
An acid is a substance which when dissolved in water, produces hydroxonium ion, as the only positive ion.
Some properties of acid include:
They have sour tastes andStrong acids are corrosive.There are two types of acids which includes:
Strong acids: These are the acids that ionizes completely in solution.Weak acid: These are the acids that ionizes incompletely in solution.Examples of weak acid is acetic acid and tartaric acid.
They can be used as food substances like vinegar and naturally occurs on fruit like banana or grape.
Therefore, weak acids such as acetic acid and tartaric acid can be tasted.
Learn more about weak acids here:
https://brainly.com/question/25148363
The given statement is False.
Some acids like acetic acid and tartaric acid can be tasted.
Organic acids, such as acetic, citric, malic, and fumaric acids in fruits and vegetables, and tartaric acid in wine, contribute significantly to the sour flavor of foods and beverages. Many inorganic acids taste sour in dilute solutions.
Tartaric acid is fairly water soluble and has a pronounced tart flavor. Tartaric acid is present naturally in grapes and bananas and has been shown to improve the flavor of grape and lime-flavored beverages. Tartaric acid may aid in the treatment of glucose intolerance and digestion.
Acetic acid is a colorless liquid having a sour flavor. Although it is most frequently associated with vinegar, this acid has a wide range of different applications in a variety of industries. Acetic acid is a colorless liquid that is composed of chemical compounds.
To know more about Acetic acid,
brainly.com/question/26169392
Suppose you have samples of three unknown solids. Explain how you could use their properties to determine whether or not they are ionic solids.
Given a sample of three unknown solids, we would be able to deduce which are ionic solids by their melting and boiling points, conductivity in water, and the insulation they provide.
What are Ionic solids?An ionic solid is a solid formed by ionic bonds. They are the solid version of ionic compounds, which are held together by strong electrostatic energies. What properties do they possess?Among their many properties, ionic solids possess high melting and boiling points.These solids are also known to conduct electricity well when dissolved into water, however, this can be tested after melting them as they will not conduct electricity in a solid state.A final property that we can use to identify them is that they provide a good means of insulation.Each of these properties can be tested and will allow us to determine the ionic solids amongst the samples.Therefore, we can find the ionic solids amongst the samples by testing their melting and boiling points, conductivity in water, and the insulation they provide, given that each of these should provide high values to indicate an ionic solid.
To learn more about ionic solids visit:
https://brainly.com/question/157294?referrer=searchResults