Answer:
Rust forms on iron filings faster than on a large iron block
Explanation:
Because the surface area exposed to air in the refrigerator is greater than its area by mass, the rust-forming reaction occurs faster.
An example of competition between members of two different species is
A) mold growing on a dead tree that has fallen in the forest
B) purple loosestrife plants growing in the same wet areas as cattail plants
C) a coyote feeding on the remains of a deer that died of starvation
D) two male turkeys displaying mating behaviors to attract a female turkey
Pls help
Answer:
B) purple loosestrife plants growing in the same wet areas as cattail plants
Explanation:
Competition between members of two species means that two different species are "fighting for" or desire the same resource. This resource could be shelter, food, territory, etc.
An organism cannot compete if it is already dead, so that eliminates answer choices A and C. Answer choice D is wrong because these are two organisms of the same species.
Answer choice B is correct because there are two different species competing for one area of land.
a polluted lake is 0.300 μg (micrograms) per liter of water, what is the total mass of mercury in the lake, in kilograms, if the lake has a surface area of 15.0 square miles and an average depth of 27.0 feet?
Answer:
95.9 kg
Explanation:
First we convert 15.0 mi² to m²:
15.0 mi² * ([tex]\frac{1609.34 m}{1mi}[/tex])² = 3.88x10⁷ m²Then we convert 27.0 ft to m:
27.0 ft * [tex]\frac{0.3048m}{1ft}[/tex] = 8.23 mNow we calculate the total volume of the lake:
3.88x10⁷ m² * 8.23 m = 3.20x10⁸ m³Converting 3.20x10⁸ m³ to L:
3.20x10⁸ m³ * [tex]\frac{1000L}{1m^3}[/tex] = 3.20x10¹¹ LNow we calculate the total mass of mercury in the lake, using the given concentration:
0.300 μg / L * 3.20x10¹¹ L = 9.59x10¹⁰ μgFinally we convert μg to kg:
9.59x10¹⁰ μg * [tex]\frac{1kg}{1x10^9ug}[/tex] = 95.9 kgA typical dollar bill is 15.50 cm by 6.50 cm.
Calculate the surface area in square meters, square centimeters and square nanometers
Answer:
0.010075 m²100.75 cm²1.0075x10¹⁶ nm²Explanation:
As the measurements are given to us in centimeters, let's start by calculating the surface area in square centimeters:
Area = 15.50 cm * 6.50 cm = 100.75 cm²Now we convert 100.75 cm² to m², as follows:
100.75 cm² * [tex](\frac{1m}{100cm}) ^2[/tex] = 0.010075 m²Finally we convert 0.010075 m² to nm², as follows:
0.010075 m² * [tex](\frac{1nm}{1x10^{-9}m}) ^2[/tex] = 1.0075x10¹⁶ nm²Gamma rays have the highest frequency among all common electromagnetic radiations. It means the gamma rays have the highest energy and the longest wavelength
Answer:
yes
Explanation:
cos of high electron transfer
HELP PLS THIS IS SO HARD AHHHHHHH
what is the enthalpy of the overall chemical reaction
Answer:
For a chemical reaction, the enthalpy of reaction (ΔHrxn) is the difference in enthalpy between products and reactants; the units of ΔHrxn are kilojoules per mole
The pH for several solutions is given below. After filling in each blank with the correct number, arrange the substances mentioned at the beginning of each sentence in order from most acidic to most alkaline.
a. Black coffee has a pH of 5, therefore its H+ concentration is __________times greater than a solution with a pH of 10
b. Urine has a pH of 6, therefore its H+ concentration is ________times greater than a solution with a pH of 9.
c. Household ammonia has a pH of 11, therefore its H+ concentration is__________ times less than a solution with a pH of 7 .
d.Grapefruit juice has a pH of 3, therefore its H+ concentration is_______ times greater than a solution with a pH of 5 .
2
100
1000000
4
100000
10
3
100,000
1000
5
how
the
Way
of
it's
the Base
Look at the equation CO2 + H2 = CO + H20.
CO is a ________
reactant and a product
reactant
product
Answer:
CO is considered as a product.
Explanation:
A general chemical equation for a combination reaction follows:
To write a chemical equation, we must follow some of the rules:
The reactants must be written on the left side of the direction arrow.
A '+' sign is written between the reactants, when more than one reactants are present.
An arrow is added after all the reactants are written in the direction where reaction is taking place. Here, the reaction is taking place in forward direction.
The products must be written on the right side of the direction arrow.
A '+' sign is written between the products, when more than one products are present.
For the given chemical equation:
are the reactants in the reaction and are the products in the reaction.
Hence, CO is considered as a product.
g The activation energy for diffusion depends on the strength of atomic bonds. Higher strength bonds result in higher activation energies. How do you predict the activation energy for self diffusion will be related to melting temperature
Answer:
Yes, the activation energy for self diffusion is related to melting temperature.
Explanation:
The activation energy for self diffusion is related to melting temperature because bonds result due to activation energies and we know that bonds are break down when the temperature is increases and as a result the solid substance melts and change into liquid state. When the bonds between atoms are broken down with the use of heat energy the state of matter changes so we can say that activation energy is related to temperature.
Learning Task 1. Read each item carefully. Choose the letter of your answer.
1. Which type of soil is characterized as having the finest particles holding greater amount of water?
A. Loam
B. Clay
C. Sand
2. Which type of soil is best for planting?
A. Loam
B. Clay
C. Sand
3. How does each soil types differ?
A. Texture
B. Color
C. Both A & B
4. Which type of soil do you usually expect if the community is along the seashore?
A. Loam
B. Clay
C. Sand
5. Why is soil important to living things?
A. Forms part of the earth where animals live
B. Provides the necessary nutrients needed by plants
C. Serves as a place where people live
D. All of the above
Answer:
1. B
2. A
3. C
4. C
5. D
Explanation:
Soil is regarded as the solid unconsolidated material of the earth crust. Soil is of three different types namely: Sandy soil, clay soil and loamy soil. These three different soil types possess different properties that distinguish them. Some of them are:
- CLAY soil is characterized as having the finest particles and can hold greater amount of water i.e. have a high water holding capacity.
- LOAMY SOIL is the best soil type for planting agricultural crops because it has the highest concentration of nutrients that suited for plant growth.
- loamy, Sandy and clay differ in how we feel when touched i.e. texture, and colour.
- SANDY soils are the kind of soils that are found in Sea shores and beaches.
- Soil is important to living things as it forms part of the earth where animals live, provides the necessary nutrients needed by plants, serves as a place where people live.
aluminum chloride and bubbles of hydrogen gas are produced when metallic aluminum is placed in hydrochloride acid. what is a balanced equation for this reaction?
Answer:
AlCl3 + HCl ===> AlCl4 +H-
what are the most common measurements used to describe gases in chemistry
Four quantities must be known for a complete physical description of a sample of a gas: temperature, volume, amount, and pressure. ... The height of the mercury column is proportional to barometric pressure, which is often reported in units of millimeters of mercury (mmHg), also called torr.
Guys i need a long inforation about....
"Formation of colloids"
Please and thank you
Answer:
Colloids
There are two basic methods of forming a colloid: reduction of larger particles to colloidal size, and condensation of smaller particles (e.g., molecules) into colloidal particles. Some substances (e.g., gelatin or glue) are easily dispersed (in the proper solvent) to form a colloid; this spontaneous dispersion is called peptization. A metal can be dispersed by evaporating it in an electric arc; if the electrodes are immersed in water, colloidal particles of the metal form as the metal vapor cools. A solid (e.g., paint pigment) can be reduced to colloidal particles in a colloid mill, a mechanical device that uses a shearing force to break apart the larger particles. An emulsion is often prepared by homogenization, usually with the addition of an emulsifying agent. The above methods involve breaking down a larger substance into colloidal particles. Condensation of smaller particles to form a colloid usually involves chemical reactions—typically displacement, hydrolysis, or oxidation and reduction.
Based on your knowledge of factors affecting the rate of reaction, why is there a danger of explosions in places such as flour mills and coal mines where there are large quantities of powdered, combustible materials? 
Calculate the amount of heat required to completely sublime 55.0 g of solid dry ice CO2 at its sublimation temperature. The heat of sublimation for carbon dioxide is 32.3 kj mol
Answer:
40.4 kJ
Explanation:
Step 1: Given data
Mass of CO₂ (m): 55.0 gHeat of sublimation of CO₂ (ΔH°sub): 32.3 kJ/molStep 2: Calculate the moles corresponding to 55.0 g of CO₂
The molar mass of CO₂ is 44.01 g/mol.
n = 55.0 g × 1 mol/44.01 g = 1.25 mol
Step 3: Calculate the heat (Q) required to sublimate 1.25 moles of CO₂
We will use the following expression.
Q = n × ΔH°sub
Q = 1.25 mol × 32.3 kJ/mol = 40.4 kJ
Give the following for SO2 and BrF5:
(a) Number of domains on central atom (b) Domain geometry (c) Molecular geometry (d) Hybridization of central atom
Answer:
The given molecules are SO2 and BrF5.
Explanation:
Consider the molecule SO2:
The central atom is S.
The number of domains on S in this molecule is three.
Domain geometry is trigonal planar.
But there is a lone pair on the central atom.
So, according to VSEPR theory,
the molecular geometry becomes bent or V-shape.
Hybridization on the central atom is
[tex]sp^{2}[/tex].
Consider the molecule BrF5:
The central atom is Br.
The number of domains on the central atom is six.
Domain geometry is octahedral.
But the central atom has a lone pair of electrons.
So, the molecular geometry becomes square pyramidal.
The hybridization of the central atom is [tex]sp^{3} d^{2}[/tex].
The shapes of SO2 and BrF5 are shown below:
molar mass of Beryllium
Answer:
The molar mass of Beryllium is 9.012182 u
A 29.00 mL sample of an H2SO4 solution of unknown concentration is titrated with a 0.1122 M KOH solution. A volume of 43.22 mL of KOH was required to reach the equivalence point.
What is the concentration of the unknown H2SO4 solution? Express your answer using four significant figures.
Answer: The concentration of the unknown [tex]H_{2}SO_{4}[/tex] solution is 0.167 M.
Explanation:
Given: [tex]V_{1}[/tex] = 29.00 mL, [tex]M_{1}[/tex] = ?
[tex]V_{2}[/tex] = 43.22 mL, [tex]M_{2}[/tex] = 0.1122 M
Formula used to calculate concentration of the unknown [tex]H_{2}SO_{4}[/tex] solution is as follows.
[tex]M_{1}V_{1} = M_{2}V_{2}[/tex]
Substitute the values into above formula as follows.
[tex]M_{1}V_{1} = M_{2}V_{2}\\M_{1} \times 29.00 mL = 0.1122 M \times 43.22 mL\\M_{1} = 0.167 M[/tex]
Thus, we can conclude that concentration of the unknown [tex]H_{2}SO_{4}[/tex] solution is 0.167 M.
Question 8 (5 points)
(08.02 MC)
A 10 M concentrated stock solution of NaCl was used to prepare 5 liters of diluted 1 M solution. Which of the following statements is true about
the
process used to achieve this required dilution? (5 points)
O a
The volume of stock solution used was less than 0.4 liters.
Oь
The volume of stock solution used was more than 5 liters.
Ос
The volume of the solvent used was less than 0.4 liters.
Od
The volume of the solvent used was less than 5 liters.
Answer:
d . The volume of the solvent used was less than 5 liters.
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to calculate the volume of the stock (initial) solution by using the following equation:
[tex]M_1V_1=M_2V_2[/tex]
Thus, we solve for, V1, which stands for the aforementioned volume of stock solution:
[tex]V_1=\frac{M_2V_2}{M_1}[/tex]
Then, we plug in to obtain:
[tex]V_1=\frac{5L*1M}{10M}\\\\V_1=0.5L[/tex]
Now, since the final volume was 5 L, we can infer that the volume of solvent is 4.5 L and that of the stock solution 0.5 L for a total of 5 L of diluted solution; therefore, the correct reasoning is d . The volume of the solvent used was less than 5 liters.
Regards!
Answer:
The volume of the solvent is less than 5
Explanation:
Balance the equation by ion electron method
Answer:i believe you are to decompose the formula (i think)
What is leukemia
A
B
C
D
C. Cancer that affects the blood
Hope I could help!
HELP WITH MY 2 QUESTION
1-What type of packaging is used for milk?
2-How do the physical and chemical properties (material, reactivity, shape, hardness, color)
of each packaging type help create new and better product?
Answer:
1. Milk comes in a range of sizes and forms, and is packaged in a range of materials. Glass bottles, plastic coated paper board, blow mold nonreturnable polyethylene containers, plastic pouches, and returnable rigid polycarbonate containers are among the commercial containers available.
Dont know the answer to the second one sorry :(
Determine the Concentration of the Unknown Strong Acid
In this activity you will use the virtual lab to determine the concentration of a strong monoprotic acid. To do this, you can perform
a titration using NaOH and phenolphthalein found in the virtual lab. (Note: The concentration of the acid is between 0.025M and
2.5M so you will need to dilute the NaOH solution so that the volume to reach the endpoint is between 10 and 50 mL).
Once you have determined the concentration of the acid, please enter your answer into a form at the bottom of this page.
Virtual
Lab
File -
Edit -
View
Help -
EN
Unknown Acid Problem
Stockroom
Workbench 1
Solutions
Glas
Tools
MacBook Pro
888
%
&
The sloth is able to camouflage by moving really slowly and
A. changing colors
B. hanging upside down
D. having fur that is a similar color to tree barks with algae growing on it
Answer:
D. having fur that is a similar color to tree barks with algae growing on it
Explanation:
Choice A doesnt make sense because sloths do not change colors, and hanging upside down would not protect you from prey or blend in. D matches the description of a sloth.
Answer:
Having fur that is a similar color to tree barks with algae growing on it.
Explanation:
Which is most likely the reason the U.S government made such an investment
Answer:
The U.S government made such an investment because they're most likely to reduce harmful emissions.
why Hydroxide ion is less strong base than hydride ion
Answer:
The hydride ion,H−is a stronger base, so it will abstract a proton from the water. As the water will give protons, so water will work as an acid and an acid-base reaction will take place. Hydride ions get protons from water and form hydrogen gas and hydroxide ions.
Sodium hydride is the chemical compound with the empirical formula NaH. This alkali metal hydride is primarily used as a strong yet combustible base in organic synthesis. NaH is a saline (salt-like) hydride, composed of Na+ and H− ions, in contrast to molecular hydrides such as borane, methane, ammonia, and water.
What is the concentration of a solution that is made by diluting 50.0 mL of a 0.40 M NaCl solution to a final volume of 1000.0 mL?
Answer:
The correct answer is 0.020 M.
Explanation:
To solve this problem, we can use the equation M1V1 = M2V2, where M represents the molarity of the solution and V represents the volume of solution. Since we are given that the original solution is 50 mL and 0.40 M, these values are V1 and M1, respectively. The solution after dilution has a volume of 1000 mL, so this value is V2. We are solving for the molarity after dilution, which represents M2.
If we plug in the values specified above, we get the following:
M1V1 = M2V2
(0.40 M)(50.0 mL) = (M2)(1000.0 mL)
Solving for M2, we get:
M2 = 0.020 M
Notice that our answer has 2 significant figures because 0.40 has 2 significant figures, the least of any values given in the problem.
Therefore, the answer is 0.020 M.
Hope this helps!
A mixture of gases at 2.99 atm can You have two gases, and , at the same temperature. Determine the ratio of effusion rates of and .ists of 13.2 moles of hydrogen gas and 19.1 moles of helium gas. Determine the partial pressure of the helium gas.
Answer:
Given total pressure of the gas mixture(hydrogen and helium) is 2.99 atm
Number of moles of hydrogen is ---- 13.2 mol
Number of moles of helium is ---- 19.1 mol
Determine the partial pressure of the helium gas.
Ratio of effusion rates of the two gases.
Explanation:
According to Dalton's law of partial pressures,
partial pressure of a component gas in a mixture is:
partial pressure of a gas = total pressure x mole fraction
mole fraction of helium gas is:
[tex]mole fraction of helium gas = \frac{number of moles of helium gas}{total number of mioles} \\=>mole fraction of He= \frac{19.1mol}{(19.1+13.2)mol} \\=>mole fraction of He = 0.591\\[/tex]
Partial pressure of He gas is:
[tex]Partial pressure of He =mole fraction of He * total pressure\\ =0.591 x 2.99atm\\ =1.77atm[/tex]
Effusion rate of a gas is inversely proportional to its square root of its molecular mass.
[tex]\frac{rate of effusion of H2 gas}{rate of effusion of He gas} =\sqrt{\frac{molar mass of He gas}{molar mass of H2 gas} } \\=> \frac{rate of effusion of H2 gas}{rate of effusion of He gas}=\sqrt{\frac{4g.}{2g} } \\=>\frac{rate of effusion of H2 gas}{rate of effusion of He gas}=1.414:1[/tex]
Hence, rates of effusion of H2:He is 1.414:1.
For the reaction...
H2 (g) + Cl2 (g) <=> 2HCl (g) + heat
If the pressure in the system is increased, the equilibrium position will _______.
a)shift to the left
b)shift to the right
c)not shift position at all as 2 mol gas <=> 2 mol gas
Answer:
A: Shift to the left
Explanation:
The reaction would try to use up the added heat by making more H 2 and Cl 2.
Consider the dehydration of 2-propanol in sulfuric acid: There is a scheme of a reaction where CH3 CH CH3 with an OH group attached to the second carbon atom dehydrated in the presence of H2SO4. Draw the structure for the product of the dehydration of 2-propanol.
Answer:
CH2=CH-CH3
Explanation:
One of the ways of preparing alkenes is by dehydration of alcohols using sulphuric acid. The sulphuric acid merely acts as a catalyst in the process.
It begins with the protonation of the -OH group. This is followed by loss of water molecule since water is a good leaving group.
Loss of a proton now completes the mechanism and regenerates the acid catalyst.
The mechanism of dehydration of 2-propanol as well as the product formed in the process is shown in the image attached to this answer.