The ground‑state electron configuration of element sulfur (S) is; 1s² 2s² 2p⁶ 3s² 3p⁴, element krypton (Kr) is; 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 4p⁶ 5s² 4d¹⁰ 5p⁶, and the element cesium (Ce) is; 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 4p⁶ 5s² 4d¹⁰ 5p⁶ 6s¹.
The element S represents sulfur, which has an atomic number of 16. The full ground-state electron configuration for sulfur is obtained by filling up the orbitals with electrons according to the Aufbau principle and the Pauli exclusion principle.
Starting with the lowest energy level, the 1s orbital can hold a maximum of 2 electrons. Moving to the next energy level, the 2s orbital is filled with 2 electrons as well. Then, the 2p orbital is filled with a total of 6 electrons, distributed among its three sub-orbitals (2px, 2py, 2pz).
Putting it all together, the full ground-state electron configuration for sulfur is 1s² 2s² 2p⁶ 3s² 3p⁴.
The element Kr represents krypton, which has an atomic number of 36. Similarly, we follow the Aufbau principle and the Pauli exclusion principle to determine the electron configuration.
Starting with the 1s orbital, it is filled with 2 electrons. Then, the 2s orbital is filled with 2 electrons as well. After that, the 2p orbital is filled with 6 electrons. Moving on to the 3s and 3p orbitals, they are also filled with a total of 10 electrons.
The electron configuration continues with the 4s², 3d¹⁰, 4p⁶, 5s², 4d¹⁰, and finally, the 5p⁶ orbitals.
The full ground-state electron configuration for krypton is 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 4p⁶ 5s² 4d¹⁰ 5p⁶.
The element symbol Cs, can be explained by the filling of electrons in the various atomic orbitals according to the Aufbau principle and the Pauli exclusion principle.
The electron configuration begins with the 1s orbital, which can hold a maximum of 2 electrons. In cesium, it is filled with 2 electrons.
Next, we move to the 2s orbital, which is also filled with 2 electrons. Then, the 2p orbital is filled with 6 electrons, distributed among its three sub-orbitals (2px, 2py, 2pz).
Moving on to the third energy level, the 3s orbital is filled with 2 electrons, followed by the 3p orbital, which is filled with 6 electrons. Continuing to the fourth energy level, the 4s orbital is filled with 2 electrons, and then the 3d orbital is filled with 10 electrons.
In the fifth energy level, the 4p orbital is filled with 6 electrons. Next, the 5s orbital is filled with 2 electrons, and then the 4d orbital is filled with 10 electrons. Finally, in the sixth energy level, the 5p orbital is filled with 6 electrons, and the last electron goes into the 6s orbital.
Therefore, the full ground-state electron configuration for cesium is 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 4p⁶ 5s² 4d¹⁰ 5p⁶ 6s¹.
To know more about electron configuration here
https://brainly.com/question/29184975
#SPJ4
If you have 2 moles of iron chloride (FeCl3) and dissolve it in water to a final volume of 1L of water, what is the molarity and osmolarity of the solution?
A. Molarity of 0.5 mol/L and osmolarity of 2 osmol/L
B. Molarity of 0.5 mol/L and osmolarity of 8 osmol/L
C. Molarity of 2 mol/L and osmolarity of 2 osmol/L
D. Molarity of 2 mol/L and osmolarity of 8 osmol/L
The molarity of the solution is 2 mol/L, and the osmolarity of the solution is 8 osmol/L (D).
Molarity is defined as the number of moles of solute per liter of solution. In this case, we have 2 moles of iron chloride (FeCl3) dissolved in a final volume of 1 liter of water. Therefore, the molarity of the solution is:
Molarity = moles of solute / volume of solution
Molarity = 2 mol / 1 L
Molarity = 2 mol/L
Osmolarity, on the other hand, takes into account the number of particles in a solution that can contribute to osmotic pressure. Iron chloride dissociates into ions in water, forming Fe3+ and 3 Cl- ions. So, each mole of FeCl3 dissociates into 4 particles (1 Fe3+ ion and 3 Cl- ions).
Since we have 2 moles of FeCl3, the total number of particles in the solution is 2 mol x 4 particles/mol = 8 particles. Osmolarity is calculated by dividing the total number of particles by the volume of the solution:
Osmolarity = total particles / volume of solution
Osmolarity = 8 particles / 1 L
Osmolarity = 8 osmol/L
Therefore, the correct answer is option D: Molarity of 2 mol/L and osmolarity of 8 osmol/L.
Learn more about molarity: https://brainly.com/question/30404105
#SPJ11
why do you think we have chosen reagents that generate bromine in situ instead of using liquid bromine br2 as a reagent?
The main reason for choosing reagents that generate bromine in situ instead of using liquid bromine Br₂ as a reagent is safety and ease of handling.
Using reagents that generate bromine in situ offers several advantages over using liquid bromine Br₂ directly. First, bromine is a highly reactive and corrosive liquid, posing safety risks during handling. It can cause severe burns and has toxic fumes, requiring careful precautions and specialized equipment. By generating bromine in situ, we can minimize the direct exposure and risks associated with handling liquid bromine.
Reagents that generate bromine in situ are often more stable, easier to store, and have a longer shelf life compared to liquid bromine. They can be prepared and used as needed, eliminating the need for storing and handling potentially hazardous quantities of liquid bromine. Overall, the use of in situ generated bromine reagents provides a safer and more convenient approach for conducting chemical reactions that require bromine.
To know more about the Liquid bromine, here
https://brainly.com/question/9080164
#SPJ4
What is FALSE about nitrogen gas and carbondioxide?
1- Both are compounds
2- Both are gases
3- Elements in both substances are non-metals
4- Both are made up of atoms
Answer: Both are compounds
Explanation:
[tex]\text{N}_{2}[/tex] is an element, not a compound.
all of the following are ways that reduce the environmental impact of meat production except _______.
All of the following are ways that reduce the environmental impact of meat production except Raising beef cattle in feedlots. The correct option is A.
A traditional way of producing meat that often has a greater environmental impact than alternative methods is raising beef cattle in feedlots.
Feedlots pack a lot of animals into a small area, which can cause problems like water pollution from manure runoff, overuse of antibiotics, and significant greenhouse gas emissions.
Thus, the correct option is A.
For more details regarding environmental impact, visit:
https://brainly.com/question/13389919
#SPJ1
Your question seems incomplete, the probable complete question is:
Option B, D, and E, on the other hand, all help to lessen the environmental impact of meat production. Option B, pasture-based beef cattle production, permits more natural grazing and lessens the need for extensive feeding operations.
All of the following are ways that reduce the environmental impact of meat production except A.) Raising beef cattle in feedlots B.) Raising beef cattle in pastures C.) Decreasing the demand for meat D.) Developing meat substitutes E.) Raising beef cattle on rangelands
PLSSSSSS ANSWERRRRR???
Answer:
( j ) should be the correct option because atomic number of fluorine is 9 so, no. of electrons and protons should be same I.e. 9
Write a balanced equation for the reaction between chromium metal and hydrochloric acid to form chromium(III) chloride
and a reactive gas.
Answer: Cr(s) + HCl(aq) ⇒ CrCl3 (aq) + H2(g)
Explanation:
The energy needed to overcome intermolecular forces is called?
Answer:
vaporization.
Explanation:
HCl (aq) + NaOH (aq) = NaCl (aq) + H2O (l)
What type of reaction is the above?
Answer:
Neutralization reaction
Explanation:
It is a reaction between an acid and a base
Please help me ASAP I’m almost done.
Answer:
i think the answer is c
Explanation:
sorry if im wrong i am most likely wrong but ye
A 25.0 mL sample of 0.150M hydrocyanic acid is titrated with a 0.150M NaOH solution. What is the pH before any base is added? The Ka of hydrocyanic acid is 4.9 X 10^-10.
The pH before any base is added to the hydrocyanic acid solution is approximately 0.82.
Before any base is added, the pH of the hydrocyanic acid solution can be calculated using the Ka value and the initial concentration of the acid. The pH of a solution is determined by the concentration of H+ ions present. Hydrocyanic acid (HCN) is a weak acid that partially dissociates in water. The dissociation can be represented as follows: HCN ⇌ H+ + CN-. The Ka value of hydrocyanic acid (HCN) is given as 4.9 x 10^-10.
To find the pH before any base is added, we can assume that the dissociation of HCN is negligible compared to its initial concentration. Therefore, the concentration of H+ ions can be considered equal to the initial concentration of HCN. Using the given concentration of hydrocyanic acid (0.150M), we can calculate the pH by taking the negative logarithm (pH = -log[H+]). The concentration of H+ ions is 0.150M, and thus the pH is determined as the negative logarithm of 0.150, which is approximately 0.82.
To learn more about concentration, click here:
brainly.com/question/3045247
#SPJ11
A student dilutes 50.0 mL of a 0.10 mol/L to 0.010 mol/L. Which statement is true?
Question
What is the name of the covalent compound with the formula P2N3?
Answer:
P2N5
Explanation:
you have to plus it 2 times
.Rank these systems in order of decreasing entropy.
Rank from highest to lowest entropy. To rank items as equivalent, overlap them
1 mol of methane gas at 273 K and 40 L 1 mol of helium gas at 273 K and 20 L 1/2 mol of liquid helium at 100K 1 mol of helium gas at 273 K and 40 L 1 mol of hydrogen gas at 273 K and 40 L 1/2 mol of helium gas at 100 K and 20 L 1/2 mol of helium gas at 273 K and 20 L Greatest entropy Least entropy
Entropy is a measure of the disorder of a system. It is the measure of the number of possible arrangements (or microstates) of the system, multiplied by Boltzmann's constant.
A higher number of arrangements results in greater entropy. The system with the greatest entropy is that which has the greatest number of arrangements.The system with the greatest entropy is 1 mol of methane gas at 273 K and 40 L. At this state, the gas is present in a larger volume and hence has more microstates, making it more disordered than any other state. Therefore, the greatest entropy is obtained from this system. Next in the rank is 1 mol of helium gas at 273 K and 40 L. Hydrogen gas, 1 mol at 273 K and 40 L, follows helium gas at 273 K and 40 L in rank. 1 mol of helium gas at 273 K and 20 L ranks lower in the list than hydrogen gas. The next state with the lowest entropy is 1/2 mol of helium gas at 273 K and 20 L, followed by 1/2 mol of liquid helium at 100K. The state with the lowest entropy is 1/2 mol of helium gas at 100 K and 20 L. Therefore, the systems in order of decreasing entropy are:
1. 1 mol of methane gas at 273 K and 40 L
2. 1 mol of helium gas at 273 K and 40 L
3. 1 mol of hydrogen gas at 273 K and 40 L
4. 1 mol of helium gas at 273 K and 20 L
5. 1/2 mol of helium gas at 273 K and 20 L
6. 1/2 mol of liquid helium at 100 K
7. 1/2 mol of helium gas at 100 K and 20 L
To know more about entropy visit:
https://brainly.com/question/31953056
#SPJ11
Name the compound and determine the number of moles present. SHOW YOUR WORK.
17.4 g Na
17.4 grams of Sodium
Na= 1 mole.
evidence concerning crystallized and fluid intelligence shows that
Evidence concerning crystallized and fluid intelligence shows the diverse nature of intellectual development.
Research on both crystallized and fluid intelligence suggests that there are different stages of intellectual development. Crystallized intelligence reflects the sum of knowledge, abilities, and experience obtained through education and life events. It includes vocabulary, factual knowledge, and problem-solving abilities that rely on previously learned information.
In contrast, the ability to reason logically, solve unexpected issues, and adapt to changing circumstances is referred to as fluid intelligence. It calls on abilities like pattern recognition, spatial imagery, and abstract reasoning. Studies have revealed that individuals can have varying levels of crystallized and fluid intelligence, and these skills can vary across different periods of life due to factors like education, environmental effects, and cognitive aging.
To know more about fluid intelligence here https://brainly.com/question/28139268
#SPJ4
20 POINTS: Why it's important for science fair participants to not only create an informative and attractive presentation, but also to detail their information, ideas, and research in a science report.
Answer:
To show what they know!
Explanation:
If you're not showing how you did your experiment thoroughly, then nobody will understand what you did! For instance, if you spent 2 weeks studying really hard about how music affects different kinds of animals, and only put down that music affects animals and no showing your work. Then no one will know how much effort and work you put into it! If you put all the minor details into the presentation, then more than likely everyone will know where your coming from!
Hope this helps! Plz mark as brainliest!
calculate the ph when 9.0 ml of 0.150 m koh is mixed with 20.0 ml of 0.300 m hbro (ka = 2.5 × 10⁻⁹)
To calculate the pH when 9.0 mL of 0.150 M KOH is mixed with 20.0 mL of 0.300 M HBrO (Ka = 2.5 × 10⁻⁹), we need to consider the reaction between KOH and HBrO.
The reaction between KOH (potassium hydroxide) and HBrO (hypobromous acid) can be written as follows:
KOH + HBrO → KBrO + H₂O
Initially, we have 9.0 mL of 0.150 M KOH and 20.0 mL of 0.300 M HBrO. To calculate the pH, we need to determine the final concentrations of the species involved in the equilibrium. Let's assume that the reaction goes to completion, meaning all the KOH and HBrO react completely.
First, we need to find the moles of KOH and HBrO.
For KOH:
Moles of KOH = volume (L) × concentration (mol/L)
Moles of KOH = 9.0 mL × (1 L / 1000 mL) × 0.150 mol/L
For HBrO:
Moles of HBrO = volume (L) × concentration (mol/L)
Moles of HBrO = 20.0 mL × (1 L / 1000 mL) × 0.300 mol/L
Next, we need to consider the stoichiometry of the reaction. Since KOH and HBrO react in a 1:1 ratio, the moles of KOH and HBrO will be equal in the balanced equation. Let's assume the moles of KOH and HBrO are both "x".
Now, we can set up an equilibrium expression for the reaction between HBrO and water:
Ka = [KBrO][H₂O] / [HBrO]
Using the given Ka value (2.5 × 10⁻⁹), we can substitute the concentrations:
2.5 × 10⁻⁹ = x² / (0.150 - x)
Since x is much smaller compared to 0.150, we can simplify the expression by assuming that (0.150 - x) ≈ 0.150:
2.5 × 10⁻⁹ ≈ x² / 0.150
Rearranging the equation, we find:
x² ≈ 2.5 × 10⁻⁹ × 0.150
x² ≈ 3.75 × 10⁻¹⁰
Taking the square root of both sides, we get:
x ≈ √(3.75 × 10⁻¹⁰)
x ≈ 6.12 × 10⁻⁶
This value represents the concentration of H₃O⁺ ions. Now, we can calculate the pH using the equation:
pH = -log[H₃O⁺]
Plugging in the value for [H₃O⁺], we find:
pH = -log(6.12 × 10⁻⁶)
pH ≈ 5.21
Therefore, when 9.0 mL of 0.150 M KOH is mixed with 20.0 mL of 0.300 M HBrO, the pH of the resulting solution is approximately 5.21
To learn more about koh - brainly.com/question/31329625
#spj11
Pressure is inversely proportional to which of the following, assuming all other variables are constant? Select the correct answer below O force area O both force and area O neither force or area
According to the statement, Pressure is inversely proportional to the area. Therefore, the correct answer is "Area."
According to the Physics, the pressure exerted by an object is defined as the force applied per unit area of the surface on which the force is applied. Mathematically, it can be written as,P = F / A. Where P is the pressure, F is the force and A is the area on which the force is applied.
From this equation, we can understand that the pressure exerted is inversely proportional to the area on which the force is applied. Therefore, if the area on which the force is applied is increased, then the pressure exerted by the object is decreased and vice versa. In addition, there are several factors that affect the pressure exerted by an object, including the magnitude of force applied, the area of contact, and the angle of application of the force. If all other variables are constant, then the pressure is solely dependent on the force and area of contact. Thus, pressure is inversely proportional to the area.
know more about pressure,
https://brainly.com/question/32277701
#SPJ11
How many molecules are in 3.01 g of H2O
A. 0.167 molecules
B. 54.18 molecules
C. 1.01x10^23 molecules
D. 6.022x10^23
Answer:
Option C
Explanation:
No. of Molecules=(Given Weight/Molar weight)*Avagadro No.
Given weight of H2O=3.01g
Molar weight of H2O=18g
On applying the formula, we get:
No. of Molecules=(3.01/18)*6.023*10²³=1.01*10²³
What is the pH and pOH of a 2.2 x 10^-3 HBr solution?
Answer:
The pH and pOH of a 2.2*10⁻³ HBr solution is 2.66 and 11.34 respectively.
Explanation:
pH - short for hydrogen potential - is a measure of the acidity or alkalinity of a solution. So the pH is a parameter that indicates the concentration of hydrogen ions [H]⁺ that exist in a solution.
The pH is expressed as the negative base 10 logarithm of the hydrogen ion concentration. This is represented by:
pH= - log [H⁺]
pH is measured on a scale of 0 to 14. On this scale, a pH value of 7 is neutral, which means that the substance or solution is neither acidic nor alkaline. A pH value of less than 7 means that it is more acidic, and a pH value of more than 7 means that it is more alkaline.
HBr is a strong acid. Then, in aqueous solution it will be totally dissociated. So the proton concentration is equal to the initial concentration of acid:
[H⁺]= [HBr]= 2.2*10⁻³ M
So:
pH= - log (2.2*10⁻³)
pH= 2.66
On the other hand, pOH is a measure of the concentration of hydroxyl ions in a solution. The sum of pH and pOH equals 14:
pH + pOH= 14
2.66 + pOH= 14
pOH= 14 - 2.66
pOH= 11.34
The pH and pOH of a 2.2*10⁻³ HBr solution is 2.66 and 11.34 respectively.
what is the volume of 9.783 x 1023 atoms of he at 9.25 atm and 512k?
The volume of 9.783 x 10^23 atoms of helium at 9.25 atm and 512 K is approximately 1.97 liters.
To calculate the volume of gas, we can use the ideal gas law equation:
PV = nRT
Where:
P is the pressure (in atmospheres)
V is the volume (in liters)
n is the number of moles
R is the ideal gas constant (0.0821 L·atm/(mol·K))
T is the temperature (in Kelvin)
Given:
Number of atoms of helium (n) = 9.783 x 10^23 atoms
Pressure (P) = 9.25 atm
Temperature (T) = 512 K
First, we need to convert the number of helium atoms to moles. Since 1 mole contains Avogadro's number (6.022 x 10^23) of particles:
Number of moles (n) = Number of atoms / Avogadro's number
Number of moles (n) = 9.783 x 10^23 atoms / 6.022 x 10^23
Number of moles (n) ≈ 1.625 moles
Now, we can rearrange the ideal gas law equation to solve for the volume (V):
V = (nRT) / P
V = (1.625 moles * 0.0821 L·atm/(mol·K) * 512 K) / 9.25 atm
V ≈ 1.97 liters
Therefore, the volume of 9.783 x 10^23 atoms of helium at 9.25 atm and 512 K is approximately 1.97 liters.
To learn more about ideal gas law equation, Visit:
https://brainly.com/question/27870704
#SPJ11
Classify the two amino acids below according to their effective polarity in proteins at pH=7.4. n= Nonpolar up = Uncharged polar cp= Charged polar 1. 2. Classify the two amino acids below according to their effective polarity in proteins at pH=7.4. n= Nonpolar up = Uncharged polar cp= Charged polar 1. 2. Cysteine (Cys or C ) Polarity
At pH = 7.4, Cysteine (Cys or C) can be classified as up = Uncharged polar. Cysteine is a polar amino acid with a sulfhydryl group.
Cysteine is a non-polar amino acid that is made up of an aliphatic side chain containing a sulfhydryl group (–SH). This polar cysteine side chain's polarity enables the formation of disulfide bridges with other cysteine side chains in other proteins and amino acids. The polar amino acid cysteine can form a disulfide bond with another cysteine in an amino acid chain, which gives a high degree of stability to the protein molecules. This amino acid contributes to the stabilization of protein molecules by forming hydrogen bonds and disulfide bonds. The electronegative sulfur atom is responsible for its polar nature. Cysteine can be classified as an uncharged polar amino acid at pH = 7.4. Nonpolar amino acids are hydrophobic (water-repelling) and do not interact well with water. Conversely, charged amino acids are hydrophilic (water-attracting) and interact well with water.
know more about Cysteine
https://brainly.com/question/31674455
#SPJ11
Identify the parts of a wave using the illustration and the function below.
Answer: 1. Crest 2. Trough 3. Wave Length 4. Amplitude
Explanation:
1. Assume that the top of your head has a surface area of 25cm x 25 cm. How many newtons of force push on your head at sea level? 2. If you estimate this area to be 100 in^2 what is the force in pounds
1. Approximately 6333.125 newtons of force push on your head at sea level. Given that the surface area of the top of your head is 25 cm x 25 cm = 625 cm², we can convert it to square meters:
To calculate the force pushing on your head at sea level, we need to use the formula for pressure:
Pressure = Force / Area
Area = 625 cm² × (1 m / 100 cm)^2 = 0.0625 m²
At sea level, the standard atmospheric pressure is approximately 101,325 Pascals (Pa) or 101.325 kilopascals (kPa). Therefore, the force pushing on your head can be calculated by multiplying the pressure by the area:
Force = Pressure × Area
Force = 101,325 Pa × 0.0625 m² = 6333.125 N (to three decimal places)
2.If the area of your head is estimated to be 100 square inches, approximately 1468.276 pounds of force push on your head at sea level.If we estimate the area to be 100 square inches, we can convert it to square meters:
Area = 100 in² × (0.0254 m / 1 in)^2 = 0.064516 m²
Using the same atmospheric pressure, the force pushing on your head can be calculated:
Force = Pressure × Area
Force = 101,325 Pa × 0.064516 m² = 6530.645 N (to three decimal places)
To convert this force into pounds, we can use the conversion factor of 1 N = 0.2248 lb:
Force in pounds = 6530.645 N × 0.2248 lb/N = 1468.276 lb (to three decimal places)
For more such questions on surface area.
https://brainly.com/question/16557677
#SPJ8
Consider the following balanced equation:
2KCIO3(s) → 2KCl(s) + 302(g)
How many moles of O2 will be obtained by decomposing
3.50 moles of KCIO3?
0.530 mole
O 3.00 moles
O 2.30 moles
5.25 moles
5.25 moles
General Formulas and Concepts:Chemistry
Atomic Structure
CompoundsMolesAqueous Solutions
States of matterStoichiometry
Analyzing reactions RxNUsing Dimensional AnalysisExplanation:Step 1: Define
[RxN - Balanced] 2KClO₃ (s) → 2KCl (s) + 3O₂ (g)
[Given] 3.50 mol KClO₃
[Solve] mol O₂
Step 2: Identify Conversions
[RxN] 2 mol KClO₃ (s) → 3 mol O₂ (g)
Step 3: Stoichiometry
[DA] Set up conversion: [tex]\displaystyle 3.50 \ mol \ KClO_3(\frac{3 \ mol \ O_2}{2 \ mol \ KClO_3})[/tex][DA} Multiply [Cancel out units]: [tex]\displaystyle 5.25 \ mol \ O_2[/tex]what simple machine would be best for lifting a couch through a 3rd floor apartment window?
Answer:
Pully
Explanation:
I would think that a pully would be most effective for lifting it Up and into the apartment (at least if you have a suitable spot to put the pully)
WHAT IT IZ BRAINLY anyways I got a question for y’all do you think someone can forget who they rlly loved ? Can you ever forget who you really loved ? I’m tryna prove sum
Answer:
Its a 50% chance of it happeing
Explanation:
Which sodium salt(s) of an amphiprotic ion will produce a basic solution when added to pure water? 1. NaHSO4 (Ka = 1.03 x10^-2; K, = 9.71 x10^-13) 2. NaHCO3 (KA = 4.69 x10^-11, Kg = 2.24 x10^-8) 3. NaHSO3 (Kg = 6.73 x10^-8; Ky = 7.19 x10^-13) a. I and 2
b. l only c. 2 only d. I and 3
e. 3 only
Amphiprotic ion refers to any species that can act as both a proton acceptor and a proton donor. The amphiprotic salt reacts with water and produces either basic or acidic solutions depending on the salt's amphiprotic ion's strength as an acid or base.
The amphiprotic ion of NaHCO3 is bicarbonate ion (HCO3–), and the amphiprotic ion of NaHSO3 is bisulfite ion (HSO3–). The bicarbonate ion is a weak base that reacts with water to form an alkaline solution, while the bisulfite ion is a weak acid that reacts with water to form an acidic solution.NaHSO4 has the strong conjugate base SO4^2-, which will not donate protons to water and produce a basic solution. Therefore, the only sodium salt(s) of an amphiprotic ion that produces a basic solution when added to pure water are NaHCO3 and Na2CO3. Hence, the correct option is (c) 2 only.
To know more about sodium salt(s) visit:
https://brainly.com/question/32094039
#SPJ11
using the equation e=(hcrh)(1n2)=(−2.18×10−18j)(1n2) calculate the energy of an electron in the hydrogen atom when n=2 .
When n=2, the energy of an electron in the hydrogen atom is calculated using the equation e = (-2.18 × 10^-18 J)(1/n^2). Plugging in the values, the energy is found to be -5.45 × 10^-19 J.
The energy of an electron in the hydrogen atom when n=2 can be calculated using the equation e=(hcR_H)(1/n^2), where e represents energy, h is the Planck constant (6.62607015 × 10^-34 J·s), c is the speed of light (2.998 × 10^8 m/s), R_H is the Rydberg constant for hydrogen (1.0973731568539 × 10^7 m^-1), and n is the principal quantum number. Plugging in the values, we get e = (-2.18 × 10^-18 J)(1/n^2). When n=2, the energy can be calculated as e = (-2.18 × 10^-18 J)(1/2^2) = -5.45 × 10^-19 J.
The explanation of the calculation involves substituting the given values into the equation. First, the Planck constant (h) is multiplied by the speed of light (c) and the Rydberg constant for hydrogen (R_H). Then, we multiply the result by 1 divided by the square of the principal quantum number (n^2). In this case, n is given as 2. Thus, we calculate 1/2^2, which is 1/4. Multiplying this value by the previously calculated expression, we find the energy to be -5.45 × 10^-19 J. The negative sign indicates that the energy is bound, meaning the electron is in a lower energy state within the hydrogen atom.
To learn more about energy here brainly.com/question/1932868
#SPJ11
How many atoms are in 0.650 mole of zinc?
NEED TO KNOW ASAP PLEASE