Xenon, Xe, forms a series of compounds with fluorine. The simplest of these compounds is XeF2.- Option 1 The geometry of the molecule is linear.
Xenon (Xe) is a chemical element that is a heavy and incredibly rare gas in Periodic Group 18 (noble gases). It was the first noble gas discovered capable of forming true different chemicals. Xenon, which is more than 4.5 times heavier than air, is colourless, flavourless, and tasteless. A molecule is a group of two or more atoms held together by covalent bond; depending on context, the word may or may not include ions that meet this criterion.
To learn more about series of compounds here:
https://brainly.com/question/17152360
#SPJ4
how many ml of 2.50%(m/v) salt solution would contain 1.80 g of salt? note: answer to 2 significant figures only and no units!
Answer:
180 ml
Explanation:
Using general tendencies and the chart given in the introduction, predict the most likely mode of decay of each of the following radioactive isotopes. Drag the appropriate items to their respective bins.
A neutron that transforms into a proton is the mode of decay that a neutron-rich nucleus will experience most frequently. Every radioactive isotope with a neutron content less than 83 decays by an electron.
How can the decay modes of an isotope be predicted?Beta decay will occur in isotopes with a N/Z ratio greater than 1, which translates to an overabundance of neutrons. Stable nuclei for elements with increased atomic numbers can be found at N/Z ratios more than 1 and as high as 1.5.
What are the alpha, beta, and gamma kinds of radioactive decay?The nucleus loses two protons during alpha decay. The nucleus either acquires or loses a proton during beta decay. No change occurs in gamma decay the atom does not change into a new element because of an increase in proton number.
To know more about radioactive isotope visit:-
https://brainly.com/question/28039996
#SPJ4
In a covalent bond, two atoms are held together by the attraction between
Answer:
In a covalent bond, two atoms are held together by the attraction between each atom and the shared electronsthe nuclei of the two atomsthe valence electrons of the two atoms. The number of covalent bonds that an atom can form depends on the number of energy levelsprotons and neutronsvalence electrons in the atom.
Explanation:
Which statements correctly describe and provide evidence for the double replacement reaction?
The statements which correctly describe and provide evidence for the double replacement reaction are:
reactants rearrange to form new productsmetal replaces a nonmetalthe cations trade placesThe correct options are A, D, and E.
What are double replacement reactions?Double replacement reactions are reactions where there is an exchange of radicals between two compounds when their solution is mixed together.
In double replacement reactions, a precipitate is always formed.
Also, the metallic ions trade places such that the cation of one compound is exchanged with the cation of the other compound.
A typical double replacement reaction is illustrated below:
AB + CD ---> AD + CB
where;
A and C are cations
B and D are anions.
Learn more about double replacement reactions at: https://brainly.com/question/23918356
#SPJ1
Complete question:
Which statements correctly describe and provide evidence for the double replacement reaction?
reactants rearrange to form new productsthere is a single element formeda metal replaces a nonmetala precipitate is formedthe cations trade placesthe addition of hbr to some alkenes gives a mixture of the expected alkyl bromide and an isomer formed by rearrangement outline the mechanism of formation and strcutres of products form the reaction of hbr with
Alkyl halides are produced by adding HBr to alkenes.The pi bond of the alkene functions as a weak nucleophile & reacts with electrophilic proton of HBr, which is a helpful way to conceptualize the reaction.
How intermediates are involved in the bromination or alkene and what is the reaction mechanism?A 3-membered ring intermediate is produced as a result of the alkene acting as a nucleophile in this reaction and attacking the electrophilic bromine.The carbon that is most capable of stabilizing positive charge then is attacked from of the back side [akin to a backside attack inside the SN2 Mechanism] to produce the trans product.
Which one of the following statements accurately describes how an alkene and HBr react when peroxide is present?The free-radical mechanism governs the addition reaction with HBr to an asymmetrical alkene inside the presence of peroxide.Here, an alkene interacts with a bromine radical to make an anti-Markovnikov product.
To know more about hbr visit:
https://brainly.com/question/2194001
#SPJ4
The energy distribution profile (Curve C) for the Y2 molecules is shown in the graph below forthe reaction X+yz_XY2 when it is done under certain experimental conditions Line A represents the most probable energy of the Y2 molecules; and Line B represents the activation energy Which of the following changes should be made to the graph to explain the increase in the rata of the reaction if tho only change in experimental conditions Is tho addltion of a catalyst? Linc A Llne B 1 Curve C Moladul nr Fnomy haCurve C will broaden and Line B will move to the left; because have an energy greater than the minimum more Y2 molecules wlll energy barrier energy needed to overcome the activation ninimeB will move to the left because a larger fraction of minimum energy to overcome the activatiog the Y2 molecules will have the C Curve C and Line A will move to the energy barrier: molecules will Increase; right because the average energy of the Y2 Dilline ^ will move to the right because will increase the most probable energy of the Y2 molecules
Because a greater proportion of the Y2Y2 molecules will have the required energy to break through the activation energy barrier, line B will shift to the left.
What is the name for molecules?Any group of atoms joined together by chemical bonds is referred to as a molecule. A molecule is created from any two atoms together. A compound is an organic molecule composed of atoms from several elements. Not all molecules are compounds, yet all molecules are compounds.
Why isn't salt a molecule?A substance like table salt (NaCl), which is formed of two different types of elements (sodium and chlorine), is a compound, but it is not a molecule since the connection that binds NaCl together is an ionic bond.
To know more about Molecule visit:
https://brainly.com/question/19922822
#SPJ4
The energy required to run the Calvin cycle reactions of photosynthesis comes from which two substances produced during the light-dependent reactions?
O ATP and NADPH
O ADP and PO4
O H+ and PO2
O O2 and CO2
The substances produced during the light-dependent reactions to run the Calvin cycle reactions of photosynthesis are ATP and NADPH.
Thus, the correct answer is A.
What is the Calvin cycle?The Cаlvin cycle is а cycle thаt tаkes plаce in the stromа of the chloroplаst. The primаry enzyme required for the cycle to occur is the RUBISCO or ribulose-1,5-bisphosphаte cаrboxylаse oxygenаse which is found in the stromа. It is the cycle where the ultimаte plаnt food glucose is synthesized.
The sources of energy in the Cаlvin cycle аre Аdenosine triphosphаte (АTP) аnd Nicotinаmide аdenine dinucleotide phosphаte hydrogen (NАDPH) which аre formed during the light reаction in the thylаkoid membrаne.
For more information about the Calvin cycle refer to the link:
https://brainly.com/question/3199721
#SPJ4
Use your Counting Atoms Notes, Ionic and Covalent Bonding Notes, and a Periodic
Table to help you on this assignment. You may use a calculator if you need it.
Identify the coefficients and subscripts in the following formulas.
1) 3MgCl2 coefficient:
Subscript for Mg:
Subscript for Cl:
2) 4K2CO3 coefficient:
Subscript for K:
Subscript for C:
Subscript for O:
3) NaC2H3O2 coefficient:
Subscript for Na:
Subscript for C:
Subscript for H:
Subscript for
The number of mole of atoms of an element in the given compounds is written as subscripts as shown below:
1) 3 MgCl₂
coefficient: 3Subscript for Mg: 1Subscript for Cl: 22) 4 K₂CO₃:
coefficient: 4Subscript for K: 2Subscript for C: 1Subscript for O: 33) NaC₂H₃O₂
coefficient: 1Subscript for Na: 1Subscript for C: 2Subscript for H: 3Subscript for O: 2What are chemical formulas?Chemical formulas are formulas that are used to represent compounds using the symbol of the elements found in the compounds.
The moles of atoms of each element found in the compound are written as subscripts in front of the element.
The moles of the compound present are written as coefficients in front of the chemical formula of the compound.
Learn more about chemical formulas at: https://brainly.com/question/11574373
#SPJ1
I need help explain why the groundwater heater system will heat up the school more then the water heater, please try to make the explaining as long as possible.
Given the fact that it consumes more water than the other system, the groundwater heater will warm the building more efficiently than the hot water system.
Explain what groundwater is.Water that is found underground in saturated regions under the surface of the earth is known as groundwater. The water table is the term for the saturated zone's top surface. Contrary to common perception, subterranean rivers are not created by groundwater.
How is ground water created?Fresh water that soaks into in the soil from precipitation or melting snow and ice is called groundwater. It is kept in the microscopic crevices (pores) underlying rocks and dirt. Nearly 95% of the government's fresh water supplies come from groundwater.
To know more about Groundwater visit:
https://brainly.com/question/25936986
#SPJ1
This element forms a red solution when it complexes with thiocyanate, and although it is not aluminum, a chloride of this element catalyzes a Friedel-Crafts alkylation. The oxide of this element is used industrially to produce ammonia in the Haber-Bosch process, and this element exists in a solid solution with carbon in its gamma variety austenite. This element is derived from the ore hematite, and its brass-colored pyrite is commonly known as "fool's gold". For 10 points, name this transition metal with chemical symbol Fe.
Based on the cues Fe is nothing but ferric which is iron.An very crimson solution containing the ion [Fe (SCN) (H 2 O) 5] results when thiocyanate ions, SCN -, are added to a solution containing iron (III) ions, such as sodium, potassium, or ammonium thiocyanate solution. 2+
In the electrophilic aromatic substitution reaction known as "Friedel-Crafts alkylation," an alkyl substituent is attached to an aromatic ring (benzene). Lewis acids, such as AlCl3 and FeCl3, catalyze these reactions and aid in the production of carbocations from alkyl halides.
The solid phase of the Haber-Bosch Process is heterogeneous catalysis. Both hydrogen and nitrogen, the reactants, are gases. They are both poured into a vessel at a high temperature and extreme pressure in the presence of iron oxide.
To know more about Haber-Bosch Process visit
https://brainly.com/question/26667299
#SPJ4
how to find the average atomic mass from a data table
The average atomic mass of the element, given the data in the table is 39.095 amu
How do I determine the average atomic mass?From isotopy, we understood that the average atomic mass of elements existing in various isotopic form can be determined by the formula:
Average atomic mass = [(Mass of 1st × 1st%) / 100] + [(Mass of 2nd × 2nd%) / 100] + [(Mass of 3rd × 3rd%) / 100]
Where
1st, 2nd and 3rd are the isotopes of the element1st%, 2nd% and 3rd% are the abundance of each isotopesNow, we shall determine the average atomic mass of the element in the table as follow:
Mass of 1st = 38.96Abundance of 1st (1st%) = 93.26%Mass of 2nd = 39.96Abundance of 2nd (2nd%) = 0.01%Mass of 3rd = 40.96Abundance of 3rd (3rd%) = 6.73%Average atomic mass =?Average atomic mass = [(Mass of 1st × 1st%) / 100] + [(Mass of 2nd × 2nd%) / 100] + [(Mass of 3rd × 3rd%) / 100]
Average atomic mass = [(38.96 × 93.26) / 100] + [(39.96 × 0.01) / 100] + [(40.96 × 6.73) / 100]
Average atomic mass = 36.334 + 0.004 + 2.757
Average atomic mass = 39.095 amu
Thhus, the average atomic mass is 39.095 amu
Learn more about average atomic mass:
https://brainly.com/question/24185848
#SPJ1
4. Electrolysis (splitting) of water.
H2O →
Electrolysis of water produces hydrogen and oxygen gases as it's products.
What is electrolysis?
Electrolysis is defined as a process that makes of an electric current to drive a non-spontaneous chemical reaction. It is an important process for purification and extraction of metals from their ores.It makes use of an electrolytic cell in which two electrodes are present.
The two electrodes are the cathode and anode where reduction and oxidation reactions take place respectively.In the electrolysis of water hydrogen is collected at cathode and oxygen is collected at anode.
Learn more about electrolysis,here:
https://brainly.com/question/12054569
#SPJ1
Use the information in the table below to respond to the statements and questions that follow. Your answers should be in terms of principles of molecular structure and intermolecular forces. a) Draw the complete Lewis electron-dot diagram for ethyne in the appropriate cell in the table below. (1) Compound Ethanethiol Formula CH3CH2SH Ethane CH3CH3 Lewis Electron Dot Diagram HH H:C:C:S:H HH HH H:C:C:H HH HH H:C:C:0:H HH Ethanol CH3CH2OH Ethene CzH b) Which of the four molecules contains the shortest carbon-to-carbon bond? Explain. [2] c) Explain how the structure of the molecules affects the energy that is required to boil ethanol. Consider the statement " As ethanol boils energy goes into breaking C-C bonds, C-H bonds, C-o bonds and O-H bonds." Is the statement true or false? Justify your answer. [2] d) Ethanol is completely soluble in water, whereas ethanethiol has limited (significantly less) solubility in water. Account for the difference in solubilities between the two compounds in terms of intermolecular forces. [2]
The complete Lewis electron-dot diagram for ethyne is shown in the attached diagram below:
What is the lewis electron dot diagram?A lewis electron dot structure can be utilized to represent the number of bonds, the lone pairs left in the atoms, and the bonding atoms in the molecule.
Solid lines are used to represent the bonds between atoms that are directly bonded to one another and excess electrons are denoted as dot pairs and are represented next to the atoms.
As the valence electrons of each carbon atom are equal to 4 from the electronic configuration of the carbon atom. First, the total number of valence electrons in a molecule is 4 + 1 + 1 + 4 = 10.
As each carbon atom needs only 4 electrons to complete its octet. As the octet completes, the rest of the electrons are assigned as the lone pairs of atoms. But there are no lone pairs in the molecule of the ethyne.
Learn more about the lewis dot diagram, here:
brainly.com/question/14091821
#SPJ4
for the tlc experiment: compounds that have the affinity for the stationary phase and affinity for the mobile phase will travel the furthest.
According to the tlc experiment, chemicals that have a low affinity for the stationary phase and a high affinity for the mobile phase will go the farthest.
A compound example is defined.A material that has been chemically linked by the joining of two or more distinct components. Sea salt (NaCl), which itself is derived first from elements sodium and chloride, as water (H2O), which is created from the components hydrogen and oxygen are two such examples of compounds.
Give an explanation of compounds.Any material composed of two or more separate chemical elements mixed together in a certain proportion is called a compound. The interaction of the elements creates chemical connections that are hard to break. Shared or exchanged electrons between atoms cause the formation of these bonds.
To know more about Compounds visit:
https://brainly.com/question/13516179
#SPJ4
Below, energy is plotted as a function of reaction progress for a catalyzed and uncatalyzed chemical reaction. Assign the terms to their corresponding features in the figure. Which curve in the plot represents the catalyzed reaction? O the blue (top) curve O the green (bottom) curve
The green bottom curve represents the catalysed reaction.
It is common practise to use catalysed reactions to quicken a particular chemistry's progress. The catalyst's main function is to offer the reaction a different, lower-energy pathway.
In a catalysed reaction, the reactant molecules readily pass the activation energy barrier and produce products. As a result, the activation energy of an uncatalyzed reaction is higher than the activation energy of a catalysed reaction.
For catalyzed reaction activation energy lower than uncatalyzed reaction. The complexity of the collisions necessary to reach a transition state means that without the catalyst, the Ce4+ ions and Tl+ ions must directly react in a termolecular reaction, which will be substantially slower.
To learn more about uncatalysed chemical reaction
https://brainly.com/question/13059657
#SPJ4
Read the temperatures shown to the nearest 0.5°C
Answer: 37.0 and 42.5
The temperatures shown to the nearest 0.5°C is 42.5°C.
What is temperature?Temperature is the measurement of the coldness or hotness of a substances or object or place.The instrument used to measure temperature is termed as Thermometer.°C (Celsius):
°C (Celsius) is the measurement of Temperature on the Celsius scale .This is one of the S.I systems of temp. measurement.The other scale used to measure Temperature is Kelvin scale.The units of °C (Celsius) is marked on the thermometer as shown in the image.0°C (Celsius) is equal to 273.15 KHence, as per the given image the temperatures shown to the nearest 0.5°C is 42.5°C.
To know more about Temperature visit
https://brainly.com/question/22374191
#SPJ1
∆Hrxn for a particular chemical reaction is –85 kJ. Which of the following is true?
A. The reaction releases energy as it occurs, and the energy level of the products is less than the energy level of the reactants.
B. The reaction absorbs energy as it occurs, and the energy level of the products is less than the energy level of the reactants.
C. The reaction releases energy as it occurs, and the energy level of the products is greater than the energy level of the reactants.
D. The reaction absorbs energy as it occurs, and the energy level of the products is greater than the energy level of the reactants.
The energy level of the products is lower than the energy level of the reactants, and energy is released throughout the reaction. (Option A)
What is meant by an exothermic reaction?Chemical processes known as exothermic reactions generate heat. When heat is transferred from the system to its surroundings, as described, the heat flow q is considered negative. Therefore, the H of reaction is negative for exothermic reaction processes.
Why is exothermic reaction negative?Therefore, a reaction is exothermic and its enthalpy will be negative if it releases more energy than it takes in. Consider this as a certain quantity of heat evaporating from (or being removed from) the reaction. Endothermic reactions have positive enthalpies because they absorb or use more energy than they produce.
To know more about exothermic reaction, visit:
brainly.com/question/14711757
#SPJ1
Compound A decomposed to form compound B and c I. A first order reaction at 250c° the rate constants for the reaction is 0.45,what is the half life of compound A ?
The half-life of a reaction is the time it takes for the concentration of a reactant to decrease to half its initial value. In a first-order reaction, the rate of the reaction is directly proportional to the concentration of the reactant. This means that the rate of the reaction depends on the concentration of compound A.
To calculate the half-life of compound A, you can use the equation:
half-life = (ln(2)) / k
where k is the rate constant for the reaction.
Plugging in the values given in the question, we get:
half-life = (ln(2)) / 0.45
This simplifies to:
half-life = 1.44 / 0.45
Which gives us a final result of:
half-life = 3.2 hours
So the half-life of compound A at 250°C is approximately 3.2 hours.
Learn more about Half-life reactions here: https://brainly.com/question/14228544
How many photons are contained in a flash of green light (525 nm) that
contains 189 kJ of total energy?
The flash of green light 525 nm that contains 189kJ of total energy is 2.39 ×10^29 photons.
The formula below gives the energy EE of a single photon of wavelength lambda.
E = hc/λ, where c is the speed of light and h is the plank constant, with a value of 6.62607015 ×10^34.
To determine the overall number of photons n in a green light flash (525 mm) with a total energy of 189 kJ.
We'll apply the following formula.
n= Et/ E
When we enter the given values into the formula, we see that n= Et/E.
= [tex]\frac{189 *10^3}{6.62607015 *10^−34 × 3*10^8}/ 525 *10^-3[/tex]
Therefore, there are 2.39 ×10^29 photons in a green light with 189 kJ of energy.
For more information on photons kindly visit to
https://brainly.com/question/20912241
#SPJ1
To make oxygen free the copper is heated in an atmosphere of hydrogen.
Explain how this will remove the oxygen.
Answer:
When copper is heated in an atmosphere of hydrogen, the hydrogen gas can react with the oxygen present on the surface of the copper to form water. This reaction is known as reduction. The equation for this reaction is:
2H2 + O2 → 2H2O
In this reaction, the oxygen atoms in the copper are reduced (i.e., they gain electrons) and the hydrogen atoms are oxidized (i.e., they lose electrons). As a result, the oxygen is removed from the surface of the copper, leaving it oxygen-free.
This process is often used to purify copper and remove impurities, such as oxygen, that may be present on the surface of the metal. It is also used to produce high-purity copper for use in electrical and electronic applications, where the presence of oxygen can affect the conductivity of the metal.
A certain solid substance that is hard, has a high melting point; and is nonconducting unless melted is most likely to be A)AS B) Cr C) k DJ NaCl E)CO
Explanation:
the most likely answer here is cobalt
Convert 6.75 cm to mm
Answer: 67.5
Explanation:
Brainliest pls
Because pure H2 is a hazardous substance, safer and more cost effective techniques to store it as a solid for shipping purposes have been developed. One such method is the reaction represented above, which occurs at 200 degrees Celsius. Which of the following happens to H atoms in the forward reaction?
In the given reaction, hydrogen undergoes both oxidation and reduction. Hydrogen first oxidises from 0 to +1 oxidation state and then reduced to -1 in LiH.
What is oxidation?Oxidation is the process by which element combines with oxygen or loses electron forming its higher oxidation state. Whereas reduction is the process of combining with hydrogen or gaining electron to form the lower oxidation state of the element.
If an element undergoes both oxidation and reduction in the same reaction, it is called as disproportionation reaction. In the given reaction hydrogen undergoes disproportionation reaction.
In the molecular state H₂ is in 0 oxidation state and when it turns to LiNH₂, it oxidises to + 1 oxidation state and then reduces to -1 in LiH. Hence, option C is correct.
To find more on oxidation, refer here:
https://brainly.com/question/9496279
#SPJ1
Your question is incomplete. But your complete question probably was:
Because pure H2 is a hazardous substance, safer and more cost effective techniques to store it as a solid for shipping purposes have been developed. One such method is the reaction represented above, which occurs at 200 degrees Celsius. Which of the following happens to H atoms in the forward reaction?
Li₃N(s) + 2 H₂(g) ←→ LiNH₂(s) + 2 LiH(s)
(A) H atoms are oxidized only.
(B) H atoms are reduced only.
(C) H atoms are both oxidized and reduced.
(D) H atoms are neither oxidized nor reduced.
Calculatethe rms speed of an oxygen molecule at 0∘C anddetermine how many times per second it would move back and forth across a 5.0-m-long room on average, assuming it made no collisions with other molecules.
The RMS speed of an oxygen molecule at 0° temperature is 14.5971m/sec and it move 0.342 times per second back and forth.
We know that RMS speed of molecule is given by the formula=√(3RT /M)
where R is the gas constant,
T is the temperature of molecule
and M is the molecular mass of the molecule.
Now,for oxygen molecule,we know that oxygen have =32g/mol,and temperature in kelvin is C+273=0+273=273K.
So,on putting the value in above formula
=>RMS speed=√(3 × 8.314× 273) / 32
=>RMS speed=√6809.166/32
=>RMS speed=√212.786
=>RMS speed=14.5871m/sec
Now,we need to apply the distance-speed formula for calculating the time.
We have distance as 5m,speed as 14.5871m/sec and t=?;
5=14.5871 × t
=>t=5/14.5871
=>t=0.342sec
Hence, RMS speed is 14.5871m/sec and oxygen molecule will travel back and froth 0.342 times in 1 sec .
To know more about RMS speed, visit here:
https://brainly.com/question/15514391
#SPJ4
Fill in the necessary reagents or products, from A through G, to complete each of the following reactions in the formation of 1-phenyl-2-butanol. A through G are single reagents or products, excluding any acid workup. CH2N2 NaBH4 followed by H30+ DIBAL-H -78 °C OH
The effective reducer sodium borohydride. It is extremely efficient at converting aldehydes and ketones into alcohols, although not having the same potency as 1-phenyl-2-butanol.
Isomerism in geometry present in 1 phenyl 2 butene?
Due to the distinct substitutions made to the two double-bonded carbons in 1-phenyl-2-butene, it can display geometric isomerism.
What does 2-butanol's functional group look like?The group of chemical substances referred to as secondary alcohols includes 2-butanol, also known as 2-butyl alcohol or 2-hydroxybutane. The typical structure of secondary alcohols is HOC(R)(R') (R,R'=alkyl, aryl), and they are substances that contain a secondary alcohol functional group. A tasteless substance, 2-butanol has no smell.
To know more about 1-phenyl-2-butanol visit :-
https://brainly.com/question/15315466
#SPJ4
Which of the following steps can be used to identify a single replacement reaction? a Check whether the products are salt and water. b Check whether the reactants are an acid and a base. c Check if the ions of two compounds exchange places. d Check if one element replaces another element in a compound.
When one element in the compound has been swapped out for another, the single replacement reaction can be recognized. Option C is right as a result.
The replacement reaction is the process in which a compound is formed after a highly reactive element has replaced a low reactive element.
The reaction is listed as follows:
AX + Y X + AY
The highly reactive X causes Y to replace Y in the complex, creating the compound AX.
One element in a compound is replaced by another in a chemical reaction known as a single-displacement reaction, sometimes referred to as a single replacement reaction or exchange reaction.
For more information on single replacement reaction kindly visit to
https://brainly.com/question/29224660
#SPJ1
the cloth shroud from around a mummy is found to have a 14c14c activity of 10.0 disintegrations per minute per gram of carbon as compared with living organisms that undergo 16.3 disintegrations per minute per gram of carbon. part a from the half-life for 14c14c decay, 5715 yryr , calculate the age of the shroud.
Shroud's vintage t=4.28×10 3yr If the cloth veil from a mummy has a 14C14C energy of 10.0 disintegrations for minute per kg of carbon in comparison to live things that experience
What exactly is state disintegration?When a government is no longer in effective control, the third component necessary for a state to exist, state structures appear to fall apart. Diverse regions of the nation's borders may be affected by this at varying intensities.
t = k1 ln N 0N t t = - dfrac 1 1.21 times 10-4 text year 1 ln dfrac 9.7 16.3
t=1.21104 yr1 1 ln 16.39.7 t = 4.28times 103 textyr
t=4.28×10 3 yr
To know more about disintegrated visit:
https://brainly.com/question/3019200
#SPJ4
What is the frequency of a photon of light (in Hz) that has an energy of 3.75 × 10-21 J?
5.66 × 1012 Hz
3.75 × 10-21 Hz
2.48 × 10-54 Hz
1.77 × 10-13 Hz
The energy of a photon is hv. Where h is plank's constant and v be the frequency. The frequency of a photon with an energy of 3.75 × 10⁻²¹ J is 5.66 × 10¹² Hz.
What is frequency?Frequency of a wave is the number of wave cycles per unit time. It is the inverse of the time period. Thus, has a unit of s⁻¹ which is equivalent to Hz.
Frequency of a wave is directly proportional to the energy.
The energy of a photon = hv
h is the planck constant = 6.62 × 10⁻34 J.s
Given the energy of a photon = 3.75 × 10⁻²¹ J
Thus, frequency = energy/planck's constant
= 3.75 × 10⁻²¹ J/ 6.62 × 10⁻34 J.s
= 5.66 × 10¹² Hz.
Therefore, the frequency of the photon is 5.66 × 10¹² Hz.
To find more on frequency, refer here:
https://brainly.com/question/25867078
#SPJ1
Oxygen has two common molecular anions: peroxide (O22) and superoxide (02). Use an MO energy level diagram to determine the following. 18. The bond order for 02. Enter as an integer or decimal
19.The bond order for O2. Enter as an integer or decimal. 20. The bond order for O22. Enter an integer or decimal. 21. Which of these are paramagnetic? O O2
O O2-
O 022-
22. Which has the longest bond length? O O2
O O2-
O O22-
O₂ and O₂⁻ are paramagnetic while O₂²⁻ is diamagnetic. An entity is paramagnetic if it has unpaired electrons in its molecules. The chemical is diamagnetic if every electron is coupled.
A paramagnetic is what?Unpaired electrons with magnetic dipole moments are paramagnetic as a result. According to QED, an electron's magnetic moment results from its spins and orbiting motion, granting it angular velocity in the microscopic sense.
Iron is paramagnetic for what reason?Compounds that are magnetic are drawn towards the poles of magnets because they contain 1 or more lone pair of electrons. Due to the requirement of electronegativity in their orbitals, both the element iron as iron (III) are paramagnetic. The majority of the time, iron (II) also occupies the same position.
To know more about paramagnetic visit:
https://brainly.com/question/14356000
#SPJ4
All of the following statements are true except
A. The n = 2 energy level has no d orbitals.
B. The 2p orbital set can hold a maximum of 6 electrons.
C. The s orbital has a spherical shape.
D. There are five d orbitals in a d sublevel.
E. The third main energy level can have electrons in an f subshell.
Among all the statements, statement A is incorrect that is the n = 2 energy level has no d orbitals.
How to define atomic orbitals and quantum numbers?The angular momentum quantum number (l)- The orbital form is determined by this integer with the values l = 0, 1, 2,..., n - 1.
Because of this, an orbital with n = 1 can only have one value of l, l = 0, while an orbital with n = 2 can have both l = 0 and l = 1. The orbital's overall dimensions and energy are determined by the primary quantum number. The orbital's form is determined by the l value. Subshells are formed by orbitals with the same value of l. Additionally, the angular momentum of an electron in this orbital increases with the angular momentum quantum number.
The d orbitals are the orbitals with l = 2. Then, the value of l is -
I = n-1 = 2 -1 = 1
The p orbitals are represented by the value l = 1 and not the d orbitals.
Thus, statement A in incorrect.
Know more about atomic orbitals at:
https://brainly.com/question/28240666
#SPJ1