Answer: The equation Y-5 = -7/3(X-3) in standard form is:
3Y - 15 = -7X + 21
Step-by-step explanation:
For the function f(x) shown below, find the definite integral ∫₀⁶ f?(x)dx
========================================================
Explanation:
The left-most rectangle spans from x = 0 to x = 2. It has base 2 and height 2, which means it has an area of 2*2 = 4 square units. Let A = 4 since we'll use it later.
The middle rectangle goes from x = 2 to x = 4. It has base 2 and height 3 (because it goes from y = 0 to y = -3). The area is B = 2*3 = 6
Draw a vertical line through 6 on the x axis. This forms the final rectangle we need. It has base 2 (because it goes from x = 4 to x = 6) and height 5. The area is C = 2*5 = 10.
The small sliver to the right of x = 6 is ignored completely.
--------------------
Summary so far:
A = 4B = 6C = 10Those represent the areas of the rectangles from left to right. We ignore the portion to the right of x = 6.
Since rectangle B is below the x axis, we treat this as a negative area, or we subtract off this area. The positive areas of rectangles A and C are added.
So,
A-B+C = 4-6+10 = 8 is the final answer
We can write [tex]\displaystyle \int_{0}^{6}f(\text{x})d\text{x} = \boldsymbol{8}[/tex]
The owner-manager of Good Guys Enterprises obtains utility from income (profit) and from having the firm behave in a socially conscious manner, such as making charitable contributions or civic expenditures. Can you set up the problem and derive the optimization conditions if the owner-manager wishes to obtain a specific level of utility at the lowest possible cost? Do these conditions differ from the utility maximizing conditions?
Answer:
Step-by-step explanation:
Certainly! To set up the problem, we can consider the owner-manager's utility as a function of two variables: income (profit) and charitable contributions or civic expenditures. Let's call these variables x and y, respectively.
The owner-manager utility is given by the function U(x,y), where x is the income (profit) and y is the charitable contributions or civic expenditures.
The cost of obtaining this utility is given by the function C(x,y), where x is the income (profit) and y is the charitable contributions or civic expenditures.
To find the lowest possible cost at which the owner-manager can obtain a specific level of utility, we can use the following optimization conditions:
The cost function C(x,y) should be minimized subject to the constraint U(x,y) = k, where k is the specific level of utility that the owner-manager wishes to achieve.
The first-order necessary conditions for a minimum are:
∂C/∂x = λ ∂U/∂x
∂C/∂y = λ ∂U/∂y
where λ is a Lagrange multiplier.
These conditions are known as the Karush-Kuhn-Tucker (KKT) conditions.
These optimization conditions differ from the utility-maximizing conditions in that we are minimizing the cost function instead of maximizing the utility function. In addition, we have the constraint U(x,y) = k, which means that we are trying to achieve a specific level of utility rather than trying to maximize it.
Which of the following functions describes the graph of g(x)? (5 points)
Rational function with one piece decreasing from the left asymptotic to the line y equals 2 and going through a hole at the point negative 2 comma eight-fifths and going down through the point 2 comma 0 asymptotic to the line x equals 3 and another piece decreasing from the left asymptotic to the line x equals 3 and going through the point 5 comma 3 going up to the right asymptotic to the line y equals 2
g of x is equal to the quantity 2 x squared minus 8 end quantity over the quantity x squared minus x minus 6 end quantity
g of x is equal to the quantity 2 x squared minus 8 end quantity over the quantity x squared plus x minus 6 end quantity
g of x is equal to the quantity 2 x squared minus 8 end quantity over the quantity x squared plus 5 x plus 6 end quantity
g of x is equal to the quantity 2 x squared minus 8 end quantity over the quantity x squared minus 5 x plus 6 end quantity
The equation of rational function is (c) g(x) = (2x + 4)/(x + 1).
What is a function?Each element of X receives exactly one element of Y when a function from one set to the other is used. The sets X and Y are collectively referred to as the function's domain and codomain, respectively.
An expression, rule, or law that defines a relationship between one variable (the independent variable) and another variable (the dependent variable).
Given that,
The function g(x).
The graph of a function never touches the x = 1 line
At x = -1 there will be a vertical asymptote.
At x = -2 there will be a horizontal asymptote.
The equation of the function g(x) will be:
g(x) = (2x + 4)/(x + 1)
The equation of rational function is g(x) = (2x + 4)/(x + 1)
Therefore, g(x) = (2x + 4)/(x + 1) is correct.
Learn more about a function on https://brainly.com/question/12431044
#SPJ1
What do the properties of polynomial addition mean? Complete each statement.
The closure property states that the sum of two polynomials is a
The commutative property states that changing the order of two or more terms
~ the value of the sum.
The associative property states that the way in which two or more terms are grouped in a sum
the value.
The Complete statement are:
The closure property states that the sum of two polynomials is a polynomial.The commutative property states that changing the order of two or more terms does not change the value of the sum.The associative property states that the way in which two or more terms are grouped in a sum does not change the value of the sum.What is the properties of polynomial addition about?The properties of polynomial addition include closure, commutativity, and associativity.
These properties of polynomial addition make it easy to perform arithmetic operations with polynomials because they have predictable results and the order in which the polynomials are grouped or ordered does not change the final result.
Therefore, In simple terms, closure property ensures that the sum of two polynomials is also a polynomial, commutative property ensures that the order of the polynomials does not change the sum and the associative property ensures that the grouping of the polynomials does not change the sum.
Learn more about closure property from
https://brainly.com/question/19340450
#SPJ1
Answer:
Step-by-step explanation:
Match each modification to its effect on an ecosystem.
Many desert regions in the West were transformed
into lush urban areas and farmlands.
Water bodies in the Owens Valley and its
surrounding areas began to dry up.
Runoff containing disease-carrying organisms
contaminated soil and caused water pollution.
construction of the Los Angeles aqueduct
arrowRight
construction of large highways
arrowRight
damming of the Colorado River
The modifications and their effects on the ecosystem include:
construction of the Los Angeles aqueduct - Many desert regions in the West were transformed into lush urban areas and farmlands.construction of large highways - Runoff containing disease-carrying organismsdamming of the Colorado River - Water bodies in the Owens Valley and its surrounding areas began to dry up.What were the effects of some man made feats in the west ?With the construction of the Los Angeles aqueduct, water was transported to the west such that many desert regions there became lush urban areas and farmlands.
Large high ways and the damming of the Colorado River did not have such a good impact however, as they both led to runoff and to water bodies in the Owen valley drying up.
Find out more on aqueducts at https://brainly.com/question/22124133
#SPJ1
Find the length of the line segment shown below.
The line segment AB is d = [tex]\sqrt{106}[/tex] in length if (-5, 4) and (B), and A = (-5 , 0) . A line segment is hence a section or component of a line with two endpoints.
what is line segment ?A line segment in geometry is bordered by two separate points on a line. A line segment has two fixed or distinct endpoints, whereas a line has no endpoints and can stretch in both directions indefinitely. A line segment is hence a section or component of a line with two endpoints. A line segment, unlike a line, has a set length. Measuring the length of a line segment can be done using either metric measurements, such as millimeters or centimeters, or conventional measurements, such as feet or inches.
given
d = [tex]\sqrt{(x2 - x1)^{2} + (y2 - y1)^{2} }[/tex]
(5 )2 + ( 9 ) 2 = d
d = 25 + 81
d = [tex]\sqrt{106}[/tex]
The line segment AB is d = [tex]\sqrt{106}[/tex] in length if (-5, 4) and (B), and A = (-5 , 0)
To know more about line segment visit :-
https://brainly.com/question/30072605
#SPJ1
Identify the slope and y-intercept of the line given by the equation: y = 1/3x - 2
Answer:
this is in the form of slope intercept. y = mx + b
m is the slope
and b is the y intercept
meaning that -2 is the y intercept
and 1/3 is the slope
(meaning on a graph you go up one, and over 3)
Step-by-step explanation:
You buy 4 pounds of steak at Store A for $25.50. Your friend buys 6 pounds
of steak at Store B for $40.25. Which store is cheaper?
O No answer text provided.
O They're the same
O Store A
O Store B
Question 3
Answer: To determine which store has the cheaper steak, you need to compare the price per pound of steak at each store. To do this, divide the total price by the number of pounds of steak at each store.
At Store A, the price per pound of steak is $6.38 because 25.50 / 4 = <<25.50/4=6.375>>6.375.
At Store B, the price per pound of steak is $6.71 because 40.25 / 6 = <<40.25/6=6.708>>6.708.
Therefore, Store A is cheaper because it has a lower price per pound of steak. The correct answer is Store A.
Step-by-step explanation:
Which sets of values belong to the domain and range of a relation?
output values
Domain
values for the independent variable
input values
values for the dependent variable
Intro
Range
Done
Set of value that belong to the Domain are: Values of Independent, Variable, Input Values
Set of value that belong to the Range are: Output Values, Values of Dependent Variables.
What is a function ?Each element of X receives precisely one element of Y when a function from one set to the other is used. The sets X and Y are collectively referred to as the function's domain and codomain, respectively.
The collection of all potential inputs for a function is its domain. Think of this box as the f(x) = 2x function. The domain is only the collection of natural numbers when the input values are x = 1,2,3,4,..., and the values that are returned are referred to as the range.
The collection of all a function's outputs is its range. Example: Let's have a look at the function f: A->B, where f(x) = 2x and A and B each represent a "collection of natural numbers." The domain in this instance is A, and the co-domain is B. The range then appears as the function's output.
Domain :
Values of Independent Variable
Input Values
Range :
Output Value
Values of Dependent Variables.
To learn more about Function refer to :
brainly.com/question/25434341
#SPJ1
XYZ Company
Balance Sheet
Assets
Cash
$45,000
Inventory $41,000
Property $134,000
Total Assets:
Liabilities
Notes
Wages
Equity
Stock
$55,000
$56,000
$50,000
Investment $59,000
Total Liabilities + Equity:
Using the balance
sheet, calculate XYZ
Company's total
assets - liabilities.
Total Assets - Liabilities = $ [?]
Enter
PH
Skip
Total Liabilities + Equity = $220,000.
Total Assets = $220,000.
What is Ratio Analysis and Balance Sheet?
The relationship between the two separate components is established through ratio analysis. Utilizing figures from the income statement, balance sheet, statement of cash flows, and other financial statements, it is used to assess the company's financial performance.
One of a company's financial statements that is created at the end of the year is the balance sheet. It establishes the balance of a company's assets, liabilities, and stockholder equity at the end of the fiscal year.
Here we are given in the Question,
Assets
Cash = $45,000
Inventory = $41,000
Property = $134,000
Liabilities
Notes = $55,000
Wages = $56,000
and
Equity
Stock = $50,000
Investment = $59,000
Total Liabilities + Equity = ( Notes + wages ) + (stock + Investment)
Total Liabilities + Equity = ( $55,000 + $56,000) + ($50,000 + $59,000)
Total Liabilities + Equity = $220,000.
Total Assets = Cash + Inventory + Property
Total Assets = $45,000 + $41,000 + $134,000
Total Assets = $220,000
Therefore,
Total Liabilities + Equity = Total Assets.
To learn more about Balance sheet from the given link
brainly.com/question/1113933
#SPJ1
The fourth term of an arithmetic sequence is 20. The common difference is -1/5 times the first term. Graph the sequence.
Answer:
To graph an arithmetic sequence, you can start by plotting the first few terms of the sequence on the coordinate plane. The x-axis represents the term number, and the y-axis represents the value of the term.
In this case, we are given that the fourth term is 20 and the common difference is -1/5 times the first term. Let's say the first term is x. Then, the second term is x - (1/5)x = 4/5x, the third term is 4/5x - (1/5)x = 3/5x, and the fourth term is 3/5x - (1/5)x = 2/5x.
Therefore, the first four terms of the sequence are x, 4/5x, 3/5x, and 2/5x. If we plot these terms on the coordinate plane, we get the following graph:
(0, x)
(1, 4/5x)
(2, 3/5x)
(3, 2/5x)
This graph represents the first four terms of the arithmetic sequence. To find the fifth term, we can use the formula for the nth term of an arithmetic sequence: a_n = a_1 + (n - 1)d, where a_1 is the first term, d is the common difference, and n is the term number.
For this sequence, the fifth term is x + (-1/5)x = 4/5x. To find the sixth term, we can use the same formula: a_6 = x + (-1/5)x = 3/5x.
By continuing this process, we can plot the rest of the terms of the arithmetic sequence on the coordinate plane.
Step-by-step explanation:
For the following data set, find Q1, Q2, Q3 and the interquartile range.
15, 12, 23, 15, 7, 8, 21, 10, 12, 14, 16, 24, 19
Answer: q1=11 q2=15 q3=20
Step-by-step explanation:
Anthony's brother was 0.45
meters tall last year. He grew
another 0.5 meters this past
year. How tall is he now?
Answer:
0.95meters
Step-by-step explanation:
last year her was 0.45m tall
this past year he is 0.5m
Total = 0.45 + 0.5 = 0.95
Answer: 0.95
Step-by-step explanation: add 0.45+0.5=0.95
A rectangle off the length (x+2) cm and breadth (x)cm has an area of 15cm².find the va of x hence the perimeter of the rectangle.
Answer:
The area of a rectangle is given by the formula:
area = length * breadth
In this case, the length of the rectangle is (x+2) cm and the breadth is (x) cm, so the area is:
area = (x+2) cm * (x) cm
= x^2 + 2x cm^2
We know that the area of the rectangle is 15 cm^2, so we can set up the following equation:
x^2 + 2x cm^2 = 15 cm^2
We can solve for x by using the quadratic formula:
x = (-2 +/- sqrt(4 - 41(-15))) / (2*1)
= (-2 +/- sqrt(64)) / 2
= (-2 +/- 8) / 2
= (-4, 2)
We have two solutions for x, so we need to consider both of them to find the dimensions of the rectangle.
If x=-4, then the length of the rectangle is (x+2) cm = (-4+2) cm = (-2) cm and the breadth is (x) cm = (-4) cm. Since the length and breadth of a rectangle must both be positive, this solution is not valid.
If x=2, then the length of the rectangle is (x+2) cm = (2+2) cm = 4 cm and the breadth is (x) cm = 2 cm. These dimensions give us a valid rectangle with an area of 15 cm^2.
The perimeter of the rectangle is the sum of all four sides, so the perimeter is 2 cm + 2 cm + 4 cm + 4 cm = 12 cm.
Therefore, the value of x that gives us a rectangle with an area of 15 cm^2 and a perimeter of 12 cm is x=2.
The measure of angle X is three times as large as the complement of the angle. Which equation can be used to find the measure of angle X?
A
(x+3)+x=90(x+3)+x=90
B
3x+x=1803x+x=180
C
(x+3)+x=180(x+3)+x=180
D
3x+x=903x+x=
Answer:
Step-by-step explanation: 55
Solve the inequality:
4-3x<16
Answer:
x > -4
Step-by-step explanation:
This is solved just like as if it was an equation. Its a two-step equation (inequality) The only thing that's different is with an inequality, it is imperative that you flip the inequality symbol if you multiply or divide by a negative number.
Here, we'll subtract 4 from both sides. Then divide by -3 on both sides. Flip! the < to a >.
see image.
x > -4.
Step-by-step explanation:1. Write the expression.[tex]4-3x < 16[/tex]
2. Subtract "4" from both sides of the equation.[tex]4-3x-4 < 16-4\\ \\-3x < 12[/tex]
3. Divide both sides by "-3" and switch the inequality symbol.[tex]\frac{-3x}{-3} < \frac{12}{-3} \\ \\x > -4[/tex]
Important. See that we switched the inequality symbol from "<" to ">", and this is because the symbol of the coefficient of variable "x" changed from negative to positive when it was divided by "-3". This rule will always be true, any time the symbol of the variable changed, the inequality symbol changes.
4. Verify.If x >-4 is the correct answer, then substituting x by "-4" in the inequation should make the inequation return the same value on both sides of the inequality symbol (>).
[tex]4-3(-4) > 16\\ \\4-(-12) > 16\\ \\4+12 > 16\\ \\16 > 16[/tex]
That's correct! x > -4 is the correct answer.
A store buys 14 sweaters for $84 and sells them for $504. How much profit does the store make per sweater?
Answer:
$30 per sweater is how much profit the store will make
Step-by-step explanation:
The cost of 1 sweater (for the store) is $6.
The store sells the sweater for $36 (504/14).
The store is making $30 per sweater.
-3/5(1+5n) =102
Solve for n
Answer:
Step-by-step explanation:
Answer:
Step-by-step explanation:
N-2=10n+4/2
Please explain step by step to get picked brainliest
Answer:
n = -4/9
Step-by-step explanation:
first get rid of n on left side
-2 = 9n + 2
Get rid of 2 on right side
-4 = 9n
Make 9n into n
-4/9 = n
ans: n = -4/9
hope this helps :)
Use properties to rewrite the given equation. Which equations have the same solution as 2.3p – 10.1 = 6.5p – 4 – 0.01p? Select two options. 2.3p – 10.1 = 6.4p – 4 2.3p – 10.1 = 6.49p – 4 230p – 1010 = 650p – 400 – p 23p – 101 = 65p – 40 – p 2.3p – 14.1 = 6.4p – 4
Two equations that have the same solution as the given equation are;
2.3p – 10.1 = 6.49p – 4
230p – 1010 = 650p – 400 – p
What is Multiplication property of equality?Both sides of an equation will remain equal, when both sides are
multiplied by the same amount.
The given equation: 2.3·p - 10.1 = 6.5·p - 4 - 0.01·p
Simplifying the above equation by collecting like terms gives;
2.3·p - 10.1 = 6.5·p - 0.01·p - 4 = 6.49·p - 4
2.3·p - 10.1 = 6.49·p - 4
Multiplying both sides of the original equation by 100 gives
100 × (2.3·p - 10.1) = 100 × (6.5·p - 4 - 0.01·p)
230·p - 1010 = 650·p - 400 - p
Learn more about properties of equality here:
brainly.com/question/3638962
#SPJ1
is 11^2 x 5^4 a factor of 11^3 x 5^4
No, 11^2 x 5^4 is not a factor of 11^3 x 5^4.
To see this, you can divide 11^3 x 5^4 by 11^2 x 5^4 and see that there is a remainder.
11^3 x 5^4 = (11 x 11 x 11) x (5 x 5 x 5 x 5)
= 121 x 625
= 75125
11^2 x 5^4 = (11 x 11) x (5 x 5 x 5 x 5)
= 121 x 625
= 75125
75125 / 75125 = 1 with a remainder of 0.
Therefore, 11^2 x 5^4 is not a factor of 11^3 x 5^4.
Find y.
7.54
6.76
18.55
29.83
The length of y in the triangle is 18.55 units.
How to find the side of a triangle?A triangle is a polygon with three sides. The sum of angles in a triangle is 180 degrees. The side y of the triangle can be found using sine law.
Therefore,
a / sin A = b / sin B = c / sin C
Applying the sine law,
y / sin 106 = 15 / sin 51
cross multiply
y sin 51° = 15 sin 106°
divide both sides by sin 51°
y sin 51° / sin 51° = 15 sin 106° / sin 51°
y = 15 sin 106° / sin 51°
Therefore,
y = 15 × 0.96126169593 / 0.77714596145
y = 14.4189254391 / 0.77714596145
y = 18.5536589719
Hence,
y = 18.55 units
learn more on triangles here: https://brainly.com/question/29536478
#SPJ1
solve number 13 please
Therefore , the solution of the given problem of domain is The range of f(x) is a subset of this range, which is the range of -3x-2 (-14,), after answering the given question.
Describe Domain.A function's domain is the set of values that can be sent into it. This collection represents all x values in a function like f. (x). A function's range is the set of possible values that it can accept. This collection includes the values that the return statement when we enter an x value. Assume that x and y are indeed the independent and dependent variables of a function with the formula y = f(x). If a function f provides a way to generate a single value y successfully while using a value of x .
Here,
In this case, f(x)=-3x-2 x < 4
3/4x-1 x≥ 4
Domain
This range, which is the range of -3x-2 (-14,), is a subset of the range of f(x).
Therefore , the solution of the given problem is The range of f(x) is a subset of this range, which is the range of -3x-2 (-14,), after answering the given question.
To know more about Domain visit:
brainly.com/question/28135761
#SPJ1
If a man works for 8 hours a day, he can finish a job in 12 days. How many hours per day must he work to complete it in 10 days?
Answer:
9.6 hours
Step-by-step explanation:
12×8 would equal the amount of hours it takes to complete the job in 12 days so you simply divide that number by 10 which will give you 9.6h
Answer:
6.67 hour per day
Step-by-step explanation:
If
=8 hours a day = 12 days
then
= ? = 10 days
= 10/12 × 8hours per
= 6.67 hours per day.
a3 - c + b, when a=3, b=6, c=8
Answer:
7
Step-by-step explanation:
In order to find the answer to the equation, you must substitute the given values into the equation.
A^3 - C + B
We know that A = 3, B = 6, and C = 8
(3)^3 - (8) + (6)
9 - 8 + 6
1 + 6
7
You can sand 4 over 9 yd.² of wood and one over two hour how many square yards can you send in 3.2 hours?
You can sand 14.4 yd² of wood in 3.2 hours.
What is Ratio?A ratio is used to compare two or more like quantities or numbers with the same units. It is often written with a colon, and when used in words, we say the ratio of one quantity "to" the second quantity. A rate is a ratio that compares two different quantities which have different units.
9:2
x:3.2
therefore;
x = (3.2 x 9)/2
x = 28.8/2
x = 14.4 yd² of wood
Learn more about rates here: https://brainly.com/question/25793394
#SPJ1
To show that NMQ ≈ QPN by SAS, what must be the value or x?
I need help with this please help me
Answer:
x = 3
Step-by-step explanation:
You want to know the value of x, given that NM = 5x-1 and QP = 3x+5 in congruent triangles NMQ and QPN.
CPCTCCorresponding parts of congruent triangles are congruent, so we have ...
NM = QP
5x -1 = 3x +5
2x = 6 . . . . . . . . . . add 1-3x
x = 3 . . . . . . . . . . divide by 2
What is the length x of a diagonal support, to the nearest tenth of a foot?
CORRECT ANSWER
PROVIDE EXPLANATION
The length of x of a diagonal support is 13.8 feet.
What is the hypotenuse of a triangle.The hypotenuse of a triangle is the length of the longest side of the triangle. So that it is always opposite to the measure of the largest angle of a triangle.
In the question given, divide the length of the footbridge into 2 parts.
So that,
Half of the footbridge = 25/ 2
= 12.5 ft
So that applying the appropriate trigonometric function to determine the value of x using any of the congruent triangles. We have;
Sin θ = opposite/ hypotenuse
Sin 65 = 12.5/ x
x = 12.5/ Sin 65
= 12.5/ 0.90631
x = 13.792 feet
The length x of a diagonal support is 13.8 feet.
Learn more about the hypotenuse of a triangle at https://brainly.com/question/21339189
#SPJ1
Solve the system of equations -x-y=-2 and 5x + 7y= 28 by combining the
equations.
Therefore , the solution of the given problem of equation comes out to be x = 11 and y =-9.
What is equation?The equal letter (=) is used to signify equivalence between the statements in a mathematical formula. Using mathematical equation, which are declarations of reality, it is shown that many mathematical variables are equivalent. For instance, the equal sign in the equation y + 6 = 12 divides the values 12 or b + 6 into two halves. The number of words that each side of a symbol corresponds to can be measured. Typically, a symbol's meaning is at odds with itself.
Here,
Given :
=> -x-y=-2
=> 5x + 7y= 28
So ,
=>x = 2-y
thus,
=> 5(2-y) + 7y =28
=> 10 -5y + 7y =28
=> 10 -2y = 28
=> -2y = 18
=> y =-9
and
=> x = 2 - (-9)
=> x = 11
Therefore , the solution of the given problem of equation comes out to be x = 11 and y =-9.
To know more about equation visit:
https://brainly.com/question/649785
#SPJ1
Emily is single and has earned both qualified and nonqualified dividends this year. Her taxable income is $125,000. Using this
information and the tables provided, determine how much tax Emily will pay on each type of dividend.
Type the correct answer in each box. Use numerals instead of words.
Single Taxpayers: Income Brackets
Tax Rate
10%
12%
22%
24%
32%
35%
37%
Income Bracket
O to 9,525
9,526 to 38,700
38,701 to 82.500
82,501 to 157.500
157.501 to 200.000
200,001 to 500.000
> 500,000
Single Taxpayers: Qualified Dividends
and Long-Term Capital Gains
Tax Rate
Income Bracket
0%
15%
20%
The tax rate on Emily's nonqualified dividends is
The tax rate on Emily's qualified dividends is
0 to 38.600
38,601 to 425,800
> 425,800
96. Her taxes on $500 in ordinary dividends will equal
96. Her taxes on $2,000 in qualified dividends will equal
On solving the provided question, we can say that - the value of the percentage = 1/10; 12/100
What is percentage?
A percentage in mathematics is a figure or ratio that is stated as a fraction of 100. The abbreviations "pct.," "pct," and "pc" are also occasionally used. It is frequently denoted using the percent symbol "%," though. The amount of percentages has no dimensions. With a denominator of 100, percentages are basically fractions. To show that a number is a percentage, place a percent symbol (%) next to it. For instance, if you correctly answer 75 out of 100 questions on a test (75/100), you receive a 75%. To compute percentages, divide the amount by the total and multiply the result by 100. The percentage is calculated using the formula (value/total) x 100%.
10%; 12%; 22% and 24%
1/10; 12/100; 11/50 and 6/25
To know more about percentage visit:
https://brainly.com/question/29306119
#SPJ1