1. An organ which receive the waste product carried by the blood.
4. It is a gas that the body needs.
6. It is a combination of hemoglobin and oxygen that enters the body.
7. The respiratory and digestive work as it absorbed
that being
distributed through the body.
10. The system responsible for digestion of food
Down:
2. The ability to maintain a relatively stable internal state that persist despite
changes in the world outside,
3. The respiratory and circulatory work together by exchanging of
5. The signal that circulatory system carries that control the speed of digestion.
8. The system responsible of exchange of gases
9. The system carries nutrients to the entire body cells.
​

Answer:

Molecule name: N--N-METHYL-N-PROP-2-YNYLAMINE

Formula: C13 H15 N

Molecular weight: 185.265 Da

RMA-3 (Rubidium Microporous Aluminosilicate-3) was hydrothermally synthesized from rubidium–aluminosilicate gels without using any organic or inorganic additives, and its structure determined by XRD Rietveld analysis was confirmed as a novel framework topology containing two 8-membered ring pore-openings with dimensions of 0.49 × 0.37 nm and 0.34 × 0.38 nm

Answer:

Hey there! Just wanted to let you know that the term RMA stands for "relative molecular mass" in chemistry. This is a measure of the size of a molecule, calculated by adding up the atomic weights of all the atoms in the molecule. For example, the relative molecular mass of water (H2O) is 18, because the atomic weight of hydrogen (H) is 1 and the atomic weight of oxygen (O) is 16. The relative molecular mass of a molecule is typically expressed in atomic mass units (amu) and can be useful for characterizing and comparing different substances, and predicting their physical and chemical properties.

The empirical formula of the compound is MnO2.

The empirical formula of a substance is the simplest whole-number ratio of atoms in a compound. To find the empirical formula of a compound, you first need to determine the number of moles of each element present in the compound.

Given that the percent composition of the compound is 70% Mn and 30% O, we can assume that 100g of the compound contains 70g Mn and 30g O.

To convert mass to moles, we need to know the molar mass of each element. The molar mass of Mn is 54.9380 g/mol, and the molar mass of O is 16.00 g/mol.

So, we have:

The simplest whole number ratio of Mn and O that gives 1.27 moles Mn and 1.87 moles O is 1:2.

Therefore, the empirical formula of the compound is MnO2.

Learn more about empirical formulas here:

https://brainly.com/question/1603500

#SPJ4

The pressure inside the container with 5 moles of gas, 62 liters volume and 222K temperature is 1.46 atm.

Ideal gas law illustrates the relation between pressure, volume and temperature of a gas. It is represented by the equation

PV = nRT

Where P is the pressure, V is the volume, n is the number of moles, R is the gas constant and T is the temperature.

V = 62 liters

n = 5 moles

R = 0.0821  L(atm) mol⁻¹K⁻¹

T = 222K

PV = nRT

P × 62 = 5 × 0.0821 × 222

P = 5 × 0.0821 × 222/62

P = 1.46 atm

To learn more about ideal gas law here

https://brainly.com/question/27870704

#SPJ4

H2SO3, or sulfuric acid, is a compound that behaves as an acid when dissolved in water. The other compounds listed are either bases, alkanes, or ethers and are not acidic when dissolved in water.

H2SO3, or sulfuric acid, is a compound that behaves as an acid when dissolved in water. Acids are compounds that donate protons when dissolved in aqueous solutions, and sulfuric acid is one of the most common acids used in aqueous solutions. Other compounds listed, such as CH3OCH3, KOH, and CH4, are not acids when dissolved in water. CH3OCH3 is an ether, KOH is a base, and CH4 is an alkane. Acids will typically have a pH value less than 7, while bases have a pH greater than 7. H2SO3 is a strong acid with a pH value of around 1, making it the only compound listed that behaves as an acid when dissolved in water.

learn more about acid here

https://brainly.com/question/14072179

#SPJ4

Your limiting reagent will be copper (II) chloride. The mole ratio is the most crucial tool you'll have to tackle this problem, or any other stoichiometry problem, for that matter.

Keep in mind that in order to make 3 moles of copper from 3 moles of copper (II) chloride, you need 2 moles of aluminum. Unbalanced reaction: Al(s)+HCl(aq) AlCl3(aq)+H2(g). Cl. Balance On the product side there are three Cl atoms and on the reactant side there is one. There is only one hydrogen atom on the reactant side and two on the product side of the reaction Mg + HCl MgCl 2 + H 2. The equation is therefore unbalanced.

Learn more about reagent here-

https://brainly.com/question/28196410

#SPJ4

The quantity of energy required to convert 0.562 kg ice at -20.0°C to steam at 250°C is equal to 1885.4 KJ.

The specific heat capacity can be described as the amount of energy needed to raise the temperature in one unit of material by one-degree celsius.

The addition or emission of heat from the system will the temperature of the substance will be changed:

Q = mCΔT

Given, the amount of ice, m = 0.562 Kg = 562 g

The change in the temperature = 100 -20 = 80°C

The specific heat capacity of the water, C = 4.18J/g°C

The specific heat capacity of the ice, C = 2.03 J/g°C

The phase transition from ice to steam:

H₁ = 562 × 2.03 × (0-(-20))

H₁ = 22,817 J = 22.8 KJ

The enthalpy of the fusion will be absorbed:

H₂ =  n × H(fus)

The number of moles of water = 562/18 = 31.22 mol

H₂ = 31.22 × 6.02 kJ/mol

H₂ = 187.95 KJ

Phase transition from water at 0°C to water at 100°C:

H₃ = 562 × 4.18 × 100

H₃ = 234 KJ

The phase transition from water at 100°C to steam at 100°C:

H₄ = n × H(vap)

H₄ = 31.22 × 40.7 kJ/mol

H₄  = 1270.65 KJ

The heat to make steam at a temperature of 250°C:

H₅ = m × S×ΔT

H₅ = 562 × 2.02 ×150 = 170 KJ

The total energy needed to convert  0.562 kg ice at -20.0°C to steam at 250.0°C:

H = H₁ + H₂+ H₃+ H₄ +H₅

H = 1885.4 KJ

Learn more about specific heat capacity, here:

brainly.com/question/28302909

#SPJ1

A bleaching solution requires 6. 55 g of sodium hypochlorite. 30.47 grams of a 21. 5% by mass solution of sodium hypochlorite should be used

Mass of sodium hypochlorite = 6.55 g

percent composition = 21. 5%

This indicates that there are 21.5 grams of sodium hypochlorite present in every one hundred grams of solution.

Now calculate the number of grams of solution for 6.55 g of solution.

(6.55 g x 100) / 21.5 g = 30.47 g

Therefore, you will need 30.47 grams of a sodium hypochlorite solution that has a mass concentration of 21.5% in order to obtain 6.55 grams of sodium hypochlorite.

You can also learn about percent composition from the following question:

https://brainly.com/question/17505281

#SPJ4

you need 3.00 mL of the 4.00 M sulfuric acid solution to make 12.0 mL of a 0.50 M solution.

Solution is a way to solve a problem or address an issue. It can involve finding an answer or coming up with a strategy to tackle a difficult situation. Solutions can be found through research, brainstorming, trial and error, or by using existing resources.

To solve this problem, we must use the equation:
V1C1 = V2C2
Where V1 is the volume of the concentrated solution, C1 is the concentration of the concentrated solution, V2 is the volume of the dilute solution, and C2 is the concentration of the dilute solution.
In this case, V1 is the volume of the 4.00 M solution that we need, C1 is 4.00 M, V2 is 12.0 mL, and C2 is 0.50 M.
Plugging these values into the equation, we can solve for V1:
V1 = (V2C2) / C1
V1 = (12.0 mL)(0.50 M) / (4.00 M)
V1 = 3.00 mL

To learn more about Solution
https://brainly.com/question/25326161
#SPJ4

A neutral atom and has 14 protons is Silicon

Each of the elements in the Periodic Table has an individual atomic number, or a specific number of protons in its nucleus.

The total number of protons that make up an atom's nucleus is represented by the atomic number of that atom, as is well known. We know that an atom has proton of 14, so the atomic number  of that neutral atom is 14. we can check on the periodic table an atom that have 14 atomic number is silicon.

Therefore, the neutral atom and has 14 protons is Silicon

Learn more about proton at https://brainly.com/question/1379579

#SPJ4

The equivalent point's pH is 3.60.

A numerical measure of how acidic or basic aqueous or other liquid solutions are is called pH, and  The expression, which is widely used in chemistry, biology, and agronomy, translates the hydrogen ion concentration, which normally ranges between 1 and gram-equivalents per liter, into values between 0 and 14. Since pure water has a pH of 7, or gram-equivalents per liter of hydrogen ions, it is neutral (neither acidic nor alkaline). An alkaline or basic solution has a pH over 7, whereas one with a pH below 7 is described as acidic.

HNO2 = 0.100M

KOH= 0.200M

pKa = 3.34

using a formula

pH = pKa + log (salt/acid)

= 3.34 + log (0.200/0.100)

= 3.34 + log 2

= 3.34 + 0.30

= 3.60

The equivalent point's pH is 3.60.

To learn more about equivalent please click on below link

https://brainly.com/question/14672772

#SPJ4

The pieces of information a chemical equation includes are:

A chemical equation is a graphical representation of a chemical process that employs symbols and chemical formulas. Reactant entities appear on the left, as well as product entities appear on the right, with a plus sign connecting the entities in both the reactants and the products and an arrow pointing towards the products to show the direction of the reaction.

Chemical formulae can be symbolic, structural (pictorial diagrams), or a combination of the two. The absolute values of the stoichiometric numbers are represented by the coefficients adjacent to the symbols and formulae of entities. Jean Beguin drew the very first chemical equation in 1615.

To know more about Chemical equations, here

https://brainly.com/question/28294176

#SPJ4

The composition of each compound as the mass percent of its elements is as follows:

Concentration is expressed as mass percent. Additionally, the ingredients in a particular mixture are described. Solution composition can be understood in terms of mass percent. It indicates the mass of solute present in a solution of a given mass. The amount of solute is expressed in mass or moles.

Mass Percent = (Component Mass ÷ Total Mass) x 100% or

(mass of solute ÷ mass of solution) x 100%

a. Sucrose (C₁₂H₂₂O₁₁) with molecular mass of 342.296 u composed of:

Carbon: (12 x 12.01) / 342.296 = 42.18%

Hydrogen: (22 x 1.01) / 342.296 = 6.44%

Oxygen: (11 x 16) / 342.296 = 51.38%

b. Aluminum sulfate (Al₂(SO₄)₃) with molecular mass of 342.14 u is composed of:

Aluminum: (2 x 26.98) / 342.14 = 3.99%

Sulfur: (3 x 32.06) / 342.14 = 4.57%

Oxygen: (18 x 16) / 342.14 = 87.44%

c. Magnetite (Fe₃O₄) with molecular mass of 231.534 u is composed of:

Iron: (3 x 55.85) / 231.534 = 71.83%

Oxygen: (4 x 16) / 231.534 = 28.17%

To know more about mass percent, visit:

https://brainly.com/question/5840377

#SPJ1

A nuclear reaction like α decay takes place in the nucleus of an atom.An element becomes a different element. A chemical reaction like the formation of NaCl involves rearranging the electrons, which are outside the nucleus. The elements are not change. Salt is consists of sodium and chlorine.

The splitting of the uranium-235 nucleus when it is blasted with neutrons is a crucial illustration of nuclear fission. This nuclear reaction can result in a number of different compounds.

Nuclear vs Chemical reactions

1. Alpha decay

U₉₂²³⁸ ⇒ He₂⁴ + Th₉₀²³⁴

A nuclear reaction like α decay takes place in the nucleus of an atom.

An element becomes a different element.

2. Chemical reaction

Na· + ·Cl ⟶ Na⁺ + Cl⁻

A chemical reaction like the formation of NaCl involves rearranging the electrons, which are outside the nucleus.

The elements are not change. Salt is consists of sodium and chlorine.

Thus, A nuclear reaction like α decay takes place in the nucleus of an atom.

To learn more about the nuclear reaction, follow the link;

https://brainly.com/question/16526663

#SPJ1

The concentration of hydroxide ions in the solution is 0.0428 M.

A molecule or atom that has a net electrical charge is called an ion.

The balanced equation for the reaction between HCl and Ca(OH)2 is:

Ca(OH)2 + 2HCl -> CaCl2 + 2H2O

The number of moles of HCl added at the equivalence point can be found by multiplying the volume of HCl added (in liters) by its concentration in moles/liter:

moles HCl = (38.1 mL HCl x 0.028 mol/L HCl) / 1000 mL/L = 0.00107 mol HCl

The concentration of hydroxide ions can be found by dividing the number of moles of hydroxide ions by the volume of the solution:

[OH-] = moles OH- / L of solution

We know that the number of moles of HCl added is equal to the number of moles of OH- present, so:

[OH-] = 0.00107 mol OH- / (25.0 mL / 1000 mL/L) = 0.0428 M

Therefore, the concentration of hydroxide ions in the solution is 0.0428 M.

To know more about electrical charge visit: https://brainly.com/question/28457915

#SPJ4

The amount of energy used to heat the water from 0°C to 70°C is 8,786.4J.

The amount of energy used in heating a substance can be calculated using the following formula:

Q = mc∆T

Where;

According to this question, a student heated 30 milliliters of water from 0 degrees celsius to 70 degrees celsius.

Since 1mL of pure water equals 1 gram, then 30mL of water will equal 30grams of water.

Q = 30 × 4.184 × (70 - 0)

Q = 8,786.4J

Therefore, 8,786.4J is the energy used to heat the water sample.

Learn more about energy at: https://brainly.com/question/8168263

#SPJ1

The empirical formula of the compound with 0.123 moles of bromine and 0.123 moles of lead would be  PbBr.

The empirical formula of a compound is the chemical formula of the compound where the component atoms are in their simplest, whole-number ratios.

In this case, the compound contains bromine and lead:

Br = 0.123 mole

Pb = 0.123 mole

Dividing through by the smallest mole

Br = 0.123/0.123 = 1

Pb = 0.123/0.123 = 1

Thus, bromine and lead are present in a 1:1 ratio in the chemical formula.

In other words, the empirical formula of the compound containing 0.123 moles of bromine and 0.123 moles of lead is PbBr.

More on empirical formulas can be found here: https://brainly.com/question/14044066

#SPJ1

Based on the information, UV light is more likely to damage the material.

Due to the fact that the infrared light bounces off the quartz, which increases its energy, the quartz may become warm.

The colors of paper and fabric can deteriorate due to ultraviolet light from the sun. In the presence of ultraviolet light waves, the chemicals in colored dyes can degrade. Sunburns may also result from ultraviolet radiation.

Paper and other organic materials will deteriorate, bleach, and deteriorate due to ultraviolet radiation. All of these modifications may reduce readability, affect how well artwork is regarded for its aesthetic qualities, and restrict access to the information it contains.

To know more about UV light visit:

https://brainly.com/question/13358417

#SPJ4

If 1 gram (g) of glycogen is split into maltose: The total mass of the product would be 2 grams (g).

When 1 gram of glycogen is broken down into maltose, the result is two molecules of maltose, each having a molecular weight of 342.29 g/mol. Therefore, the total mass of the product is equal to 2 x 342.29 g/mol, or 684.58 g/mol, which is equal to 2 grams (g).

This is because each molecule of maltose is composed of two molecules of glucose, which have a mass of 342.29 g/mol each. Therefore, when the 1 gram of glycogen is split into maltose, the total mass of the product is 2 grams (g).

Learn more about Glycogen: https://brainly.com/question/4303062

#SPJ4

Given data

Mass of the piece of a solid carbon dioxide is m = 6.8 g

Volume of the solid carbon dioxide is V=4L

The temperature is T = 23°C = 296 K . The pressure of the air in the container is

740 Pho = 740 torr = atm 76

The temperature is T = 23 deg * C = 296K

The pressure of the air in the container is

Pho = 740 torr 740 760 atm

(a)The expression of ideal gas equation is given by,

PV = nRT

PV = (m/M) * RT

Where, P is the pressure in which the container after all the carbon dioxide is vaporizes.

M is the molar mass of the solid carbon dioxide (M = 44.01g / m * ol)

R is the universal gas constant R = (0.0832kJ / m * olK)

Substitute the all values in the above equation and calculate the value of pressure in which the container after all the carbon dioxide is vaporizes.

6.8 g 44.01 g/mol P(4L)= P= (0.0832 kJ/mol K) (296 K) (0.1545 mol) (0.0832 kJ/mol K) (296 K)

P = 0.951atm

(4L)Thus, the pressure in which the container after all the carbon dioxide is vaporizes is 0.951 atm.

To learn more about carbon dioxide here:

https://brainly.com/question/22530423

#SPJ4

Different substances have different properties because of the differences in their atomic and molecular structure, bonding types, and strength of their chemical bonds. These differences can be due to the number of atoms, the arrangement of atoms, and the types of electrons involved in the bonding.

The properties of elements and compounds are determined by the types and arrangements of the atoms that make up the substance. For example, water (H2O) and hydrogen peroxide (H2O2) have different properties due to their different molecular structures. Water is made up of two hydrogen atoms and one oxygen atom, while hydrogen peroxide is made up of two hydrogen atoms and two oxygen atoms. may have different characteristics. The strength of chemical bonds between atoms or molecules can be affected by the number and type of electrons involved in the bond. Because of this, some substances are more stable than others and have higher melting and boiling points.

In addition, some properties are also affected by the physical state of the material, such as solubility, density, and conductivity. These properties are determined by the strength of the intermolecular forces between the particles of the substance.

Learn more about the properties of the matter here: https://brainly.com/question/9402776

#SPJ4

Photoautotroph has been derived from the combination of three words, photo -meaning "light", autos- meaning "self", and troph meaning "nutrition".

Land plants and photosynthetic algae are both photoautotrophs. These species contain pigments that can capture light, like chlorophyll. Origin of the word: photo- (light) + auto (self) + troph (nourishment). Autotrophs known as photoautotrophs generate complex chemical substances like proteins, lipids, and carbohydrates by absorbing light. Photosynthesis is the name given to this light-mediated process.

An energy-rich carbohydrate like glucose is produced by plants using carbon dioxide, inorganic salts, and water during a process called photosynthesis. As a byproduct, oxygen is also produced, other than glucose. Land plants and photosynthetic algae are both photoautotrophs. These species contain pigments that can capture light, like chlorophyll.

To know more about autotrophs, refer to the following link:

https://brainly.com/question/28623341

#SPJ4

An empirical formula is a type of chemical formula that shows the simplest ratio of elements present in a compound, rather than the total number of atoms.

What are Atoms?

Atoms are the smallest indivisible particles that make up all matter in the universe. They consist of a nucleus containing protons and neutrons, surrounded by a cloud of electrons. Atoms make up all elements, which are the building blocks for all other forms of matter.

Step 1: Calculate the atomic mass of carbon, hydrogen, oxygen, and nitrogen.

Carbon: 12.011 g/mol

Hydrogen: 1.008 g/mol

Oxygen: 15.999 g/mol

Nitrogen: 14.007 g/mol

Step 2: Convert the mass of each element to moles.

Carbon: 83.884 g / 12.011 g/mol = 6.983 mol

Hydrogen: 10.486 g / 1.008 g/mol = 10.381 mol

Oxygen: 18.640 g / 15.999 g/mol = 1.164 mol

Nitrogen: (200.00 g - (83.884 g + 10.486 g + 18.640 g)) / 14.007 g/mol = 6.871 mol

Step 3: Divide each mole value by the smallest mole value to obtain the simplest whole number ratio.

Carbon: 6.983 mol / 6.983 mol = 1

Hydrogen: 10.381 mol / 6.983 mol = 1.485

Oxygen: 1.164 mol / 6.983 mol = 0.167

Nitrogen: 6.871 mol / 6.983 mol = 0.985

The empirical formula of the compound is CHNO.

To know more about atoms,

https://brainly.com/question/16666188

#SPJ4

A compound is found to contain 43.64 % phosphorus and 56.36 % oxygen by weight The molecular weight for this compound is 283.88 g/mol. is the molecular formula for this compound is P₂O₅.

Given that :

mass of the oxygen = 56.36 %

molar mass of the oxygen = 16 g /mol

moles of the oxygen= mass / molar mass

                                          = 56.36 / 16

                                          = 3.52 mol

mass of the phosphorus = 43.64 %

molar mass of the phosphorus = 31 g/mol

moles of the phosphorus = 43.64 / 31

                                         = 1.41 mol

dividing by the smallest one :

moles of the phosphorus = 1 = 2

moles of the oxygen = 2.5 = 5

The molecular formula is P₂O₅.

To learn more about molecular formula here

https://brainly.com/question/9529491

#SPJ4

Design extra reinforcements in the building's windows so that they can withstand the vibrations from sonic booms.

What are Sonic booms?

Sonic booms are shock waves created when an object, such as an aircraft or spacecraft, travels through the air at a speed faster than the speed of sound (approximately 767 mph). Sonic booms generate a loud noise that can be heard over long distances. Sonic booms can cause property damage and are hazardous to people's hearing.

Extra reinforcements in the building's windows can help to absorb the shock of sonic booms. This is done by adding additional layers of materials such as glass, plastic, rubber, or metal to the window frame. These materials will help to dampen the vibrations from sonic booms, reducing the noise and preventing damage to the windows. Additionally, window seals can be installed to reduce air infiltration, further helping to protect the windows from the vibrations of sonic booms.

Hence, Option C is correct.

To know more about Sonic booms,

https://brainly.com/question/3172656

#SPJ4

When a hydrogen atom is part of a molecular structure, it is always a terminal atom.

On the periodic table, hydrogen belongs to the group 1 element. Consequently, a hydrogen molecule contains two valence electrons. There are two identical atoms in the H2 molecule. As a result, any atom can be regarded as a centre atom. An atom attached to a central atom is referred to as a terminal atom if it is not H. Here are two illustrations of this differentiation. Add bonding electrons to the total number of electrons. The end of hydrogen will never come. The centre will often contain the least electronegative element. Since hydrogen can only have two electrons in its valence shell and hence can only make one bond, it can never be the centre atom.

To learn more about atoms click here https://brainly.com/question/1566330

#SPJ4

The arrangement of the particles in a substance affects its properties because the arrangement of the particles determines the interactions between the particles.

The arrangement of the particles affects the properties of a substance because the interactions between the particles determine the overall characteristics of the substance.

For example, if the particles in a substance are arranged in an orderly, crystalline structure, the inter-particle forces are strong, making the material harder and more rigid. On the other hand, if the particles are arranged in a disordered, amorphous structure, the inter-particle forces are weaker, making the material softer and more malleable.

The arrangement of the particles also affects the physical and chemical properties of the substance. If the particles are arranged in a crystalline structure, the substance will have a higher melting point, boiling point, and hardness than if the particles were arranged in an amorphous structure.

For more questions like Properties click the link below:

brainly.com/question/13562531

#SPJ4

Ribose is an important sugar with a molar mass of 150.15 g/mol and an empirical formula of CH₂O . Its molecular formula is C₅H₁₀O₅

A molecular formula  is defined as the exact number of different atoms present in the molecule of a compound. On the other hand, an empirical formula is defined as the simplest whole number ratio of the different atoms present in a molecule of a compound.

Given here,

molar mass of ribose sugar = 150.15 g/mol

empirical formula = CH₂O

To find: molecular formula

empirical formula mass of ribose sugar

=  (12+ 1×2+ 16) g/mol

= 30 g/mol

molar mass/ empirical formula mass

= 150.15 gmol⁻¹ / 30  gmol⁻¹

=5.005

≈5

we know that

molecular formula

= molar mass/ empirical formula mass  × empirical formula

=5 ×CH₂O

= C₅H₁₀O₅

Thus, the molecular formula is C₅H₁₀O₅

To know more about molecular formula here

https://brainly.com/question/26484895

#SPJ4

Evaporation occurs when a liquid turns into vapour . The particles in the liquid gain energy and move faster and further until some of them escape from the surface and become a vapour

To learn more about Evaporation refers to:

brainly.com/question/24258

#SPJ1