Answer:
532.5 grams
Explanation:
The balanced chemical equation of this reaction is as follows:
2NaOH + H2SO4 → 2H2O + Na2S04
From the above balanced equation, it shows that 2 moles of sodium hydroxide (NaOH) produces 1 mole of sodium sulfate (Na2SO4).
Using mole = mass/molar mass to convert mass to mole
Molar mass of NaOH = 23 + 1 + 16 = 40g/mol
mole = 300/40
mole = 7.5moles of NaOH
Since 2 moles of sodium hydroxide (NaOH) produces 1 mole of sodium sulfate (Na2SO4).
Then, 7.5 moles of NaOH will produce 7.5/2 = 3.75moles of Na2SO4.
mole = mass/molar mass
Molar mass of Na2SO4 = 23(2) + 32 + 16(4)
= 46 + 32 + 64
= 142g/mol
Mass of Na2SO4 = 3.75 × 142
= 532.5g
How many milliliters of 1.5 M H.So, are needed to exactly
neutralize 20. milliliters of a 0.8 M KOH solution?
Answer: A volume of 10.66 mL of 1.5 M H is required to exactly neutralize 20. milliliters of a 0.8 M KOH solution.
Explanation:
Given: [tex]M_{1}[/tex] = 1.5 M, [tex]V_{1}[/tex] = ?
[tex]V_{2}[/tex] = 20 mL, [tex]M_{2}[/tex] = 0.8 M
Formula used to calculate the volume is as follows.
[tex]M_{1}V_{1} = M_{2}V_{2}[/tex]
Substitute the values into above formula as follows.
[tex]M_{1}V_{1} = M_{2}V_{2}\\1.5 M \times V_{1} = 0.8 M \times 20 mL\\V_{1} = 10.66 mL[/tex]
Thus, we can conclude that a volume of 10.66 mL of 1.5 M H is required to exactly neutralize 20. milliliters of a 0.8 M KOH solution.
i need help asap plzz i will give 100 points
Answer:
u can g00gle it , just copy nd paste its all there. hope this helps
Explanation:
_ As + _ NaOH → _Na3AsO3 + _H2
the act of salt and sugar dissapering in water is called
Answer:
dissolving
Explanation:
Answer:
dissoliving
Explanation:
salt and sugar are both soluble
9. Which of the following is a nucleotide found in DNA?
1
O
deoxyribose sugar, phosphate, nitrogenous base
ribose sugar, amino acid, nitrogenous base
ribose sugar, phosphate, nitrogenous base
deoxyribose sugar, amino acid, nitrogenous base
A reaction requires 22.4 L of gas at STP . There are 25.0 L of gas at 101.5 kPa and 373 K.
Which statement is true?
Use the ideal gas law: PV = nRT where R = 8.31 L-kPa/mol-K
A. There is not enough gas for the reaction.
B. Given this information, there is no way to tell if there is enough gas for the reaction.
C. There is excess gas for the reaction.
D. There is enough gas for the reaction.
Answer:
STP is 101.325 kPa pressure and 273K temperature
Also, at STP, 1 mol of an ideal gas = 22.4 L
Since the question states that 22.4 L are needed at STP, we know that ONE MOLE is needed. Now, the question is, how many moles are actually present?
V = 25.0 L
P = 101.5 kPa
T = 373K
n = ?
R = 8.31 L-kPa/Kmol
Solving the ideal gas law for n (moles) and comparing that to 1 mole, we have...
n = PV/RT = (101.5)(25.0)/(8.31)(373)
n = 0.82 moles of gas. THIS IS NOT ENOUGH as it is less than the ONE mole required.
Explanation:
Number of molecules in 16 grams of h2co3
For this one u can work out the amount of moles in h2co3 by using moles=mass/mr(of h2co3 is 52)
so 16/62=0.258moles then u use the equation
number of particle = moles × 6.02×10^23
=0.258×6.02 ×10^23
=1.55×10^23 molecules.
hope this helps
The atoms of which element bond to one another in chains, rings, and networks?
1.
barium
2.
carbon
3.
iodine
4.
mercury
Submit An:
What is the volume of .750 M hydrochloride acid required to react completely with 25.00 mL of .290 M NaOH solution?
from
HCl + NaOH----> NaCl +H2O
n of acid=1
n of base=1
Molarity of acid=750M
Molarity of base=290M
volume of base=25ml
from
Va=Mb ×vb×na
Ma×nb
Va=290×25×1
750×1
Va=7250
750
Va=9.67ml
The volume of .750 M hydrochloride acid is required to react completely with 25.00 mL of .290 M NaOH solution is 9.67ml
HCl + NaOH----> NaCl +H2O
n of acid=1
n of base=1
Molarity of acid=750M
Molarity of base=290M
volume of base=25ml
Therefore,
Va=Mb ×vb×na
Ma×nb
Va=290×25×1
750×1
Va=7250
750
Hence,
Va=9.67ml
What is Hydrochloric acid?
Hydrochloric acid, also known as muriatic acid, is an aqueous solution of hydrogen chloride. It is a colorless solution with a distinctively pungent smell. It is classified as a strong acid. It is a component of the gastric acid in the digestive systems of most animal species, including humans. Hydrochloric acid is an important laboratory reagent and industrial chemical.
Learn more about Hydrochloric acid
https://brainly.com/question/27808720
#SPJ2
Please help!!!!!!!!!!!!!!!!!!!
Answer:
Hydrochloric acid + calcium hydroxide = calcium chloride + water
The pH of a solution with a [OH-] of 1x10^-6 is
Answer:
pH = 6
Explanation:
Given that,
The concentration of [OH]⁻ ion is [tex]10^{-6}[/tex].
We need to find the pH of the solution.
We know that,
[tex]pH=-\log[OH]^-[/tex]
Put all the values,
[tex]pH=-\log(10^{-6})\\\\pH=6[/tex]
Hence, the pH of the solution is 6.
Let's start by figuring out the amount in miles. From there, we can easily find the equivalent mass. Which equation do we need to find out how many moles of NH4Cl would there be in 500 mL of a 0.300 M solution of it?
A. n=C x V
B. C=V x n
C. C=n x V
D. n=C / V
Answer:
A. n= C x V
Explanation:
Molarity of a solution is the molar concentration of that solution. It can be calculated using the formula:
M = n/V
Where;
M = molarity (M)
n = number of moles (n)
V = volume (mL)
To calculate the number of moles from a given molarity value and volume, we say:
n = M × V
For this case of NH4Cl;
V = 500mL = 500/1000 = 0.5L
M = 0.300 M
n = 0.300 × 0.5
n = 0.15moles
Answer: n=CxV
Explanation:
True or false:
The following equation is balanced properly: 6CO2 + 6H2O → C6H12O6 + O2
What chemical reaction happens when water breaks down into hydrogen and oxygen
Answer:
bldg licking no-good also
Answer:
Water splitting is the chemical reaction in which water is broken down into oxygen and hydrogen: 2 H2O → 2 H2 + O. Efficient and economical water splitting would be a technological breakthrough that could underpin a hydrogen economy, based on green hydrogen.
Aqueous solutions of a strong acid and a weak acid of equal concentrations are compared. Which of the following statements are true?
I. The strong acid reacts with a metal oxide but the weak acid does not
II. The weak acid is less disassociated than the strong acid
III. The strong acid has a greater conductivity that the weak acid.
Answer:
Explanation:
_______ are events that disrupt the stability of a whole ecosystem.
A.Resources
B.Disturbances
C.Species
PLEASE HELP WILL GIVE LOTS OF POINTS!!!!!!!!!!!! What is the daughter particle if Uranium -234 undergoes beta decay? Write your answer in isotopic notation.
Answer:
Given nuclide is uranium-234.
If it undergoes beta decay then, what will be the daughter particle?
Explanation:
The beta particle decay increases the atomic number of the nuclide by one.
There is no change in the mass number of the nuclide.
The decay of beta particle from Uranium-234 is shown below:
It forms Np-93.
Consider the redox reaction below talking place in certain electro chemical cell: Cu(s)+cu^2+(aq) -------> Cu^2+(aq) + Cu (s)
Answer:
cu+2 ------ oxidation whereas Cu ------ reduction.
Explanation:
In the reaction, cu+2 is the place where oxidation occurs because this cupric ion losses electrons which causes +2 charge on it. we know that oxidation is the loss of electrons and reduction is the gaining of electrons so the Cu is the place or atom at which reduction occurs. Electrochemical cells have two electrodes, which is anode and the cathode. The anode is the electrode where oxidation occurs whereas the cathode is the electrode where reduction takes place.
Evaluate the method of separation to be used.
1. Stones and rice (for cooking)
Answer:
hand picking
Explanation:
as stone is bigger in size we can see them with our eyes so we can handpick it
Answer:
The method of hand picking is used to separate undesirable substances such as small pieces of stones from wheat, rice and pulses. The food grains containing small pieces of stones are taken in a flat container. The pieces of stones are picked up from the grains by hands, one by one, and thrown away.23 Oct 2020
Will give brainliest
Process name of water vapor to ice
Answer:
Deposition
this is the process of a substance changing its state from gas to solid. Solid to gas is known as sublimation
Copper(II) sulfate is an active ingredient in tree stump remover. In order to help remove
a tree that was causing foundational damage to a school, a chemistry student soaked
the roots with copper(ll) sulfate. The removed tree was later dried and used as
firewood. Assuming the copper(II) sulfate is present in the wood, what color would be
observed in the fire?
Answer:
the tree red
Explanation:
Copper (II) substances burn to produce bluish-green flames.
Flame test for copper (II)The copper (II) present in the wood will make the flame produce a bluish-green color.
This is because copper (II) compounds are known to produce flame colors that range from blue to bluish-green when tested in the laboratory.
This is because the electrons in the atoms of copper lose energy and drop to lower energy, releasing the lost energy as light in the process.
More on flame tests can be found here: https://brainly.com/question/6357832
#SPJ2
If the power source in a motor was to be replaced with an electrical load, and the armature was turned by hand, then what device have you made?
Answer:
This question doesnt make much sense but ill try to answer it.
A brushed DC electric motor is an internally commutated electric motor designed to be run from a direct current power source. Brushed motors were the first commercially important application of electricity. If the shaft of a DC motor is turned by an external force, the motor will act as a generator. DC Motor rotation does have to do with the voltage polarity and the direction of the current flow.
Match the following quantities
-
6.02 x 1023 atoms of Al
-
1 molecule of N2O
-
6.02 x 1023 molecules of C2H4
-
1 atom of Au
A.
28.05 g
B.
26.98 g
C.
44.01 u
D.
196.97 u
Answer:
C.44.01 u
Explanation:
basta ayan yong answer ko
Based on your understanding of how bond types influence a material’s properties, identify each of the following compounds as being made of ionic, covalent, or metallic bonds.
ANSWER
Steel: Metalic
Propane: Covalent
Calcium chloride: ionic
Water: Covalent
Edge 2021
Answer: The given compounds are identified as being made of ionic, covalent, or metallic bonds:
Steel - Metallic bondsPropane - Covalent bondsCalcium chloride - Ionic bondsWater - Covalent bondsExplanation:
A bond formed by transfer of electrons from one atom to another is called an ionic bond. An ionic bond is formed between a metal atom and a non-metal atom.
A bond formed by transfer of electrons from one atom to another is called a covalent bond. A covalent bond is formed between two or more non-metal atoms only.
Steel is actually an alloy of carbon and iron where there is less than 2% carbon, 1% manganese and small amounts of silicon, phosphorus, oxygen and sulphur are present.
When atoms of metals are held together then bond formed between these atoms is called metallic bond.
Hence, steel is made of metallic bond.
Chemical formula of propane is [tex]CH_{3}CH_{2}CH_{3}[/tex] as there are only non-metal atoms are present. So, sharing of electrons takes place in such atoms due to which covalent bonding will be there.
Hence, propane is made up of covalent bonds.
Calcium chloride contains a metal and a non-metal atom. This means that electrons are being transferred from calcium atom to the chlorine atom. Hence, bond present in calcium chloride is ionic bond.
Water has chemical formula [tex]H_{2}O[/tex]. Since, non-metal atoms are present there so sharing of electrons takes place between hydrogen and oxygen atoms. Hence, covalent bond is present in water.
Thus, we can conclude that given compounds are identified as being made of ionic, covalent, or metallic bonds:
Steel - Metallic bondsPropane - Covalent bondsCalcium chloride - Ionic bondsWater - Covalent bondsSteel: ✔ metallic
Propane: ✔ covalent
Calcium chloride: ✔ ionic
Water: ✔ covalent
Why nitration of benzene is easier than that of benzene......... And how is phenol converted to TNT
Answer:
The nitration of phenol is easier than that of benzene because benzene has delocalised pie-electrons which makes it more stable than phenol.
Phenol is converted to Trinitrotoluene by adding zinc dust to remove the hydroxyl group, then reacted with Aluminium oxide followed by haloalkane.
what are some different natural events and man-made activities that can affect ocean acidification?
Ocean acidification is the process of decreased pH levels of the oceans. The burning of fossil fuels and industrialization are man-made activities that lead to this process.
What is Ocean acidification?Ocean acidification is an increased concentration of acidic components of the oceans due to an increase in the carbon dioxide level of the oceans.
Human activities like cutting down a large number of trees, discharging from industrial outlets, and burning fossils like petrol, coal, diesel, etc. are leading to increased acidification of the oceans.
Therefore, natural causes like increased salinity, flood, and earthquake are the reasons for oceanic acidification.
Learn more about ocean acidification here:
https://brainly.com/question/7604502
how many moles of H2 are required to make 10 moles of water?
Explanation:
10 moles h20 is required
10 moles of H₂ are required to make 10 moles of H₂O.
What is Stoichiometry ?Stoichiometry is an important concept which helps us use the balanced chemical equation to measures the amount of reactants and products.
What is Balanced Chemical equation ?A balanced chemical equation is chemical equation that has equal number of atoms on both sides of arrow that is reactant and product.
First we have to write the Balanced chemical equation
2H₂ + O₂ → 2H₂O
To produce 2 moles of water, 2 moles of hydrogen are required to produce 10 moles of water.
So,
[tex]\frac{2\ \text{moles of}\ H_2}{2\ \text{moles of}\ H_2O}[/tex] × 10 moles of H₂O
= 10 moles of hydrogen are required.
Thus, from above conclusion we can say that 10 moles of H₂ are required to make 10 moles of H₂O.
Learn more about the Stoichiometry here: https://brainly.com/question/14935523
#SPJ2
. If you have 5.42 x 1024 aluminum atoms, approximately how many moles is that?
Please help me
Answer:
5.42x10^24 atoms/1 x 1 mole/6.022x10^23
= 9.5 mol
An apple has been left out, and it is starting to rot. Which of the following is the best method to slow down the chemical changes that are occurring?
The best method is to keep rinsing the apple with water every hour.
The best method is to keep the apple in a cooler place.
The best method is to put the apple in the sun to warm it up.
The best method is to wrap the apple in plastic.
In which classification of matter are the components chemically combined?
A metal
B compound
C mixture
D Metalloids