A 3 kg toy car is moving at 4 m/s. Calculate the Ek if the car were moving TWICE as fast. Include units

Answer:

a.the measurement or extent of something from end to end; the greater of two or the greatest of three dimensions of a body.

b.is the measurement of how tightly a material is packed together. It is defined as the mass per unit volume.

c.Mass is a physical magnitude and general property of matter that expresses the inertia or resistance to change in motion of a body.

d.Mass is a physical magnitude and general property of matter that expresses the inertia or resistance to change in motion of a body.

e.

Resistance and impedance (in AC circuits) are one such pair of synonyms (DC circuits). Technically speaking, they both stand in the way of current flow, but factor ability of impedance also takes resistance into account.

Obviously all, reactance and inductance are also included in this (capacitors).

Impedance, which results from the interaction of reactance and ohmic resistance, is the active resistance to AC of an electric circuit or component. We also describe it as any restriction of an electric current's ability to move energy when voltage is applied.

The more precise meaning is the overall resistance a circuit of electricity provides to an AC current flowing at a single frequency. In conclusion, we measure reactance and resistance in ohms, and we denote this measurement with the sign Z.

For such more question on impedance .

https://brainly.com/question/13134405

#SPJ4

The margin of error is 3.96.

The value of e, or the margin of error, can be calculated using the formula:

e = z*(s/√n)

where:

z = the critical value from a standard normal distribution table (for c = 0.99, z = 2.576)

s = the sample standard deviation (in this case, s = 2.6)

n = the sample size (in this case, n = 16)

So, to find the margin of error for this scenario, we plug the given values into the formula:

e = 2.576*(2.6/√16) = 2.576*(2.6/4) = 2.576*0.65 = 3.96

Therefore, the margin of error is 3.96.

It's worth noting that this value represents the range within which we expect the true population value to fall with a certain level of confidence

Read more about Margin of Error:

https://brainly.com/question/13990500

#SPJ4

The force required to raise the box up the ramp when the ramp is 12 meters long, the box is 4 meters and the box weighs 200 newtons is 653.33 N (7840/12)

To determine the force required to raise the box up the ramp, we can use the work-energy principle.

Work = Change in PE

W = PEf - PEi

where

W = work done (Joules)

PEf = final gravitational potential energy (Joules)

PEi = initial gravitational potential energy (Joules)

The gravitational potential energy of an object is given by the formula:

PE = mgh

where

m = mass of the object (200 N)

g = acceleration due to gravity (9.8 m/s^2)

h = height (4 meters)

We can find the change in potential energy as follows:

PEf = mgh = 200 x 9.8 x 4 = 7840 J

PEi = mgh = 200 x 9.8 x 0 = 0 J

So, the change in potential energy is 7840 J.

Now we can calculate the work done as:

W = PEf - PEi = 7840 - 0 = 7840 J

The work done is equal to the force exerted on the object multiplied by the distance it is moved:

W = F x d

7840 = F x 12

So, the force required to raise the box up the ramp is 653.33 N (7840/12)

Learn more about force from the given link.

https://brainly.in/question/23858054

#SPJ4

The average reading must be multiplied by a multiplier of 1.111 to become the rms value for just a sine wave flow.

Wave-current interaction in fluid dynamics is the interaction of a mean flow with surface gravity waves.After the interaction begins, both the waves as well as the average flow are impacted since the contact implies an energy exchange.

While the tide is a type of vertical motion of the ocean's water, waves and ocean circulation represent horizontal movements of the water.

To know more about wave current visit:

https://brainly.com/question/2047457

#SPJ4

Charging by Contact is positive. On object B, a positive charge will remain.

The fundamental physical property of matter, electric charge, exerts a force when kept in an electric or magnetic field. A magnetic field is produced by a moving electric charge, and an electric charge is associated with an electric field. Magnetic and electric fields combine to form the electromagnetic field. The interaction of the charges results in the electromagnetic force, which is the fundamental force in physics. Throughout this session, tell us about electric charges, their types, and their traits.

A scalar quantity is an electric charge. Only when a quantity complies with the laws of vector addition, such as the triangle law of vector addition and the parallelogram law of vector addition, can it be said to be a vector in addition to having a magnitude and direction. In the case of an electric current, the resultant current of these two currents at a junction is an algebraic sum rather than a vector sum. Therefore, despite having magnitude and direction, an electric current is a scalar quantity.

Learn more about Charge from given link

https://brainly.com/question/18102056

#SPJ4

It is a passive stretch if it depends on an outside force. Stretches that are passive and static are a fantastic technique to increase flexibility and can also be utilised to cool down.

Passive stretching, which is called a static stretch, is a technique in which you remain calm and do not add to the range of motion. Static stretching involves stretching all the way to the end and holding the stretch. An external force, like a partner, is instead produced by an external force.

This stretching technique relies on a prop, accessory, or partner to help increase the stretch, thus you aren't actively assisting in extending your range of motion. Passive stretches improve flexibility while reducing muscle soreness and tiredness after a workout.

Stretching with movement is known as dynamic stretching. It stretches the muscles by using the muscles themselves. The usual "static" stretching is not like this.

To learn more about static stretching refer to:

https://brainly.com/question/10238897

#SPJ4

When the proton passed through magnetic field then the angle between the proton velocity and the field is 49° degrees.

Given

Speed v = 4.00 m/s

Mg field =1.7 T

Force = 8.21  10-3  N

Given:- Velocity of the particle = 4.00x10m/3. 2 Magnitude of the magnetic field B= 1.701.

Force experienced by the particle: 8.20x10¹³N.

To find: The between the particle velocity and field. angle a

We know that :- F= q(√xB)

9 (VBSino) 928 - Sina

Sina = 8.20×10-13 1.6×10-19×4×10 6 x 1.70 = 0.7536.

Sin a = 0.7536. ~ Sin 0 = 0.754

a = sin' (0.7536)

a = 49°

we have a point charge q0 located at r and a set of external charges conspire so as to exert a force F on this charge. We can define the electric field at the point r by: E =Fq0

The (vector) value of the E field depends only on the values and locations of the external charges, because from Coulomb’s law the force on any “test charge” proportional to the value of the charge. However to make this definition really kosher we have to stipulate that the test charge q0 is “small”; otherwise its presence will significantly influence the locations of the external charges.

The electric field is a vector. we can see that its SI units must be It follows from Coulomb’s law that the electric field at point r due to a charge q located at the origin is given by E = kq where r is the unit vector which points in the same direction as r.

To know more about proton velocity here

https://brainly.com/question/24761394

#SPJ4

The turtle traveled 10 meters in 3,918.6 seconds using simple subtraction.

In mathematics, to subtract is to eliminate something from set of things or a group of things. When we remove from the group, the number of items falls or gets less. The minuend, forces at play, and difference are the elements of a subtraction problem.

It involves calculating the distinction between two numbers. The icon looks like this: (minus). In this operation, we take a particular number then split it by a fewer group. In other words, we divide one integer by another. Click here for some difficult addition and subtraction sums.

He gets a value of 4218.6 s

he discovers that the stopwatch had already been running for about 300 s

Time taken by turtle = 4218.6 - 300

= 3918.6 s

To learn more about subtraction from given link

https://brainly.com/question/28467694

#SPJ4

The tension in the wire is 2.99986 N.  The amplitude of the oscillation of the wire is approximately 0.01067 meters.

The tension (T) can be calculated using the equation:

T = m × g

T = 0.306 × 9.81

T = 2.99986 N

The linear mass density (μ) of the wire is given by the mass per unit length of the wire. It is calculated as:

μ = m(wire) ÷ L(wire)

μ = 0.185 ÷ 1

μ = 0.185 kg/m

The speed (v) of the wave on the wire can be determined using the equation:

v = √(T ÷ μ)

v = √(2.99986 ÷  0.185 )

v = 7.351 m/s

The power (P) transmitted by the wave is related to the amplitude (A) and the speed (v) of the wave through the equation:

P = 2π² × μ × v × A² × f²

A² = P ÷ (2π² × μ × v × f²)

A² = 139 ÷ (2π² × 0.185 × 7.351 × (60.0)²)

A² = 1.138 × 10⁻⁴

A = √(1.138 × 10⁻⁴)

A = 0.01067 m

Therefore, The amplitude of the oscillation of the wire is approximately 0.01067 meters.

To know more about the oscillation:

https://brainly.com/question/31472633

#SPJ12

The properties of stars are:  mass, age, distance, metallicity (chemical composition), variability and motion through space.

An astronomical object known as a star is made up of a bright plasma spheroid that is held together by gravity. The Sun is the star that is closest to Earth.

Other stars are also visible at night with the unaided eye, but because to their great distances from Earth, they appear as stationary points of light. Many of the brightest stars have names, and the most notable stars have been grouped into constellations and asterisms.

Star catalogues have been put out by astronomers that list the known stars and offer standardized stellar labels.

Learn more about star here:

https://brainly.com/question/7379319

#SPJ1

Answer: Stars produce energy through nuclear fusion.

Stars are massive objects composed of gas.

Stars are composed primarily of hydrogen and helium.

P.S can I get the brainiest?

The correct answer is 1; 2; 3. Lever can either have a mechanical advantage or no mechanical advantage, depending on the lever's mechanical design.

Mechanical design is the process of taking a product from concept to reality. Through this process, engineers analyze, design, and manufacture components and systems that are used in a variety of industries. Mechanical design involves a broad range of skills, including mathematics, engineering, physics, and computer-aided design (CAD) software. The process begins with the understanding of the problem and the requirements of the design. From there, engineers must select the best materials, create a detailed design, and simulate the design in a virtual environment. After the design is complete, engineers then use the principles of manufacturing to produce the components through machining, molding, and other processes.

If the lever is designed with a long arm and a short arm, it can have a mechanical advantage. If the lever is designed with two arms of equal length, it will not have a mechanical advantage.

To learn more about mechanical design
https://brainly.com/question/30085844
#SPJ1

Answer:

(Question)

A class __ lever never has a mechanical advantage.

A class __ lever always has a mechanical advantage.

A class __ lever could go either way.

(Answer)

3;2;1

(Question)

A lever is used to lift an object with a weight of 60 Newtons. The effort force is 15 meters from the fulcrum, while the load force is 5 meters from the fulcrum. What is the mechanical advantage?

(Answer)

3

(Question)

With which class of levers is it possible to increase the force that must be applied?

(Answer)

class 1 and 3

(Question)

600 Joules of work is used to lift a box from the ground to a height of six meters. How much work would have been done if a lever would have been used with an effort arm of 12 meters and a load arm of 6 meters?

(Answer)

600 J

(Question)

A lever with an effort arm of 10 meters and a load arm of 2 meters is used to lift an object weighing 220 Newtons to a height of 4 meters. If 400Joules of work is done, how much force must have been applied?

(Answer)

100 N

Explanation:

i just finished the quick check UwU

The numerical value of the vertical velocity of the car at time t=0 is 4.91 meters per second.

Given,

t = 0.25 s

y = 0.75 m

α = 0.95 rad/s²

ω = 6.3 rad/s

Wf=6.54 rad/sec

V=wr

6.54*0.75

V=4.91 m/s

The classic example of independent motions along different axes is projectile motion. Projectile motion is the combination of two separate linear motions. The horizontal motion doesn’t affect the vertical motion, and vice versa. Since there is no acceleration in the horizontal direction (ignoring air resistance), the projectile moves with constant velocity in the x direction.

If an object slides down a friction less plane inclined at angle θ, the acceleration down the plane is g sin θ, because the component of g (the downward acceleration due to gravity) that points along the plane is g sin θ. (There is no acceleration perpendicular to the plane because the normal force from the plane cancels the component of the gravitational force perpendicular to the plane.

Another type of 2-D motion is circular motion. If an object is moving in a circle of radius r with speed v at a given instant, then the (inward) radial component of the acceleration vector a equals. This radially inward acceleration is called the centripetal acceleration. If additionally the object is speeding up or slowing down as it moves around the circle.

To know more about vertical velocity here

https://brainly.com/question/27917951

#SPJ4

Using the Pythagorean theorem, we can determine that the best distance for the ladder is 20 feet away from the base of the building.

The third side of this triangle is unknown, so we will apply the Pythagorean theorem to determine it. There is 25 feet of ladder available, the wall is 15 feet above the ground, the ladder must be at least that high.

In order to calculate the distance between the ladder and the building =

X = √(25^2) - (15^2)

= 20 feet

Thus, the ladder should be placed 20 feet away from the base of the building.

To learn more about Pythagorean theorem, click here:

https://brainly.com/question/29769496

#SPJ4

If you push with a force of 65 N and the bookcase accelerates at 0. 12 m/s2. The answer to the given question is A65=41×A.A=1.2m.

Functions and co efficients are: Ff=μkFN F f = μ k F N

The equation for kinetic friction, where FN is the object's normal force and k is the coefficient of kinetic friction.

The resistive force of friction (Fr) divided by the normal or perpendicular force (N) pushing the objects together yields the coefficient of friction (fr), which is a numerical value. The formula which is fr = Fr/N serves as a representation of kinetic friction.

The primary distinction between static and kinetic friction is that kinetic friction occurs when there is relative motion between the surfaces, whereas static friction occurs when the surfaces are at rest.

To learn more about friction visit:

brainly.com/question/13000653

#SPJ4

In the laboratory, the quantity θ in the grating equation nλ=d sin θ can be determined in several ways.

What is laboratory ?

A laboratory is a specialized facility used to conduct scientific research, experiments, and analysis. Laboratories are typically equipped with instruments, tools, and other equipment necessary for conducting experiments, tests, and analyses. They may also be used to produce and store chemical, biological, or physical samples and materials.

Meter sticks and geometry/trigonometry can be used to measure the lengths of the grating lines, d, and the wavelength of light, λ, and then calculate the angle using the formula θ = sin-1 (nλ/d). The angular scale on the experimental apparatus can also be used to measure the angle directly. Alternatively, a protractor can be used to measure the angle directly.

To learn more about laboratory

brainly.com/question/28114741

#SPJ4

Complete Question
In the grating equation nλ=d sin θ, the quantity θ can be determined in the lab by using meter sticks and geometry/trigonometry, using the angular scale on the experimental apparatus, or using a protractor. To determine the value of θ using meter sticks and geometry/trigonometry, the lengths of the grating lines, d, and the wavelength of light, λ, must first be measured. Using these values, the angle can be calculated using the formula θ = sin-1 (nλ/d). To determine θ using the angular scale on the experimental apparatus, the angular scale can be used to measure the angle directly. To determine θ using a protractor, the angle can be measured directly using the protractor.

If we use the aceleration equation, we can calculate the height value: The height of the track is: 98.04 m,

The height of the track can be calculated using the equation:

h = (v^2)/(2g)

Where h is the height, v is the velocity, and g is the acceleration due to gravity (9.8 m/s^2).

Therefore, the height of the track is:

h = (14^2)/(2*9.8) = 98.04 m

The equation h = (v^2)/(2g) is derived from the equation of motion for an object moving in a uniform gravitational field. This equation states that the change in potential energy is equal to the kinetic energy of an object. The potential energy of an object is determined by its height in the gravitational field, and the kinetic energy of an object is determined by its velocity. Therefore, the equation of motion can be used to calculate the height of an object, given its velocity.

Learn more about potencial energy :

https://brainly.com/question/23979653

#SPJ4

The amount of heat transferred to or from the system is −720 J. The first law of thermodynamics states that U = Q + W

Where U is the change in the system's internal energy and W is the work performed on it. From the given, we obtain: U = 500 J W = 220 J.

Thus,  = Δ −  = −500 − 220 = −720 J

A process is referred to as adiabatic if there is no heat exchange. This process must be adiabatic because the system's internal energy drops and it is an ideal gas.

As a result, in adiabatic operations, the temperature of the gas rises as its volume decreases. This is due to the temperature shift being fueled by the gas's increased effort.

To know more about thermodynamics visit:-

https://brainly.com/question/1604031

#SPJ1

Answer:  D.

-720 joules

Explanation: plato :)

If this situation ever happens, you should always try to escape through an open window first because it is your best option.

There are several ways to categorize automobiles; in North America, trucks and passenger vehicles are separated by rated rating and total interior capacity, respectively (GVWR). In the European Union, vehicle segments employ linear metrics to represent size.

The private automobile has changed contemporary civilization for more than a century by enabling autonomy and freedom of movement. Due to the growing distances between places like home, work, educational establishments, retail malls, and recreational facilities, mobility has become more and more crucial.

To know more about Vehicles visit:

https://brainly.com/question/8860896

#SPJ4

The total linear momentum of the antelope and the tiger is 2650 Kg m/s.

The result of a system's mass x its velocity is its linear momentum. Linear momentum is denoted by the sign p = m v. The relationship between momentum and an object's mass and speed is straightforward.

Given -

mass of antelope = 55 Kg

mass of tiger = 140 Kg

speed of antelope = 10 m/s

speed of tiger = 15 m/s

from linear momentum formula

P = m × v

For antelope-

P = 55 × 10

P = 550 Kg m/s

For tiger-

P = m × v

P = 140 × 15

P = 2100 Kg m/s

Hence, total momentum is-

550 + 2100

2650 Kg m/s

To know more about linear momentum visit :-

https://brainly.com/question/4126751

#SPJ4

Initial velocity of 2.4 m/s and an angle of 60°.

The x component is 2.4 m/s cos(60°) = 2.4 m/s (0.5) = 1.2 m/s

The y component is 2.4 m/s sin(60°) = 2.4 m/s (0.866) = 2.08 m/s

Initial velocity is the speed an object has when it starts moving in a certain direction. It is the speed that an object has before any external forces act upon it. Initial velocity is a vector quantity, meaning it has both a magnitude, or size, and a direction. Initial velocity is usually measured in meters per second (m/s). It is important to note that the initial velocity of an object can be different depending on the reference frame from which it is measured.

To learn more about Initial velocity visit:

brainly.com/question/28996913

#SPJ1

The complete question is-

A paper airplane is thrown with an initial vclocity of 2,4 m and angle of 60" Find the Voz: 012m/s 0.62 mn/& 0 1.70 m/8 208 m/$

Thermal energy can be found from kinetic and potential energy by calculating the amount of work done on an object. Work is equal to the amount of force multiplied by the distance moved by the object.

The Kinetic energy is equal to the mass of the object multiplied by the square of its velocity. Potential energy is equal to the mass of the object multiplied by the acceleration of gravity multiplied by the height of the object. Thermal energy is equal to the sum of the kinetic and potential energies.

Learn more about Kinetic energy :

https://brainly.com/question/20658056

#SPJ4

The displacement in SHM is 2/3 of amplitude and the fraction of total kinetic energy is Ek = 5/9.

Let’s derive the equations needed from the first principle. The displacement for SHM with amplitude A and angular speed is:

s = A sin(ωt) ---- (1)

Differentiate the displacement to get the velocity:

v = s′ = A ωcos(ωt)

So for a mass m, the kinetic energy is:

Ek = 1/2 mv²

Ek =  1/2 m × (Aωcos(ωt) )² ---- (2)

At time t = 0 the displacement s = 0 and so all the energy is kinetic. Therefore the total energy is:

E (total) = 1/2m ×( Aωcos(0) )²

E (total) = 1/2m × (Aω)² ---- (3)

We can rephrase the kinetic energy in terms of the total energy by comparing (2) and (3):

Ek = E (total) cos²(ωt)

Using the identity  cos² (x) + sin² (x) = 1,  we can rewrite this equation as:

Ek = E total (1 − sin²) (ωt)) ---- (4)

Additionally, we are aware that potential energy U = E(total) Ek, so

U = E (total) − E (total) (1 − sin²(ωt) )

U = E (total) sin²(ωt)  ---- (5)

Now in this question, we’re given that  s = 2/3 A, so from our displacement formula  (1)  we have:

s = Asin (ωt) = 2/3 A

This is what we get for the kinetic energy when we insert it into equation (4):

Ek = E (total)(1 − (2/3)²)

Ek = 5/9 (E (total) )

Hence, the displacement in SHM is 2/3 of the amplitude, and the fraction of total kinetic energy is Ek = 5/9.

To know more about energy:

https://brainly.com/question/29733880

#SPJ4

The interval by which the factor by which the office noise is related to the standard threshold of hearing is (100,000, 10,000,000].

The factor by which the office noise is related to the standard threshold of hearing is given by x = 10^(d/10), where d is the sound intensity in decibels. Since the decibel reading was consistently above 50 but never above 70, we can calculate the range of x using the following:

50 < d <= 70

10^(50/10) < x <= 10^(70/10)

To find the range of x, we need to calculate the 10^(50/10) and 10^(70/10)

10^(50/10) = 10^5 = 100000

10^(70/10) = 10^7 = 10000000

Therefore, the range of x, the factor by which the office noise is related to the standard threshold of hearing is (100,000, 10,000,000].

Learn more about Threshold value here: https://brainly.com/question/726252

#SPJ4

Your question is incomplete but most probably the complete question is:

Sound intensity, in decibels, d, can be written using a comparison factor, x, that compares sound intensity to the standard threshold of hearing. d = 10log(x) A sensor measures the sound intensity, in decibels, of an office over time. The decibel reading was consistently above 50, but never above 70. On what interval is the factor by which the office noise is related to the standard threshold of hearing? (17, 18.5) (17, 18.5] (100,000, 10,000,000] (100,000, 10,000,000)

The object's momentum will vary by an amount equal to 80 N-s.

Describe momentum.

The relationship between a particle's mass and velocity determines its momentum. Having both a force and motion, it has both a direction and a magnitude. The force exerted on a particle is equal to the rate at which its momentum is gaining momentum over time, according to Isaac Newton's second equation of motion.

Newton's second law states that if a steady force acts on a particle for a predetermined period of time, the impulse, which is the result of the force and the intervals (the impulse), is equal to the change in momentum.

The time it would take a constant action to bring a particle to rest, on the other hand, is the measure of a particle's momentum.

According to the details in the query,

The system's starting momentum is 0.

F = ma

a = F/m

a = 10/6

a = 1.67 m/s²

utilize the motion equation,

v = u + at

v = u + (1.67)(8) (8)

v = 13.33 m

The momentum will then be,

p = mv

p = 6 × 13.33

p = 80 N-s.

To learn more about Momentum from given link

https://brainly.com/question/27020102

#SPJ4

On a cold winter night, a story comes on the news at stations across the northern part of Florida recommending that residents turn on their outside faucets to allow a slow drip of water. It would that be recommended because it prevents the water from bursting the pipes.

Option D is correct.

During freezing temperatures, one of the things that you can do in order to prevent water from freezing and bursting the pipes is to run your faucet because  running water does not freeze as easily as standing water, so letting it drip overnight will help.

The body faces the effects when subjected to freezing temperatures as it the body begins to lose heat faster than it can be produced. Prolonged exposure to cold will eventually use up your body's stored energy. The result is hypothermia, or abnormally low body temperature.

Learn more about freezing temperatures at: https://brainly.com/question/24314907

#SPJ1

The situation will be describe with:

C. The fish increased the buoyant force by reducing its density.

A swim bladder is an internal organ that some fish use to control their buoyancy. The fish can adjust the amount of gas in the swim bladder to make itself more or less dense than the water around it. In order to rise toward the surface of the water, the fish would need to decrease its density relative to the water, which it can do by increasing the amount of air in its swim bladder. This increase in air in the swim bladder reduces the fish's density, which in turn increases its buoyancy and allows it to rise to the surface.

There are different ways that a fish can control its buoyancy, and different species of fish may have different adaptations for doing so. Some fish may have other organs or structures that can be used to control buoyancy, such as lipids in their body tissue, or fins that can be used to control their position in the water.

Additionally, some fish may have the ability to change their shape or size in order to control their buoyancy, such as by swallowing air or by compressing their swim bladder. However, in general, the most common way for fish to control buoyancy is by adjusting the amount of gas in their swim bladder.

Learn more about swim bladder here:

https://brainly.com/question/14431269

#SPJ4

The heat transfer theory attempts to anticipate the energy transfer that may occur between material bodies as a result of temperature differential. Conduction, convection, and radiation are the three processes through which heat may be moved from one location to another.

Heat transfer is a thermal engineering subject that deals with the creation, consumption, conversion, and exchange of thermal energy (heat) across physical systems.

Heat transmission techniques include thermal conduction, thermal convection, thermal radiation, and energy transfer via phase shifts. To achieve heat transfer, engineers also address the transfer of mass of different chemical species (mass transfer in the form of advection), either cold or hot. While these processes have separate properties, they frequently occur in the same system at the same time.

Learn more about thermal energy  to visit this link

https://brainly.com/question/18989562

#SPJ4

1.54 is the acceleration of the crate. The Second Newton's law states that an object acquires acceleration when an external unbalanced net force is applied to it.

That acceleration is proportional to the net force and inversely proportional to the mass of the object. It can be expressed with the formula: Where, Fn = Net force, m  = mass. The m=200 kg crate is pushed horizontally with a force Fa=700 N. The friction force opposes the motion and a horizontal net force appears causing the acceleration.

The forces in the vertical direction are in balance since the crate does not accelerate in that direction, thus the weight and the normal force are equal: N = W = mg, The friction force can be calculated by using the coefficient of friction μ: μ*n. Calculating the normal force: N = 200 * 9.8 = 1,960 N. The friction force is f=0.2*1960, f=392. The horizontal net force is 308. Finally, the acceleration is computed: m/s^2

To know more about the acceleration visit:-

brainly.com/question/13821209

#SPJ4

The photon is typically described as an electromagnetic (EM) wave, such as the image below. These are the two components of the wave longitudinal and transverse.

A photon is a particle of light which essentially is a packet of electromagnetic radiation. The energy of the photon depends on its frequency (how fast the electric field and magnetic field wiggle, this needs better wording, for 'fast electric field' and 'wiggle'.

A photon is a tiny particle that comprises waves of electromagnetic radiation. As shown by Maxwell, photons are just electric fields traveling through space. Photons have no charge, no resting mass, and travel at the speed of light.

To know more about photon visit

https://brainly.com/question/14758126

#SPJ4