Answer:
6.19m/s
Explanation:
Given parameters:
Mass of bowling ball = 35.2kg
Momentum = 218kgm/s
Unknown:
Velocity of the bowling ball = ?
Solution:
Momentum is the quantity of motion a body possess;
Momentum = mass x velocity
218 = 35.2 x velocity
Velocity = 6.19m/s
Question 17 of 25
A sound wave from a brass bell passes through the air with a
wavelength of 3.5 m. When the sound wave originated in the
brass bell, its wavelength was 47 m. If the sound wave has a
constant frequency of 100 Hz, what was its speed as it
traveled through the brass bell? (The equation for wave speed
is v= f*1.)
A. 3,500 m/s
B. 4,700 m/s
C. 350 m/s
D. 470 m/s
Answer:
The speed of the wave as it travelled through the brass bell is;
B. 4,700 m/s
Explanation:
The given parameters are;
The wavelength of the sound wave produced from the brass bell, [tex]\lambda _{(air)}[/tex] = 3.5 m
The wavelength of the wave in the brass bell, [tex]\lambda _{(brass \ bell)}[/tex] = 47 m
The frequency of the wave in the brass bell, f = 100 Hz
The given equation for wave speed, v = f × λ
Therefore, the speed of the wave as it travelled through the brass bell, [tex]v _{(brass \ bell)}[/tex], is given as follows;
[tex]v _{(brass \ bell)}[/tex] = f × [tex]\lambda _{(brass \ bell)}[/tex] = 100 Hz × 47 m = 4,700 m/s
The speed of the wave as it travelled through the brass bell = [tex]v _{(brass \ bell)}[/tex] = 4,700 m/s
Answer:
B.) 4700 m/s
Explanation:
HELP PLEASE!
A 700 kg race car makes one lap around a track. It has a velocity of 20 m/s with a centripetal force of 5,600 N. What is the radius of the track?
A speed skater goes around a turn with a 25 m radius. The skater has a velocity of 15 m/s and experiences a centripetal force of 720 N. What is the mass of the skater?
A 900-kg car moving at 5 m/s takes a turn around a circle with a radius of 30 m. Determine the net force acting upon the car.
An 800 kg race car makes one lap around a track. It has a velocity of 40 m/s with a centripetal force of 16,000 N. What is the radius of the track?
PLEASE EXPLAIN AND SHOW WORK!
The centripetal force is the force that keeps a body moving in a circular path.
The centripetal force is given by; F = mv^2/r
1) We have;
F = 5,600 N
v = 20 m/s
r =?
m = 700 kg
Making r the subject of the formula;
r =mv^2/F
r = 700 × (20)^2/5,600
r = 50 m
2) F = mv^2/r
F = 900 × (5)^2/30
F = 750 N
3) Making r the subject of the formula;
r =mv^2/F
r = 800 × (40)^2/ 16,000
r = 80 m
Learn more: https://brainly.com/question/11324711
A car battery produces 12 from electric that each produce 2.0 V. What is the minimum number of electric cells in car battery?
Answer:
6
Explanation:
From the given question, since a total of 12 V was obtained from the battery which is made up of a number of cells with each producing 2.0 V.
Assuming that the cells have a very low internal resistance, then;
minimum number of electric cells in the car battery = [tex]\frac{total voltage from the cells}{individual voltage of the cells}[/tex]
= [tex]\frac{12}{2}[/tex]
= 6
Thus, the minimum number of electric cells in the car battery is 6.
This implies that the addition of 6 cells which has 2.0 V supply in the battery produces a total of 12 V. Provided that the cells have a very low internal resistance.
A softball and a baseball are launched from 2 different pitching machines at the same time.
th
Softball
182 g
165 m/sec
Baseball
143 g
112 m/sec
Which of these BEST explains what factors give the baseball and softball different velocities?
O mass and speed
O mass and direction
O speed and direction
O size and mass
How much of the matter in the universe is comprised
of atoms?
a. 1%
b. 100%
c. 30%
d. 99%
Answer: I believe the correct answer is A.
Hello, what does the first condition mean?
Answer:
An object at rest is described by Newton's First Law of Motion. An object in static equilibrium has zero net force acting upon it. The First Condition of Equilibrium is that the vector sum of all the forces acting on a body vanishes.
Explanation:
Answer:
see below
Explanation:
the first condition means that the light ray inside the optically denser medium hits the surface of the optically less dense medium.
this in simple words means, light must be travelling from am optically denser medium to an optically less dense medium
hope this helps :)
Kinetic energy can be calculated using the formula KE = 1/2mv2. What is the kinetic energy of a bicycle that has a mass of 20 kg and is traveling at a velocity of 10 m/sec?
KE = 1000 J
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightPhysics
Energy
Kinetic Energy Formula: [tex]\displaystyle KE = \frac{1}{2}mv^2[/tex]
Energy is in Joulesm is mass (in kg)v is velocity (in m/s)Explanation:Step 1: Define
m = 20 kg
v = 10 m/s
Step 2: Find KE
Substitute [KE]: [tex]\displaystyle KE = \frac{1}{2}(20)(10)^2[/tex]Exponents: [tex]\displaystyle KE = \frac{1}{2}(20)(100)[/tex]Multiply: [tex]\displaystyle KE = (10)(100)[/tex]Multiply: [tex]\displaystyle KE = 1000[/tex]A bucket is filled partly with water such that its combined mass is 2.5 kg. It is tied to a rope and whirled in a circle with a radius of 1.4 m. The speed at the top of the circle is 4.0 m/s and the speed at the bottom of the circle is 6.0 m/s. Determine the magnitude of the net force acting on the bucket at the bottom of the circle.
Answer:
1. Simply τ = m x g x r = 54kg x 9.8m/s² x 0.050m = 26 N·m
2. The bucket creates a torque
τ = 75kg x 9.8m/s² x 0.075m = 55 N·m,
so we must create the same torque with the handle.
55 N·m = F x 0.25m
F = 220 N
Explanation:
Hope this is helpful
10. Electrical Power: Why do our electronic devices get hot? We know
that electrons flow through a circuit to do useful work in the circuit.
Explain why do resistors/ resistive elements heat up in a circuit. *
Answer:
Now, think on the electrons flowing through a conductor (we can think on the resistor as a simple conductor, like a piece of metal)
Inside the conductor, we have some "fixed" (they do not flow with the current) electrons, such that as the current flows in the conductor, the flowing electrons can interact with the fixed ones in the conductor. Then we can have collisions inside the conductor.
In those collisions, the flowing electrons leave energy in the conductor, and as we know, heat is a form of energy. Then when we have a lot of these collisions, the temperature of the conductor increases.
That is why electronic devices get hot.
Also, as the temperature of a conductor increases, the electrons inside of it start to move more, then the probability of an interaction with the flowing electrons increases.
PLEASE HELPP
Look at the picture
When the temperature of a substance is lowered, its particles
a. move more quickly
b. stop moving completely
c. escape the attractive forces of the other particles
d. move more slowly
Option d...
Move more slowly........
When the temperature of a substance is lowered its particles move more slowly. Option d is correct. Temperature directs to the hotness or coldness of a body.
What is temperature?Temperature directs to the hotness or coldness of a body. In clear terms, it is the method of finding the kinetic energy of particles within an entity. Faster the motion of particles more the temperature.
Temperature is essential in all areas of Science right from Physics to Geology and also it is important in most parts of our everyday life.
As the temperature of a substance is lowered its particles move more slowly.
Hence Option d is correct.
To learn more about the temperature refer to the link;
https://brainly.com/question/7510619
If two 1000kg cars have a gravitational force of 1.067x10^-5 N towards each other, how far apart are they?
Answer:
6.25m
Explanation:
Given parameters:
Masses of the car = 1000kg
Gravitational force = 1.067 x 10⁻⁵N
Unknown:
Distance between them = ?
Solution:
To solve this problem, we use the expression below from the universal gravitational law;
Fg = [tex]\frac{G x mass 1 x mass 2}{distance^{2} }[/tex]
G = 6.67 x 10⁻¹¹
1.067 x 10⁻⁵ = [tex]\frac{6.67 x 10^{-11} x 1000 x 1000 }{d^{2} }[/tex]
d = 6.25m
7. A volcanic island arc is formed when
Can anyone help me with these questions? TIA!!
Resistance is a material's tendency to resist the flow of charge (current). Resistance is the measure of the opposition to motion of free electrons(current) due to their continuous collisions with the atom of the lattice. An electric current flows when electrons move through a conductor, such as a metal wire. The moving electrons can collide with the atoms in the metal. This makes it more difficult for the current to flow, and causes resistance. The unit of Resistance is "OHM". Ohm is denoted by the greek letter "Ω".
_____________________________________Question 2:[tex]\Huge\text{Ohm's Law}[/tex]If a current 'I' is caused to flow in a conductor by a battery of potential difference 'V', it is found that the current is directly proportional to potential difference provided there is no change in the conductor itself. That means more will be I if we increase V. So
[tex]{\Longrightarrow}\qquad \qquad \qquad I {\propto} V\\\\{\Longrightarrow}\qquad \qquad \qquad I = KV[/tex]
Where K is Conductance. Conductance is the ability of a conductor to allow the current to pass through it. Resistance(R) is the reciprocal(opposite) of conductance(K) thus K is inversely proportional to R,
[tex]{\Longrightarrow}\qquad \qquad \qquad I = \frac{1}{R}V \\\\{\Longrightarrow}\qquad \qquad \qquad V = IR[/tex]
This is known as OHM's Law, and V = IR is the equation linking the R, V and I.
_____________________________________Question 3:[tex]\Huge\text{Circuit Diagram:}[/tex]
Circuit Diagram no 1 attached is of this question. In the circuit diagram, V is voltmeter to find the potential difference, A is the ammeter to find the current, R is the resistance i.e. the conductor wire, The switch and the battery.
Suppose the wire of length 100 cm is connected to a battery, the Voltmeter observes the potential difference and ammeter reads the current of the wire. We will use the R, V and I i.e. V = IR equation to find out the resistance of that wire and Record the resistance. Then attach another small wire of suppose 90 cm to the battery, and similarly Find out its resistance too. After recording the resistance 3 or 4 times, you will observe that When you decrease the length of the wire,
The Resistance decreasesThe Current increases The Potential Difference decreases_____________________________________Question 4:[tex]\Huge\text{Resistance:}[/tex]The resistance of a conductor depends upon the following factors.
Length(L), Longer the length of conductor, Greater the resistance.[tex]{\Longrightarrow}\qquad \qquad \qquad R\quad {\propto}\quad L[/tex]
Cross-Sectional Area(A), thicker the Wire, lesser the Resistance.[tex]{\Longrightarrow}\qquad \qquad \qquad R\quad {\propto}\quad \frac{1}{A}[/tex]
Material of the Conductor, The Resistance also changes because of the material of the wire. If we use copper it will have different resistance than the steel wire.The relation between only length of the wire and resistance is [tex]R\quad {\propto} \quad L[/tex] . The relation of R, L and A is given by, ρ
[tex]{\Longrightarrow}\qquad \qquad \qquad R\quad {\propto}\quad \frac{L}{A}\\\\{\Longrightarrow}\qquad \qquad \qquad R\quad =\ \frac{\ {\rho}\ L\ }{A}[/tex]
Where ρ is known as resistivity depends upon the nature of the material of the wire. The meter of resistivity is Ω x m(Ohm x meter).
_____________________________________Question 5:[tex]\Huge\text{I-V Characteristic:}[/tex]
I-V curves of an electrical device or component, are a set of graphical curves which are used to define its operation within an electrical circuit. I-V characteristic curves show the relationship between the current flowing through an electronic device and the applied voltage across its terminals. The circuit diagram to find I-V characteristic must have a resistor which is a device or component connected to a battery which is providing the potential difference V. When a resistor is connected to a battery, current I is observed due to drift velocity. To find the current and potential difference(voltage) the circuit must have the Ammeter and voltmeter. Recorded current and voltage must be used to plot the graph to check the I-V characteristic. The picture attached is the circuit diagram.
_____________________________________Question 6:We calculate the resistance at constant temperature by ohm's law. The Ohms law is applied at constant temperature because the resistance of any material varies with the change in temperature. It shows a linear relationship between the applied voltage and the resulting current, resistance being a constant. So we could use V = IR because resistance is constant at constant temperature.
_____________________________________Best Regards,'Borz'
1. A net force of 13 Newtons acting north on an object for 4.0 seconds will produce an impulse of?
Answer:
48 kg m/s north
Explanation:
This is not the exact answer but if there's something really close choose that answer
A water heater takes 2.5A at 230V. What is its hot resistance?
Answer:
92 OHMS
Explanation:
The resistance will be "92 ohm".
According to the question,
Current,
2.5 AVoltage,
230 VAs we know the formula,
→ [tex]I = \frac{V}{R}[/tex]
or,
→ [tex]R = \frac{V}{I}[/tex]
By substituting the values, we get
→ [tex]= \frac{230}{2.5}[/tex]
→ [tex]= 92 \ ohm[/tex]
Thus the answer above is right.
Learn more:
https://brainly.com/question/16841137
What state of matter can easily be compressed (squeezed into a much smaller space)? *
gases
solids
solids, liquids, and gases
liquids
Answer:
gases.
Explanation:
gases have the highest volume. if you compress (increase pressure) a gas, the volume decreases and it will take up less space as a liquid, and if you compress more, the liquid will become a solid.
additionally info: this is generally true, but as you get into more difficult subjects, this rule does not hold. for example, some substances cannot obtain a certain phase of matter when they are a certain temperature and or pressure. but that could be way more out of this questions league.
If there is a difference in air pressure between two locations, what happens?
Answer:
High in the atmosphere, air pressure decreases. ... A low pressure system has lower pressure at its center than the areas around it. Winds blow towards the low pressure, and the air rises in the atmosphere where they meet. As the air rises, the water vapor within it condenses, forming clouds and often precipitation.
Explanation:
A 9.0 kg potted plant slides down a 25.0º incline with an acceleration of 2.4 m/s2. What is the coefficient of kinetic friction between the potted plant and the incline?
Answer:
0.196
Explanation:
According to Newton's second law
\sumFx = ma
Fm-Ff = ma
Fm is the moving force
Ff is the frictional force
m is the mass = 9kg
a is the acceleration = 2.4m/s²
Fm = Wsin theta
Fm = 9(9.8)sin25°
Fm = 37.28N
Ff is the frictional force = nmgcos theta
Ff = n(9)(9.8)cos25°
Ff = 79.94n
Substitute the given values into the formula
37.28-79.94n = 9(2.4)
-79.94n = 21.6-37.28
-79.94n = -15.68
n = 15.68/79.94
n = 0.196
Hence the coefficient of kinetic friction between the potted plant and the incline is 0.196
A 50kg person standing still in ice skates throws their helmet to the right at 25 m/s while on a frictionless surface. This gives the person a speed of 1.0m/s leftwards. What is the mass of the helmet?
Consider rightward as the positive direction.
Answer:
2.0 kg
Explanation:
Help Please!
Think about how you can get the color white from using light versus how you can get the color white from using paint or dye. Now, think about how you can get the color black from using light versus from paint or dye. Using this, explain why we call coloring from light “additive” and coloring from paint or dyes “subtractive”.
Answer: Subtractive colors absorb OR subtract some lights causing it to reflect, and creating white.
Explanation:
Subtractive colors are created by completely or partially absorbing (or subtracting) some light wavelengths and reflecting others.
describe four uses of the heating effect of electricity in the home.
Answer:
Explanation:
Electric Bulb: In an electric bulb, the filament of bulb gives light because of heating effect of electricity. The filament of bulb is generally made of tungsten metal; having melting point equal to 3380°C.
Electric iron: The element of electric iron is made of alloys having high melting point. Electric heater and geyser work on the same mechanism.
Electric fuse: Electric fuse is used to protect the electric appliances from high voltage; if any. Electric fuse is made of metal or alloy of metals, such as aluminium, copper, iron, lead, etc. In the case of flow of higher voltage than specified, fuse wire melts and protects the electric appliances.
i need help cause i dont get it
I think it is wrong somehow
Across
3) biomass
5) fossil
6) dioxide
7) hydro
8) nuclear
Down
1)?
2)?
4) solar
A 80 N horizontal force is applied to a 20.0 kg block at rest on a horizontal surface where µS = 0.6.? What is the magnitude of the force of friction on the block?
Answer:
The frictional force on the block is 118 N.
Explanation:
Given;
horizontal force applied on the block, f = 80 N
mass of the block, m = 20.0 kg
coefficient of friction, μ = 0.6
The frictional force on the block is calculated as;
F = μR
F = μ(mg)
F = 0.6(20 x 9.81)
F = 117.7 N
F = 118 N.
Therefore, the frictional force on the block is 118 N.
a person runs 15 kilometers in two hours what is his/her average speed
Answer:
[tex]\displaystyle V=7.5\ km/h[/tex]
Explanation:
Average Speed
If an object travels a distance d in a time t regardless of the direction, the average speed is the quotient of the distance over the time:
[tex]\displaystyle V=\frac{d}{t}[/tex]
It's known a person runs d=15 kilometers in t=2 hours, thus his/her average speed is:
[tex]\displaystyle V=\frac{15\ km}{2\ h}[/tex]
Calculating:
[tex]\boxed{\displaystyle V=7.5\ km/h}[/tex]
An electromagnetic wave is composed of electrical and magnetic energy.
Please select the best answer from the choices provided
T
F
Answer:
the answer is T!!
!!!!!!!!
Answer:
true
Explanation:
hope this helps
Help me I got this photo please
Answer:
Carbon Sink- photosythesis, ocean absorption, fossilization
Carbon Source- combustion, respiration
Explanation:
I NEED HELPP!!!
Calculating the Value of an Unknown Resistor
1. An airplane flies with a constant speed of 720 km/h. How long will it take to travel a distance of 1500
kilometers?
Answer:
[tex]125\:\mathrm{minutes\: or\: }2.08\bar{3}\: \mathrm{hours}[/tex]
Explanation:
Speed is given by [tex]s=\frac{d}{t}[/tex], where [tex]d[/tex] is distance travelled and [tex]t[/tex] is time. Rearranging this equation, we have [tex]t=\frac{d}{s}[/tex].
Plugging in our given information:
[tex]t=\frac{d}{s}=\frac{1500\:\mathrm{km}}{720\:\mathrm{km/h}}=2.08\bar{3}\: \mathrm{hours}[/tex]
Thus, our answer is:
[tex]2.08\bar{3}\: \mathrm{hours}\cdot \frac{60\:\mathrm{minutes}}{1\:\mathrm{hour}}=\fbox{$125\:\mathrm{minutes}$}[/tex]
please help, thank you !
Answer:
0.04658 m from the nut
Explanation:
Recall that torque is defined as the vector product of force (F) times distance (d). Then, given that the force is applied perpendicular to the wrench, gives the sine of the angle (90 degrees) equal to 1, simplifying the calculation which consists basically on solving for d in the equation:
2.25 N*m = 48.3 N * d
d = 2.25 /48.3 m ≈ 0.04658 m