a flat coil of wire consisting of 240 turns, each with an area of 40 cm, is positioned perpendicularly to a uniform magnetic field that increases its magnitude at a constant rate from 0.27 t to -0.77 t in 5.3 s. if the coil has a total resistance of 22 , what is the magnitude of the induced current when the field is -0.25 t?

Answers

Answer 1

magnitude of the induced current        

where  I = 0.5A

 Briefing

Knowing that the formula for magnetic flux is = NBA

Here, N is the number of turns,

B is the magnetic field,

and A is the area of the loop.

Knowing that the coil's EMF will be induced by the rate of change in magnetic flux,

we may calculate it as EMF = NA db/dt.

To find the induced EMF,

we now plug in all values.EMF = 0.2

voltageTherefore, according to Ohm's rule,

Current = EMF/Resistance I = 0.2/0.40.

Visit this link to learn more about the Magnetic field:  

https://brainly.com/question/23096032

#SPJ4


Related Questions

In a series circuit there are 17 light bulbs, each providing 1 ohm of resistance. What is the total resistance?.

Answers

In a series circuit there are 17 light bulbs, each providing 1 ohm of resistance , the total resistance is 17 ohms.

In a series circuit, the total resistance is equal to the sum of the resistances of all the components in the circuit. In this case, there are 17 light bulbs, each providing 1 ohm of resistance, so the total resistance of the circuit is 17 ohms.

This can be calculated using the equation:

Total Resistance = R1 + R2 + R3 + ... + Rn

where R1, R2, R3, etc. are the resistances of the individual components in the circuit.

In this case, the total resistance would be:

Total Resistance = 1 ohm + 1 ohm + 1 ohm + ... + 1 ohm

This simplifies to:

Total Resistance = 17 ohms

So the total resistance of the circuit is 17 ohms.

To know more about resistance

https://brainly.com/question/29427458

#SPJ4

What are examples of genetic risk factors?

Answers

Risk Genetic a medical condition that affects one or more of your immediate relatives. having a family member who was diagnosed with a disease at a young age (typically before age 55).

What are two instances of genetic influences?

The reason one child has blonde hair like their mother and their sibling has brown hair like their father, for instance, is genetic. Additionally, genes influence both the gender of newborns and why some diseases run in families.

What elements are deemed genetic?

Genetic factors play a significant role in many diseases. It follows that either all or portion of the risk is inherited from one's parents. One such illness is CADASIL, which is brought on by a mutation in just one gene.

To know more about genetic risk factors visit :-

https://brainly.com/question/7244153

#SPJ4

Explain the characteristics of galaxies and galaxy
clusters.

Answers

Answer:

Some of the key characteristics of galaxies and galaxy clusters include their size, shape, and structure. Galaxies and galaxy clusters are also distinguished by the presence of dark matter, a mysterious substance that is thought to make up most of the mass in the universe. Additionally, galaxies and galaxy clusters are important sites for the formation and evolution of stars and other celestial objects.

Explanation:

Galaxies are vast collections of stars, gas, and dust that are held together by gravity. They come in a variety of shapes and sizes, ranging from small, irregular galaxies to large spiral galaxies with well-defined arms. Galaxies also contain a central region known as the nucleus, which may be home to a supermassive black hole.

Galaxy clusters are groups of galaxies that are held together by gravity. They are the largest structures in the universe, and they can contain hundreds or even thousands of individual galaxies. Galaxy clusters are typically separated by vast distances, and they are bound together by the mutual gravitational attraction of their constituent galaxies.

the sun burns ______ to make _____

A. hydrogen, helium
B. helium, hydrogen
C. propane, butane
D. butane, propane

Answers

Answer: A
Explanation: In the core of the Sun hydrogen is being converted into helium. This is called nuclear fusion. It takes four hydrogen atoms to fuse into each helium atom. During the process some of the mass is converted into energy.

Executive agreements differ from formal treaties in that they 1) have been ruled unconstitutional by the U.S. Supreme Court. 2) must be approved by the U.S. Supreme Court but not by Congress. 3) do not have to be approved by the Senate 4) do not have to be approved by the House. generally formulated at 5) meetings of the United Nations. are Question 12 (1 point) The President can influence the legislative process through 1) communicating with the American public 2) leading his/her political party. 3) reporting on the State of the Union. 4) all of the above.

Answers

Executive agreements differ from formal treaties in that they 1) have been ruled unconstitutional by the U.S. Supreme Court. meetings of the United Nations. Option 5

The president can influence the public through : all of the above. Option 4

What is known as executive agreement?

A treaty is ratified by the legislature, whereas executive agreements are ratified by the heads of government of two or more nations. To differentiate them from agreements that are legally enforceable, such as treaties, executive agreements are seen as having political force.

Presidents have routinely negotiated international accords on behalf of the United States without the Senate's advise or assent in recent decades. We refer to these as "executive agreements." Executive agreements are still enforceable in accordance with international law even when they are not submitted to the Senate for approval.

Read more on executive agreements here:https://brainly.com/question/677960

#SPJ1

henrietta leavitt found a relationship using the cepheid variables (in a star cluster) to help us determine distances. what was the correlation she found between the luminosity of a variable star and the period?

Answers

Heritage of Leavitt Using Cepheid variables, the distance to Andromeda of 2.5 million light-years was determined in the 1920s, demonstrating the galaxy's significant distance from the Milky Way.

What does the Cepheid variable do to let us calculate their luminosity?

Distance Measuring with Cepheid Variables After determining a distant Cepheid's period, its brightness can be calculated using the known characteristics of Cepheid variables.

How can one determine the distances of star clusters or galaxies using the Cepheid period-luminosity relation?

A Cepheid's fluctuation period correlates closely with its luminosity, as Henrietta Swan Levitt observed. The Cepheid becomes increasingly bright as the variability period lengthens. Astronomers have measured the distances to distant galaxies by observing Cepheid variables.

To know more about henrietta leavitt  visit :-

https://brainly.com/question/11303848

#SPJ4

what must you do to keep it in focus? what must you do to keep it in focus? increase the f -stop value. move the lens away from the sensor or film. decrease the f -stop value. move the lens closer to the sensor or film. none of the above.

Answers

C) Move the lens closer to the sensor or the film . Option (c) is the right           answer.

Assume that we are trying to take a picture or photograph of a moving object

as we know, the f-stop value tells us about the color of the image. That means it actually depicts that how dark is the image. would be. in simple words, it determines the amount of light that will be able to enter to the eye. Therefore, option a,b are incorrect.

Now the focus length of the camera is always fixed. Now let our object is moving away from the lens, then to keep it in focus, the camera must be moved closer to the object. This step is essential to keep focal length constant.

Hence, the correct option is (c).

To learn more about Focal length:

https://brainly.com/question/14995884

#SPJ4

A dynamo in a watch transfers 0.05 W of power every second to make a hand turn. Calculate the energy this transfers to the hand.

Answers

The energy transfered to the hand of the watch is 0.05 J.

What is energy?

Energy is the ability or the capacity to perform work.

To calculate the energy transfered to the hand, we use the formula below.

Formula:

E = Pt...................Equation 1

Where:

E = Energy transferedP = Power transferedt = Time

From the question,

Given:

P = 0.05 Wt = 1 seconds

Substitute these values into equation 1

E = 0.05×1E = 0.05 J

Hence, the energy transfered is 0.05 J.

Learn more about energy here: https://brainly.com/question/25959744

#SPJ1

projectile a is launched horizontally at a speed of 20 meters per second from the top of a cliff and strikes a level surface below, 3 seconds later. projectile b is launched horizontally from the same location at a speed of 30 meters per second. approximately how high is the cliff?

Answers

Answer:

the answers are 3 seconds and 44.1 m

Answer:

44M

Explanation:

the sound intensity levels for a machine shop and a quiet library are 85 db and 40 db, respectively. what is the difference between the intensity of the sound in the machine shop and that in the library?

Answers

A point's sound intensity level is expressed in logarithmic units of decibels (dB) as a ratio between the sound there and the threshold of hearing.

A 30 dB sound has what kind of volume?

Whispering is audible at 30 dB. 40 dB: Quiet sounds from the library. Fridge at 50 dB. Electric toothbrush at 60 decibels.

What decibel sound has a 95-decibel intensity?

In decibels, sound is measured (dB). A motorcycle engine running is around 95 dB louder than a whisper (30 dB louder than typical conversation). Long-term exposure to noise levels above 70 dB may cause hearing impairment. Your ears may get immediately harmed by loud noises over 120 dB.

To know more about sound intensity levels visit :-

https://brainly.com/question/15089336

#SPJ4

How do you find the missing angles when a transversal cuts through parallel lines?

Answers

To find the missing angles when a transversal cuts through parallel lines, use the properties of parallel lines and the corresponding angles formed when they are cut by a transversal. The angles will always add up to 180°.

To find the missing angles when a transversal cuts through parallel lines, you can use the properties of parallel lines and the corresponding angles formed when they are cut by a transversal. When a transversal cuts through two parallel lines, corresponding angles are equal, alternate angles are equal and consecutive angles are supplementary, meaning they add up to 180°. You can use these properties to calculate the missing angles. For example, if you know one angle and its corresponding angle are equal, you can use that information to calculate the other missing angles. You can also use the fact that alternate angles are equal and consecutive angles are supplementary to calculate the missing angles. Once you have all the angles, you can verify your answer by making sure that all of the angles add up to 180°.

Learn more about transversal here

https://brainly.com/question/13618693

#SPJ4

 


A narrow beam of light is travelling through a transparent liquid. It meets the surface as shown, at
an angle of incidence of 40°. The refractive index of the liquid is 1.5.
air
liquid
40
What is the angle of refraction as the light enters the air?
A 25
B 27
C 60°
D 75

Answers

Answer:

the correct answer is B) 27.

Explanation:

To find the angle of refraction, you can use the formula:

n1 * sin(angle of incidence) = n2 * sin(angle of refraction)

where n1 and n2 are the refractive indices of the two media (in this case, air and the liquid), and the angles are measured from the normal to the surface.

Plugging in the values from the problem, we have:

1 * sin(40) = 1.5 * sin(angle of refraction)

Solving for the angle of refraction, we get:

angle of refraction = sin^-1(1/1.5 * sin(40))

Using a calculator or a table of trigonometric functions, we can find that the value of sin^-1(1/1.5 * sin(40)) is approximately 27.3 degrees.

Therefore, the correct answer is B) 27.

(a) what is the loss of kinetic energy (ki - kf) in the situation described in the example?

Answers

The loss of kinetic energy of the moving car is 238,866 J

Kinetic energy is the energy in a moving object due to its motion,

K.E. = 1/2 M[tex]V^{2}[/tex]

Given in the question,

Mass of big car M1 = 1640 kg

Mass of small car M2 = 820 kg

Initial velocity of big car V1 = 0

Initial velocity of small car V2 = 25.6 km/s

using the principle of conservation of momentum,

Total momentum before collision = total momentum after collision

M1V1 + M2V2 = V (M1+M2)

1640 × 0 + 820×25.6 = V ( 1640+ 820)

V = 820 ×25.6 /2460

   = 8.53 Km/s

So, loss of kinetic energy of the small car = 1/2 M2[tex]V^{2}[/tex]

                                                                     = 1/2 × 820× ([tex](25.6)^{2}[/tex] - [tex](8.53)^{2}[/tex])

                                                                     = 238,866 J

The given question is incomplete, the complete question is

An 1640 kg car stopped at a traffic light is struck from the rear by a 820 kg car. The two cars become entangled, moving along the same path as that of the originally moving car. If the smaller car were moving at 25.6 m/s before the collision, what is the velocity of the entangled cars after the collision?

What is the loss of kinetic energy (Ki - Kf) in the situation described in the example?

To know more about kinetic energy here

brainly.com/question/26472013

#SPJ4

A 65kg bicyclist is coasting to the right while experiencing a 50N drag. Neglect any friction impeding the motion. What is the magnitude of the net force on the bicyclist? What is the magnitude of her acceleration?

Answers

The net force acting on the bicyclist along with its own weight is 687 N. The magnitude of acceleration for this force is 10.56 m/s².

What is force?

Force is a physical quantity characterised by its magnitude and direction. Force deform an object or changes its state of rest or motion. Force of a moving body  is the product its mass and acceleration.

The normal force acting on an object by ts weight = mg

thus normal force on 65 kg bicyclist = 65 Kg × 9.8 m/s² = 637 N.

The dragging force acting on him = 50 N.

The resultant force = 637 N + 50 N = 687 N

Force = m a

acceleration  = force/ mass

 = 687 N/ 65 Kg

 = 10.56 m/s².

Therefore, the net force on the bicyclist is 687 N with an acceleration of 10.56 m/s².

To find more on acceleration, refer here:

https://brainly.com/question/12550364

#SPJ1

What is the force required to keep the object sliding on a surface with the same speed?

Answers

The amount of force necessary to maintain an object is moving at precisely the same speed—or sliding friction—is measured. The object begins to move after the imparted force. static or sliding friction measurement.

The definition of friction force

Intensity of Friction What Is Frictional Force? Friction is the force that prevents motion when one object's face scrapes against another's surface. The mechanical advantage of a machine is diminished by friction, or even more specifically by a decline in the output to input ratio.

Why is friction an antagonistic force?

Rubbing acts as just a repelling force when one body moves through a surface. Friction is the result of two surfaces interacting with one another. If a layer is not fluid, then objects cannot move through it.

To know more about frictional force visit:

https://brainly.com/question/204867

#SPJ4

A car travels with tangential speed V1 around curve of radius and turns to the left; as shown by the rear view of the car in Figure A force diagram of the forces exerted on the car with speed of 5 m/s as it turns is shown in Figure 2. force diagram of the forces exerted on the car with speed as it turns around the same curve of the same radius with the same tangential speed is shown in Figure 3. The speed of the car is most nearly

Answers

The speed of the car from the given three figures is most nearly 15 m/s.

How to calculate the speed of the car?

For figure 2,

we know the exerted force speed is 5 m/s, so frictional force is

[tex]F_f[/tex] = [tex]\frac{Mv^2}{\gamma}[/tex]

= [tex]\frac{M(5)^2}{\gamma}[/tex]

For figure 3,

we know the frictional force is 9. So,

9 [tex]F_f[/tex] = [tex]\frac{Mv^2}{\gamma}[/tex]

Then using two figures we can calculate the speed of the car.

equation figure 3 / equation figure 2

=> 9 = v^2 / (5)^2

=> v^2 = 9*(5^2)

=> v^2 = 225

=> v = 15 m/s

Thus, the speed of the car is 15 m/s.

Your question is incomplete, but most probably your full question was

(image attached)

Learn more about speed here:

brainly.com/question/24739297

#SPJ4

Why was sonar technology so important during the Cold War?

Answers

It was created with the aid of ground-breaking research into the ways in which sound travels across water and was intended to keep an eye on the Soviet Union's expanding submarine menace.

What makes sonar so crucial?

To "see" in the water, sonar uses sound waves.

Sonar is largely used by NOAA scientists to create nautical charts, find underwater navigational hazards, find and map things on the bottom like shipwrecks, and map the actual seafloor.

Leonardo da Vinci utilised a tube introduced into the water to listen for vessels in order to employ the technology for the first time, in 1490. To combat the rising threat of submarine warfare, it was developed during World War I, and by 1918, a functioning passive sonar system was in use.

To know more about sonar, visit:

brainly.com/question/20510435

#SPJ4

Explain how an object with a higher temperature can have less thermal energy than an object with a lower temperature.

Answers

An object with the higher temperature can have less thermal energy than an object with the lower temperature because of the mass difference.

The thermal energy of an object is given by the relation,

Q = mC∆T

Where,

Q is the thermal energy,

m mass of the bodies,

C is the specific heat capacity and,

∆T is the change and temperature.

As we can see, from the above relation that thermal energy is depending on the specific heat and mass of the body. We can understand this thing by the example of an Iceberg and a cup of hot tea. The Iceberg is at a much lower temperature but it has a higher amount of thermal energy because it has a bigger amount of mass.

To know more about thermal energy, visit,

https://brainly.com/question/19666326

#SPJ4

CONVERT A COAL PRICE OF $90/TON TO $/MMBTU, ASSUMING A HEAT CONTENT OF 7,000 BTU PER POUND
A: $3.00/MMBtu
B: $34.50/MMBtu
C; $2.80/MMBtu
D: $6.42/MMBtu
E: $3.46/MMBtu

Answers

The coal price of $90/ton with a heat content of 7000 BTU per pound is D: $6.42/MMBtu.

The formula to calculat mmbtu from tons is as follows -

Price per mmbtu = price per ton × 500/ BTU per pound

Keep the values in formula to find the price per mmbtu

Price per mmbtu = (90×500)/7000

Performing multiplication in numerator on Right Hand Side of the equation

Price per mmbtu = 45000/7000

Performing division on Right Hand Side of the equation to find the price per mmbtu for coal

Price per mmbtu = $6.42/mmbtu

Thus, the correct option is D: $6.42/MMBtu.

Learn more about coal -

https://brainly.com/question/22647554

#SPJ4

What is the distance between two wave front?

Answers

The distance between two wavefronts is termed as wavelength.

The wavelength of a sound wave is defined as the space between two adjacent wavefronts. The number of wavefronts the observer detects during a period of time can be used to calculate the wave's frequency.

The medium (such as a vacuum, air, or body of water) through which a wave travels determines its wavelength. Waves can be anything from music to light to water to periodic electrical signals. While light and other electromagnetic radiation use variations in electric and magnetic field strength, sound waves are variations in air pressure. Water waves are fluctuations in a body of water's height. Atomic locations change during the shaking of a crystal lattice.

To know more about wavelength click here,

brainly.com/question/10728818

#SPJ4

Write Informative Text What type of change mut occur for pure ubtance to combine into new material? Name a few kind of ynthetic material that can be produced by thi type of change

Answers

Synthetic fibers, ceramics, polymers, artificial foods and pharmaceuticals, and composites are all examples of synthetic materials. Synthetic fibers are elastic.

They can be used to produce garments as well as other items. Synthetic fibers include rayon, polyester, and nylon. Synthetic fibers (man-made fibers) are created by combining chemical monomers to form polymers through a chemical reaction known as polymerisation. Sodium hydroxide and carbon disulphide are commonly used compounds (derivatives of coal, oil, or natural gas). Synthetic materials, on the other hand, are man-made and cannot be found in nature. Synthetic items are typically generated in laboratories by combining various chemicals or by preparing molecules and substances in a laboratory.

Learn more about gas here-

https://brainly.com/question/15265703

#SPJ4

a toad leaps straight upward. during takeoff, a 42 n normal force from the ground causes the toad to accelerate upward at 3.5 m/s/s. what is the mass of the toad?

Answers

The mass of the toad is 12kg if a 42N normal force from the ground causes the toad to accelerate upward at 3.5m/sec²

We know that according to newton second law of motion, which states that  acceleration increase of a molecule is corresponding to the power applied to it and is toward this power. The proportionality steady is the mass m for a consistent mass molecule or an unbending body going through translatory movement whose inactivity can be decreased to a point.

We know that from newton second law of motion F=ma  which is derived from the formula F=dp/dt where dp is the rate of change of momentum.Here. m is the mass of the body and a is the acceleration of the body.

We have F=42N,a=3.5m/sec²,m=?

Therefore,42N=m×3.5m/sec²

=>m=42N/3.5m/sec²

=>m=12kg

Hence, mass of the toad is 12kg.

To know more about newton second law of motion, visit here:

https://brainly.com/question/13447525

#SPJ4

assuming that the styrofoam absorbs a negligibly small amount of heat and that no heat was lost to the surroundings, what is the specific heat capacity of the metal, cmcmc m ? express your answer numerically in joules per kilogram kelvin.

Answers

The specific heat capacity of the metal, cm is 214.87 J/kg-k.

As per the given data,

we need to find  the specific heat capacity of the metal, cm.

According to the above question,

it is given that,

Weight of  chunk of an unknown metal is 1.00kg

chunk has been in boiling water for several minutes and it is quickly dropped into an insulating Styrofoam beaker containing 1.00kg of water at 18.0°C.

After stirring for 5.00 minutes, the water's temperature has reached a constant value of 22.0°C .

The water specific heat capacity  is cw = 4190J/(kg)  

Now,

temperature of metal is 100 degree celsius ( water boils at 100 degree celsius )

equilibrium temperature = 22 degree celsius

specific heat capacity of water Cw= 4190 J/kg-K

According to question, specific heat capacity of metal be Cm

Therefore,

mass of metal that is Mm = 1 kg

mass of water that is Mw = 1 kg

we know that,

heat energy lost by metal is equal to  heat energy gained by water

(assuming no heat is lost to the surroundings)

heat energy lost by metal = Mm * Cm * (100 - 22)

heat energy lost by water = Mw * Cw * (22 - 18 ) (given - initial temperature of water = 18 degree celsius)

therefore,

Mw * Cw * (22 - 18 ) = Mm * Cm * (100 - 22)

4190 * 4 = Cm * 78

Cm = 214.87 J/kg-k

Hence, the specific heat capacity of the metal, cm is 214.87 J/kg-k.

For more such questions on Heat Capacity:

https://brainly.com/question/28921175

#SPJ4

Complete Question:

A 1.00kg chunk of an unknown metal that has been in boiling water for several minutes is quickly dropped into an insulating Styrofoam beaker containing 1.00kg of water at 18.0°C. After gently stirring for 5.00 minutes, you observe that the water's temperature has reached a constant value of 22.0°C . The specific heat capacity of water is cw = 4190J/(kg-K) . Assuming that the Styrofoam absorbs a negligibly small amount of heat and that no heat was lost to the surroundings, what is the specific heat capacity of the metal cm. Assuming that the Styrofoam absorbs a negligibly small amount of heat and that no heat was lost to the surroundings, what is the specific heat capacity of the metal, cm?

true or false? a point that moves along the x-axis with constant, positive acceleration must always be moving from left to right

Answers

The statement is false. Acceleration is the rate at which velocity changes over time, both in terms of speed and direction.

A point or object travelling in a straight path is accelerated if it accelerates or decelerates. Even if the speed is constant, motion on a circle is accelerated because the direction is always changing. The rate of change of displacement is defined as velocity. The rate of change of velocity is defined as acceleration. Because it includes both magnitude and direction, velocity is a vector quantity. Because it is simply the rate of change of velocity, acceleration is likewise a vector quantity. Acceleration is the change in speed or direction of an object. The rate at which velocity varies is defined as acceleration. Keep in mind that velocity has two components: speed and direction.

Learn more about acceleration here-

https://brainly.com/question/12550364

#SPJ4

What it means gains momentum ?​

Answers

Answer:

to move faster

Explanation:

momentum, product of the mass of a particle and its velocityit has both magnitude and direction. Isaac Newton's second law of motion states that the time rate of change of momentum is equal to the force acting on the particle. See Newton's laws of motion.

Answer:

gaining speed

Explanation:

Two identical steel columns are used to support a level beam. Heat Heat B Image not displaying? As Column A gets heated, what happens to the ball? It moves left along the beam It falls straight down from its current position It moves right along the beam Nothing A streetlight is in a windstorm that exceeds the design rating. E Wind direction Light pole C D Base (в Ground Image not displaying? Which is the most likely location for a crack to start? A B D E An air tank is exposed to ambient temperature. If you set the air pressure of the tank to 35 psi for a leak test and find that 24 hours later the tank's pressure has increased, what could've happened? The tank leaked The tank drew in additional air The ambient temperature increased The ambient temperature decreased

Answers

A vertical structural component called a steel column is employed in building to offer crucial support. They might transfer loads from beams, ceilings, floor slabs, or roof slabs to floors or foundations, or they might transport loads in compression.

Additionally, bending moments along cross-section axes may be present in steel columns. Explanation: Beam-column structural members are those that experience simultaneous heavy axial compressive loads and bending. Only the existence of eccentric load application, end moments, and transverse loads distinguishes a beam-column from a column. 3. Describe girt. They might transfer loads from beams, ceilings, floor slabs, or roof slabs to floors or foundations, or they might transport loads in compression. Additionally, bending moments near cross-section may exist in steel columns.

To learn more about compression please click on below link

https://brainly.com/question/14828391

#SPJ4

Why is CO2 so important to the food industry?

Answers

CO2 is utilized for a variety of applications throughout the entire food industry.In addition to being used to create sugary beverages, CO2 is also employed in a number of other processes, including the drying of produce to lengthen its shelf life, the usage of dry ice to keep goods cool during shipping, the tranquilization of animals before to slaughter, and many others.

What are the food industries?

The manufacturing of food and beverages is actually made up of more than 30 different industries.Slaughterhouses, the preparation of meat, poultry, & fish, grain mills, maltings, bakery, sugar confectioneries, the preparation of vegetables and fruits oils and fats, margarine, and oil seeds, pasta, baby food, and milk products are a few examples.

What are the food industry's four divisions?

The agricultural service, producers, processors, & marketers are the major segments of the food industry.

To know more about  food industry visit:

https://brainly.com/question/15378284

#SPJ4

What evidence supports the theory of ocean floor?

Answers

There is a sizable mountain range slicing through the ocean floor. Far from the ridges, deep pits can be found. Deeply below sea level, guyots have eroded tops.

What are the three signs of a spreading seafloor?

The evidence is gathered. These conclusions are: There is a sizable mountain range slicing through the ocean floor. Far from the ridges, deep pits can be found. Deeply below sea level, guyots have eroded tops.

What proof is there that the ocean floor is expanding?

Earthquake studies. Seismic investigations that show earthquakes happen along a mid oceanic ridge's rift valley and the cross-cutting fractures that offset it provide additional evidence for the spreading of the sea floor.

To know more about ocean floor visit :-

https://brainly.com/question/9046600

#SPJ4

which produces the greater change in kinetic energy (assume that all of the work goes into kinetic energy)? group of answer choices . exerting a 10 n horizontal force through a distance of 5 m exerting a horizontal force of 40 n through a distance of 1m exerting a horizontal force of 20 n through a distance of 2 m exerting a 30 n horizontal force through a distance of 1.5 m

Answers

Since we know that kinetic energy equals work done, kinetic energy will produce more in the first scenario.Because the first case's work was more than the second, kinetic energy exists.

Does kinetic energy vary as a result of work?

According to the work-energy theorem, the net work performed by forces acting on an item equals the change in kinetic energy.

When does kinetic energy become more significant?

The kinetic energy of an object, in contrast to potential energy, is relative to other fixed and moving things that are present in its immediate vicinity. For instance, if the object is positioned at a higher height, its kinetic energy will be higher

For more information about Kinetic Energy

Visit:

https://brainly.com/question/26472013

#SPJ4

what building stands at 1,776 feet tall in a nod to the declaration of independence?

Answers

The building that stands at 1,776 feet tall in a nod to the Declaration of Independence is the One World Trade Center in New York City.

The One World Trade Center is the main building of the World Trade Center complex, which was built on the site of the original World Trade Center buildings that were destroyed in the September 11, 2001 attacks.

The height of 1,776 feet was chosen for the One World Trade Center as a symbolic reference to the year 1776, when the Declaration of Independence was signed. The One World Trade Center is the tallest building in the United States, and it is one of the tallest buildings in the world. It features a distinctive spire at the top that is lit up at night, making it a recognizable landmark on the New York City skyline.

To know more about Trade center

https://brainly.com/question/28588765

#SPJ4

Other Questions
What is a nucleotide?O A matched pair of amino acidsO A building block of the nucleusO A single "letter" of DNAAn entire strand of DNA What statement from "Nature" best represents Emerson's philosophical vision as presented in the selection?1. In the woods, too, a man casts off his years, as the snake his slough, and at what period soever of life is always a child2. In the wilderness, I find something more dear and connate than in the streets or villages3. Yet it is certain that the power to produce this delight does not reside in nature, but in man, or in a harmony of both4. Then there is a kind of contempt of the landscape felt by him who has just lost by death a dear friend A rectangle has an area of 24 square units and a side length of 2 3/4 units. Find the other side length of the rectangle. (Answer needs to be a mixed number) Name the angle pairs that are vertical angles.Select all angle pairs that are vertical angles.A. F and LB. E and NC. R and VD. Y and W Classical Greece and Rome have contributed greatly to our current understanding of democracy. In ancient Greece, citizens were directly responsible for participating in government decisions. In Rome, the citizens elected government officials to make decisions on their behalf as part of a republican government. Both systems of democracydirect and representativehave influenced the US political system.After learning about the history of ancient Greece and Rome, what do you think are the benefits of a democratic system? In what ways did democracy serve Greece and Rome? Has there been a time when democracy didnt serve Greece or Rome in a way that was beneficial? What circumstances contributed to the failures of democracy you learned about in the lessons on ancient Greece and ancient Rome? Are there any potentially negative aspects of democracy? Why or why not? Choose the correct form of the verb to translate the phrase in italics to Spanish.you (to a friend) (are)est estoyestnestmosests How might the story "He" reflect the influence of Regionalism in American literature?a) It criticizes the ignorance of rural people.b) It focuses on the daily lives of rural people.c) It creates realism with harsh, disturbing details.d) It has meaning only for people from the South. 3.Two Cars, A and B, (starting, at the same time, from the same point) are movingwith average speeds of 40 km/h and 50 km/h, respectively, in the same direction.Find how far will Car B be from Car A after 3 hours. I DONT WANT ANY LINKS Which phrase best completes the diagram to show how the United Statesachieves its foreign policy goal of keeping the country safe?Goals of U.S.Foreign PolicySpreadingdemocracyEstablishing trade?O A. Isolating other countries from each otherO B. Limiting foreign economic growthO C. Promoting peace around the worldO D. Making alliances with terrorist groups 45. Common crops in Central Africa are .... and ... and .... Greyson reads 36 1/3 pages in 40 minutes, or 2/3 ofan hour. At this rate, how many pages can he readin one hour? PLEASE HELP I GIVE BRAINLIEST Calculate the surface area of the square pyramid below.yd2 PLEASE HELP!!! DUE SOON!!!Q.1. Twain was nervous about taking the job at the newspaper because heA. worried about moving to a new place B. feared leaving his good friends behind C. felt inexperienced and unfit for the position D. wished to make more than twenty-five dollarsQ.2. Twain's biggest fault when he worked as a printer was that he A. read too much B. set type too slowly C. bothered the apprentices D. complained to the foremanQ.3. What did the paper's editor tell Twain to do so that people would have confidence in a story? A. go to the source and get absolute facts B. write in a fancy manner C. do anything to fill all of the pages D. trust that people are telling the truth Suppose you want to buy a $151,000 home. You found a bank that offers a 30-year loan at 4.7% APR. What will be your monthly payment? (Round to the nearest cent.) Memory refers to the processes that are used to acquire, store, retain, and later retrieve information (Cherry).How do I analyze the sentence above? True/False: Energy cant be created or destroyed: it can only be transferred from one place to another. Can someone please tell me the answers There are 9 apples in eachBox. How many Apples are in in 6 boxes Help please with number 3 dont worry I will give brainliest to the best answer!